}

Special Repair And Mtc Of Phs Providing Sanitary Fitting And Fixtures And Refilling And Replacement Of Fire Extinguishers In State Consumer Disputes Redressal Commission Sector 19 Ut Chandigarh, Chandigarh-Chandigarh

Chandigarh Administration Engineering Department has published Special Repair And Mtc Of Phs Providing Sanitary Fitting And Fixtures And Refilling And Replacement Of Fire Extinguishers In State Consumer Disputes Redressal Commission Sector 19 Ut Chandigarh. Submission Date for this Tender is 21-06-2021. Fire Extinguishers Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.




Tender Notice

28192301
Special Repair And Mtc Of Phs Providing Sanitary Fitting And Fixtures And Refilling And Replacement Of Fire Extinguishers In State Consumer Disputes Redressal Commission Sector 19 Ut Chandigarh
Open Tender
Indian
Chandigarh
Chandigarh
21-06-2021

Tender Details

Special Repair And Mtc Of Phs Providing Sanitary Fitting And Fixtures And Refilling And Replacement Of Fire Extinguishers In State Consumer Disputes Redressal Commission Sector 19 Ut Chandigarh

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Special Repair & Mtc. of PHS (Providing Sanitary fitting & fixtures) and refilling and replacement of Fire Extinguishers in State Consumer Disputes Redressal Commission Sector-19, U.T. Chandigarh. Ch. To: Annual Running and Prventive Mtc. of PHS in State Consumer Disputes Redressal Commission Sector-19, U.T. Chandigarh.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. DSR 10.25 NSR
2 2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25.2 NSR1 200 Kg.
3 3 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: DSR 17.1 NSR2
4 4 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR 17.1.1 NSR3 1 Each
5 5 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 NSR4
6 6 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 NSR5 2 Each
7 7 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. DSR 17.19 NSR6
8 8 10 litre (full flush) capacity-white DSR 17.19.1 NSR7 2 Each
9 9 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 NSR8
10 10 Semi rigid pipe DSR 17.28.1 NSR9
11 11 32 mm dia DSR 17.28.1.1 NSR10 15 Each
12 12 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18 NSR11
13 13 15 mm nominal bore DSR 18.18.1 NSR12 5 Each
14 14 20 mm nominal bore DSR 18.18.2 NSR13 5 Each
15 15 Providing and fixing uplasticised PVC connection pipe with brass unions :\n18.1.1 : 30 cm length DSR 18.21 NSR14
16 16 15 mm nominal bore DSR 18.21.1.1.1 NSR15 20 Each
17 17 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 NSR16
18 18 Circular tank DSR 18.48A NSR17 500 Per Ltr.
19 19 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49 NSR18
20 20 15 mm nominal bore DSR 18.49.1 NSR19 15 Each
21 21 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore DSR 18.53 NSR20
22 22 15mm nominal bore DSR 18.5.1 NSR21 10 Each
23 23 Supplying and fixing C.I. cover without frame for manholes : DSR 19.18 NSR22
24 24 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg DSR 19.18.1 NSR23 4 Each
25 25 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality DSR 19.19 NSR24
26 26 L D- 25 DSR 19.19.1 NSR25
27 27 Square shape 450 mm internal dimensions DSR 19.19.1.12 NSR26 1 Each
28 28 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. DSR 17.15 NSR27 2 Each
29 29 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16A NSR28 10 Nos.
30 30 Refilling of Fire Extinguishers A.B.C. (Dry Powder) Type of capacity 4 kg. as per ISI Standard job includes to & from carriage to filling station. NSR NSR29 12 Nos
31 31 Refilling of Fire Extinguishers CO2 Type of capacity 9 Litres as per ISI Standard job includes to & from carriage to filling station. NSR NSR30 19 Nos
32 32 Refilling of Fire Extinguishers CO2 Type of capacity 4.5 kg. as per ISI Standard and approved make. NSR NSR31 11 Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail