Value Based Annual Rate Contract For Maintenance Of Mechanical Equipment And Piping At Tdp ., MES DEPT ROOM NO 25 ADMIN-Maharashtra

Value Based Annual Rate Contract For Maintenance Of Mechanical Equipment And Piping At Tdp . , Overhauling Of Pumps , Pph-P2 , Pph-P2m , Pph-P3 , Pph-P3m , Pph-P4m , Diaphragm Pumps , Pvdf Pumps , Preservation Of Pumps , Pph-P2 , Pph-P2m , Pph-P3 , Pph-P3m , Pph-P4m , Diaphragm Pumps , Pvdf Pumps , Back Shroud/Casing Replacement , Pph-P2 , Pph-P2m , Pph-P3 , Pph-P3m , Pph-P4m , Pvdf Pumps , Seal Replacement , Pph-P2 , Pph-P2m , Pph-P3 , Pph-P3m , Pph-P4m , Pvdf Pumps , Impellers//Diaphragm Replacement , Pph-P2 , Pph-P2m , Pph-P3 , Pph-P3m , Pph-P4m , Pvdf Pumps , Diaphragm Pumps , Coupling /Spider Replacement , Alignment Of Motor And Pump , Overhauling Of Agitators , Gasket Replacement , Flange Size Upto And Including 2 Inch , Flange Size Above 2 Inch To And Including 4 Inch , Replacement Of Lubricanting Oil Of Pumps And Agitator , Man Hole Cover Opening Of Tank , Maintenance Of Ventilation System ( Set Of 9 Box Filters ) , Replacement Or Tightening Of V-BeltOf Compressor And Blowers ( Set Of 3 Belt ) , Maintenance Of Compressor Suction Filter , Maintenance Of Compressor Oil Filter , Compressor Air Dryer Filter Cleaning/Replacement , Valve Maintenance ( Metallic ) , Sizes 2 & 3 Nb ( Rs/No ) , Sizes 4 , 6 & Including 8 Nb ( Rs/No ) , Replacement Of Gland Packing Of Metalic Valve , Replacement Of Bearings Of Blowers , Replacement Of Non-Metallic Valve And Valve Handle , Sizes Up To & Including 2Nb , Sizes Above 2 & Including 4Nb , Sizes Above 4 & Including 8Nb , Replacement Of Valve Handel , Maintenance Of Air Operated Diaphargm Aodp , Rectification/Replacement Of Suction And Discharge Valves Of Compressor , Mechanical Seal Leak Rectification , Erection Of Equipment At , Ground Floor , 5 . 5 Mts Elevation , 11 Mts Elevation , Fabrication Of Non- Metallic Piping , Joining Of Hdpe Pipings , Sizes Up To & Including 1Nb , Sizes Above 1 & Including 2Nb , Sizes Above 2 & Including 4Nb , Joining Of Pph Pipings , Sizes Up To & Including 1Nb , Sizes Above 1 & Including 2Nb , Sizes Above 2 & Including 4Nb , Joining Of Cpvc Pipings , Sizes Up To & Including 1Nb , Sizes Above 1 & Including 2Nb , Sizes Above 2 & Including 4Nb , Welding Of Pp Plates , Erection Of Non Metallic Pipings ( Hdpe/Cpvc/Pp ) , Welding Of Cs/Ss Piping , Welding Of Cs Piping By Arc Welding , Welding Cs Piping By Tic Welding ( Rs Per Mm Thick Per Inch Dia Per Joint ) , Welding Of Ss 304L Piping By Arc Welding ( Rs Per Mm Thick Per Inch Dia Per Joint ) , Welding Ss 304L Piping By Tic Welding ( Rs Per Mm Thick Per Inch Dia Per Joint ) , Welding Of Ss 316L Piping By Arc Welding ( Rs Per Mm Thick Per Inch Dia Per Joint ) , Welding Ss 316L Piping By Tic Welding ( Rs Per Mm Thick Per Inch Dia Per Joint ) , Erection Of Cs/Ss Piping ( Per ) , Fabrication , Erection Of Ms Supports , Platform/Railing , Tubular Scaffolding As Per Standards With Partys Material As Per Job Requirement , Hydro Testing Of Piping Up To Including Upto 3 Inch Dia , Power Cleaning Of Ms Supports , Platform/Railing , Painting Of Ms Supports , Platform/Railing ( Rs/M3 )

Refer document

Refer document

Refer document

Name of Work :Value based Annual rate contract for Maintenance of mechanical equipment and piping at TDP.
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Overhauling of Pumps
2	1.1	PPH-P2		4	Nos
3	1.2	PPH-P2M		5	Nos
4	1.3	PPH-P3		7	Nos
5	1.4	PPH-P3M		8	Nos
6	1.5	PPH-P4M		5	Nos
7	1.6	Diaphragm pumps		8	Nos
8	1.7	PVDF Pumps		2	Nos
9	2	Preservation of Pumps
10	2.1	PPH-P2		7	Nos
11	2.2	PPH-P2M		12	Nos
12	2.3	PPH-P3		10	Nos
13	2.4	PPH-P3M		5	Nos
14	2.5	PPH-P4M		4	Nos
15	2.6	Diaphragm pumps		4	Nos
16	2.7	PVDF Pumps		6	Nos
17	3	Back Shroud/Casing Replacement
18	3.1	PPH-P2		5	Nos
19	3.2	PPH-P2M		6	Nos
20	3.3	PPH-P3		5	Nos
21	3.4	PPH-P3M		5	Nos
22	3.5	PPH-P4M		4	Nos
23	3.6	PVDF Pumps		1	Nos
24	4	Seal Replacement
25	4.1	PPH-P2		5	Nos
26	4.2	PPH-P2M		7	Nos
27	4.3	PPH-P3		6	Nos
28	4.4	PPH-P3M		4	Nos
29	4.5	PPH-P4M		2	Nos
30	4.6	PVDF Pumps		1	Nos
31	5	Impellers//Diaphragm Replacement
32	5.1	PPH-P2		3	Nos
33	5.2	PPH-P2M		4	Nos
34	5.3	PPH-P3		4	Nos
35	5.4	PPH-P3M		3	Nos
36	5.5	PPH-P4M		3	Nos
37	5.6	PVDF Pumps		1	Nos
38	5.7	Diaphragm pumps		10	Nos
39	6	Coupling /Spider replacement		20	Nos
40	7	Alignment of motor and Pump		20	Nos
41	8	Overhauling of Agitators		20	Nos
42	9	Gasket replacement
43	9.1	Flange size upto and including 2 inch		250	Nos
44	9.2	Flange size above 2 inch to and including 4 inch		150	Nos
45	10	Replacement of Lubricanting Oil of Pumps and Agitator		80	Nos
46	11	Man hole cover opening of Tank		20	Nos
47	12	Maintenance of ventilation system (set of 9 box filters)		6	Nos
48	13	Replacement or tightening of V-belt\nof compressor and blowers( set of 3 belt)		6	Nos
49	14	Maintenance of Compressor suction Filter		4	Nos
50	15	Maintenance of Compressor oil filter		4	Nos
51	16	Compressor air dryer filter cleaning/replacement		2	Nos
52	17	Valve Maintenance (Metallic)
53	17.1	Sizes 2" & 3" NB (Rs/No)		10	Nos
54	17.2	Sizes 4", 6" & including 8" NB (Rs/No)		10	Nos
55	18	Replacement of gland packing of metalic valve		10	Nos
56	19	Replacement of bearings of Blowers		6	Nos
57	20	Replacement of Non-metallic valve and valve handle
58	20.1	Sizes up to & including 2"NB		10	Nos
59	20.2	Sizes above 2" & including 4"NB		30	Nos
60	20.3	Sizes above 4" & including 8"NB		15	Nos
61	20.4	Replacement of Valve handel		30	Nos
62	21	Maintenance of Air Operated Diaphargm AODP		6	Nos
63	22	Rectification/Replacement of suction and discharge valves of compressor		10	Nos
64	23	Mechanical seal leak rectification		20	Nos
65	24	Erection of equipment at
66	24.1	Ground floor		5	MT
67	24.2	5.5 Mts elevation		4	MT
68	24.3	11 Mts elevation		3	MT
69	25	Fabrication of Non- metallic piping
70	25.1	Joining of HDPE Pipings
71	25.11	Sizes up to & including 1"NB		50	Nos
72	25.12	Sizes above 1" & including 2"NB		100	Nos
73	25.13	Sizes above 2" & including 4"NB		50	Nos
74	25.2	Joining of PPH Pipings
75	25.21	Sizes up to & including 1"NB		20	Nos
76	25.22	Sizes above 1" & including 2"NB		50	Nos
77	25.23	Sizes above 2" & including 4"NB		30	Nos
78	25.3	Joining of CPVC Pipings
79	25.31	Sizes up to & including 1"NB		20	Nos
80	25.32	Sizes above 1" & including 2"NB		40	Nos
81	25.33	Sizes above 2" & including 4"NB		20	Nos
82	26	Welding of PP plates		800	mm thickness per meter
83	27	Erection of Non Metallic Pipings (HDPE/CPVC/PP)		500	inch dia per meter
84	28	Welding of CS/SS Piping
85	28.1	Welding of CS Piping by Arc welding		200	mm thick per inch dia per joint
86	28.2	Welding CS Piping by TIC welding (Rs per mm thick per inch dia per joint)		50	mm thick per inch dia per joint
87	28.3	Welding of SS 304L Piping by Arc welding (Rs per mm thick per inch dia per joint)		50	mm thick per inch dia per joint
88	28.4	Welding SS 304L Piping by TIC welding (Rs per mm thick per inch dia per joint)		50	mm thick per inch dia per joint
89	28.5	Welding of SS 316L Piping by Arc welding (Rs per mm thick per inch dia per joint)		50	mm thick per inch dia per joint
90	28.6	Welding SS 316L Piping by TIC welding (Rs per mm thick per inch dia per joint)		50	mm thick per inch dia per joint
91	29	Erection of CS/SS Piping (Per )		200	inch dia per meter length
92	30	Fabrication, erection of MS Supports, platform/railing		3	MT
93	31	Tubular scaffolding as per standards with party's material as per job requirement		4000	M3
94	32	Hydro testing of piping up to including upto 3" inch dia		1000	inch dia per meter length
95	33	Power Cleaning of MS Supports, platform/railing		6000	M3
96	34	Painting of MS Supports, platform/railing (Rs/m3)		6000	M3