}

Maintenance / Repairs To Tp Furnitures , Sofa Set And Beds At Afs Bidar, GE AF BIDAR-Karnataka

Military Engineer Services-MES has published Maintenance / Repairs To Tp Furnitures , Sofa Set And Beds At Afs Bidar. Submission Date for this Tender is 16-07-2021. Furnitures Tenders in GE AF BIDAR Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

28226755
Corrigendum : Maintenance / Repairs To Tp Furnitures , Sofa Set And Beds At Afs Bidar
Open Tender
Indian
Karnataka
GE AF BIDAR
16-07-2021

Tender Details

Maintenance / Repairs To Tp Furnitures , Sofa Set And Beds At Afs Bidar

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 09-Jul-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 16-07-2021
2 13-Jul-2021 Amendment to tender documents Other 16-07-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 52000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: MAINTENANCE / REPAIRS TO TP FURNITURES, SOFA SET AND BEDS AT AFS BIDAR.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Repairs To Sofa Set 4/5 seater FD-281: \nRemoving of worn out upholstery & U Foam and Supplying and fixing new U- foam cushion (ISI Marked) 40 Density of size as per Drg including long cloth lining inside and new tapestry cloth cover as per sample and shade as approved by Engr-in-Charge in consultation with users duly stitched and provided with nylon zip. The cost of tapestry cloth shall not be less than Rs 250/- per metre.\nNote:- Each cushion with tapestry cover shall be measured and paid as one unit. BI01010001010000000000000515BI0100001113 450 Each
2 2 Removing the existing broken/damaged arms of sofa and S&F new arms of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish, etc complete, all as directed and shown on Drg.\nNote:-(i)Each arm will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. BI01010001010000000000000515BI0100001114 30 Each
3 3 Removing the existing broken/damaged legs of sofa and S&F new legs of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish, etc complete, all as directed and shown on Drg.\nNote:-(i)Each leg will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. BI01010001010000000000000515BI0100001115 30 Each
4 4 Removing the existing broken/damaged battens and S&F new battens of sofa of existing size and shape, made out of well seasoned first class teak wood, including polishing to glossy finish, etc complete, all as directed and shown on Drg.\nNote:-(i)Each batten will be measured and paid as one unit. (ii)Tightening of sofa frame wherever required shall be deemed to be included in the rate quoted. BI01010001010000000000000515BI0100001116 100 Each
5 5 Prepare the existing surface of wooden furniture of any description by applying sand paper, removing the stains and filling the bore holes, cracks by putting bees wax and chalk powder etc, and apply french polish with rose wood/ walnut colour stainer to the exposed surface. Polishing shall be uniform and shall be glossy finish for sofa set FD-281 as directed by Engr-in-Charge. BI01010001010000000000000515BI0100001117 70 Each Set
6 6 Removing of worn out tapestry cloth and supply of new tapestry cloth for cushions of 40 D size as per existing pattern duly stitched along with zip facility. Tapestry cover as approved by Engr-in-Charge and the cost of tapestry shall not be less than Rs 250/- per metre. BI01010001010000000000000515BI0100001118 300 Each
7 7 CHAIR REVOLVING EXECUTIVE HIGH BACK MAKE GODREJ SERIES(PCH-7001): \nRemoving the unserviceable worn out cloth tapestry and moulded cushion, of seat and back Density 30, and tapestry cloth (quality and shade as approved by Engr-in-Charge) to match the original all as directed. \nNote:- (i) Cost of tapestry cloth shall not less than Rs 250.00 Per mtr. \n(ii) Each chair (seat and back) measured as single unit BI01010001010000000000000515BI0100001119 100 Each
8 8 Removing the unserviceable and worn out gas lift/hydraulic assembly system and S&F new gas lift/hydraulic assembly system to match the original, as directed by Engr-in-charge BI01010001010000000000000515BI0100001120 60 Each
9 9 Removing the unserviceable/broken Pedestal assembly and supply and fix new Pedestal assembly to match the original, as directed. BI01010001010000000000000515BI0100001121 30 Each
10 10 Removing the existing broken castor wheel from chair revolving and supply and fix new castor wheels to match the original, as directed by Engr-in-Charge. BI01010001010000000000000515BI0100001122 180 Each
11 11 Removing the /broken arm rest from chair revolving and supply and fix new arm rest as approved to match the original and as directed as directed by Engr-in-Charge. BI01010001010000000000000515BI0100001123 20 Each
