Military Engineer Services-MES has published Repair/Maintenance Of Day To Day Complaints Of Internal Electricfication , And Various Capacity Of Fans Of Otm And Md Accn At 213 Transit Camp Under Ge Nagrota . . Submission Date for this Tender is 05-07-2021. Electrification Work Tenders in JAMMU Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Name of Work: REPAIR/MAINTENANCE OF DAY TO DAY COMPLAINTS OF INTERNAL ELECTRICFICATION, AND VARIOUS CAPACITY OF FANS OF OTM & MD ACCN AT 213 TRANSIT CAMP UNDER GE NAGROTA. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Identifying and rectifying the defects pertaining to internal electrification of any type and nature such as taking down defective switch/socket/ceiling rose/holders/light fittings / fixtures any type, rectification of faulty electric circuits, tightening of loose connections, replacment of old u/s wiring/conduits/casing caping & connections etc, complete all as specified and directed. | 1400 | Each Job | |
| 2 | 2 | Identifying and rectifying the defects pertaining to internal electrification of any type and nature such as taking down defective MCBs / MCB DBs/TPN/ TPN DBs any type, rectification of faulty electric circuits, tightening of loose connections, replacment of old u/s wiring/conduits/casing caping & connections etc, complete all as specified and directed. | 300 | Each Job | |
| 3 | 3 | NOTE FOR ITEM NO 1 to 2 :-\n(a) All T & P/Stationeries and labour team required comprising of Nos of trained electricians & helpers will be provided by the contractor daily, as directed.\n(b) Rep of the contractor will present in complaint cell & responsible for receiving & attending the complaints from 08.30 Hrs to 04.30 Hrs the time of lodging the complaint. In absence of rep of Contractor penal recovery as decided by GE shall be imposed & on contractor.\n(c) Cost of minor stores such as screws,clamps,insulation tapes,nuts/bolts, nail of required size etc shall be deemed included in the above quoted rate. However, major items such as switches, sockets, bell push, fan regulator, light fitting and MCBs/DBs etc shall be measured and paid separately under appropriate items of Schedule 'A'.\n(d) Complaints where complete replacement of circuit/point wiring required shall be measured under relevent item.\n(e) If contractor fails to rectify the complaint with in 24 hours after reciving, Rs 500/- per complaint will be penalised. | |||
| 4 | 4 | Supply only in replacement Switch piano flush type 5 Amps single pole one way complete, complete all as specified and directed. | 750 | Each | |
| 5 | 5 | Supply only in replacement socket out let multipurpose suitable for 2/3 pin 5 amp flush type, complete all as specified and directed | 250 | Each | |
| 6 | 6 | Supply only in replacement switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed. | 250 | Each | |
| 7 | 7 | Supply only in replacement switch socket combination 2 in 1, 5 pin 5 /15 Amps flush type, complete all as specified and directed. | 150 | Each | |
| 8 | 8 | Supply only in replacement socket 2 in 1 5 pin 5 /15 Amps flush type, complete all as specified and directed. | 100 | Each | |
| 9 | 9 | Supply only in replacement switch piano flush type 15 Amps single pole one way complete | 100 | Each | |
| 10 | 10 | Supply only in replacement ceiling rose surface type, 2-3 terminal 65x50mm, complete all as specified and directed | 100 | Each | |
| 11 | 11 | Supply only in replacement step type fan regulator 300 watt, 230 volts, 50 HZ, AC, complete all as specified and directed. | 200 | Each | |
| 12 | 12 | Supply only in replacement batten/angle type holder insulated body with back plate, complete all as specified and directed. | 60 | Each | |
| 13 | 13 | Supply only in replacement bell push piano type 5 Amps, complete all as specified and directed. | 10 | Each | |
| 14 | 14 | Supply only in replacement electric bell ding dong 230 volt AC, complete all as specified and directed. | 20 | Each | |
| 15 | 15 | Supply only in replacement Integrel sleek extruded batten aluminium /CRCA channel fitting with LED 18 watt complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, , complete all as specified and directed. | 250 | Each | |
| 16 | 16 | Supply only in replacement baton integrated LED channel of 5W, 230V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less then 0.9, complete all as specified and directed. | 5 | Each | |
| 17 | 17 | Supply only in replacement white powder coated CRCA housing with LEDs 36W, 230 V, 50 Hz recess mounting LED 2 feet x 2 feet luminaries, Swamless front frame with flat white hight transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size , complete all as specified and directed. | 5 | Each | |
| 18 | 18 | Supply only in replacement LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 9 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz, complete all as specified and directed. | 10 | Each | |
| 19 | 19 | Supply only in replacement LED light fitting 18 W surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver having THD<20% complete with all accessories including connnecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V 50 Hz, complete all as specified and directed | 227 | Each | |
| 20 | 20 | Supply only in replacement LED bulb 7 watt, complete all as specified and directed. | 600 | Each | |
| 21 | 21 | Supply only in replacement LED tube rod suitable for any type of LED Tube Light fitting of 18/20 watt, complete all as specified and directed. | 300 | Each | |
| 22 | 22 | Supply only in replacement compact electronic ballast and FTL Rod suitable for any type fluorescent tube light fitting of 1x36 watt, connecting and testing, complete all as specified and directed. | 100 | Each | |
| 23 | 23 | Supply only in replacement compact electronic ballast and FTL Rod suitable for any type fluorescent tube light fitting of 1x28 watt, connecting and testing, complete all as specified and directed. | 100 | Each | |
| 24 | 24 | Supply only in replacement compact electronic ballast and FTL Rod suitable for any type fluorescent tube light fitting of 1x14 watt, connecting and testing, complete all as specified and directed. | 5 | Each | |
| 25 | 25 | Supply only in replacement modular Switch piano flush type 6 Amps, 230 V AC single pole one way, complete all as specified and directed. | 15 | Each | |
| 26 | 26 | Supply only in replacement modular Switch piano flush type 16 Amps, 230 V AC single pole one way, complete all as specified and directed. | 15 | Each | |
| 27 | 27 | Supply only in replacement modular socket outlet with shutter multipurpose suitable for 2 pin and 3 pin 6 amp flush type, complete all as specified and directed. | 15 | Each | |
| 28 | 28 | Supply only in replacement modular socket outlet with shutter multipurpose suitable for 6 pin 16 amp flush type, complete all as specified and directed. | 15 | Each | |
| 29 | 29 | Supply only in replacement modular bell Switch 6 Amps, 220 V single pole, complete all as specified and directed. | 10 | Each | |
| 30 | 30 | Supply only in replacement electronic modular fan regulator,Two module, electronic,step type and connection, complete all as specified and directed. | 15 | Each | |
| 31 | 31 | Supply only in replacement MCB single pole 32/40Amps, 10KA, 230 volts 'C' series, complete all as specified and directed. | 40 | Each | |
| 32 | 32 | Supply only in replacement MCB single pole 6 to 32 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed. | 100 | Each | |
| 33 | 33 | Supply only in replacement MCB single pole 40 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed. | 30 | Each | |
| 34 | 34 | Supply only in replacement MCB TP/TPN 50 to 63 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed. | 20 | Each | |
| 35 | 35 | Taking down carefully aluminium conductor point wiring (light fan, socket and power) complete with fittings such as switches, sockets, lamps holder, utility light fitting, fan regulator etc and making good disturbed surface of walls and floors etc. and keeping in safe custody for taking credit, complete all as specified and directed. | 300 | Per point | |
| 36 | 36 | Taking down unserviceable MCB DB SPN with MCB of any make/capacity, complete all as specified and directeed | 2 | Each | |
| 37 | 37 | Taking down unserviceable TPN DB with MCB of any make/capacity, complete all as specified and directeed | 2 | Each | |
| 38 | 38 | Taking down unserviceable sub main wiring including wooden batten/PVC conduct of any size , complete all as specified and directeed | 200 | RM | |
| 39 | 39 | M & L for Point wiring with PVC insulated, PVC unsheathed cable, single core, stranded, copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into with and including PVC casing capping not less than 20mm wide, ISI marked, with 1.5 Sqmm unsheathed, stranded copper cable for continuous earth wire and including pressed steel concealed terminal boxes of reqd size made out of 1.2 mm thick sheet covered with 2.8 mm thick plastic laminated bakalite (hylam) ISI marked sheet suitable for switches/sockets/regulators complete all as specified & directed for the following :- | |||
| 40 | 40 | One light/fan/exhaust point /bell point controlled by one switch | 160 | Per point | |
| 41 | 41 | One point for socket outlet 5 amp controlled by one switch on same board | 40 | Per point | |
| 42 | 42 | One point for socket outlet 5 amp on independent board | 50 | Per point | |
| 43 | 43 | All as per ser itme No. 39.00 here in before but point wiring for one 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board | 50 | Per point | |
| 44 | 44 | S & F in repair Sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed. | 2 | Each | |
| 45 | 45 | S&F in repair sheet metal enclosure distribution board SPN 08 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete. | 3 | Each | |
| 46 | 46 | S&F in repair sheet metal enclosure distribution board SPN 04 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete. | 3 | Each | |
| 47 | 47 | S & F in repair Sheet metal enclosure double door for distribution board factory made for MCB DB load link TPN 4 way suitable for MCCB as incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification, complete all as specified and directed. | 2 | Each | |
| 48 | 48 | S&F in repairs of MCCB 125 Amps, 4 pole, 415 Volts, 16 KA, with fixed thermal and fixed magnetic settings, complete all as specified and directed by Engr-in-Charge. | 2 | Each | |
| 49 | 49 | Sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 sqmm as earth continuity conductor connected to commen earth and earth dolly including taking down old cable, complete all as specified and directed. | 100 | RM | |
| 50 | 50 | Sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sqmm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sqmm as earth continuity conductor connected to commen earth and earth dolly including taking down old cable, complete all as specified and directed. | 100 | RM | |
| 51 | 51 | Disconnecting and taking down unserviceable Ceiling Fan, 1400/1200 mm sweep , 230 Volts AC supply Elecric driven single phasefrom position for winding and refixing for the same after winding, necessary connection, complete all as specified and directed.\nNote: Winding shall be measured and paid in respective item. | 350 | Each Job | |
| 52 | 52 | All as per ser itme No.51.00 here in before but exhaust fan of size 450/380/300/255mm sweep | 35 | Each Job | |
| 53 | 53 | All as per ser item No.51.00 here in before but wall mounted fan of size 450/400 mm sweep | 50 | Each Job | |
| 54 | 54 | M&L for collecting unserviceable ceiling fans 1200mm sweep 230 v, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the ceiling fan and taking out complete burnt winding from fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling , greesing & painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface of the fan with and including replacement of rusted /unserviceable nuts, bolts split pin rubber reel , machine screws, shaft etc including replacement of defective / unserviceable parts / spares as required reassembling the fan and testing complete deposinging the complete repaired fan to E/M store yard of GE Nagrota including transportation, complete all as specified and derected. | 200 | Each Job | |
| 55 | 55 | All as per ser itme No.54.00 here in before but ceiling fan of size 1400mm sweep | 150 | Each Job | |
| 56 | 56 | M&L for collecting unserviceable exhaust fan 450mm sweep 230 V, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the exhaust fan and taking out complete burnt winding from exhaust fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling & greesing painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface replacement of rubber pads and depositing the exhaust fan to E/M store yard GE Nagrota including transportation and testing etc complete all as specified and derected. | 15 | Each Job | |
| 57 | 57 | All as per ser item No.56.00 here in before but exhaust fan of size 300 mm sweep | 20 | Each Job | |
| 58 | 58 | M&L for collecting unserviceable wall mounted fan 450/400mm, sweep 230 V, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the wall mounted fan and taking out complete burnt winding from wall mounted fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling & greesing painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface replacement of rubber pads and depositing the wall mounted fan to E/M store yard GE Nagrota including transportation and testing etc, complete all as specified and derected. | 15 | Each Job | |
| 59 | 59 | Taking down carefully from position , ceiling fan, 1400 mm sweep, 230 volts single phase 50 Hz from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. \nNote: Neccessary accessories paid seperately in respective item. | 100 | Each Job | |
| 60 | 60 | All as per ser item No.59.00 here in before but ceiling fan of size 1200 mm sweep | 150 | Each Job | |
| 61 | 61 | Taking down carefully exhaust fan 230 volts single phase 50 Hz 450 mm sweep from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. \nNote: Neccessary accessories paid seperately in respective item. | 5 | Each Job | |
| 62 | 62 | All as per ser item No.61.00 here in before but exhaust fan of size 300/380 mm sweep | 10 | Each Job | |
| 63 | 63 | Taking down carefully wall mounted fan 230 volts single phase 50 Hz 450 mm sweep from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. \nNote: Neccessary accessories paid seperately in respective item. | 20 | Each Job | |
| 64 | 64 | Supply only in replacement of gun metal bush of required size suitable for ceiling fans and exhaut fans, complete all as specified and directed | 50 | Each | |
| 65 | 65 | Supply only in replacement of hanger for ceiling fan 1200mm/ 1400 mm sweep with nuts, bolts, washers, complete all as specified and directed. | 50 | Each | |
| 66 | 66 | Supply only in replacement ofaluminium blades for ceiling fan 1200 mm sweep, complete all as specified and directed. | 70 | Set of three | |
| 67 | 67 | Supply only in replacement of aluminium blades for ceiling fan 1400 mm sweep, complete all as specified and directed. | 65 | Set of three | |
| 68 | 68 | Supply only in replacement of bearing suitable for ceiling fan of any size, complete all as specified and directed. | 400 | Each | |
| 69 | 69 | Supply only in replacement of bearing suitable for Exhaust fan/Air circulator/wall mounted fan of any size, complete all as specified and directed . | 50 | Each | |
| 70 | 70 | M&L scrubbing and preparing the old painted surfaces of ceiling fan of size 1200/1400mm sweep complete including blade and painting the same with white duco paint and writing the MES Nos of the fans, 25mm with black synthetic enamel paint and including oiling greasing of any make, complete all as specefied and directed. | 600 | Each | |
| 71 | 71 | M&L scrubbing and preparing the old painted surfaces of exhaust fan of size 300/450mm sweep complete including blade and painting the same with white duco paint and writing the MES Nos of the fans, 25mm with black synthetic enamel paint and including oiling greasing of any make, complete all as specefied and directed. | 120 | Each | |
| 72 | 72 | Supply & Fix canopy top and bottom for ceiling fans, complete all a spcified and directed. | 50 | Each Set | |
| 73 | 73 | S & F in repairs flexible twin core 23/0.0076 with copper conductor including connecting fan of any make, complete all as specified and directed. | 600 | RM | |
| 74 | 74 | S&F GI pipe light grade 15 mm dia for fabrication of ceiling fan down rod with fixing arrangement of fan and clamp heavy duty as required in replacement complete all as specified and directed.\nNote: Length of down rod measured as per site requirement upto 3 mtr down. | 72 | RM | |
| 75 | 75 | S&F in replacement exhaust fan frame made out of MS sheet of any make and size of exhaust fan with suitable size of nut bolt and washers, complete all as specified and directed | 5 | Each | |
| 76 | 76 | Material and labour for replacement of Unserviceable Louvers with new louvers of exhaust fan 450mm sweep, complete all as specified and directed. | 5 | Each | |
| 77 | 77 | Material and labour for replacement of Unserviceable Louvers with new louvers of exhaust fan 300/380 mm sweep, complete all as specified and directed. | 5 | Each | |
| 78 | 78 | S&F in repairs oil filled condenser of 2.5 MFD capacity after removing existing unserviceable condenser from any situation, complete all as specified and directed. | 400 | Each | |
| 79 | 79 | S&F in repairs oil filled condenser of 4 MFD capacity after removing existing unserviceable condenser from any situation, complete all as specified and directed. | 70 | Each | |
| 80 | 80 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc , complete all as specified and directed | 100 | Each | |
| 81 | 81 | S&F blade suitable for wall mounted fan 400/450 mm sweep fan complete all as specified and directed | 5 | Each | |
| 82 | 82 | Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 34,292.50 during AOC\nNote:- Tenderers shall not quote for this Schedule | BI01010001010000000000000515BI0100001124 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
