}

Provision Of Electrically Operated Autoclave Machine Of Ot And Provn Of Heavy Duty Dry Cleaning Machine For Mechanical Laundry Plant At Ch ( Ec ) Under Ge ( A ) Kolkata, GE (A) KOLKATA-West Bengal

Military Engineer Services-MES has published Provision Of Electrically Operated Autoclave Machine Of Ot And Provn Of Heavy Duty Dry Cleaning Machine For Mechanical Laundry Plant At Ch ( Ec ) Under Ge ( A ) Kolkata. Submission Date for this Tender is 17-07-2021. Housekeeping Equipments Tenders in GE (A) KOLKATA West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

28185315
Corrigendum : Provision Of Electrically Operated Autoclave Machine Of Ot And Provn Of Heavy Duty Dry Cleaning Machine For Mechanical Laundry Plant At Ch ( Ec ) Under Ge ( A ) Kolkata
Open Tender
Indian
West Bengal
GE (A) KOLKATA
17-07-2021

Tender Details

Provision Of Electrically Operated Autoclave Machine Of Ot And Provn Of Heavy Duty Dry Cleaning Machine For Mechanical Laundry Plant At Ch ( Ec ) Under Ge ( A ) Kolkata

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 30-Jun-2021 CRITICAL DATE Date 10-07-2021
2 10-Jul-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 17-07-2021

Key Value

Document Fees
INR 1000 /-
EMD
INR 121000.0 /-
Tender Value
INR 64 Lakhs /-

BOQ Items

Nature of Work: PROVN OF ELECTRICALLY OPERATED AUTOCLAVE MACHINE OF OT AND PROVN OF HEAVY DUTY DRY CLEANING MACHINE FOR MECHANICAL LAUNDRY PLANT AT CH(EC) UNDER GE(A) KOLKATA
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Supply, installation, testing & commissioning of Horizontal Rectangular High pressure Sterilizer of chamber - 432 ltr as per IS 3829 (Part-I) including with all necessary safety features and required half length carriage made of SS 316 (01 No) & trolly made of MS (02 Nos) all as specified and as per manufacturer's recommendation complete all as per specified and as directed alongwith follwoing specifications:- \n(a)Material of chamber : AISI 316 quality stainless steel (b) Dimension of chamber: 600 mm width x 600 mm height x 1200 mm length (c) Volume of chamber :- 432 lits (approx)\n(d) Door: Hinge type manual double door with locking of radial arms\n(e) Material of door : Made of stainless steel 316 qualities\n(f) Mode of cycle operation : PLC control 6 cycles are available at different parameters\n(g) Material of boiler / steam generator : Stainless steel\n(h) Electric supply requirement : 3 Phase 4 wires, 400-440 volts, 50Hz AC supply\n(i) Sterilization time: 30 Minutes at 1340C & 45 Minutes at 1210C; Total cycle time : 60 Minutes.\n(j) Working Temperature: 1210C - 1340C working pressure : 1.2 - 2.2 Kg/cm2 \n(k) The unit would be manufactured as per IS specification Mark: IS3829 (Part-I) and also would bear the certification\n(l) The unit will be fitted with following accessories, like safety valve, vacuum breaker, vacuum dryer, check valve etc. The unit will be mounted on tubular stand of mild steel in a ready to use condition.\n Cont....\n\n BI0201819E35C4R102001 1 Each Set
2 1.01 Cont.... (m) The sterilizer will be fitted with all safety features. (n) Shall be provided with a dot matrix printer (o) Feed water pump : Water can be filled automatically ,whenever required with the help of feed water pump.\nNote:- (i) The sterilizer is a combination of PLC and MMI\n(i) Every stage of sterilization cycle will be displayed on MMI.\n(ii) PLC will go through self diagnostic checking system.\n(iii) If any error is found the same will also be displayed on the MMI.\n(iv) A microster with the facility of MMI (Main-Machine-Interface) is provided instead of manual cycle operated multi-port operating drive.\n(v) The operator can programme the cycles with his choice of different setting of time, temperature and corresponding pressure which can be used various contents / materials.\n(vi) The unit would be manufactured as per IS specification Mark IS 3829 (Part - I) and also would bear the certification. Make : Model no 24SR/E/DD/HP/HV/NAT-8 (Feed water pump) of NAT steel equipment Pvt Ltd or equivalent model of make Modi Enterprises(India)/Reliance Instruments Corporation \n
3 2 Supply, installation, testing & commissioning of 35 Kg Dry cleaning machine, high spin, soft mount, electrically heated, fully computerised with manual over - ride, up to 99% solvant recovery. 3 tanks Twin cartridge filters variable speed control device for delicate fabrics Make using perc solvant as for dry cleaning machine medium including foundation all as specified and as per manufacturer's recommendation complete all as per specified and as directed alongwith follwoing specifications:- \nNote:-\n(a) Rapid drying process ensure shorter cycle duration.\n(b) Upgraded filteration process to eliminate perc smell completely\n(c) Built in electrically panel to protect overloading, best suited for indian conditions\n(d) High productivity, minimum solvent consumption\n(e) High advance computer system\n(f) The basket is mounted on hub, completely static against un-balancing even at higher loads.\n(g) 3 storage tanks, Tank to tank perc transfer\n(h) Nylon ecological filters\n(j) One Microprocessor computer with memory manual override Make : Model no DC700 of Xcel Stiro Pvt Ltd or equivalent model of make Welco Garments Machinery Pvt Ltd , Stefab India Ltd BI0201819E35C4R102002 1 Each Set
4 3 Supply, Installation, testing and commissioning of CPRI approved cubical LT panel board of size (1.0X0.8X0.5) mtr , factory made, indoor type with single door made out of 2.0mm thick MS sheet, dust, vermin and water proof duly supported on 50 x 50 x6 mm angle iron frame, having locking arrangement at front and opening arrangement from front & rear both duly fitted with 600 amp rated aluminium electroplated copper busbar 4 strip with compression cable glands for entry & exit of cables, powder coated with two coats and having minimum clearance of 450mm above ground level complete including taking out old one all as specified and directed comprising of the following:-\n(a) MCCB 4 pole, 415 V, 125 Amp, 25 kA, Fixed Thermal & Fixed Magnetic setting type including spreader terminals - 02 No\n(b) MCCB 4 pole, 415 V, 63 Amp, 25 kA, type, Fixed Thermal & Fixed Magnetic setting type including spreader terminals - 03 No\n(c) Digital voltmeter 3 phase accuracy class 1 with in built selector switch - 01 set\n(d) Digital Ammeter 3 phase, 5 Amp with in-built selector switch and 3 Nos CTs 600/5 Amp - 01 Set\n(e) LED indicating lamps RYB with back up protection rewirable fust(set of three) - 01 set Note:- (i) Drawing shall be got approved by the GE before incorporation.\n(ii) PCC and earthwork if any shall be measured and paid separately under relevant item.\n BI0201819E35C4R102003 1 Each
5 4 Supply and fixing MCCB 100 Amps, 16 KA , 04 pole , Fixed Thermal & Fixed Magnetic setting type complete all as specified and directed\n BI0201819E35C4R102004 1 Each
6 5 Supply and fixing four pole MCB metal enclosure with din rail complete with and including MCB 63 Amps 04 pole all as specified and directed BI0201819E35C4R102005 2 Each
7 6 Supply, laying and testing of XLPE insulated, screened, PVC bedded galvanised steel strip , armoured heavy duty electric cable with aluminium conductor, 1100 volt grade 35 Sqmm 3 core complete all as specified and directed\n BI0201819E35C4R102006 245 RM
8 7 Excavation in trenches n.exc 1.5m wide and n exc 1.5m in depth; for foundation etc for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified & directed. BI0201819E35C4R102007 30 Cum
9 8 Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the sarting point complete all as specified and directed\n BI0201819E35C4R102008 12 Cum
10 9 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. BI0201819E35C4R102009 16 Cum
11 10 Material and labour for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed.\n(Note: Thickness after punning down shall be measured for payment) BI0201819E35C4R102010 12 Cum
12 11 Supply and laying well burnt bricks, sub class 'B' bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed. BI0201819E35C4R102011 1120 Each
13 12 Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding asjlar facing, dressed tone work and precast concrete complete all as directed by the Engr-in-Charge.\n BI0201819E35C4R102012 2.5 Cum
14 13 Material and labour for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. BI0201819E35C4R102013 2.5 Cum
15 14 Material and labour for 15mm thick plastering in CM(1:6) on other than fair faces of brickwork finished even and fair complete all as specified and directed.\n BI0201819E35C4R102014 2 Sqm
16 15 Supply and fixing 15mm bore Angle stop valve of PTMT of any colour high pressure screwed for iron pipe complete all as specified & directed. BI0201819E35C4R102015 2 Each
17 16 Supply and fixing bib tap standard of PTMT any colour high pressure screwed for\niron pipe (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and as directed. . BI0201819E35C4R102016 1 Each
18 17 Supply and fixing PVC connection pipe 15 mm dia, 60cm long fixed both side with PTMT nuts, complete all as specified and as directed. BI0201819E35C4R102017 2 Each
19 18 Supply and fixing 15mm dia GI pipe medium grade with all fittings and fixed to walls or laid in floors complete all as specified and as directed. BI0201819E35C4R102018 15 RM
20 19 Material and labour for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth wire 4.0 mm dia connected to test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1, RCC (1:2:4) type B1 precast cover slab with one handle made out of 8mm dia round bar, 20 mm dia (light grade) GI pipe with funnel for waiting and 15 mm dia (medium grade) protection pipe and providing layer of charcoal or coke and salt in alternative layers, necessary earth work complete as shown in Electrical plate No 3 as specified or indicated including testing on completion. BI0201819E35C4R102019 3 Each
21 20 Supply and fixing 20 mm dia MS water tubing , C class ,laid in trench / wall / floor including necessary band valve complete all as specified and directed BI0201819E35C4R102020 20 RM
22 21 Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs mentioned on Page No ___ shall be deducted from the total quoted amount of BOQ.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail