}

Carrying Out Different Work Under Business Plan In The Area Of Ee , Eudd Iii , Mathura In The Jurisdiction Of The Superintending Engineer , Electricity Urban Distribution Circle , Mathura, EE, EUDD III, MATHURA-Uttar Pradesh

Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Carrying Out Different Work Under Business Plan In The Area Of Ee , Eudd Iii , Mathura In The Jurisdiction Of The Superintending Engineer , Electricity Urban Distribution Circle , Mathura. Submission Date for this Tender is 09-07-2021. Drilling and Exploration Equipment Tenders in EE, EUDD III, MATHURA Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

28175496
Corrigendum : Carrying Out Different Work Under Business Plan In The Area Of Ee , Eudd Iii , Mathura In The Jurisdiction Of The Superintending Engineer , Electricity Urban Distribution Circle , Mathura
Open Tender
Indian
Uttar Pradesh
EE, EUDD III, MATHURA
09-07-2021

Tender Details

Carrying Out Different Work Under Business Plan In The Area Of Ee , Eudd Iii , Mathura In The Jurisdiction Of The Superintending Engineer , Electricity Urban Distribution Circle , Mathura-1 Cartage Of Following Material From Store Centre, Mathura To Work Site. 2 St Pole / Pcc Pole ( 11 / 9 / 8.5 Mtr. Long ) 3 11Kv Xlpe Cable Of Size 3X300 / 240 / 185 Sq.Mm. 4 Lt Pvc Cable 1X630 / 400 Sq.Mm. 5 100 / 250 Kva Transformer 6 Other Line Material Such As Cross Arm, Ms Top Channel, Bottom Channel, Acsr Dog / Rabbit / Weasel Conductor, Insulator, Clamps, Nut & Bolts, Tpmo, Fuse Set Etc. 7 Digging Of Pit & Erection Of New Single Support St Pole ( 11 / 9 Mtr. Long ) For 11Kv Line Including Grouting Of Pole And Fixing Of All Clamps, Cross Arm, Pin / Disc Insulator & Other Accessories As Per Relevant Drawings. Any Fabrication If Required For Above Support. 8 Digging Of Pit & Erection Of New Double St Pole Structure ( 11 / 9 Mtr. Long ) For 11Kv Line / Transformer Including Grouting Of Pole And Fixing Of Top Channel, Dropper Channel, Insulators & Other Accessories As Per Relevant Drawings & Any Fabrication If Required For Above Support. 9 Digging Of Pit & Erection Of New Four St Pole Structure ( 11 / 9 Mtr. Long ) For 11Kv Line Including Grouting Of Pole And Fixing Of Top Channel, Dropper Channel, Insulators & Other Accessories As Per Relevant Drawings & Any Fabrication If Required For Above Support. 10 Earthing Of St Pole / Body For T / F By M.S Earth Rod. 11 Painting Of St Pole. 12 Digging Of Pit & Erection Of Stay Rod With Grouting Cement Sand And Brick Ballast Including Nuzzling, Binding Complete. 13 Laying Of 33 / 11Kv Line On Dog / Weasel Conductor On Erected Poles. 14 Guarding Of 33 / 11Kv Line. 15 Tail Less Unit 16 Providing & Laying Of Hdpe Pipe Of Dia 160 Mm Through Trenchless Method For Laying Of Cable By Horizontal Boring Machine Below The Ground Level Of 1.0 To 1.5 Mtr. 17 Laying Of Underground 11Kv Xlpe Cable Of Size ( 3X300 / 240 / 185 Sq.Mm ) Inside Hdpe Pipe. 18 Laying Of 11 Kv Xlpe Cable Of Size ( 3X300 / 240 / 185 Sq.Mm ) In Air On Double Pole Structure & Filling Of Cable Joint Kit With Proper Dressing. 19 Laying Of Lt Pvc Cable 1X630 / 400 Sq.Mm. 20 Providing & Fixing Of G.I Pipe Of Diameter 6 Inch For Riser. 21 Jointing Of Cable With Another Cable / Overhead Line At The D / P Structure Through33 / 11 Kv Outdoor Cable Jointing Kit 22 The Construction Of New Plinth Of Size 5’X5’X4’ Above Ground Level And One Ft. Below The Ground Level For 400 / 250 Kva Transformer 23 Installation Of Following Transformer On Plinth / Double Pole With All Connecting Accessories Jumering Etc. Including Carriage Of Transformers From Store Centre, Mathura To Work Site. 24 250 Kva Transformer On Plinth 25 100 Kva Transformer On Double Pole Structure 26 Construction Of M.S Angle Fencing Of Size ( 3M X3m X2m ) Around The Plinth Of 400 / 250Kva Transformer And Gap Between The M.S Angle Should Not Be More Than 65Mm. 27 Complete Chemical Earthingof 11 / 0.4 Kv 250 / 400 Distribution Transformer By Digging Pits 6” Dia Upto 3 Mtr. Deep Including Chemical Filled Pipe In Between ( Pipe-In-Pipe ) Isi Mark B Grade & Connecting With G.I Strip Of Size 50Mm X 6Mm With Neutral / Body Of 11 / 0.4 Kv Distribution Transformer To Above Pipe-In-Pipe ( Pip ) And Filling Of Chemical Crystalline Conductive Mixture Containing Highly Conductive Material Around The ( Pipe-In-Pipe ) Up To 3 Mtr. Including Making Of Chamber At The Top Of The Earthing. Other Details Are As Below:- N1.Earth Pipe Material – Mild Steel, Galvanised. N2-Main Electrode Diameter – 42.4Mm. N3-Auxiliary Electrode Pipe, Diameter – 76Mm. N4-Wall Thickness Of Main Electrode :- 2.6Mm. N5-Wall Thickness Of Auxiliary Ist Whole:- 3.2Mm. N6- Length Of Earthing Electrode ( Pip ) :- 3 Meter. 28 Dismantling Of Lt Line And Cartage Of Material From Work Site To Store Centre, Mathura. 29 Dismantling Of 100 Kva Transformer And Cartage Of Material From Work Site To Store Centre, Mathura. 30 Dismantling Of Iron Scrap And Cartage Of Material From Work Site To Store Centre, Mathura. 31 11 Kv Disc Insulator With Fitting 32 11 Kv Pin Insulator With Pin 33

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 25-Jun-2021 DATE CORRIGENDUM Date 02-07-2021
2 02-Jul-2021 DATE CORRIGENDUM 1 Date 09-07-2021

Key Value

Document Fees
INR 1000 /-
EMD
INR 7000.0 /-
Tender Value
INR 6.97 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail