Rural Development Department has published Construction Of Vetarnary L.D.O. Quarter At Newasa Tal.Newasa And Other Four Works Dist. Ahmednagar . Submission Date for this Tender is 22-06-2021. Building Work Tenders in AHMEDNAGAR Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Item No. 1 :-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Bd.A.1 Page No. 259 |
| 2 | Item No. 2 :-Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) Bd.A.2 Page No. 259 |
| 3 | Item No. 3 :- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. Bd.A. 12 Page No. 264 |
| 4 | Item No. 4 :-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand Bd. E. 1 Page No. 287 |
| 5 | Item No. 5 :- Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.3 Page No. 298 and B.7, Page No.38 |
| 6 | Item No.6 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.5 Page No. 300 and B.7, Page.No. 38 |
| 7 | Item No.7 :-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.6 Page No. 300 and B.7, Page No.38 |
| 8 | Item No. 8 :-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Bd.G. 1 Page No. 313 |
| 9 | Item No. 9 :- Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete. Bd.A.11 Page No. 263 |
| 10 | Item No. 10 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Bd.G.5 Page No. 315 |
| 11 | Item No. 11 :-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. |
| 12 | Item No. 12 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.8 Page No. 302 and B.7, Page No.38 |
| 13 | Item No. 13 :- Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface |
| 14 | Item No. 14 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306 |
| 15 | Item no.15:Providing and laying telephone black / Amba White / Cadburybrown / RBI red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Specifications: Bd. M. 12 Spec. No.: As directed by Engineer-In- Charge |
| 16 | Item No. 16 :- Providingandfixingsolidcoreflushdoorshuttercommercial in single leaf 30 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel Hinges and cromium plated fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.Spec. No.: Bd-T-36, Page No. 500 |
| 17 | Item No. 17 :- Providing and fixing steel frame door of angle 50 x 50 x 6 mm with mild steel bars 16 mm dia. horizontally at 10mm c/c for ventilator portion including iron hold fast boxes for fixing shutters including welding, finishing, painting etc. complete. |
| 18 | Item No. 18 :-Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC "C" channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the " c " channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide |
| 19 | Item No. 19 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.As directed by Engineer in charge. |
| 20 | Item No. 20 :-Providing andfixing in position(as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre.Theshuttershouldbeofbearingbottom40x18x1.25mmat weight 0.417Kilogram/Running metre.Inter locking section 40x 18x 1.10mm atweight 0.469Kilogram/Runningmetre.andhandleandtopsection40x18x1.25mm atweight o.417Kilogram/Runningmetre.Asperdetaileddrawingsandasdirectedby Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mmthickplainglassandaluminiummosquitonetshutterwithstainlesssteeljailwithall required screws and nuts etc, complete. With colour Anodising with box |
| 21 | Item No. 21 :Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.Bd.U.1 Page No. 537 |
| 22 | Item No. 22 :Providing and fixing mild steel grill railing weighing 20Kilogram/ Square Metre. with PVC handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete. Spec. Number : As directed by Engineer in charge. |
| 23 | Item No. 23 :- Providingsillsofrequiredmaterial20mmto25mmthick,onabedofcementmortar1:4 includingcementfloat,fillingjointswithneatcementslurry,curing, mouldingedges, polishing,cleaning complete.b) Granite |
| 24 | Item No. 24 :-Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.Cmembersandbrickwork,ofapprovedqualityincludingfixing meshinpositionby necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. |
| 25 | Item No. 25 :- Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Bd.L.1 Page No. 367 |
| 26 | Item No. 26 :-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page No. 368 |
| 27 | Item No. 27 :Providing fine cementfinish1.5 mm thick overgreen plastersurface including scaffolding curing etc. complete. |
| 28 | Item No. 28 :Providing and applying Two coat soft wall care Putty on plastered surface and Ceilingand Walls to prepare surface even and smooth of approved make, etc complete. |
| 29 | Item No. 29:-Providingsandfacedplasterexternallyincement mortarusingapprovedscreenedsand,inallpositions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1kg percement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.Spec. No.: Bd.L.7 Page No. 369 |
| 30 | Item No. 30 :- Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) Flooring |
| 31 | Item No. 31 :- Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 32 | Item No. 32 :-Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.Bd.M.12 Page No. 385. |
| 33 | Item No. 33:-Providing and layingceramic tiles of having size 30 cm x 30. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc.complete.Bd.M.13 Page No. 386. |
| 34 | Item No. 34:- Providing and constructing Granite kitchen platform with fixing ofstainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappahtop 35 to 40 mm thick and polished Granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical Kaddapa supports 15 cm height and top kaddapa of 75 x 40 cm including cutting, opening for sink of required size in kadappah etc. complete Spec. No. : As directed by Engineer in charge.D.S.R.07-08 P/It 210/21 |
| 35 | Item No. 35 :- Providingand applyingtwocoatsof exterioracraylicemulsion paintconfirmingto corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces includingcleaning,preparingtheplastersurface,applyingprimercoat,scaffoldingif necessary , and watering the surface for two days etc complete. |
| 36 | Item No. 36:- Providing and applying two coats of exteriorweather shield paint of approved manufacture andofapprovedcolourtotheplasteredsurfacesincludingcleaning,preparingtheplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etccomplete.NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary |
| 37 | Item No. 37:- Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. |
| 38 | Item No. 38:- ProvidingandfixingwhiteglazedearthenwareWashHandBasinof55cm.x40cm.size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 39 | Item No. 39:-Providing and fixing 10 cm PVC nahani trap with grating etc. complete |
| 40 | Item No. 40 :- ProvidingandfixingP.V.C.Rainwaterpipesof110mmouterdiameterandhavingwall thicknessof2.2to2.7mmconfirmingtoI.S.13592-1992includingproperrainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket withsolventcementandproperlyrestingtheshoeofpipesonC.C.ormasonryblocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 41 | Item No. 41 :-ProvidingandfixingP.V.C.Rainwaterpipesof160mmouterdiameterandhavingwall thicknessof2.2to2.7mmconfirmingtoI.S.13592-1992includingproperrainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket withsolventcementandproperlyrestingtheshoeofpipesonC.C.ormasonryblocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 42 | Item No. 42 :- -Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. |
| 43 | Item No. 43:- Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. |
| 44 | Item No. 44:-Providingsoakpitofsize 120cm x120cm x120cmincluding excavatingandfilling with brick-bats. |
| 45 | Item No. 45:Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 46 | Item No. 46:-Providing andfixing onwalls/ceiling/floor 20mm dia.CPVC pipe withnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 47 | Item No. 47:-Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 48 | Item No. 48:- Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 49 | Item No. 49 :- Providingandfixing75mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete |
| 50 | Item No. 50 :- Providingandfixing100mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. |
| 51 | Item No. 51:- Providing & fixinghalf turn 25mm dia. Gun metal flushing cock including all accessories etc.completeSpec. No. As directed by Engineer in charge.P/It 167/31 ( Rate Analysis ) |
| 52 | Item No. 52 :- Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. Additional Item. Spec. No. As directed by Engineer in charge.( Rate analysis ) |
| 53 | Item No. 53 :- Providing, hoisting and fixing in position sintex or equivalent high density polyethylene UV stabilized confirming to IS –12701 ;water storage tank with necessary connection ,testing etc. complete. Specification No. As directed by Engineer in charge P/It. 177/80 ( Rate analysis ) |
| 54 | Item No. 54 :- Providing and fixing 25 mm screw down wheeled stop tap of brass including necessary sockets / union nut, testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.) Spec. No. : Bd.V.9 Page No. 555 P/It.162/15ii ( Rate analysis ) |
| 55 | Item No. 55:-Providing and fixing heavy duty inter locking concrete RUBBERMOULD GLOSSY PAVING BLOCKS of 80 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using100% crushed sand Bd. M-12 page No. 385 |
| 56 | Item No. 56 :-Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. |
| 57 | Item No.57:-Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete |
| 58 | Item No.58:ProvidingandfixingC.P.TwowayBIBcockofapprovedmakecontinental including necessary sockets/union nut etc. complete. |
| 59 | Item No.59:Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bendpipeandwallflangeofapprovedmakeincludingnecessarysockets/unionnutetc. complete. |
| 60 | Item No.60:ProvidingandfixingC.P.pillarcocklongneckwithaeratorofapproedmakeincluding necessary sockets/union nut etc. complete. |
| 61 | Item No.61:Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete." |
| 62 | Item No 62 Testing charges for M20 Cocncrete cube compressive strength(Set of 3 cubes)…. |
| 63 | Item No.63:-Testing charges for sand silt content…. |
| 64 | Item No.64:-Testing charges for bricks water absorption(set of 5 Brick) , compressive Strenth (set of 5 Brick),Efflorescence (set of5 Brick)…. |
| 65 | Item No.65:-Testing charges Steel Bar Upto 16mm (Set of 3 Bars) |
| 66 | Item No.66:-Testing charges Mix design….(with all tests On Basic materials |
| 67 | Item No. 67:-Providing and fixing board displaying information, such as "Name of work, Tender cost, Name of Contractor, Work completion and liability period etc", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 68 | Item No. 68 :- Royalty charges as per statement-Sand |
| 69 | Item No. 69 :- Royalty charges as per statement-Other |
| 70 | Item No.1-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) |
| 71 | Item No.2-Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) |
| 72 | Item No.3-Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) |
| 73 | Item No.4-Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 74 | Item No.5- Providing preconstructional antitermite treatment as per I.S. 6,313 (Part-II) by treating the bottom surface and sides of excavation clorophyriphoas/lendene at the rate of 5 litres of emulsion concentrates of 0.5 percent of Aldrin per square Metre of surface area covering 10 years guarantee. Spec. No.: As directed by Engineer in charge. |
| 75 | Item No.6-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand |
| 76 | Item No.7-Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 77 | Item No.8-Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 78 | Item No.9-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 79 | Item No.10-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 80 | Item No.11-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 81 | Item No.12-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 82 | Item No.13-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 83 | Item No.14-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 84 | Item No.15-Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 85 | Item No.16-Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete. |
| 86 | Item No.17-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 87 | Item No.18-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. |
| 88 | Item No.19-Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. |
| 89 | Item No.20-Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. |
| 90 | Item No.21:-Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. |
| 91 | Item No.22-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 …….. finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. A) Internal cement plaster 12mm thk with neeru finish |
| 92 | Item No.23-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 …….. finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.B) Internal cement plaster 12mm thk withOut neeru finish |
| 93 | Item No.24-Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curingetc.complete. |
| 94 | Item No.25-Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. |
| 95 | Item No.26--Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curingetc.complete. |
| 96 | Item No.27-Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 97 | Item No.28-Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick andrequired widthwideinplain/diamondpatternonabedof1:6C.M.includingcementfloat,filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 98 | Item No.29-Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete. |
| 99 | Item No.30-Providing Half-round Moulding ( Full Moulding ) to 18 mm to 20 mm thick granite stone including fine polishing and cleaningetc. complete |
| 100 | Item No.31-Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 101 | Item No.32-Providing and fixing factory made panelled door shutter in single leaf 35 mm thick style and rail without ventilator with CCTW panels 12 mm thick including wrought iron hold fast and stainless steel fixtures with oil painting 3 coats etc. complete. |
| 102 | Item No.33-Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). |
| 103 | Item No.34-Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box |
| 104 | Item No.35-Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 105 | Item No.36-Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 106 | Item No.37-Providing and fixing mild steel grill railing 20 kg/sq.m withteak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. |
| 107 | Item No.38-Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaningetc. complete. |
| 108 | Item No.39-Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 109 | Item No.40-Providing and laying ceramic tileshaving size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 110 | Item No.: 41 :Providing and constructing granite Kitchen platform with fixing of stainless steel sink 600 mm x 510 x 200 mm size as per detailed drawingincluding vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top and polished granite 18 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15cm heigh and top granite of 75 x 40 cm including cutting opening forsink of required size in kadappah as well as granite etc. complete.complete.As directed by Engineer incharge. R.A. attached |
| 111 | Item No.: 42 : Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete. |
| 112 | Item No.43-Providing and applyingputty tonew plastered surfaces in two coats to receiveapproved paint in all positions including all materials,labourscaffolding and curing etc. complete. |
| 113 | Item No.44-Providingand applyingtwocoatsof exterioracraylicemulsion paintconfirmingto corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces includingcleaning,preparingtheplastersurface,applyingprimercoat,scaffoldingif necessary , and watering the surface for two days etc complete. |
