Tender For Providing Service By Assigning Resource Person For A Period Of 3 Months Supervision Of Process Of Preparation For Nabl Recognition For Chemical Testing Of Potable Water Of Sub-District Level Water Quality Testing Laboratory Including Supply, Installation Of A Requisites For Nabl Recognition Through Nabl Glap Application For 11 Mandatory Parameters And Training On Procedures With Documentation There Off For Loudoha Sub-District Water Testing Laboratory Under Durgapur W/S Division, Phe Dte.(Sl-02) -1 Rendering Training and awareness generation of ISO/IEC: 17025: 2017 protocol deputing Resources person for supervision and hands on training on analysis of 11 mandatory parameter for NABL recognition through NABL GAP android apps Providing service by assigning Tecinical resource team for supervision of NABL recognition (Chemical Testing of potable water) of Block level Water Testing Laboratory under PHE Dte, as per below scope details: Training to the Lab personnel on overview of NABL accreditation as per ISO/IEC 17025:2017 and recognition Guidelines for Laboratory Setup (Standard Instrument, enhancing manpower competency, Standard reference materials, mode of calibration of different instruments) and as per requirement of NABL recognition. To supervise and assist for preparation & record of General Documentation to set up a brief Laboratory operation system management to achieve the requirement of NABL recognition including Reviewing and Up-dating of Documents of Test Procedure & Records Reviewing and Up-dating of Test Procedure & riskanalysis To supervise and assist for preparation & record of Technical Documentation as per requirement of NABL recognision protocol To supervise and assist for preparation & record of Proficiency Testing & the related Technical Documentation for NABL recognition 2 Supply, Installation and traing on calibration & operation of all measuring equipment 2.1 Calibration of all measuring equipment and certificate from NABL accredited calibration laboratory Viz. Analytical Balance, F1 class Weight Box, , Burettes, Pipettes of different volume, Volumetric Flask of different volume, measuring cylinder of different volume, Thermometer, all digital indicator & any other measuring Instruments with traceability certificate as required for NABL GLAP web based application 2.2 Supply of F1 Class Analaytical Certified (as per ISO-17025 requirement) standard weight Box with fractional weight TX-F1-1500- SHI-AM 2.3 Microprocessor based digital, portable Total Dissolved Solid-Temperature meter, with 5-point cabibration facility, auto calibration standard recognition facility, Up to ±1 % full scale accuracy, Measuring range: to 9.99 ppm *, 10.0 ppm to 99.9 ppm, 100 ppm to 999 ppm, 1.00 ppt to 9.99 ppt, 10.0 ppt to 99.9 ppt, Auto temperature compensation facility, with hold & auto off function, complete with Total Dissolved Solid sensor, batteries, carrying kit, 300 ppm calibration standard for drinking water 2.4 Supply of Publication of BIS for IS 3025: Part nos: 4, 5, 8, 10, 11, 16, 21, 23, 40, 32, 46, 2.5 HTC Instrument - Digital Indoor Outdoor Hygro Thermometer with Clock 2.6 High Accuracy Digital Temperature sensor with probe- 2.7 Thermometer 10/50 LC:0.5 2.8 Thermometer 10/100 LC:0.5 3 Supply delivery of Standard reference material required ragents for 11 mandatory parameters, Certified Galssware and sundry items in connection with NABL recognition through NABL GLAP android apps 3.1 pH Buffers - 25°C : Clear, Colourless pH Buffer Solutions. Tested at 25°C and certified by Reagecons ISO 17025 accredited test method. NIST traceable, pH: 4.00 ±0.01@25°C in 500 ml 3.2 pH Buffers - 25°C : Clear, Colourless pH Buffer Solutions. Tested at 25°C and certified by Reagecons ISO 17025 accredited test method. NIST traceable, pH: 7.00 ±0.01@25°C in 500 ml 3.3 pH Buffers - 25°C : Clear, Colourless pH Buffer Solutions. Tested at 25°C and certified by Reagecons ISO 17025 accredited test method. NIST traceable, pH: 10.00 ±0.01@25°C in 500 ml 3.4 Sodium carbonate volumetric standard, secondary reference material for acidimetry, traceable to NIST SRM 3.5 Calcium carbonate volumetric standard. secondary reference matenal for complexometry, traceable to NIST Standard Reference Material (SRM) 3.6 Sodium chloride volumetric standard, SRM for argentometry, traceable to NIST 3.7 Turbidity Standard Non Ratio, 1000 NTU, certified by ISO 17025 Accredited test Method. NIST traceable, 500 ml 3.8 Potassium Chloride, CRM, NIST Traceable, 5 gm 3.9 Potassium Chloroplatinate, 1 gm 3.10 Cobalt Chloride,AR ACS 100 gm 3.11 Hydrochloric Acid 37%, 500 ml 3.12 Sulfuric Acid about 98%, 2000 ml 3.13 Phenolpthelein indicator 3.14 Methyl Red indicator 3.15 Bromocresol Green indicator 3.16 2-Propanol (Iso propyl Alcohol) 3.17 EDTA Disodium salt (Titriplex-III), 100 gm 3.18 Ammonia Solution 25%, 1000 ml 3.19 Ammonium Chloride , 500gm 3.20 Magnesium Sulfate, 500 gm 3.21 Ammonia Buffer ready to use solution, 500 ml 3.22 Hydroxylamine Chloride, 100 gm 3.23 Erichrome Black-T, 25 gm 3.24 Triethanolamine, 500 ml 3.25 Sodium Hydroxide 1N, 2 amp 3.26 Hydrochloric Acid 0.1N, 500 ml 3.27 Murexide (5,5’-Nitrilobarbituric Acid MonoammoniumSalt) for analysis EMPARTA® ACS, 5 gm 3.28 Potassium Chloride analytical grade, 500 gm 3.29 Nitric Acid 69%, 500 ml 3.30 Ethanol, 500 ml 3.31 Silver Nitrate analytical grade 25 gm 3.32 Potassium Chromate analytical grade assay min: 99.5%, pH of 5% soln : 9.02-9.8, 500 gm 3.33 Water for Chromatography, 1 lit pk 3.34 Nessler Cylinder, for colour comparison graduated as per IS 4161 : 1967. 3.35 Beaker 250 ml, Borosilicate glass 3.36 Beaker 100 ml, Borosilicate glass 3.37 Conincal Flask 250 ml, Borosilicate glass 3.38 Wide mouth Borosilicate Glass bottle 1000 ml with glass stopper 3.39 Volumetric Flask Class A, certified as per ISO 17025 requirement set of 6, Cap:100 ml 3.40 Volumetric Flask Class A, certified as per ISO 17025 requirement set of 2, Cap: 500 ml 3.41 Volumetric Flask Class A, certified as per ISO 17025 requirement set of 2, Cap: 1000 ml 3.42 Burette, Class A, certified as per ISO 17025 requirement set of 4, Cap: 50 ml, Glass 3.43 Pipette Graduated Mohr type, Class A, certified as per ISO 17025 requirement set of 6, Cap: 1 ml/0.01 div 3.44 Pipette Graduated Mohr type, Class A, certified as per ISO 17025 requirement set of 6, Cap: 5 ml/0.05 Div 3.45 Pipette Graduated Mohr type, Class A, certified as per ISO 17025 requirement set of 6, Cap: 10 ml/0.1 Div 3.46 Pipette Graduated Mohr type, Class A, certified as per ISO 17025 requirement set of 4, Cap: 25 ml/0.2 Div 3.47 Volumetric Pipette Class A, certified as per ISO 17025 requirement set of 2, Cap: 5 ml 3.48 Volumetric Pipette Class A, certified as per ISO 17025 requirement set of 2, Cap: 10 ml 3.49 Measuring Cylinder Class A, certified as per ISO 17025 requirement 100 ml 3.50 Beaker PP, set of 12, Cap: 50 ml, 3.51 Wash Bottle set of 6, Cap:500 ml PP 3.52 Burette Stand- with single burette clamp, PP coated, set of 2 3.53 Nitrile Gloves, pk of 100 nos 3.54 Safety Googles, pk of 2 nos