12 12 CHAIR REVOLVING MEDIUM/LOW BACK MAKE GODREJ SERIES(PCH-7001, 7022 R, 6001 R, 6002 R, 5001 D): \nRemoving the unserviceable worn out cloth tapestry and cushion from chair revolving back and seat. S&F new moulded cushion Density 30 and tapestry cloth (quality and shade as approved by Engr-in-Charge) to match the original all as directed. \nNote:- (i) Cost of tapestry not less than Rs 250.00 Per mtr. \n(ii) Each chair (seat and back) measured as single unit BI01010001010000000000000515BI0100001124 125 Each
13 13 Removing the unserviceable and worn out gas lift/hydraulic assembly system and S&F new gas lift/hydraulic assembly system to match the original, as directed. BI01010001010000000000000515BI0100001125 80 Each
14 14 Removing the unserviceable/broken Pedestal assembly and supply and fix new Pedestal assembly to match the original, as directed. BI01010001010000000000000515BI0100001126 20 Each
15 15 Removing the existing broken castor wheel from chair revolving and supply and fix new castor wheels to match the original, as directed by Engr-in-Charge. BI01010001010000000000000515BI0100001127 140 Each
16 16 Removing the /broken arm rest from chair revolving and supply and fix new arm rest as approved to match the original and as directed by Engr-in-Charge. BI01010001010000000000000515BI0100001128 30 Each
17 17 Chair Steel Padded with arms 7003 D: \nRemoving the unserviceable worn out cloth tapestry and cushion from chair back and seat. S&F new moulded cushion Density 30 and tapestry cloth (quality and shade as approved by Engr-in-Charge) to match the original all as directed.\nNote:- (i) Cost of tapestry cloth shall not less than Rs 250.00 Per mtr. \n(ii) Each chair (seat and back) measured as single unit BI01010001010000000000000515BI0100001129 75 Each
18 18 Removing the /broken arm rest from chair Steel Padded and supply and fix new arm rest as approved to match the original and as directed as directed by Engr-in-Charge. BI01010001010000000000000515BI0100001130 30 Each
19 19 Material & labour for removing of rusted leg, supply and fix, welded the same, of size 35mm square MS tube 1.6mm thick, including preparing the new steel surface and applying two coats of synthetic enamel paint, first quality, over a coat of primer, etc complete all as directed by Engr-in-Charge BI01010001010000000000000515BI0100001131 30 Each
20 20 Table Computer Make Godrej Companion C-3: \nRemoving unserviceable/ worn out components of Table Top and S&F the required Top along with appropriate new screws 'L' clamps and new component with beading as per the existing, 18 mm thick pre-laminated particle board, exterior grade,both side lamination, (Shade as that of component removed) and all cut ends of laminated sheet to be sealed by laminated beading as directed by Engr-in-Charge. BI01010001010000000000000515BI0100001132 40 Each
21 21 All as per item No. 5.00 here in before but sides of table. BI01010001010000000000000515BI0100001133 30 Each
22 22 All as per item No. 5.00 here in before but key board of table. BI01010001010000000000000515BI0100001134 30 Each
23 23 All as per item No.5.00 here in before but bottom of table. BI01010001010000000000000515BI0100001135 30 Each
24 24 All as per item No.5.00 here in before but drawer of table. BI01010001010000000000000515BI0100001136 30 Each
25 25 Removing unserviceable /worn out castor wheel and supply and fix new castor wheel with appropriate screws etc. to match the original and all as directed. BI01010001010000000000000515BI0100001137 170 Each
26 26 Removing unserviceable /worn out MS telescopic channel of key board & drawer supply and fix new MS telescopic channel with appropriate screws and all as directed by Engr-in-Charge BI01010001010000000000000515BI0100001138 30 Each
27 27 Removing unserviceable /worn out lock from the drawer of table and supply and fix new brass lock to match the original all as directed by Engr-in-Charge BI01010001010000000000000515BI0100001139 30 Each
28 28 GI Charpoy -FD-220: \nRemoving existing unserviceable long rail of charpoy, GI pipe (1980mm) carefully with out disturbing parts and S&F new long rail including tightening the joints, placing every part in-tact as applicable as per Drg No. - FD- 220. and as directed by Engr-in-Charge \n BI01010001010000000000000515BI0100001140 40 Each
29 29 All as per item No. 6.00 here in before but labour only for short rail GI pipe (900mm) and short rail converted out of long rails obtained from Sl No 6.00. BI01010001010000000000000515BI0100001141 40 Each
30 30 All as per item No. 6.00 here in before but labour only for Leg GI pipe (440mm)and leg converted out of long / short rails obtained from Sl No 6.00 and 6.01. BI01010001010000000000000515BI0100001142 40 Each
31 31 All as per item No. 6.00 here in before but MS check nut BI01010001010000000000000515BI0100001143 50 Each
32 32 All as per item No.6.00 here in before but 3 way elbow. BI01010001010000000000000515BI0100001144 40 Each
33 33 Removing the existing unservieable plywood from GI charpoy and tighting of the frame of GI Charpoys and supply and fixing of 12mm thick ply wood commercial BWR grade duly ISI marked conforming to IS-303 specifications of size as per drg and rounded edges on four corners and fixed with GI bolts and nuts 6mm dia 50 mm long with washers all as specified and directed by the Engr-in Charge. BI01010001010000000000000515BI0100001145 120 Each
34 34 Bed Hard (Steel) without MNF (FD/E6/MAP/08(R): \nRemoving Dents and Bends and welding wherever required for Bed Hard(Steel) Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray. Preperation of bed surfaces after applying putty and red oxide primer and spray painting of bed hard with two coats of synthetic enamel paint of Colour Black as directed by Engr-in-Charge. Note :-Bed Hard(Steel) as a whole shall be measured as single unit. BI01010001010000000000000515BI0100001146 80 Each
35 35 Removing existing unserviceable plywood and S&F of 12 mm thick commercial plywood BWR grade and with ISI mark conforming to IS 303 specification for Bed Hard(Steel) of size as per drawing and as directed by Engr-in-Charge. BI01010001010000000000000515BI0100001147 30 Each
36 36 Charpoy for ORs :- Drg CWE/AF/61/11: \nRemoving Dents and Bends and welding wherever required for Charpoy ORs , Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray. Preperation of bed surfaces after applying putty and red oxide primer and spray painting of charpoy with two coats of synthetic enamel paint of Colour Black as directed by Engr-in-Charge . Note: Charpoy as a whole shall be measured as single unit. BI01010001010000000000000515BI0100001148 100 Each
37 37 Removing existing unserviceable plywood and S&F of 12 mm thick commercial plywood BWR grade and with ISI mark conforming to IS 303 specification for Charpoy ORs of size as per drawing and as directed by Engr-in-Charge. BI01010001010000000000000515BI0100001149 45 Each
38 38 Chair CB steel with Arms:-FD 75(M)\nRemoving the existing unsv seat & back from chair. S& F and welding of 04 Nos MS Flat Angle (02 each on seat and 02 each on back ) as directed by Engr-in-Charge and fixing it with and including new moulded cushion of size 75mm for seat and 50 mm for back of Density 30 and tapestry cloth (quality and shade as approved by Engr-in-Charge). Seat and back supported by 6mm thick Commercial Plywood BWR Grade ISI marked (Beneath cushion) and fixed with GI bolts and nuts 6 mm dia 45 mm long with washers 3mm thick duly drilled 8 holes per chair. Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray. Preparation of chair surfaces after applying putty and red oxide primer and spray painting of chair CB Steel with two coats of synthetic enamel paint of colour Black. Removing existing Arms and S&F of new PVC moulded arms (02 arms) for each chair as directed by Engr-in-Charge.\nNote:- (i) Each chair shall be measured as one unit. BI01010001010000000000000515BI0100001150 150 Each
39 39 Bed Plywood Top:- FD-246/247.\nRemoving the unserviceable ply wood from bed top, tighten the frame, supply and fix 12mm thick ply wood BWR grade duly ISI Marked etc., complete all as shown on drawing.\n BI01010001010000000000000515BI0100001151 200 Each
40 40 Removing u/s long rail, supply and fix long rail made out of seasoned First class hard wood (teak), made to shape, as shown on drg, etc complete.\nNote:- Each long rail shall be measured as one unit.\n BI01010001010000000000000515BI0100001152 30 Each
41 41 Removing existing damaged head board from bed and S&F new head board complete, all as shown on drg and as directed.\nNote:- Each head board shall be measured as one unit.\n BI01010001010000000000000515BI0100001153 25 Each
42 42 Removing existing damaged foot board from bed and S&F new foot board complete all as shown on drg and as directed. \nNote:- Each foot board shall be measured as one unit.\n BI01010001010000000000000515BI0100001154 25 Each
43 43 Preparing the surface of wooden furniture by applying sand paper, removing the stains and filling the bore holes, cracks by applying Bees wax and chalk powder etc, and applying french polish to all faces, applied uniformly, glossy finish, etc complete all as specified and as directed for Bed ply top, Drg No. FD- 246/247.\n BI01010001010000000000000515BI0100001155 100 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail