}

Addition Alteration And Improvement To Bldg No P 106 And 106A Under Ge I Navy Jamnagar, GE I NAVY JAMNAGAR-Gujarat

Military Engineer Services-MES has published Addition Alteration And Improvement To Bldg No P 106 And 106A Under Ge I Navy Jamnagar. Submission Date for this Tender is 30-06-2021. Building Work Tenders in GE I NAVY JAMNAGAR Gujarat. Bidders can get complete Tender details and download the document.




Tender Notice

28211589
Corrigendum : Addition Alteration And Improvement To Bldg No P 106 And 106A Under Ge I Navy Jamnagar
Open Tender
Indian
Gujarat
GE I NAVY JAMNAGAR
30-06-2021

Tender Details

Addition Alteration And Improvement To Bldg No P 106 And 106A Under Ge I Navy Jamnagar

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 17-Jun-2021 Corrigendum to Date 8501 Date 30-06-2021
2 23-Jun-2021 CORRIGENDUM TO TENDER AND TENDER BOQ BOQ 30-06-2021
3 23-Jun-2021 CORRIGENDUM TO TENDER Technical Bid 30-06-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 48200.0 /-
Tender Value
INR 24.10 Lakhs /-

BOQ Items

Name of Work: ADDITION/ ALTERATION AND IMPROVEMENT TO BLDG No P -106 & 106A UNDER GE (I) NAVY JAMNAGAR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed. 2 Cubic Metre
2 2 Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed. 120 Square Metre
3 3 Dismantling wrought iron or mild steel work of any description not othewise provided for complete all as directed, 1 Quintal
4 4 Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MD land complete all as directed.\n\n 316 Square Metre
5 5 M&L for plain cement concrete 1:2:4 type B1 using 20 mm graded granite stone aggregate as in cast in situ in cills and other similar bands, plinth courses, roof kerb and padding, bed plates including necessary form work, weathering slightly rounded chamfered angles and throating including demolition of existing padding complete all as specified and directed. 45 Cubic Metre
6 6 Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed. 34 Each
7 7 All as per item No. 6 here-in-above but exceeding 1.5 Sqm but not exceeding 4 Sqm each 52 Each
8 8 Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO , Acco Proof , Impermo , Aqua flex as approved. 202 Kilo Gram
9 9 S&F XPM design aluminium alloy wire mesh, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples along with wooden beads. 30 Square Metre
10 10 S&F anodised aluminium powder coated (thickness or powder coating not less than 50 micron) for doors, windows and ventilator frames and shutters, with or without sash bars, aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws for fixing glass etc. complete all as directed.\nNote: Glass shall be measured and paid separately. 900 Kilogram
11 11 S&F mild steel tubular work in tubular trusses, roof trusses (framed), trussed, purlins, crane gantries, rails and fastemings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 with one coat of zinc chromate primer paint. 260 KG
12 12 S&F pre-painted galvalume (zincalume) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coverings/cladding to walls fixed with self tapping screws as specified. 120 Square Metre
13 13 Material and labour for removal of existing WPT course or any other kind of treatment surface over roof slab including removing layer of plaster and cleaning of surface with wire brushes and water removing of unsolvent materials and and depositing of the same as directed outside MoD land and provide 15 mm thick screed bed/ bedding layer in CM 1:3 mixed with Water Proofing Compound (WPC) as per manufacturer instructions, including finishing the surface fair and even on RCC roof/ parapet once bedding layer of concrete is completely dried and apply oil bound bituminous primer @ 0.30 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.00 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gms/Sqm including minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded as per detailed procedure as directed and finally finished the top surface with two coats of thermal resistant paint complete all as specified and as directed.\nNote: (i) The quoted rate is deemed to be inclusive of taking down & removal of debris , 15 mm thick 1:3 screed & complete APP treatment. (ii) WPC will be paid saperately (iii) The work shall be carried out only through manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the manufacturer for the effectiveness of WPT (iv) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. 860 Square Metre
14 14 M&L for repairing of cracks by cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as directed. 180 Running Metre
15 15 M&L for 25 mm thick plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in levelling course complete all as specified and as directed.\n 35 Square Metre
16 16 M&L 16 to 18 mm thick granite slab (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin counter and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified. 10 Square Metre
17 17 M&L vitrified ceramic tiles in light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.00 sqm in floors etc. tiles laid over and including 15 mm thick screed bed in cement mortar 1 :6 set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed in floor and wall surfaces complete all as directed. (Note : i) Quoted rate is deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work.) 50 Square Metre
18 18 M&L for cement tiles plain of size 300x300x25 mm machine made laid over and including 20mm thick cement mortal screed 1:4, set joined and pointed in cement mortal 1:3 mixed with 5% crude oil by weight of cement over APP membrane complete all as specified and as directed. 800 Square Metre
19 19 S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.\n 65 Square Metre
20 20 S&F 4mm thick figured glass, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed. 3 Square Metre
21 21 M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed. 25 Square Metre
22 22 M&L for complete removal of existing wooden paint and applying two or more coats of French polishing till to obtain mirror finish on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works complete all as directed.\n 220 SQM
23 23 Taking up or down old GI tubing 15 mm bore and connection including cleaning for re-fixing stacking at site where directed . 60 Running Metre
24 24 All as per item No. 23 here-in-above but 20 mm bore of pipe - do - 50 Running Metre
25 25 Fixing only 15 mm bore GI tube medium grade with all new fittings (ISI Marked) fixed to wall and ceiling or laid in floors making necessary connection and testing complete all as directed. 30 Running Metre
26 26 All as per item No. 25 here-in-above but 20 mm bore of pipe - do - 20 Running Metre
27 27 M & L for 15 mm bore steel water tubing medium grade (ISI marked) with fittings all new (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed.\n 30 Running Metre
28 28 All as per item No 27 here -in - above but 20 mm bore of pipe. 30 Running Metre
29 29 Disconnecting existing tanks fixed in any description of capacity exc 500 ltrs but not exc 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified. 4 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail