Military Engineer Services-MES has published Misc B/R And E/M Repairs To Installation Under Ge Birchgunj At Birchgunj Mil Stn , Port Blair. Submission Date for this Tender is 16-07-2021. Electromechanical Work Tenders in Brichgunj Andaman And Nicobar Islands. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Jun-2021 | BOQ Corrigendum | BOQ | 07-07-2021 |
| 2 | 30-Jun-2021 | Date corrigendum | Date | 09-07-2021 |
| 3 | 09-Jul-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-07-2021 |
| Name of Work: MISC B/R & E/M REPAIRS TO INSTALLATION UNDER GE BIRCHGUNJ AT BIRCHGUNJ MIL STN, PORT BLAIR | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Unnamed: 3 | Units | |
| 1 | 1 | Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and as directed by Engineer -in-Charge. | 10 | Each | |
| 2 | 2 | All as per Item No. 1 above but are exc 1.5 Sqm but n.exc 4.00 Sqm complete all as specified and as directed by Engineer -in-Charge. | 10 | Each | |
| 3 | 3 | Taking down shutters of any description n exc 1 Sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge | 11 | Per Leaf | |
| 4 | 4 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge | 4 | Per Leaf | |
| 5 | 5 | Supply and fix 2nd class hardwood, plain, solid, straight chowkats and frames wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed by Engineer -in-Charge. | 0.6 | cubic metre | |
| 6 | 6 | Supply and fix 2nd class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass guaze etc complete all as specified and as directed by Engineer -in-Charge. | 3 | Square Metre | |
| 7 | 7 | Supply and fix 2nd class hard wood 35mm thick, plain, framed, paneled shutter (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge | 12 | Square Metre | |
| 8 | 8 | Supply and fix 2nd class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, gauze etc and fitted to chowkats complete all as specified and as directed by Engineer -in-Charge. | 7 | Square Metre | |
| 9 | 9 | Supply and fix 2nd class hardwood small fittings such as brackets, door, stoppers etc articles n.exc 200 Cubic centimeter each complete all as specified and as directed by Engineer -in-Charge. | 2 | Each | |
| 10 | 10 | Material and labour Cutting holes for inserting hold fasts in PCC block masonry built in cement mortar and making good disturbed portion in PCC 1:2:4 Type B1, as required, depth of embedded portion exceeding half brick but not exceeding one brick walls complete all as specified and as directed by Engineer -in-Charge. | 10 | Each | |
| 11 | 11 | Material and labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 33 | Square Metre | |
| 12 | 12 | Material and labour for one coat of synthetic enamel paint on old painted wood/wood based surfaces exceeding 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. | 28 | Square Metre | |
| 13 | 13 | Supply and fix in repair Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kilogram and fixed | 15 | Each | |
| 14 | 14 | Supply and Fix in repairs 140mm long door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed by Engineer -in-Charge. | 22 | Each | |
| 15 | 15 | Supply and fix sheet glass ordinary quality and glazing with oil putty /wooden beads in square n.exc.0.50sqm in each pane 4 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge. | 10 | Square Metre | |
| 16 | 16 | Supply and fix Figured glass, pin headed type ordinary quality and glazing with oil putty /wooden beads in square n.exc.0.50sqm in each pane 3 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge. | 5 | Square Metre | |
| 17 | 17 | Supply and fix Butt hinges, 100mm length B-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge. | 60 | Each | |
| 18 | 18 | Supply and fix Butt hinges, 75mm length B-12 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge. | 57 | Each | |
| 19 | 19 | Supply and fix as in repairs butt hinges, 100mm length B-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge. | 20 | Each | |
| 20 | 20 | Supply and fix as in repairs butt hinges, 75mm length B-12 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge. | 10 | Each | |
| 21 | 21 | Supply and fix in repairs 20mm dia aluminium anodised curtain rod with brackets, fixed to pelmet box/wall etc complete all as specified and directed by Engineer-in-Charge. | 10 | Running Metre | |
| 22 | 22 | Supply and fix as in repairs 150mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge. | 10 | Each | |
| 23 | 23 | Supply and fix 150mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge. | 23 | Each | |
| 24 | 24 | All as per item No 23 here in before but 100mm long. | 8 | Each | |
| 25 | 25 | Supply and fix as in repairs 100mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge. | 25 | Each | |
| 26 | 26 | Supply and fix as in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge. | 15 | Each | |
| 27 | 27 | Supply and fix 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge. | 15 | Each | |
| 28 | 28 | Supply and fix as in repairs 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge. | 25 | Each | |
| 29 | 29 | Supply and fix as in repairs 100mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge. | 25 | Each | |
| 30 | 30 | Supply and fix 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge. | 10 | Each | |
| 31 | 31 | All as per item No 30 above but 100mm long. | 5 | Each | |
| 32 | 32 | Supply and fix solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge. | 8 | Running Metre | |
| 33 | 33 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge. | 5 | Square Metre | |
| 34 | 34 | Supply and Fix in repairs aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed by Engineer-in-charge. | 30 | Square Metre | |
| 35 | 35 | Supply and fix in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with beading as in pelmet box, complete all as specified and directed by Engineer-in-Charge. | 4 | Square Metre | |
| 36 | 36 | Supply and fix decorative/ fancy designer draphery rod 20 to 25mm dia fixing to wall with suitable brackets etc complete all as specified and directed. | 5 | Running Metre | |
| 37 | 37 | Supply and fix decorative/fancy designer brackets suitable for decorative drapery rods 20 to 25mm dia etc complete all as specified and as directed. | 4 | Pair | |
| 38 | 38 | Taking down aluminium chowkhats or partition frames of any description including glass panes, rubber packing, snap beading, particle board, shera plank etc available at site complete all as specified and as directed | 35 | kilogram | |
| 39 | 39 | Material and labour for anodized aluminium sections (minimum anodisation 15 micron) for Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).for payment purpose ] | 310 | kilogram | |
| 40 | 40 | Supply only 4mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge. | 5 | Square Metre | |
| 41 | 41 | Supply only aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples etc. complete all as specified and as directed by Engineer-in-charge. | 15 | Square Metre | |
| 42 | 42 | Supply only 4mm thick figured glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge. | 2 | Square Metre | |
| 43 | 43 | Supply only 12 mm thick Prelaminatd particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge. | 5 | Square Metre | |
| 44 | 44 | Demolition of solid block masonry of any description complete all as specified and as directed by Engineer -in-Charge. | 7.5 | cubic metre | |
| 45 | 45 | Material and labour for pre-cast cement concrete block PCC 1:3:6 type C1(20mm graded stone aggregate) masonry with solid block exc 10cm in width and setting in CM 1:6 complete all as specified and as directed by Engineer -in-Charge. | 6 | cubic metre | |
| 46 | 46 | All as per item No 45 here in before but except blocks set in CM (1:6) complete all as specified and as directed by Engineer -in-Charge. Note: fair blocks obtained from demolition shall be re used. | 1.5 | cubic metre | |
| 47 | 47 | Material and labour for removing loose and broken concrete by chiselling/picking etc upto a depth of 10 to 30mm from soffit of slab and similar structural members cutting edges clearing the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water and removal of debris to a distance not etc 50m all as specified and including necessary scaffolding etc complete. | 10 | Square Metre | |
| 48 | 48 | Material and labour for application of high build polymer sand mortar in 1;3 using with Nitobond SBR @ 5ltrs per 50kilogram cement on ceiling surfaces 10 to 20 thick in two layers surfaces over slurry priming coat of 1 volume Nitobond SBR to 1 volume water 3 volume fresh cement (5 sqm per litre nito bond SBR)all as per manufacturer’s instructions including preparation of surfaces, complete all as directed by Engr- in- Charge | 10 | Square Metre | |
| 49 | 49 | Material and labour for removing loose and broken concrete by chiseling / picking etc upto a depth of 80 to 100mm from columns, beams and similar structural members, cutting edges, clearing the dismantled portion with wire brushes etc., to remove dust, dirt and other foreign particles etc., and washing with clean water with pressure including necessary scaffolding and removal of debris to a distance n.exc 50m, complete all as specified and as directed by Engineer-in-Charge. | 5 | Square Metre | |
| 50 | 50 | Material and labour for non-shrink, cementitous micro concrete mixed with 12.5mm graded stone aggregate using Renderoc RG or equivalent by weight (18 kilogram Aggregate :25 kilogram Renderoc RG) respectively (as per manufacture’s instruction) laid in average thickness 80 to 100 mm in surface of columns, beams, parapets and similar structural members including use and waste of water tight form work, complete all as specified and as per directed by Engineer-in-Charge. | 0.5 | cubic metre | |
| 51 | 51 | Material and labour for applying one coat epoxy bonding agent @ 2.6 sqm/lit or as per manufactures instruction to old concrete surfaces of columns, beams and similar structural members complete all as specified and as per directed by Engineer-in-Charge. Make Nitobond EP of Fosroc or equivalent | 5 | Square Metre | |
| 52 | 52 | Material and labour for spraying curing compound as per manufactures instruction on freshly cast concrete surfaces all as specified. | 5 | Square Metre | |
| 53 | 53 | Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge. | 6.75 | Quintal | |
| 54 | 54 | Supply and fix rolled mild steel structural steel work of angle, channel etc. confirming to Fe-410-W (grade E 250) quality 'A', fixed as in purlins, brackets etc, complete all as specified and as directed by Engineer -in-Charge. | 210 | kilogram | |
| 55 | 55 | Supply and fix for rolled MS structural steel work of MS plates, angles, channels etc, fixed as in purlins, brackets rafters etc confirming to Fe-290 (grade E-165) | 50 | kilogram. | |
| 56 | 56 | Supply and fix mild steel flat iron as in supports for wind ties, wall ties, clamps and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed by Engineer -in-Charge. | 145 | kilogram | |
| 57 | 57 | Supply and fix mild steel articles such as hold fasts conforming to IS-2062 and grade E-165 (Fe-290), including riveting/or welding and fixing with screws, bolts, etc. complete all as specified and as directed by Engineer-in-charge. | 10 | kilogram | |
| 58 | 58 | Supply and fix framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 | 250 | kilogram | |
| 59 | 59 | Supply and fix framed work such as grill gratings etc with ends of bars riveted forged into spikes guard bars barred iron fixed independently in wooden frames and similar work confirming to Fe-290 Gde- 165 , complete all as specified and as directed by Engineer-in-Charge. | 5 | kilogram | |
| 60 | 60 | Supply and fix in repairs mild steel framed work of GDE-410 W as in chajja brackets and stairs (framed) including stringers, treatels, landing, balusters etc including cleats, brackets etc including cutting to required length notching, drilling, fitting rivetting or welding or connecting with nuts or bolts and every workmanship that may be necessary to fabricate finish erect and fixing in the position etc all as specified and as directed | 160 | kilogram | |
| 61 | 61 | Supply and fix Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed by Engineer -in-Charge. | 245 | kilogram | |
| 62 | 62 | Material and labour for one coat synthetic enamel paint on old steel surfaces complete all as specified and as directed. | 60 | Square Metre | |
| 63 | 63 | Material and labour for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge. | 80 | Square Metre | |
| 64 | 64 | Material and labour for preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. | 50 | Square Metre | |
| 65 | 65 | All as per item No here in before but treating small articles such as hold fast, wind ties, wall ties etc area n.exc 0.10 Sqm each. | 0.3 | 100 Nos | |
| 66 | 66 | Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed by Engineer-in-Charge. | 125 | Square Metre | |
| 67 | 67 | Material and labour rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement, complete all as specified and as per directed by Engineer-in-Charge. | 50 | Square Metre | |
| 68 | 68 | Material and labour for rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including cement slurry 3 kilogram/sqm complete all as specified and as per directed by Engineer-in-Charge. | 15 | Square Metre | |
| 69 | 69 | Material and labour for 15mm thick external rendering in two layers of 5mm thick in CM (1:4) mixed with water proofing compound (water proofing compound shall be @3% weight of cement) over and including a coat of 10mm thick in CM (1:6) over brick or concrete surfaces finished even and fair. Note: Supply only WPC will be measured and paid separately | 60 | Square Metre | |
| 70 | 70 | Material and labour for 15mm thick rendering in CM 1:3 on fair faces of brick or concrete surfaces, finished even and fair in sunken floor using water proofing compound all as per manufacturer’s instructions etc, complete all as specified and as directed by Engineer-in-Charge. | 2.5 | Square Metre | |
| 71 | 71 | Supply only water proofing compound (Powder) conforming to IS-2645 1975. | 25 | kilogram | |
| 72 | 72 | Material and labour for painting with two coats of oil bound distemper over a coat of primer on newly plastered or untreated surfaces of walls including necessary preparation of surfaces complete all as specified and as per directed by Engineer-in-Charge. | 50 | Square Metre | |
| 73 | 73 | Material and labour for painting with two coats of oil bound distemper over a coat of primer on newly plastered or untreated surfaces of ceiling including necessary preparation of surfaces complete all as specified and as per directed by Engineer-in-Charge. | 15 | Square Metre | |
| 74 | 74 | Material and labour for two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered wall surfaces including preparation of surfaces etc complete all as specified and as directed by Engineer-in-Charge. | 40 | Square Metre | |
| 75 | 75 | Material and labour for painting with one coat of oil bound distemper on old plastered or untreated surfaces of wall and complete removal of existing treatment if any including necessary preparation of surfaces complete all as specified and as per directed by Engineer-in-Charge. | 30 | Square Metre | |
| 76 | 76 | Material and labour for painting with two coats of oil bound distemper over a coat of primer on old plastered surfaces of internal walls including complete removal of existing treatment complete all as specified and as per directed by Engineer-in-Charge. | 20 | Square Metre | |
| 77 | 77 | Material and labour for taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises and applying water proofing treatment with the following specifications complete all as specified and as per manufacturer’s instructions:- \n(i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement \n(ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kilogram/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. \n(iii) Laying APP membrane (STP Aquashield or equivalent) weighing 3to 4kilogram/sqm, with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm.\n(iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kilogram/sqm over the membrane.\nNote:- Water proofing compound shall be measured and paid separately) | 30 | Square Metre | |
| 78 | 78 | Demolition of RCC in fins, fascia column edges including cutting reinforcement etc, complete all as specified and as directed by Engineer -in-Charge. | 2 | cubic metre | |
| 79 | 79 | Use and waste of Form work to flat surfaces of RCC fins, fascia, chajjas and similar items including edges, for fair finished surfaces complete all as specified and as directed by Engineer -in-Charge. | 13 | Square Metre | |
| 80 | 80 | Material and labour for RCC M-30 (using 20mm graded stone aggregate) as in fins, fascia, chajjas etc, complete all as specified and as directed by Engineer -in-Charge. | 2 | cubic metre | |
| 81 | 81 | Material and labour for 10 mm dia and over, mild steel TMT bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed by Engineer -in-Charge. | 300 | kilogram | |
| 82 | 82 | Material and labour for 6 to 8 mm dia mild steel TMT bars, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed by Engineer -in-Charge. | 85 | kilogram | |
| 83 | 83 | All as per item No 82 here in before but 5 to 10mm dia as in stirrups, spacers all as specified and directed | 45 | kilogram | |
| 84 | 84 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level)as in plinth protection etc complete all as specified and as directed by Engineer -in-Charge. | 15.75 | cubic metre | |
| 85 | 85 | Demolition of cement concrete of any description and in any position complete all as specified and as directed by Engineer-in-Charge. | 3 | cubic metre | |
| 86 | 86 | Material and labour for cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in cills, steps copings, haunching and other similar works or chamfered angles and throating and as directed by Engineer -in-Charge. | 3.5 | cubic metre | |
| 87 | 87 | Material and labour for Plain cement concrete 1:2:4, type B0, (using 12.50mm graded stone aggregate) for Kerbs etc including weathering slightly chamfered angles all as directed by Engineer-in-Charge at site | 9.5 | cubic metre | |
| 88 | 88 | Material and labour for 100mm thick Plain cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection, pavings, laid in panels and finishing fair and even, including necessary form work complete all as specified and as directed by Engineer -in-Charge. | 120 | Square Metre | |
| 89 | 89 | Material and labour for 75mm thick Plain cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection, laid in panels and finishing fair and even, including necessary form work complete all as specified and as directed by Engineer -in-Charge. | 50 | Square Metre | |
| 90 | 90 | Material and labour for Plain cement concrete 1:4:8, Type D2, (using 40mm graded stone aggregate), 75 mm thick in sub-base concrete to pavement | 75 | Square Metre | |
| 91 | 91 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc brushing neat cement slurry with 3 kilogram of cement per Sqm all as specified and as directed | 100 | Square Metre | |
| 92 | 92 | Material and labour PCC 1:4:8 D2 (40mm graded aggregate) 150mm thick for sub base path/hard standing etc | 50 | Square Metre | |
| 93 | 93 | Material and labour PCC 1:2:4 B1 (20mm graded aggregate) 100mm thick for hard standing all as specified and directed by eng-in- charge | 50 | Square Metre | |
| 94 | 94 | Material and labour for 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'B' etc., all as specified and directed. | 5 | 10Running Metre | |
| 95 | 95 | Material and labour for contraction (dummy) joints 100 mm deep x 10mm wide filled with sealing compound, grade 'B' etc., all as specified and directed. | 10 | 10Running Metre | |
| 96 | 96 | Disconnecting of existing tank of capacity 500 ltr and setting aside or lowering if required for repairs cleaning etc and refixing in position hoisting and connecting , complete all as specified and as directed by Engineer -in-Charge. | 2 | Each | |
| 97 | 97 | Disconnecting of existing tank of capacity 1000 ltr and setting aside or lowering if required for repairs cleaning etc and refixing in position hoisting and connecting , complete all as specified and as directed by Engineer -in-Charge. | 1 | Each | |
| 98 | 98 | Supply and fix in repairs rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge | 1 | Each | |
| 99 | 99 | Supply and fix in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms, complete all as specified and directed by Engineer-in-Charge | 3 | Each | |
| 100 | 100 | Supply and fix in repair gun metal gate valves with iron wheel head, screwed both ends for iron pipes of dia 20 mm complete. | 1 | Each | |
| 101 | 101 | Supply and fix in repairs gun metal globe or gate valve, 20mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engineer-in-Charge | 1 | Each | |
| 102 | 102 | Taking up or down, and refixing of 25mm bore, GI tubing, medium grade,in new or old positions including cleaning for refixing complete all as specified and as directed by Engineer -in-Charge. | 5 | Running Metre | |
| 103 | 103 | Taking up or down, and refixing of 20mm bore, GI tubing, medium grade,in new or old positions including cleaning for refixing complete all as specified and as directed by Engineer -in-Charge. | 10 | Running Metre | |
| 104 | 104 | Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge. | 20 | Running Metre | |
| 105 | 105 | Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge. | 20 | Running Metre | |
| 106 | 106 | Supply and fix 15mm bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc complete all as specified and as directed by Engineer-in-Charge. | 20 | Running Metre | |
| 107 | 107 | Supply and fix 20mm bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc complete all as specified and as directed by Engineer-in-Charge. | 20 | Running Metre | |
| 108 | 108 | Supply and fix in repairs, 10 litre capacity, low level PVC flushing cistern, syphonic action type white colour, within let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engineer-in -charge | 6 | Each | |
| 109 | 109 | Supply and fix in repair internal kit with syphone for PVC flushing cistern 10liter capacity, complete all as specified and as directed by Engineer-in-Charge. | 10 | Each | |
| 110 | 110 | Supply and fix in repairs vitreous China squatting pan "Orissa Pattern "size 580 x 440mm white with integral foot rest, connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed by Engineer-in-Charge | 3 | Each | |
| 111 | 111 | Supply and fix in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated pillat tap, 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms), including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge. | 2 | Each | |
| 112 | 112 | Supply and fix in repairs vitreous China urinal, bowl type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, complete all as specified and as directed by Engineer-in-Charge. | 2 | Each | |
| 113 | 113 | Supply and fix in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge. | 3 | Each | |
| 114 | 114 | Supply and fix in repairs 15mm size PVC Connection with C P Brass Nuts of length 450mm, complete all as specified and as directed by Engineer-in-Charge. | 12 | Each | |
| 115 | 115 | Supply and fix in repair PVC waste pipe, 32mm dia, for WHB, complete all as specified and as directed by Engineer-in-Charge. | 25 | Each | |
| 116 | 116 | Supply and fix in repair PVC waste pipe, 32mm dia for urinal, complete all as specified and as directed by Engineer-in-Charge. | 25 | Each | |
| 117 | 117 | Supply and fix in repair PVC waste pipe, 40mm dia for sink, complete all as specified and as directed by Engineer-in-Charge. | 20 | Each | |
| 118 | 118 | Supply and fix in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick commercial ply wood backing including aluminium frame and fixed in wall with wooden plug with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer -in-Charge. | 5 | Each | |
| 119 | 119 | Supply and fix in repair 32mm brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connection including necessary packing union and cap complete all as specified and as directed by Engineer-in-Charge. | 3 | Each | |
| 120 | 120 | Supply and fix in repairs stainless steel gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge | 10 | Each | |
| 121 | 121 | Supply and fix in repairs Bib tap, cast copper alloy, 15mm dia with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed by Engineer-in-Charge. | 18 | Each | |
| 122 | 122 | Supply and fix in repair stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screw both ends for 15mm dia iron pipe or for union and fixed complete all as specified and as directed by Engineer -in-Charge. | 12 | Each | |
| 123 | 123 | Supply and fix in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge | 10 | Each | |
| 124 | 124 | Supply and fix in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed by Engineer-in-Charge. | 4 | Each | |
| 125 | 125 | Supply and fix in repairs brass chromium plated toilet paper holder recessed type, complete all as specified and as directed by Engineer-in-Charge. | 2 | Each | |
| 126 | 126 | Supply and fix in repairs 15mm bore stop valves fancy type chromium plated with long shank and cup, concealed type , complete all as specified and as directed by Engineer-in-Charge. | 5 | Each | |
| 127 | 127 | Supply and fix in repairs Bib tap, cast copper alloy chromium plated,15 mm dia with fancy type screwed down for iron pipes or brass ferule etc, complete all as specified and as directed by Engineer-in-Charge. | 8 | Each | |
| 128 | 128 | Supply and fix in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer -in-Charge. | 6 | Each | |
| 129 | 129 | Supply and fix in repairs Aluminium anodised tubular towel rail, 20 mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge. | 10 | Each | |
| 130 | 130 | Supply and fix in repairs PTMT towel rings fixed with and including plated brass screws and wooden/plastic cleats (minimum weight 90 gms) complete all as specified and as directed by Engineer-in-Charge. | 10 | Each | |
| 131 | 131 | Supply and fix in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed by Engineer-in-Charge. (Make : Jaquar cat No ALD-CHR-593) | 5 | Each | |
| 132 | 132 | Supply and fix in repairs stainless steel 1.0 mm thick plate rack of size 610x760x250 mm with all fittings as specified and directed | 15 | Each | |
| 133 | 133 | Dismantling of plain or corrugated steel sheeting of any gauge, thickness similar pattern roof covering, complete all as specified and as directed by Engineer - in - Charge. | 345 | Square Metre | |
| 134 | 134 | Material and labour for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws or L'or 'J' type look , complete all as specified and as directed by Engineer -in-Charge. | 185 | Square Metre | |
| 135 | 135 | Material and labour for prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in ridges, valleys hips etc fixed with self tapping screws or L'or 'J' type look , complete all as specified and as directed by Engineer -in-Charge. | 50 | Square Metre | |
| 136 | 136 | Supply and fix 0.63mm thick plain galvanised, mild steel sheeting, in ridges, hips, valley guttters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed by Engineer -in-Charge. | 110 | Square Metre | |
| 137 | 137 | Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge. | 170 | Square Metre | |
| 138 | 138 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 10mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge. | 70 | Square Metre | |
| 139 | 139 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm n.exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 10mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge. | 20 | Square Metre | |
| 140 | 140 | Material and labour for coloured glazed ceramic tiles 300 X 200 X 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including rendering 10mm thick in CM 1:3 on wall surfaces complete all as specified and as directed. | 20 | Square Metre | |
| 141 | 141 | Material and labour 18-20mm thick granite stone (of any type and coloured in single peice ) work (table rubbed and polished) in steps, jambs, pillars, window cills, flooring, cooking platform machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including griding and polishing types over & including screed bed 20mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge. | 10 | Square Metre | |
| 142 | 142 | Material & labour for designer coloured chequred cement concrete tiles of size 20cm x 20cm x 25mm with jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:6) all as specified and directed. | 40 | Square Metre | |
| 143 | 143 | Material and labour for chequered cement concrete tiles 300 X 200 X 25mm thick set, jointed and pointed in neat cement slurry in floors and pointing with grey cement and pigment to match the colour of tiles including rendering 20mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed. | 100 | Square Metre | |
| 144 | 144 | Material and labour for machine cut mirror polished kota stone for floor, 20-25mm thick over and including 20mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. | 50 | Square Metre | |
| 145 | 145 | Material and labour for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment including Sand filling including watering and consolidation complete all as specified and as directed. | 75 | Square Metre | |
| 146 | 146 | Dismantling of posts or struts (Wood, Steel or RCC) of any section including taking out embedded portion from natural ground and making good disturbed ground complete all as specified. | 250 | Running Metre | |
| 147 | 147 | Dismantling of fencing wire mesh any size and description (Chain link fencing) all as specified and directed. | 450 | Square Metre | |
| 148 | 148 | Dismantling barbed wire of any description all as specified and directed. | 15 | 100 Running Metre | |
| 149 | 149 | Excavation in post holes not exceeding 0.5 Cum and getting out, and removing surplus soil to a distance not exceeding 50 mtr in hard / dense soil incl returning filling in soil, spreading, levelling, watering and well ramming in layers n xec 25 cm all as specified and directed. | 80 | Each | |
| 150 | 150 | Material and labour for providing M30 (Design Mix) reinforced cement concrete (using 20 mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc, for fencing, average sectional area exc 100 Sqcm and n exc 250 Sqcm complete as specified and directed by Engineer-in-Charge | 4.4 | cubic metre | |
| 151 | 151 | Material and labour for PCC 1:4:8 type D2 (using 40mm graded aggregates) as in foundation, filling and mass concrete complete all as specified and directed. | 9.6 | cubic metre | |
| 152 | 152 | Supply only mild steel angles, bars, flats etc as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe-290 Gde E-165 All as specified and directed. | 300 | kilogram | |
| 153 | 153 | Supply only mild steel bolt with hexagonal or square head one end and screwed the other or screwed both ends each screwed is to be fitted with washers and one hexagonal or square nut exceeding 10cm long n.exc 15 cm long dia mtr of neck exc 11 to 15 mm complete all as specified and directed by Engineer-in-Charge. | 80 | kilogram | |
| 154 | 154 | Supply only PVC coated ( 1mm thick) chain link fencing exc 2 kilogram but n.exc 3.5 kilogram per sqm with size of mesh 50x50mm and thickness of wire n.exc 2.83mm , complete all as specified and directed by Engineer-in-Charge. | 1209.6 | kilogram | |
| 155 | 155 | Fixing only of PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete all as specified and as directed (Supply of MS line wire and flat iron, bolt & nuts measured & paid separately) | 400 | Square Metre | |
| 156 | 156 | Supply only 6mm dia wire, PVC coated for support/line wire to chain link fencing all as specified and as directed. | 80 | kilogram | |
| 157 | 157 | Material and labour for preparation new Steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified. | 8.16 | 10 Running Metre | |
| 158 | 158 | Supply and fix Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm specing and straining and fixing to any type of standard rail straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete. (Each line wire to be measured). | 14.4 | 100 Running Metre | |
| 159 | 159 | Supply and fix in repairs Steel rolling shutters, without ball bearing and thickness of laths 1mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type | 15 | Square Metre | |
| 160 | 160 | Material and labour for Hard Core 100mm thick (compacted thickness), with coarse aggregates of grading 3 (50 to 20 mm size), spread, rolled and consolidated to gradient and camber required | 7.5 | 10 Square Metre | |
| 161 | 161 | Material and labour for hardcore of gauge exceeding 63 but n.exc 100mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface. | 7.5 | cubic metre | |
| 162 | 162 | Dismantling of boarding, of any thickness any type and in any position with nails/ screws, complete all as specified and as directed by Engineer-in-Charge. | 120 | Square Metre | |
| 163 | 163 | Supply and fix second class hard wood weather boarding 20mm thick plained one side with butt joints as in eaves board complete all as specified and as directed by Engineer -in-Charge. | 70 | Square Metre | |
| 164 | 164 | Supply and fix in repairs Eco board 600 X 600 X 4mm thick decorative type fixed in aluminium frame work with screws or nails etc including two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer-in-Charge. | 100 | Square Metre | |
| 165 | 165 | Supply and fix in repairs aluminium anodised snap grid frame work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle for false ceiling and suspended with 6mm dia GI wire, hooked to roof with needful adjustement up to 1200mm long by means of ceiling cleats made out of GI Flat 40 X 3mm 60mm long and expansion holdfasteners 12.5mm dia 40mm long, including dismantling celing board of any description and refixing serviceable Eco board and replacing unserviceable Eco Board complete all as specified and as directed by Engineer -in-Charge.\nNote :- Unserviceable Eco Board obtained will be removed and new Eco board will be provided will be measured and paid seperately | 155 | Square Metre | |
| 166 | 166 | Sypply only Eco board all as specified and as directed. | 30 | Square Metre | |
| 167 | 167 | Material and labour in repairs FRP weather shade of FRP 4mm thick coloured designer chajja over window fixed with 35mm & tash fastener @200mm c/c including angle 40x40x5 mm brackets etc all as specified. | 40 | Square Metre | |
| 168 | 168 | Surface excavation n.exc 30 Cm deep and averaging 15 Cm deep and getting out Hard/ dense soil , etc complete all as specified and directed. | 50 | Square Metre | |
| 169 | 169 | Excavating over areas not exc 1.50m deep and getting out in hard/dense soil | 22.875 | cubic metre | |
| 170 | 170 | Removing excavated earth to a distance not exc 50m and depositing where directed | 22.875 | cubic metre | |
| 171 | 171 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes, foundation for poles etc., and getting out in hard/dense soil all as specified and as directed. | 41 | cubic metre | |
| 172 | 172 | Returning, filling in, including spreading, levelling, watering and well ramming in not exceeding 25 cm thick complete all as specified and as directed. | 19 | cubic metre | |
| 173 | 173 | Removing surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as directed. | 22 | cubic metre | |
| 174 | 174 | Material and labour for pulverised sand, spreading, levelling in layers not exc. 25cm thick, well ramming including watering for cable protection all as specified and as directed. Note : Punned thickness shall be measured and paid. | 16 | cubic metre | |
| 175 | 175 | Supply ang laying un-reinforced precast concrete cable cover class LV, type 1, flat, size 250mmx150mmx40mm all as directed and as specified | 1390 | Each | |
| 176 | 176 | Supply, Laying in trenches and connecting in replacement of existing LT underground cable of size 3.5 core x 50 Sqmm XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as directed. | 85 | Running Metre | |
| 177 | 177 | All as per Item Ser No 176 but of size 4 core x 10 Sqmm all as specified and as directed. | 100 | Running Metre | |
| 178 | 178 | All as per Item Ser No 176 but of size 2 core x 10 Sqmm all as specified and as directed. | 100 | Running Metre | |
| 179 | 179 | Supply, installation, testing and commissioning factory made indoor type powder coated compartmentalized cubicle LT Panel board, fabricated out of 2 mm thick CRCA sheet steel weather and vermin proof, suitable for operation on 415 volts, 50Hz, 3 Phase 4 wire AC supply complete with gland plates, lifting hooks, ventilating louvers, bus bars, inter connections, earthing, labeling , suitable for termination of cables including, supply and fixing of following switchgear and accessories in the panel. The panel should be mounted on angle iron stand of size 50x50x6mm with four legs 60cm above ground and embedded in PCC1:2:4 complete as specified conforming to relavant IS specification. The panel should be CPRI approved and having IP 54 ingress protection all as specified and as directed. | 1 | Each | |
| 180 | 179.1 | INCOMER :\n(a) MCCB 200A, 36 KA, 4 Pole, Adj thermal and Magnetic Setting - 1 Incomer\n(b) 1 No. Digital type VAF meter with selector switch along with CTs 200/5A\n(c) Phase indicating lamp -01 Set | |||
| 181 | 179.2 | BUS BARS: 400A TPN bus bars of aluminium alloy. | |||
| 182 | 179.3 | OUT GOING: \n(ii) MCCB 4P 100A, 25 KA, adj thermal & magnetic setting-2 Nos\n(ii) MCCB 4P,63A,25kA adj thermal and magnetic setting - 3 Nos\n(iii) Contactor TP 32 Amps & digital Timer switch for controlling street lights- 1 Set.\n(iii) MCB 4P,32A,10kA adj thermal setting - 1 Nos | |||
| 183 | 180 | Supply, installation, testing and commissioning factory made indoor type powder coated compartmentalized cubicle LT Panel board, fabricated out of 2 mm thick CRCA sheet steel weather and vermin proof, suitable for operation on 415 volts, 50Hz, 3 Phase 4 wire AC supply complete with gland plates, lifting hooks, ventilating louvers, bus bars, inter connections, earthing, labeling , suitable for termination of cables including, supply and fixing of following switchgear and accessories in the panel. The panel should be mounted on angle iron stand of size 50x50x6mm with four legs 60cm above ground and embedded in PCC1:2:4 complete as specified conforming to relavant IS specification. The panel should be CPRI approved and having IP 54 ingress protection all as specified and as directed. | 1 | Each | |
| 184 | 180.1 | INCOMER :\n(a) MCCB 400A, 36 KA, 4 Pole, Adj thermal and Magnetic Setting - 1 Incomer\n(b) 1 No. Digital type VAF meter along with selector switch along with CTs 400/5A\n(c) Phase indicating lamp -01 Set | |||
| 185 | 180.2 | BUS BARS: 600A TPN bus bars of aluminium alloy. | |||
| 186 | 180.3 | OUT GOING: \n (i) MCCB 4P, 160A, 25 KA, adj thermal and magnetic setting - 2 Nos\n(ii) MCCB 4P,63A, 25kA adj thermal and magnetic setting - 2 Nos\n(iii) MCB 4P,32A,10kA adj thermal setting - 2 Nos\n(iv)Contactor TP 32 Amps & digital Timer switch for controlling street lights- 1 Set. | |||
| 187 | 181 | Supply, installation, testing and commissioning factory made outdoor type powder coated compartmentalized cubicle LT Panel board, fabricated out of 3.15 mm thick CRCA sheet steel weather and vermin proof, suitable for operation on 415 volts, 50Hz, 3 Phase 4 wire AC supply complete with gland plates, lifting hooks, ventilating louvers, bus bars, inter connections, earthing, labeling , suitable for termination of cables including, supply and fixing of following switchgear and accessories in the panel. The panel should be mounted on angle iron stand of size 50x50x6mm with four legs 60cm above ground and embedded in PCC1:2:4 complete as specified conforming to relavant IS specification. The panel should be CPRI approved and having IP 54 ingress protection all as specified and as directed. | 1 | Each | |
| 188 | 181.1 | INCOMER :\n(a) MCCB 125A, 18 KA, 4 Pole, Adj thermal Setting - 1 Incomer\n(b) 1 No. Digital type VAF meter along with selector switch along with CTs 125/5A \n(c) Phase indicating lamp -01 Set | |||
| 189 | 181.2 | BUS BARS: 200A TPN bus bars of aluminium alloy. | |||
| 190 | 181.3 | OUT GOING: \n(i) MCCB 4P,63A, 18kA adj thermal and magnetic setting - 3 Nos\n(ii) MCB 4P,32A ,10 kA adj thermal setting - 3 Nos\n(iii)Contactor TP 32 Amps & digital Timer switch for controlling street lights- 1 Set. | |||
| 191 | 182 | Material and labour for Dismantling of existing perished Changeover boxes out door type including connected switch gears, cables, etc., and supply, install, testing and commisioning of CPRI approved Changeover box, weather/vermin proof made out of 3mm thick CRCA sheet duly powder coated of suitable size, floor mounted free standing type double door including 250 A capacity Changeover Switch & mounting box with PCC (1:3:6) type C1, bedding upto height of 30cm above ground level complete all as directed. | 1 | Each | |
| 192 | 183 | Material and labour for Dismantling of existing perished junction boxes of size 60x45x25 cm out door type including connected switch gears, cables, etc., and supply, install, testing and commisioning of CPRI approved loop in loop out junction boxes, weather/vermin proof made out of 3mm thick CRCA sheet duly powder coated of suitable size, floor mounted free standing type, 200 Amps capacity for phase & neutral current carrying capacity aluminium bus bar with heat shrinkable insulated sleeves with colour code and insulated support, mounting the junction box with PCC (1:3:6) type C1, bedding upto height of 30cm above ground level complete all as directed. | 1 | Each | |
| 193 | 184 | Material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised strip of 32x6 mm by means of nuts, bolts, checknuts, washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I of 2009 connected to and including earthing test point or disconnecting / testing link including excavation/ earth work in any strata, removal of surplus earth, GI pipe for watering and funnel, GI Pipe medium grade 40mm dia for earth lead protection, PCC 1:3:6 type C1 chamber with chamber cover in RCC 1:2:4 type B1. | 10 | Each | |
| 194 | 185 | Material and labour for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised wire of size 4 mm by means of nuts, bolts, checknuts, washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I of 2009 connected to and including earthing test point or disconnecting / testing link including excavation/ earth work in any strata, removal of surplus earth, 20mm GI pipe for watering and funnel, GI Pipe medium grade 15mm dia for earth lead protection, PCC 1:3:6 type C1 chamber with chamber cover in RCC 1:2:4 type B1. | 2 | Each | |
| 195 | 186 | Material and labour GI pipe light grade of size 40mm with all fittings complete laid in trenches all as in repairs as specified Make :- JINDAL / TATA / ZENITH | 12 | Running Metre | |
| 196 | 187 | Material and Labour for cutting existing hard standing/ road to a width not more than 30cm and depth not exceeding 60 cm for laying cable protection pipes on road crossings, making good the damaged portion with cement concrete type B-1 (1:2:4) with 20 mm graded aggregate upto 20 cm, finishing to a uniform smooth surface complete all as specified and directed. | 12 | Running Metre | |
| 197 | 188 | Material and labour Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multi-stranded copper conductor drawn through and including PVC conduit and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover/Pre moulded PVC switch board for housing the switches, socket outlets, fan regulators etc., for one light point controlled by one switch complete all as specified and as directed. | 10 | Point | |
| 198 | 189 | All as per Item No 29 but for one 3 pin socket outlet, 15 amps independent, with cable 4 Sqmm size and 4 Sqmm copper conductor cable and earth continuity conductor, complete all as specified and as directed | 3 | Point | |
| 199 | 190 | Taking down carefully copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc. and keeping in safe custody for taking credit including making good disturbed surfaces of walls, ceilings etc | 13 | Point | |
| 200 | 191 | Supply and fix switch piano flush button single pole one way 5 Amp all as specified and as directed. | 8 | Each | |
| 201 | 192 | Supply and fix in replacement Ceiling rose, 3 phase/PVC/polycarbonate, isolated body all as directed and as specified | 8 | Each | |
| 202 | 193 | Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush/box type, complete all as specified and as directed | 2 | Each | |
| 203 | 194 | Supply and fix in replacement switch socket outlet, multi purpose, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed | 3 | Each | |
| 204 | 195 | Material and labour for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC conduit and all accessories fixed to wall/ roofs/ floors etc with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories, complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of PVC conduit & one run of earth continuity conductor shall be measured as one running metre. | 20 | Running Metre | |
| 205 | 196 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. | 10 | Each | |
| 206 | 197 | Material and Labour for shifting transformer upto 400 kVA,11KV/433V after disconnecting HT/LT/Earthing connections, using crane from one location to other inside Brichgunj complete all as specified and as directed. | 2 | Jobs | |
| 207 | 198 | Material and labour for rewinding the exhaust fan motor with supper enamelled copper winding wire of same gauge and weight, varnishing, drying and insulating with new insulating materials complete all as required and directed for exhaust fan upto 450 mm sweep, single phase 230 volts AC including taking down and strip opening the exhaust fan motor, cutting/removing the old existing u/s burnt copper winding all as directed. | 6 | Each Job | |
| 208 | 199 | Material and labour for preparation for painting to existing Exhaust Fans of sweep upto 450mm after removing the greasy/oily deposits apply enamel paint of existing colour with one rough coat and one finish coat compete all as directed by the Engineer-in-Charge. | 10 | Each Job | |
| 209 | 200 | Dismantling of Cross arm, bracings, supports of MS Channel or angle sections etc., clamps etc., including bolts nuts etc., and taken as credit all as directed and as specified. | 1 | Quintal | |
| 210 | 201 | Dismantling of Insulators pin, post type and taken as credit all as directed and as specified. | 8 | Each | |
| 211 | 202 | Dismantling of ACSR conductors of any type/size and taken as credit all as directed and as specified. | 1 | Quintal | |
| 212 | 203 | Supply and fix in replacement 4 Way SPN Distribution Board double door, suitable for 240V, 50 Hz Ac including making good the disturbed surface all as directed and as specified. | 1 | Each | |
| 213 | 204 | Supply and fix in replacement MCB, SPN 6-32A, 230 V AC all as specified and directed | 1 | Each | |
| 214 | 205 | Supply and fix in replacement MCB SP, 6-32A, 230 V AC all as specified and as directed | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