| 114 | Item No.45-Providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. |
| 115 | Item No.46-Providing and fixing on walls/ ceiling/ floor ... mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.A) 15mm dia. CPVC Pipe |
| 116 | Item No.47-Providing and fixing on walls/ ceiling/ floor ... mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.A) 20mm dia. CPVC Pipe |
| 117 | Item No.48-Providing and fixing on walls/ ceiling/ floor ... mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.A) 25mm dia. CPVC Pipe |
| 118 | Item No.49-Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. A)15 mm dia. stop tap |
| 119 | Item No.50-Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.A)20 mm dia. stop tap |
| 120 | Item No.51-Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.A)25 mm dia. stop tap |
| 121 | Item No.52-Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 122 | Item No.53-Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. |
| 123 | Item No.54-Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. |
| 124 | Item No.55-Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 125 | Item No.56-Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 126 | Item No.57-Providing , laying and fixing ,jointing Supreme Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. |
| 127 | Item No.58-Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. |
| 128 | Item No.59-Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 129 | Item No.60-Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. |
| 130 | Item No.61-Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. |
| 131 | Item No.62-Providing and fixing ... mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. completeA) 75mm PVC pipe |
| 132 | Item No.63-Providing and fixing ... mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. completeB) 100mm PVC pipe |
| 133 | Item No.64-Providing and fixing board displaying information, such as "Name of work, Tender cost, Name of Contractor, Work completion and liability period etc", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 134 | Item No.65-Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaningetc. complete. (using 100% crushed sand) |
| 135 | Item No.66-Material Testing Concrete= A) Concrete Cube Cmpresive strength |
| 136 | Cement = B) Finess Consistancy/seating Time, Compressive strength,Specific gravity |
| 137 | Steel =C)Yeild stress,Ultimate tensile stress,Elongation Wt.per running meter |
| 138 | D)Steel =Above 16 mm |
| 139 | E)Sand= Finess Modulus,Silt Content |
| 140 | Brick =Crushing Value(Set of 5 brick) water absorption(set of 5 brick) Efforesences(Set of 5 Bricks) |
| 141 | G )Ceramic/Vetrified Tiles/ Pavings Blocks= Fluxtural Strength,Water absoption,Resistant to water |
| 142 | Item No. 67 :- Royalty charges as per statement-Sand |
| 143 | Item No. 68 :- Royalty charges as per statement-Other |
| 144 | Item no.1 : -Excavation for foundation in earth, soil of all types sand, gravel and soft murum, removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering preparing the bed for foundation and necessary back filling, ramming, watering (including shoring and strutting) complete. (Bd.A.1 page no.259) |
| 145 | Item no.2 : - Providing dry trap stone solling 15 cm to 20 cm thick including hand packing and compacting compete. (Bd.A.12/P.264) |
| 146 | Item no.3 :-Providing and laying in situ, cement concreteM10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water manually, form work, compacting and curing. (Spec.No.Bd.E.1/P.287) |
| 147 | Item no.4 :-Providing and laying in situ, cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, grillage, stripes, foundations and footings of R.C.C. columns and steel stanchions including bailing out water manually, form work, compacting, curing and roughening them if special finish is to be provided.(Excluding reinforcement,and structural steel)(Spec.No.Bd.F.2/P.298/IS456:200) |
| 148 | Item no.5 :-Providing and laying in situ, cement concrete M-20of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed drawing and designs, or as directed including, centeringformwork , compaction finishing the formed surface with cm 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing. etc. comp (Excluding reinforcement ) The c.m.1:3 plaster is considered for rendering uneven and honeycombed surface only.Wooden planks/shuttering will not be allowed.(Spec.No.Bd.F.5/P.300/ IS456:200) |
| 149 | Item no.6 :-Providing and laying in situ, cement concrete M-20 M-20of trap/granite/quartzite/gneiss metal for R.C.C. beam and lintels as per detailed drawing and designs, or as directed including, centeringform work, compaction finishing the formed surface with cm 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing.(Excluding reinforcement.The c.m.1:3 plaster is considered for rendering uneven and honeycombed surface only.Wooden planks/shuttering will not be allowed.) (Spec.No.Bd.F 6/P.300 IS456:200) |
| 150 | Item no.7:-Providing and fixing in position TMT steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed designs, drawing and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (From integrated plant) (Spec.No.Bd.F.17/Page No.306) |
| 151 | Item no. 8 :-Providing second class burnt brick masonry with conventional/ I.S. type bricks in C.M. 1:6 in Superstructureincluding striking joints on unexposed faces, racking out joints on exposed faces and watering and scaffolding complete.(Spec.No.Bd.G.5/Page No.315) |
| 152 | Item No.9 :-Providing and fixing mild steel grill gate with angle iron frame 65mm x65mm x 10mm with iron bars at 150mm C/C and diagonal flats as perthe detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 50 Kg/Smt |
| 153 | Item no.10 :-Providing and casting in situ cement concrete M15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if specialinish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) |
| 154 | Item no.11 :-Providing internal cement plaster 12 mm. thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surface, in all position including scaffolding and curing complete.(Spec.No.Bd.L 2/ Page No.368 )(Spec.No.Bd.L 10/ Page No.370) |
| 155 | Item no.12 :- Providing internal cement plaster 20mm thick in two coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. |
| 156 | Item no.13 :-Providing and applying two coats of water proof cement paint of approved manufactre and approved colour to the plastered surface incl. preparing the surface,scaffolding if necessary, watering for two days complete. (Spec.No.Bd.O.8/Page No.406) |
| 157 | Item No.14 :- Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. |
| 158 | Item no.15 : -Providing and fixing board displaying information, such as "Name of work, Tender cost, Name of Contractor, Work completion and liability period etc", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 159 | Item No.16 :- Testing charges of Material.A) CC M10/ CC M20 Cube Compressive strength test, |
| 160 | B) Bricks for Superstructure Water absorption test, Compressive strength test, Efflorenscence Test |
| 161 | Item No.17 :- Royalty Chages for Sand |
| 162 | Item No.17 :- Royalty Chages for Other materials |
| 163 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 Metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m)Spec. No.: Bd.A.1 Page No. 259 |
| 164 | Excavationforfoundationinhardmurumincluding removing the excavated materials upto distance of 50metresbeyondthebuildingareaandstackingand spreadingasdirected,dewatering,preparingthebed for the foundation and necessary back filling, ramming, wateringincludingshoringandstruttingetc.complete. (Lift upto 1.50 m) By Manual Means Spec. No.: Bd.A.2 Page No. 259 |
| 165 | Providing and laying in situ, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation andbeddingincluding bailing out water, formwork, compacting and curing complete, with Concretemixer, Spec. No.: Bd. E. 1 Page No. 287 |
| 166 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete. Spec. No.: Bd.A. 12 Page No. 264 |
| 167 | Filling in plinth and floors with contractors soil sand or murum in 15 cm to 20cm, layers including watering and compaction complete.Spec. No.: Bd.A.11 Page No. 26 |
| 168 | Providing and casting in situ cement concrete M-15 of trap / granite / quartzite / gneiss metal for Foundation including centering, formwork, compacting, roughening them if special finish is to be provided and curing and finishing if required complete,with Concrete mixer. . Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No 38 |
| 169 | Providing and laying in situ cement concreteM-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, with Concrete concrete mixer. With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38 A) M-20 |
| 170 | Providing and casting in situ cement concrete M20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with Concrete concrete mixer. With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38 |
| 171 | Providing & casting in situ cement concrete M------ of trap / granite /quartzite/ gneissmetal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork,cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). withConcrete concretemixer With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38 |
| 172 | Providing and casting in situ cement concrete M---- of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingscanopy, waist slab with steps as per detailed designs and drawings including centering, formwork,cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).withConcrete concretemixer With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38 |
| 173 | Providing and casting in situ cement concrete in M---- of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork,cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement). with Concrete mixerWith natural sand. Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38 |
| 174 | Providing & casting in situ cement concrete M20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with Concrete concrete mixer With natural sand. Spec. No.: Bd.F.9 Page No. 303 and B.7, Page No.38 |
| 175 | Providing and fixing fan hook box of 2 mm thick M.S. sheet rectangular size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface. Spec. No.: As directed by Engineer in charge |
| 176 | Providing and fixing in position TMT FE-500 bar reinforcement of various diaMetres for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. Spec. No.: BdF-17 Page No. 306. B) TMT steel from other plant. |
| 177 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in ---------- of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313 A) foundations and plinth |
| 178 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in ---------- of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313 C) Superstructure |
| 179 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diaMetre / 2 hoop iron strips 25 mm X 1.6 mm at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering Complete. Spec. No.: Bd.G.7 Page No. 316 |
| 180 | Providing and laying telephone black / Amba White / Cadburybrown / RBI red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Specifications: Bd. M. 12 Spec. No.: As directed by Engineer-In- Charge |
| 181 | Providing and fixing solid core flush door shutter in single leaf 30 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Spec. No.: Bd-T-34, Page No. 499 |
| 182 | Providing and fixing 30 mm thick factory made PVC rigid foam paneled door shutters by approved manufacturer and brand by from MS tube of 19 gauge thickness size 19 mm x 19mm for styles and 15 mm x 15 mm for top and bottom rails, covered with heat moulded PVC C channel of 5 mm thick and 75 mm wide PVC sheet for top rail, lock rail and bottom rail on either side and 5 mm thick, 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5 mm thick PVC sheet fitted in the M.S frame welded/sealed to the styles and rails with 5mm x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc. complete as per manufacturers specification and direction of Engineer in charge fixed to the frames with stainless steel hinges of 125 mm size, and cromium plated fixtures including all material, labour, machinery etc. complete ( for WC, bath shutter) ( The item is exclusive of door frame) Spec. No.: As directed by Engineer in charge. |
| 183 | Providing and fixing in position (as per 1,868 / 1,982)Aluminium sliding window of three tracks with rectangular pipe 63 x 38.10 x 1.22 mm. at weight 0.650 kg/Rmt. with window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.20 mm at weight 0.417 kg/Rmt.. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.25 mm at weight 0.469 kg/Rmt. And handle section 52 x 18 x 1.13 mm at weight 0.488 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box. Spec. No.: IS: 1,948-2,006 and as directed by Engineer-in-charge. |
| 184 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No.: As directed by Engineer in charge. |
| 185 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg./sq.m. as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. Spec. No.: Bd.U.1 Page No. 53 |
| 186 | Providing and fixing chicken mesh jali (24 gauge) at the junction of 2 different surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc. complete. Spec. No.: As directed by Engineer in Charge: |
| 187 | Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 188 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing complete. Spec. No.: Bd.L.2 Page No. 368 |
| 189 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec. No.: Bd.L.7 Page No. 369 |
| 190 | Providing and laying Rectified GlazedCeramic tiles of Somany/RAK/ Kajaria/ Nitco/ Asian or equivalent make of First quality (IS 15622) having size 30 cm x 30 cm of first quality of approved colour for flooring in required positionlaidonabedof1:4cementmortarincluding cement float, filling joint with white/colour cement slurry cleaning curing complete. Spec. No.: Bd.M.12 Page No. 385. |
| 191 | Providing and laying Rectified Glazed Ceramic tiles ofSomany/RAK/Kajaria/Nitco/Asianorequivalent make havingsize30cm.x30cm. offirstqualityof approved colour for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:3 cement mortar including joint filling with white/ colour cement slurry cleaning curing complete. Spec. No.: Bd.M.13 Page No. 386. |
| 192 | Providing and laying Mat finish Vitrified tiles of having size 590 mm to 590 to 605 mm x 590 to 605 mm (thickness to be specified by the manufacturer) and confirming IS. 15622-2006 of approved make, shade and pattern for skirting in required position with 1:3 cement mortar bedding including neat cement float, filling joints, curing and cleaning etc. complete. Spec. No.: Bd.M.12 Page No. 385 |
| 193 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Spec. No.: Bd. M.22 B/Page No. 390 |
| 194 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing complete. Specifications: Bd. M. 12 Spec. No.: Bd. M-12 |
| 195 | Providing and fixing Orissa type white glazed earthenware 580 x 440 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. Spec. No.: As directed by Engineer in charge. |
| 196 | Providing and fixing 10 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete. Spec. No.: As directed by Engineer in charge. |
| 197 | Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Spec. No.: Bd.V.30 Page No. 565 |
| 198 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No.: Bd.V.38, Page No. 572 |
| 199 | Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. lid cover 65 kg with frame fixed in cement concrete etc. complete. Spec. No.: Bd.V.43, Page No. 574 |
| 200 | Providing and fixing 110mm diaMetre UPVC soil / vent / waste SWR pipe of required diaMetre conforming to IS-13592:1992, and IS-4985:2000 to withstand continuous internal hydraulic pressure of 4 kg / cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary Excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 201 | Providing and fixing 75mm diaMetre UPVC soil / vent / waste SWR pipe of required diaMetre conforming to IS-13592:1992, and IS-4985:2000 to withstand continuous internal hydraulic pressure of 4 kg / cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary Excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 202 | Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting I/C fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. Concealed work, including chases and making good the wall etc. 15 mm nominal outer dia pipes. Spec. No.: As directed by Engineer in charge |
| 203 | Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting I/C fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. Concealed work, including chases and making good the wall etc. 25 mm nominal outer dia pipes. Spec. No.: As directed by Engineer in charge |
| 204 | Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.: Bd.V.9 Page No. 555 |
| 205 | Providing and fixing C.P. wall mixer with overhead shower with 115mm long bend pipe & wall flange jaquar make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. Spec. No.: As directed by Engineer in charge Note: To be executed only with prior permission of SE |
| 206 | Providing and fixing C.P. BIB cock with wall flange jaquar make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete Spec. No.: As directed by Engineer in charge Note: To be executed only with prior permission of SE/CE |
| 207 | Providing and fixing C.P. sink cock with raised J shaped swinging casted spout jaquar make continental (CAT.NO. CON -359) including necessary sockets/ union nut etc. complete. Spec. No.: As directed by Engineer in charge Note: To be executed only with prior permission of SE/CE |
| 208 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm of Nirali or equivalent make incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Spec. No.: As directed by Engineer in charge |
| 209 | Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diaMetre and 1.5mm thick at top,40mm diaMetre and 1.5mm thick vertical supports spaced at regular interval and three pipes of 15mm diaMetre fixed horizontally including fabricating ,fixtures, errecting , necessary welding , griding , finishing, buffing to stainless steel pipe etc. complete. Spec. No.: As directed by Engineer Incharge |
| 210 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete Spec. No.: As directed by Engineer in charge. |
| 211 | Providing and fixing chromium plated towal rod 16 mm dia and 75 cm. in length including all accessories complete. Spec. No.: As directed by Engineer in charge. |
| 212 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required. Spec. No.: As directed by Engineer in charge. |
| 213 | Providing and applying pearl/ luster finish paint of approved colour and shade to the existing surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. Spec. No.: As directed by Engineer in charge |
| 214 | Providing and applying two coats of Appex Ace white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days complete Spec. No.: As directed by Engineer in charge |
| 215 | Providingandapplyingwaterproofingtreatmentusingacrylicpolymermodifiedcement basedwaterproofingcoatingwithfibreglassmeshmixingattherateofpowdertoliquid (2:1)byweightcovering9to10SquareMetre/Kilogramwithtwocoatusingapproved chemicals for masonry andconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. |
| 216 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. Spec. No.: Bd.V.46, Page No. 576 |
| 217 | Providing and preparing kitchen otta made up from 30 mm thick and 75 cm. wide one side polished kadppa top 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. ( Mode of measurement is Plan of Otta ) Spec. No.: Bd.M.35C / Page No. 393 |
| 218 | Providing and fixing H.D.P container Sintex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres Spec. No.: As directed by engineer-in-charge. |
| 219 | Providingandfixingboarddisplayinginformation,suchas"Nameofwork,Tendercost, Name of Contractor, Work completion and liability period etc", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x75cmincluding,excavation,refilling,transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge |
| 220 | Testing Charges of CC M20 Cube |
| 221 | Testing Charges of Bricks |
| 222 | Testing Charges of Sand |
| 223 | Royalty Charges for Sand |
| 224 | Royalty Charges for other than Sand |
| 225 | Item No.1:-Excavation for foundation in earth soil of all types sand gravel and soft murum, including removing the excavated material unto a distance of 50 Mtr beyond the building area and stacking and spreading as directed, de watering preparing the bed |
| 226 | Item No.2:-Excavation for foundation in earth soil of all types sand gravel and soft murum, including removing the excavated material unto a distance of 50 Mtr beyond the building area and stacking and spreading as directed, de watering preparing the bed |
| 227 | Item No.3:-Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor d |
| 228 | Item No.4-Providing dry trap/ granite/ quartzite/ gneiss rubble stone soling 15 to 20 cmsthick including hand packing and compacting complete. |
| 229 | Item No.5:-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to |
| 230 | Item No.6:- Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. includ |
| 231 | Item No.7:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compa |
| 232 | Item No.8:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pum |
| 233 | Item No.9:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compact |
| 234 | Item No.10 :- Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering,formwork, cover blocks compacting , curing , finishing and |
| 235 | Item No.11:-Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing a |
| 236 | Item no.12:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per d |
| 237 | Item No.13:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, r |
| 238 | Item No.14:-Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete. |
| 239 | Item No.15:-Providing second class burnt brick masonry with conveyntional /I.S. type brick in cement morter 1:6 in superstructure including striking joint on exposed faces racking outjointon exposed faces and watering and scaffolding complete. |
| 240 | Item no.16 :-Providing Bricks masonry in cement mortar 1:4 using ____ bricks in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter/2 hoop iron strips 25 mm X 1.6 mm at every third course, properly bent and bo |
| 241 | Item No.17:-Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars |
| 242 | Item No.18 :-Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping |
| 243 | Item No.19:- Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complet |
| 244 | Item No.20:- Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31 |
| 245 | Item no.21 : Providing and fixing mild steel grill work weighing 20 kg / sqm. for windows, ventilators etc. as per drawing including fixtures, necessary welding & painting with one coats of anti corrosive paint & two coats of oil painting complete. |
| 246 | Item No.22:-Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. fla |
| 247 | Item No.23:-Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round h |
| 248 | Item No.24:- Providing and constructing granite kitchen platform with fixing ofstainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappahtop 35 to 40 |
| 249 | Item No.25:-Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by bindin |
| 250 | Item no.26:- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. |
| 251 | Item No.27:-Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding, providing groove at joint of Brick Masonry and concrete members if necessary, cu |
| 252 | Item No.28:-Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 253 | Item No.29 :-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less t |
| 254 | Item No.30 :-Providing and layingmatt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling |
| 255 | Item No.31:-Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete.b) Granite |
| 256 | Item No.32:-Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling jo |
| 257 | Item No.33:-Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with w |
| 258 | Item No.34:-Providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joi |
| 259 | Item No.35:-Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushin |
| 260 | Item No.36:-Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. was |
| 261 | Item No.37:-Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. |
| 262 | Item No.38:-Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying a |
| 263 | Item No.39:-Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cem |
| 264 | Item No.40:-Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. |
| 265 | Item No.41:-Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron g |
| 266 | Item No.43:-Providing and applying two coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer |
| 267 | Item no.44:- Providing & applying two coats of lead/zinc base oil paint/bituminous paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface. (excluding prim |
| 268 | Item No.45:-Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. |
| 269 | Item No.46:-Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. |
| 270 | Item no 47 : Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. |
| 271 | Item No.48:-Providing and fixing board displaying information, such as "Name of work, Tender cost, Name of Contractor, Work completion and liability period etc", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sh |
| 272 | Item No.49:-Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete |
| 273 | Item No.50:-Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, plywood/steel formwork, laying/pumping, compacting, roughening them if special finish is to be pro |
| 274 | Item No.51:-Testing charges for M20 Cocncrete cube compressive strength…. |
| 275 | Item No.52:-Testing charges for sand silt content…. |
| 276 | Item No.53:-Testing charges for bricks water absorption , compressive…. |
| 277 | Item No.54:-Testing charges for Murum liquid limit and plastic limit…. |
| 278 | Item No.55:-Testing charges ofRubble /Stone …. |
| 279 | Item No.56 :- Roalty charges for quarry material. A)Rubble & H.M.1) Rubble |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
