Public Health Engineering Department-PHED has published Construction Successful Testing And Commissioning Of 0 . 10 Mgd Rapid Sand Filtration Plant ( As Per Approved Design ) , Constt . Of Chain Link Fencing Around Various Structures , Providing Fixing Of Grill Work To Pst , Shifting Of 250/ 150Mm Dia. Submission Date for this Tender is 24-06-2021. Water Treatment Plant Tenders in Chairwari Dandmoh Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Name of Work: Constt. Successful Testing and Commissioning of 0.10 MGD Rapid Sand Filtration Plant (as per approved Design) , Constt. of Chain Link Fencing around various structures, Providing Fixing of grill work to PST, Shifting of 250/ 150mm dia D.I pipe lines from proposed Filtration Plant site and Laying Fitting of various dia pipe network in Chairiwari and Dandmoh W.S.S Chairiwari Dandmoh under NABARD. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge,disposed earth is to be levelled and neatly dressed in: | 1 | ||
2 | 1.01 | All kinds of soil. | 2 | 1643.45 | Cum |
3 | 2 | Providing stone soling and dumping in horizonalal in level quarry | 3 | 81.83 | Cum |
4 | 3 | Providing and laying in position cement conc. specified grade excld. Cost of centering and shuttering. All work up to plinth level. 1: 4: 8, (Crushed Agg.) | 4 | 60.96 | Cum |
5 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). | 5 | 41.32 | Cum |
6 | 5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shutteirng finishing and reinfrocement - All work upto plinth level 1:1:2 ( 1 cement : 1 coarse Sand : 2 graded stone aggregate 20mm nominal size ) | 6 | 42.58 | Cum |
7 | 6 | Strctural steel work in single section fixed without connecting plate including cutting,hoisting, fixing in position and applying a priming coat of approved steel\nprimer all complete. | 7 | 7649.33 | Kg. |
8 | 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement.\n1 1:2 (1 cement: 1 coarse sand : 2 graded crushed stone aggregate 20mm nominal size) | 8 | 78.45 | Cum |
9 | 8 | Centering and shuttering including strutting , propping etc annd removal of form work for : | 9 | ||
10 | 8.01 | Foundations, footing, bases of columns. | 10 | 346.2 | Sqm |
11 | 8.02 | Walls (any thickness) including attached pilasters, buttresses, plinth and string | 11 | 716.23 | Sqm |
12 | 8.03 | Columns, Pillars, Piers, Abutments, Posts and Struts | 12 | 155.46 | Sqm |
13 | 8.04 | Lintels, beams, plinth beams, girders, bressumers and centilevers. | 13 | 144.24 | Sqm |
14 | 8.05 | Suspended floors, roofs, landings, balconies and access platform. | 14 | 178.16 | Sqm |
15 | 8.06 | Extra for circular works Raft | 15 | 4.76 | Sqm |
16 | 8.07 | Extra for circular works above Raft | 16 | 44.58 | Sqm |
17 | 9 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level.\n1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) | 17 | 20.22 | Cum |
18 | 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement.\n1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) | 18 | 8.94 | Cum |
19 | 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | 19 | 27.82 | Cum |
20 | 12 | Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. | 20 | 18.22 | Cum |
21 | 13 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in\nCement mortar 1:6 ( 1 cement : 6 fine sand) | 21 | 35.34 | Cum |
22 | 14 | Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) | 22 | 35.34 | Cum |
23 | 15 | Boulder filling in walls including hand packing properly and all carraiges upto site | 23 | 36.84 | Cum |
24 | 16 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.\nThermo-Mechanically Treated bars. | 24 | 14500 | Kg. |
25 | 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners\nof required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): K.D Wood. | 25 | 1.95 | Cum |
26 | 18 | 12mm Cement plaster finished with a floating coat of neat cement of mix:\n1 : 3 ( 1 cement : 3 fine sand) | 26 | 905.69 | Sqm |
27 | 19 | Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 27 | 2907.35 | Kg. |
28 | 20 | Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.\n0.63mm thick with zinc coating not less than 27 5gm/m2 | 28 | 118.39 | Sqm |
29 | 21 | Providing ridges or hips of width 60cm overall width plain G.S.sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete.\n0.63mm thick with zinc coating not less than 275gm/m2 | 29 | 14.3 | Mtr |
30 | 22 | Providing & fixing of plain Eaves boarding of 2nd class kailwood 40mm thick & 30mm wide. | 30 | 38.92 | Mtr |
31 | 23 | Providing & fixing corrugated GS Sheet colour coated chajja ect., | 31 | 43.05 | Sqm |
32 | 24 | Supply and installation of PVC tees, end caps and P/L of 50mm PVC under drainage system with nominal size bore read with IS: 1592 of 1580. | 32 | 1 | Job |
33 | 25 | Providing and fixing of electrical points (heating and lighting) incl. cost of wire switches, necessary MCB's, switch boards, ceiling rose reputed make ISI mark screws, casing conduit material incl. all sorts of carraige and labour | 33 | ||
34 | 25.01 | Lighting points | 34 | 25 | No |
35 | 25.02 | Heating Points | 35 | 9 | No |
36 | 26 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. K.D Wood. | 36 | 18.93 | Sqm |
37 | 27 | Providing and fixing 35 mm thick wire gauze shutters , using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63mm for doors, windows and clerestory windows with hinges and necessary screws : K.D wood. | 37 | 18.93 | Sqm |
38 | 28 | P/F incl. successful testing and commissioning of air blower standard make ISI mark, capable of providing compression @ 15 cum per minute @0.35 Kgs/sqm suitable 3 phase induction electric motor 40hp Kirloskar/ Crompton Graves make complete with auxilary pipe system upto filter beds (two nos) filling pressure gauge nozzles, cement concrete, block base plate air check valve, non return valve complete job. | 38 | 1 | Set |
39 | 29 | P/F of mechanical equipment required for bleaching tank with electically driven paddles assembling fitted with suitable reduction gear mechanism coupled with three phases elctric mortor 1hp capacity Kirloskar/ Greaves/ Crompton make along with P/F of 32mm dia PVC pipe and pipe fittings upto clear water chamber, inlet water arrangement from back wash tank by P/F of 25mm dia G.I pipe with all necessary requirement. | 39 | 1 | Job |
40 | 30 | Providing fitting of mechanical equipment for Alum tank with electrically driven pedal assembly fitted with suitable reduction gear mechanism coupled with three phase electric motor 1 horsepower capacity Kirloskar/ Greaves/ Crompton make along with providing fitting of 40mm PVC Pipe and pipe fittings from alum tank to flash mixer, fixing of 25mm Dia G.I pipi with necessary pipe specials, Gate Valves of reputed make heavy duty from back wash to Alum Tank with G.I pipe specials and with all accessories. | 40 | 1 | Job |
41 | 31 | Providing fabrication and fixing of main panel board made out of angle iron fixed with 16mm ply board with sun mica fitted with required electrical appliances viz., 16amp switch fuse unit outgoing for clarifloculator/ floculator/ alum tank/ bleaching tanked flash mixer/ Back wash mortor 7.5 hp starter (reputed make ISI maek) for above said mortors preventive measures devices, volt meters/ indicator lamps, 100amp MCB, Bus bar, change over switches etc., with internal wiring. | 41 | 1 | Job |
42 | 32 | P/F, installation, successful commissioning of double flanged C.I/D.I pipes, pipe specials etc., incl. all carriages upto site. | 42 | ||
43 | 32.01 | 100mm dia pipe (tail piece) | 43 | 6 | Mtr |
44 | 32.02 | 150mm dia pipe | 44 | 24 | Mtr |
45 | 32.03 | 80/ 100/ 150mm equal tee with flanges. | 45 | 2 | No |
46 | 32.04 | 150mm dia MS bend with flanges. | 46 | 4 | No |
47 | 32.05 | 150x150x150mm tee with flanges. | 47 | 3 | No |
48 | 32.06 | 150mm dia tail piece with flanges. | 48 | 7 | No |
49 | 33 | P/F of double flanged sluice valves. | 49 | ||
50 | 33.01 | 150mm dia | 50 | 9 | No |
51 | 33.02 | 100mm dia | 51 | 4 | No |
52 | 33.03 | 80mm dia | 52 | 3 | No |
53 | 34 | Providing installation and successful commissioning of MS rotating dislodging bridge moving on rail, central bearing, fixed on peripheral beam of the clarifloculator with well designed MS trusses frame with hand rolling, chequered plate flooring complete job with suitable reduction gear arrangements coupled 5hp 3 phase induction motor of (Crompton/ Greaves/ Kirloskar make) complete job | 53 | 1 | Job |
54 | 35 | P/F of glass panes (floating glass) on top of window 3.5mm thick incl. all carriages upto site of work and beading etc as per requiremnt at site complete job. | 54 | 15.69 | Sqm |
55 | 36 | Supply, installation and successful commissioning mono block pumping unit (Crompton/ Greaves/ Kirloskar make) 3 phase induction mortor coupled 3hp with pumping unit 3000 gallons discharge per hour dynamic head 15m long with all accessories like foot valves, non return valves, cement concrete block, base plate, suction pipe, 65mm dia R/Main (class-B_ with heavy duty. | 55 | 1 | Job |
56 | 37 | P/F of mechanical equipment for flash mixer with electrically driven agitator assembly unit with suitable gear system coupled with 1HP 3 phase induction mortor on cement concrete. Bed with base plate. | 56 | 1 | Job |
57 | 38 | P/F, testing commissioning of drive assembly unit for churners of floculator with 3 phase induction mortor 2 HP capacity with Radicon reduction gear system and paddle set fixed on C/C base with base plate. | 57 | 1 | Job |
58 | 39 | Providing and fabrication of angle iron stair with chequered plates for riseers, hand railing on both sides with 2 coats of painting. | 58 | 1 | Job |
59 | 40 | Providing and installation of main cable from LT pole to main panel board 3 core under grounds or above as per requirement at site. | 59 | 50 | Mtr |
60 | 41 | P/F of 3 phase 50 c/c circuit connection for different electric mortors from main panel board (capacity varying 1HP to 5HP) | 60 | 500 | Mtr |
61 | 42 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc complete.\nOn concrete work | 61 | 905.69 | Sqm |
62 | 43 | Laying/Shrouding Supply of filter media at site of work from Ganderbal incl all carraiges leads lifts. Stacking of same as per shape and size ( as Per designed )\nSpecification :-\nSand ( Course sand and unifrom sand ) shall be free from dirt and shall be hard resistant and preferably of quartize and shall be 0.40 to 0.65 mm, should not lose more than 15% of its weight after being placed in Hyderolic acid for 24 hours \nThe specific gravity should be of range from 2.55 to 2.65.\n(c) Grade should be hard rounded durable free from flate thin or long pieces and clay | 62 | 19.5 | Cum |
63 | 44 | Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. Made of G. I. wire of dia 4mm. | 63 | 540 | Sqm |
64 | 45 | Providing push on joints to centrifugally ( spun) ductile pipe including testing of joints & including cost of rubber gaskets | 64 | ||
65 | 45.01 | 100mm dia pipes | 65 | 5 | Joints |
66 | 45.02 | 150mm dia pipes | 66 | 30 | Joints |
67 | 45.03 | 200mm dia pipes | 67 | 2 | Joints |
68 | 45.04 | 250mm dia pipes | 68 | 30 | Joints |
69 | 46 | Dismantling of D.I pipes ( external work ) including excavation and refilling trenches after taking out the pipes , manually/ by mechanical means including stacking of pipes within 50 meter lead. | 69 | ||
70 | 46.01 | 150mm dia D.I pipes | 70 | 150 | Mtrs |
71 | 46.02 | 250mm dia D.I pipes | 71 | 150 | Mtrs |
72 | 47 | Laying In Position centrifugally cast ( Spun ) Iron S&S or flanged pipes ( Excluidng cost of pipe ) | 72 | 114.88 | Qtls |
73 | 48 | Laying and fitting of G.I pipes complete excluding the cost of pipes and earthwork.\n | 73 | ||
74 | 48.01 | 80mm dia G.I pipe | 74 | 900 | Mtr |
75 | 48.02 | 65mm dia G.I pipe | 75 | 150 | Mtr |
76 | 48.03 | 50mm dia G.I pipe | 76 | 200 | Mtr |
77 | 48.04 | 40mm dia G.I pipe | 77 | 1000 | Mtr |
78 | 48.05 | 25mm dia G.I pipe | 78 | 2000 | Mtr |
79 | 48.06 | 20mm dia G.I pipe | 79 | 2500 | Mtr |
80 | 49 | Providing and Fixing of 80/ 65mm dia M.S flange 12mm thick G.I pipes . The job includes cutting of threaded portion pipes ends cost of nuts, bolts, rubber washers etc incl testing & Commissioniong complete all carriages. | 80 | ||
81 | 49.01 | 80mm dia G.I pipe | 81 | 66 | Joints |
82 | 49.02 | 65mm dia G.I pipe | 82 | 16 | Joints |
83 | 50 | Making connections of G.I Distribution with G.I main of following sizes incl providing/Fixing of Tees bends & Necessary cutting threading etc complete job \n | 83 | ||
84 | 50.01 | 25mm to 40mm dia nominal bore | 84 | 25 | No |
85 | 50.02 | 50mm upto 80mm dia nominal bore | 85 | 6 | No |
86 | 51 | Filling available excavated earth (excluding rock) in trenches, plinths, sides of foundation etc. layers not exceeding to 20cm in depth , consolidating each deposited layer by ramming and watering lead upto 50 mtr and lift upto 1.5 mtr. | 86 | 1059.45 | Cum |
87 | 52 | Fabrication , Providng fitting and Fixing in position MS bends / Specials of required size and degree as per requirement at site made out of 8mm thick MS plate including all carraiges testign and commissioning complete | 87 | 253 | Kg |
88 | 53 | Painting with redy mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even sahde \nNew Steel work ( Two or more coats ) | 88 | 873.02 | Sqm |
89 | 54 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12\nmm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | 89 | 203.58 | Sqm |
90 | 55 | Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand) : 25 mm thick | 90 | 98.71 | Sqm |
91 | 56 | Providing and fixing testing and successful commissioning of automatic manually operated voltage stablizar capacity 20KW reputed make ISI mark with copper coils housed in MS Tank/ Box fitted with rotter for increasing and decreasing voltage including copper connecting points mounted on back light/ asbestos plate fitted with oil, wheels for easy movement including necessary fittings, including all carriages upto site of work complete job. | 91 | 1 | Job |
92 | 57 | Providing installation power converyor for floculator. | 92 | 1 | Job |
93 | 58 | Providing fixing of bluck heads. | 93 | 8 | No |
94 | 59 | Providing fixing of halogen lights. | 94 | 4 | No |
95 | 60 | Providing fixing of earthen conductor. | 95 | 1 | Job |
96 | 61 | P/F of exhaust fans 350mm size reputed make ISI mark including all carriage complete job | 96 | 3 | No |
97 | 62 | Carriage of various materials by Mechanical Transport upto site of work. | 97 | ||
98 | 62.01 | G.I pipes from avg. lead to 35 Kms | 98 | 18.61 | M.Ton |
99 | 62.02 | Stone Aggregate Avg lead to 40 Kms | 99 | 269.81 | Cum |
100 | 62.03 | Sand and avg. lead to 26 Kms | 100 | 186 | Cum |
101 | 62.04 | Cement /steel avg. lead 25km. | 101 | 120.88 | M.Ton |
102 | 62.05 | Stone Soling avg lead 40 Kms | 102 | 81.83 | Cum |
103 | 62.06 | Bricks avg lead 65 Kms | 103 | 16787 | No |
104 | 63 | Carriages retreived (dismentled) D.I pipe from site to Divisional Store by Mechanical Transport avg. lead 35 Km. | 104 | ||
105 | 63.01 | 150mm dia | 105 | 150 | Mtr |
106 | 63.02 | 250mm dia | 106 | 150 | Mtr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail