}

Repair , Maintenance And Replacement Of Internal Wiring Including Fittings , Cooling Appliances , Ceiling Fans , Exhaust Fans , Electric Geysers And Connected Works At Sunjuwan , Balidan Stambh , Sainik Aram Ghar Under Ge Jammu, AoR of GE Jammu-Jammu And Kashmir

Military Engineer Services-MES has published Repair , Maintenance And Replacement Of Internal Wiring Including Fittings , Cooling Appliances , Ceiling Fans , Exhaust Fans , Electric Geysers And Connected Works At Sunjuwan , Balidan Stambh , Sainik Aram Ghar Under Ge Jammu. Submission Date for this Tender is 07-07-2021. Electrification Work Tenders in AoR of GE Jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

28165951
Corrigendum : Repair , Maintenance And Replacement Of Internal Wiring Including Fittings , Cooling Appliances , Ceiling Fans , Exhaust Fans , Electric Geysers And Connected Works At Sunjuwan , Balidan Stambh , Sainik Aram Ghar Under Ge Jammu
Open Tender
Indian
Jammu And Kashmir
AoR of GE Jammu
07-07-2021

Tender Details

Repair , Maintenance And Replacement Of Internal Wiring Including Fittings , Cooling Appliances , Ceiling Fans , Exhaust Fans , Electric Geysers And Connected Works At Sunjuwan , Balidan Stambh , Sainik Aram Ghar Under Ge Jammu

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 30-Jun-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 07-07-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 96000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIR, MAINTENANCE AND REPLACEMENT OF INTERNAL WIRING INCLUDING FITTINGS, COOLING APPLIANCES, CEILING FANS, EXHAUST FANS, ELECTRIC GEYSERS AND CONNECTED WORKS AT SUNJUWAN, BALIDAN STAMBH, SAINIK ARAM GHAR UNDER GE JAMMU.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Charges for attending day to day/ E/M petty complaint in respect repair/rectification of fault in electric fitting MCB DBs,internal wiring LT Panel and fixture and rectify the faults and replacement of unsv any type of fitting/fixture, MCB's , any type, bakalite sheet restore the electric supply and made the item functionable light point, fan point, socket point 5A/15A, switches sockets, fan regulator, light fixtures any type of lamp, MCB DBs & all electrical acessories and day to day /door to door maintenance, making the points/accessories serviceable in all respect with replacement of any minor parts like small length of wires (not more than 1 mtr) and other connected minor acessories. work shall also include to check & removal of leakge in service connection/submains of houses as and as directed. The scope also include cutting of existing bakelite sheet to accommodate new wiring acessories all type electric fitting/fixture. 1000 Each Job
2 1.01 Note : Any other replacement of major items shall be measured & paid under respective items as supply only. Fixing charge of fitting/fixture and MCB's of any type is deemed to be included in the above item.
3 1.02 (i) Contractor representative/Engineer will report to complaint cell for morning and afternoon to collect reoutine/urgent nature of complaint related to internal electric supply till completion of contract. The work shall be attended by the contractor immediately. The contractor will ensure availability of manpower (two electrician and two helper) equipped with all sort of petty items such as insulation tape, galvanised screwes, nuts, bolts, washers etc required to accomplish the job. The contractor will also ensure as availability of every type od requisite T&P items to his tradesman. All routine/ urgent job received on job slip will be repaired & got signatue of user's and will be deposited to complaint cell with in 24hrs. In case of any delay in attending the complaint more than 12hrs after handing over of routine/urgent works, the contractor shall be liable to pay the penalty as per the item rate. \n(ii) Contractor shall maintain the maintenance register showing all daily complaints received and shall maintain job card for attending complaints. The signature of the user shall be obtained on the job card showing the materials used in the work after completion of the job.\n(iii) If the Contractor did not attend complaints a penalty of Rs 300/- per day per complaint recovery shall be made from the work done amount.\n(iv) The MES Department is not responsible for the payment of staff hired by contractor for complaint rates for attending the complaints by the electrician are deems to included in the item for repairi.e. Electrician/Helper, as all the items of CA are to be supply and fixed by the contractor.\n(v) Proper record (date wise) of complaints received & rectified by the contractor shall be produced for verification at the time of payment of each RAR/Bill.\n(vi) All the complaint slip,register and connected document will be provided by the contractor without any extra cost.\n(vii) After any repair the site has to be cleaned and make the surface good.
4 2 Supply only switch piano, flush type single pole one way 5Amp, 240 volts ISI marked complete all as specified and directed. 100 Each
5 3 Supply only socket outlet 2 in 1, 3 pin, 5A complete all as specified and as directed. 50 Each
6 4 Supply only switch socket outlet combined 5 pin 5 amp flush type, 240 volts ISI marked complete all as specified and directed. 40 Each
7 5 Supply only switch socket outlet combined 2 in 1, 3 pin 5 amp and 15 amp flush type, 240 volts ISI marked complete all as specified and directed. 50 Each
8 6 Supply only socket outlet 3 pin, 15 Amp, flush type, 240 Volts, 6 pin flush type complete ISI marked complete all as specified and directed. 50 Each
9 7 Supply only switch piano, flush type single pole one way 15 Amps, 240 volts ISI marked complete all as specified and directed. 80 Each
10 8 Supply only Ceiling Rose 3 terminal surface type complete all as specified and as directed. 40 Each
11 9 Supply only Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. 50 Each
12 10 Supply only bell, AC 230 Volts single pole complete all as specified and as directed. 20 Each
13 11 Supply only bell push flush type single pole one way 5 amp complete all as specified and as directed. 20 Each
14 12 Supply only holder any type for batten fitting incl taking old one ISI marked complete all as specified and directed. 50 Each
15 13 Supply only MCB SP 6 to 32 Amps, 240 Volt 'B' Series complete all as specified and as directed. 30 Each
16 14 Supply only SPN 32 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) complete all as specified and as directed. 94 Each
17 15 Supply only SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) complete all as specified and as directed. 36 Each
18 16 Supply only stepped type electronic fan regulator flush type as required complete all as specified and as directed. 36 Each
19 17 Taking down old unsv copper/aluminium point wiring concealed/batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. 915 Per Point
20 18 M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS,PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid/steel conduit and into existing CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. \nNote : (a) Wiring shall be done by using proper colour coding\n(b) Earth wire shall be of green colour \n(c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge. 250 Per Point
21 19 All as per item No 18.00 here-in-before but One 5 pin socket outlet 5 amps on the same board complete all as specified and as directed. 40 Per Point
22 20 All as per item No 18 here-in-before but One 5 pin socket outlet, 5amps on independent board complete all as specified and as directed. 40 Per Point
23 21 All as per Item No 18 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with cables 2.5 sqmm size complete all as specified and as directed. 30 Per Point
24 22 M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid/ 1.8mm wall thickness ISI marked including new CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. \nNote : (a) Wiring shall be done by using proper colour coding\n(b) Earth wire shall be of green colour \n(c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge. 225 Per Point
25 23 All as per item No 22.00 here-in-before but 5 Amp socket outlet on same board complete all as specified and as directed. 35 Per Point
26 24 All as per item No 22.00 here-in-before but socket outlet 5 Amps independent board complete all as directed by Engr-in-Charge. 30 Per Point
27 25 All as per Item No 22.00 here-in-before but for one 6 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and as directed. 30 Per Point
28 26 All as per item No 22.00 here-in-before but drawn through and including new surface conduit PVC rigid non metallic conduit 20 mm dia for socket outlet 5 amp independent board complete to accomodate the accessories for PVC Gang Box complete all as specified and as directed. 20 Per Point
29 27 All as per item No 22.00 here-in-before but drawn through and including new surface conduit PVC rigid non metallic conduit 20 mm dia for socket outlet 15 amp independent board complete to accomodate the accessories for PVC Gang Box complete all as specified and as directed. 20 Per Point
30 28 M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid/ 1.8mm wall thickness ISI marked including pressed steel with existing colour terminated boxes of Modular Metal flush Boxes of any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following: - \nNote: - Suitable module white cover sheets with frame as specified to be provided in replacement to MS/Galvanised sunken boxes and measured & paid separately as per relevant item.\nNote : (a) Wiring shall be done by using proper colour coding\n(b) Earth wire shall be of green colour \n(c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge. 100 Per Point
31 29 All as per item No 28.00 here-in-before but 5 Amp socket outlet on same board complete all as specified and as directed. 44 Per Point
32 30 All as per item No 28.00 here-in-before but socket outlet 5 Amps independent board complete all as directed by Engr-in-Charge. 25 Per Point
33 31 All as per Item No 28.00 here-in-before but for one 6 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and as directed. 26 Per Point
34 32 S&F in replacement Modular switch 1 way 6A,1 module, 240 volts ISI marked complete all as specified and directed. 100 Each
35 33 S&F in replacement Modular switch 1 way 16A, 1 module, 240 volts ISI marked complete all as specified and directed. 44 Each
36 34 S&F in replacement Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. 92 Each
37 35 S&F in replacement Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. 40 Each
38 36 S&F in replacement Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed. 80 Each
39 37 S&F in replacement Modular Metal flush box 1/2 module, 240 volts ISI marked complete all as specified and directed. 44 Each
40 38 S&F in replacement Modular Metal flush box 3 module, 240 volts ISI marked complete all as specified and directed. 40 Each
41 39 S&F in replacement Modular Metal flush box 4 module, 240 volts ISI marked complete all as specified and directed. 24 Each
42 40 S&F in replacement Modular Metal flush box 6 module, 240 volts ISI marked complete all as specified and directed. 20 Each
43 41 S&F in replacement Modular Metal flush box 8 module, 240 volts ISI marked complete all as specified and directed. 8 Each
44 42 S&F in replacement Modular white cover plate with frame 1 module complete all as specified, 240 volts ISI marked complete all as specified and directed. 20 Each
45 43 S&F in replacement Modular white cover plate with frame 2 module complete all as specified, 240 volts ISI marked complete all as specified and directed. 24 Each
46 44 S&F in replacement Modular white cover plate with frame 3 module complete all as specified, 240 volts ISI marked complete all as specified and directed. 40 Each
47 45 S&F in replacement Modular white cover plate with frame 4 module complete all as specified, 240 volts ISI marked complete all as specified and directed. 24 Each
48 46 S&F in replacement Modular white cover plate with frame 6 module complete all as specified, 240 volts ISI marked complete all as specified and directed. 18 Each
49 47 S&F in replacement Modular white cover plate with frame 8 module complete all as specified, 240 volts ISI marked complete all as specified and directed. 8 Each
50 48 M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and as directed by Engr-in-Charge.\nNote: - Distribution board and MCB's should be of same make. 2 Each
51 49 M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engr-in-Charge.\nNote: - Distribution board and MCB's should be of same make. 6 Each
52 50 M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and as directed by Engr-in-Charge.\nNote:- Distribution board and MCB's should be of same make. 2 Each
53 51 S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed magnetic setting of cap 125 Amps 16 KA complete all as specified and as directed. 2 Each
54 52 S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed. 24 Each
55 53 S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 Amp, in the MCB DB Complete with connection, testing and commissioning complete all as specified and as directed. 24 Each
56 54 Supply and fixing 415V, 10KA 'B' curve TPN 40 to 125 Amp miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection, testing and commissioning complete all as specified and as directed. 10 Each
57 55 S&F in replacement for switch piano, flush type single pole one way 5 Amp, 240 volts complete all as specified and as directed. 620 Each
58 56 S&F for switch piano, flush type single pole one way 15 Amps, 240 volts complete all as specified and as directed. 80 Each
59 57 S&F in replacement socket outlet 2 in 1, 3 pin, 5A complete all as specified and as directed. 165 Each
60 58 S&F socket outlet 5 pin, 15 Amp, flush type, 240 Volts, 6 pin flush type complete all as specified and as directed. 80 Each
61 59 S&F in replacement switch socket outlet combined 5 pin 5 amp flush type, 240 volts complete all as specified and as directed. 165 Each
62 60 S&F in replacement switch socket outlet combined 2 in 1, 3 pin 5 amp and 15 amp flush type, 240 volts complete all as specified and as directed. 50 Each
63 61 S&F for bell push, flush type single pole, 5 Amp, 240 volts complete all as specified and as directed. 10 Each
64 62 S&F Ceiling Rose 3 terminal surface type complete all as specified and as directed. 80 Each
65 63 M&L in replacement for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. 250 Each
66 64 M&L in replacement self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed. 500 Each
67 65 S&F in replacement of FTL/ LED lights fitting with 20 W LED 230 Volts 50 Hz 4 feet long made out of plastic with opal diffuser for glare free and smooth light distribution, 6500 K cool day type conforming to ISI including LED tube light connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. 350 Each
68 66 S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 9 watt 220 V AC including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and as directed. 69 Each
69 67 S&F in replacement bulk head luminaries with energy efficient IP-66 rated integrated LED oval bulk head suitable for surface mounting constructed from tough corrosion resistant plastic with a black finish with opal diffuser 10 watt, 230 Volts complete all as specified and as directed by Engr-in-Charge. 10 Each
70 68 S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and as directed. 4 Each
71 69 S&F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and as directed. 50 Each
72 70 S&F in replacement Calling bell Ding Dong/buzzer AC 230 Volts, single pole complete all as specified and as directed. 50 Each
73 71 M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. \nNote : Wiring shall be done in proper colour coding. 180 RM
74 72 M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqrmm for phase and neutral and one run of 2.5 Sqrmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. \nNote : Wiring shall be done in proper colour coding. 180 RM
75 73 M&L in replacement for wiring for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 1 run 2.5 Sqrmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unsv wiring complete all as specified and as directed.\nNote : Wiring shall be done in proper colour coding. 180 RM
76 74 M&L in replacement for wiring for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 1 run 1.5 Sqrmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unsv wiring complete all as specified and as directed.\nNote : Wiring shall be done in proper colour coding. 360 RM
77 75 M&L for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. 2 Each
78 76 S&F in replacement unsv wooden/CI Shunken box with new CRCA presseed steel terminal box of size 7X4' including taking down old complete with cemented and patch work all as specified and as directed by Engr-in-Charge. 10 Each
79 77 S&F in replacement unsv wooden/CI Shunken box with new CRCA presseed steel terminal box of size 4X4' including taking down old complete with cemented and patch work all as specified and as directed by Engr-in-Charge. 20 Each
80 78 S&F in replacement unsv wooden/CI Shunken box with new CRCA presseed steel terminal box of size 10X8' including taking down old complete with cemented and patch work all as specified and as directed by Engr-in-Charge. 10 Each
81 79 Supply and fixing in replacement Bakelite hylum sheet 3 mm thick complete with cutting and making size for fixing switches (06 No's each) of size 8''X5'' all as specified and directed. 10 Each
82 80 Supply and fixing in replacement Bakelite hylum Sheet 3 mm thick complete with cutting and making size for fixing switches (12 No's each) of size 12''X10'' all as specified and directed. 10 Each
83 81 Supply and fixing in replacement Bakelite hylum Sheet 3 mm thick complete with cutting and making size for fixing switches (02 No's each) of size 5''X5'' all as specified and directed. 20 Each
84 82 Supply and fixing in replacement plug top 15 Amps complete all as specified and directed. 142 Each
85 83 S&F in replacement of Vertical Distribution Board (TP&N) 4 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed including taking down old UNSV DB/MCB any type.\nNote:- (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings. \n(ii) MCB's shall be measured and paid separately.\n(iii) TPN DB and MCCB should be of same make. \n 5 Each
86 84 S&F in replacement PVC box (gang box) surface mounted heavy duty 3 way complete with socket outlet 2 in 1, 6 pin 5 amp 240 volt alongwith switch piano 5 amp 240 volt complete all as specified and as directed. 10 Each
87 85 S&F in replacement PVC box (gang box) surface mounted heavy duty 3 way complete with socket outlet 2 in 1, 6 pin 5 amp 240 volt alongwith switch piano 15 amp 240 volts complete all as specified and as directed. 10 Each
88 86 Notes :- (i) For Serial No 17 to 85 : The Contractor has to complete the work assigned for above items with in 72 hrs failing in which recovery at the rate 25 Rs. Per complaint per day.\n(ii) The MES Department is not responsible for the payment of staff hired by contractor for complaint rates for attending the complaints by the electrician are deems to included in the item for repaired. Electrician/Helper, as all the items of CA are to be supply and fixed by the contractor.\n(iii) Proper record (date wise) of complaints received & rectified by the contractor shall be produced for verification at the time of payment of each RAR/Bill.\n(iv) All the complaint slip, register and connected document will be provided by the contractor without any extra cost.\n(v) After any repair the site has to be cleaned and make the surface good.\n\n
89 87 Taking down ceiling fans/Exhaust fan of any size/type from existing position (from ceiling or on wall) sealing cable end, dismantling blades for repair/servicing of ceiling fan of any capacity complete with strip opening the ceilling fan for repair/washing/varnishing and removing of old lubricating substance from bearing/bush using Kerosine oil, carying out fresh lubrication using grease and to make the ceiling Fan noise free for smooth functioing, including replacement of worn out/unserviceable minor spare parts split pin, fan body bolts, spring washer, fan rod bolt etc and PVC insulated, unsheathed stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 1.0 M long, assembling the repaired ceiling fan in existing position and testing to the entire satisfication of Engineer-in-Charge on site. (Replacement of Spares flexible wire etc/rewirding of ceiling fan/capacitor with clamps shall be measured and paid seperately under respective item for material and labour cost).\nNote:- Burnout winding ceiling fans will be taken out for repair/rewinding. 1600 Each
90 88 All as per item No. 87.00 here-in-before but for exhaust Fan of any type mm sweep complete all as specified and as directed. 100 Each
91 89 All as per item No. 87.00 here-in-before but for wall mounting Fan of any size/ type complete all as specified and as directed.\nNote:- Burnout winding Exhaust fans/Wall fans will be taken out for repair/rewinding. 20 Each
92 90 Rewinding of ceiling fan, of any make/type and size (1200/1400 mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per manufacturer's specification, including replacement of all insulation materials, varnishing, heating, drying, assembling of stater/rotor, connection and testing complete all as specified and as directed. 600 Each Job
93 91 All as per item No. 90.00 here-in-before but for exhaust fan of any make/type and size complete all as specified and as directed. 60 Each ob
94 92 All as per item No. 90.00 here-in-before but for wall mounting fan of any make/type and size complete all as specified and as directed. 6 Each Job
95 93 Labour for remetalling of worn out shaft of fan, cutting, brazing, machining and polishing to make the shaft suitable for fixing of new ball bearing and fixing ball bearing in replacement of bushing system in ceiling fan and assembling the same and testing to the entire satisfaction of Engineer-in-Charge to ensure smooth and noise free operation complete all as specified and as directed.\nNote: - (Bearing shall be measured and paid separately). 300 Each Job
96 94 Supply and fixing ball bearing of any size and type, suitable for any type/make/size of ceiling Fan complete all as specified and as directed. 600 Each Job
97 95 All as per item No. 94.00 here-in-before but for exhaust fan of any type/make and size complete all as specified and as directed. 30 Each Job
98 96 All as per item No. 94.00 here-in-before but for wall mounted fan of any type/Make and size complete all as specified and as directed. 6 Each Job
99 97 Supply only stepped type electronic fan regulator flush type as required complete all as specified and as directed. 400 Each
100 98 Supply, fixing in replacement of capacitor 230 Volt AC 50 Hz, conforming to IS-1709 and rated capacity 2.5 MFD for ceilling fan, Exhaust Fan and Wall mounted Fan complete all as specified and as directed. 800 Each
101 99 All as per item No. 98.00 here-in-before but of rated capacity 4.0 MFD for Exhaust Fan complete all as specified and as directed. 50 Each
102 100 Supply and connection of PVC insulated, unsheathed multi stranded, three core twisted copper flexible cable of size 1.5 Sqmm as required complete all as specified and as directed. 1500 RM
103 101 Supply and fixing only bush of suitable size for exhaust fan of any type/size as per existing type complete all as specified and as directed. 50 Each
104 102 All as per item No. 101.00 here-in-before but suitable for wall mounted fan of any type/size as per existing type complete all as specified and as directed. 6 Each
105 103 Supply and fixing of PVC connector 4 way 6 Amps with connection screws, nuts complete all as specified and as directed. 100 Each
106 104 Supply and fixing of PVC clamps with fixing screws for holding capacitor of any type and size complete all as specified and as directed. 100 Each
107 105 Supply and fixing of GI/ MS anodized bolts with anodized nuts, spring washers, split pin etc size 50 mm long 10 mm dia half threaded type with split pin hole complete all as specified and as directed. 180 Each
108 106 S&F in replacement MS clamp for down rod of suitable size including gromet / reel type rubber pad with bolts, nuts,split pin and washers suitable for housing ceiling fan complete all as specified and as directed. 50 Each
109 107 S&F in replacement of ceilling fan down rod 12 mm dia and 30/45 cm long complete with MS Clamp Rubber reel, split pin nut bolts etc complete all as specified and as directed. 50 Each
110 108 Supply and fixing in replacement of louver shutter made of MS sheet metal 1.2 mm thick for round base and 0.8 mm thick for flaps, comprising of mounting legs frames made of MS flat strips of size 25mm x 3mm includidng heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall at ground/first/second floor etc complete with using fastener bolt, driling, (spray painting) over a coat of primer for exhust fan up to 400 mm sweep incl taking down old one complete all as specified and as directed.\nNote: Rates are deems to be including charges for hiring any type of T&P, Ladder, cutter etc\n(i) Contractor shell be responsible for life cover of staff deployed for fixing lover shutter. 7 Each
111 109 Cleaning of ceiling fan assembly of any type/size and carrying out two coats of spray painting with first quality synthetic enamelled paint of approved colour, including writing of MES number in black paint all as directed and specified. 100 Each job
112 110 All as per item No.109.00 here-in-before but for exhaust fan upto 450 mm complete all as specified and as directed. 50 Each Job
113 111 S&F in replacement PVC canopy set of two pieces for ceiling fans of any size complete all as specified and as directed. 50 Each Set
114 112 Repair to oscillation moving part of wall mounted fan including replacement of all wornout components, bearing, lubrication and assembling complete all as specified and as directed. 8 Each
115 113 S&F ceilling fan blades set of 3 pieces suitable for 1200/1400 mm sweep of white/brown/ivory colors complete all as specified and as directed. 10 Each
116 114 M&L for repair/Maint to desert coolers complete with and including cleaning, scrapping/rubbing old rusted surface, filling cavities and painting with two coats of high quality aluminium paint externally and black paint to water storage tank internally with synthetic enamelled paints complete with replacement of necessary nut, bolts, rubber pads for fan motors and writing MES No/unit name all as specified and directed by the Engr-in-Charge. 100 Each Job
117 115 Supply and fixing in replacement of desert cooler fan motor 90 watt,1400 RPM, 230 volt 50 Hz single phase conforming to ISI complete with fan blade and capacitor of suitable size complete all as specified and as directed. 120 Each
118 116 Supply and fixing in replacement of Desert cooler submersible pumping set single phase 230 volt, 50 Hz of 0.25 to 1.0 HP conforming to ISI complete with lead complete all as specified and as directed. 150 Each
119 117 Supply and fixing in replacement of PVC accessories of desert cooler i.e. PVC pipe 20 mm dia heavy duty 2 mtr appx, PVC distributor 4 way with nut, bolts, PVC elbow-03 No's, MS clamps etc all as specified and directed. 80 Each Set
120 118 Supply and fixing in replacement of desert cooler fan motor blade of existing size made out from MS having duty complete with key bolt complete all as specified and as directed. 40 Each
121 119 Supply and fixing in replacement of desert cooler front ventilator cover of MS of suitable size complete with selector switch, switch PT 5 Amp, indicator lamp and electric wiring, fixing nut, bolts of suitable size all as specified and directed. 10 Each
122 120 Supply and fixing in replacement of desert cooler side opening cover made out from heavy duty MS sheet and matching with the existing Desert cooler body size complete with Khas Khas pads set of three pieces all as specified and directed. 8 Each Set
123 121 Supply and fixing in replacement of Desert Cooler UNSV/leakage body made out from heavy duty MS sheet bend to shape company manufacturer, complete with internal PVC accessories i.e. PVC elbow-03 No's, PVC distributor 4 way-01 No, PVC distrbution pipe-2 mtr appx, Black painted internally, Aluminium painted externally complete with Provn of necessary arrangement for fixing front cover and fan motor all as specified and directed. 5 Each
124 122 Supply and fixing in replacement cable PVC insulated and sheathed of size 1.5 sqmm 3 core FRLS 230 volt, 50 Hz conforming to ISI all as specified and directed. 180 RM
125 123 Supply and fixing in replacement cable PVC insulated and sheathed of size 2.5 sqmm 3 core FRLS 230 volt, 50 Hz conforming to ISI all as specified and directed. 180 RM
126 124 Supply and fixing in replacement cable PVC insulated and sheathed of size 4.0 sqmm 3 core FRLS 230 volt, 50 Hz conforming to ISI all as specified and directed. 90 RM
127 125 M&L for fabrication of Desert Cooler stand made out from angle iron 40X40X6 mm thick, bend to shape, welding as per site requirement fixing in brick/stone masonary wall complete with cemented work necessary rawl plug, nut, bolts etc all as specified and directed. 30 Each Job
128 126 Supply and fixing in replacement of Desert Cooler ON/OFF rotary selector switch of suitable size for speed controller complete all as specified and as directed. 80 Each
129 127 Supply and fixing in replacement of PVC accessories of capacitor 2.5 MFD for Desert Cooler fan motor, 230 volt 50 Hz complete all as specified and as directed. 80 Each
130 128 Supply and fixing in replacement of unsv Khas Khas/Glass wool for desert cooler set of three pieces complete all as specified and as directed. 150 Each Set
131 129 Repair/Maint/Servicing to refrigerator/deep freezer/water coolers/AC's of any capacity and model by replacing capilary tubing, gas chargings, rectification of leakage in capillary tubing/Chiller plant/water tanks, condensing coils, repair to wiring, flushing/cleaning condensing/cooling coils/internal/External unit of split AC, greasing to blower motors, replacement of spare parts, fan belts and make refrigerator/deep freezer/water coolers/AC's in serviceable condition all as specified and directed by Engr-in-Charge.\nNote: - Spare/Gas charging shall be paid separately. 38 Each Job
132 130 Charges for fixing in replacement of unsv sealed seamless welding compressor unit company manufacturer of any capacity for AC's complete with initial filling/charging of refrigerant gas to meet the requirement complete with vibration rubber pads four no's each nut, bolts etc and testing on full load all as specified and directed by Engr-in-charge. (Spare parts shall be measured and paid separately under respective items).\nNote: - "Contractor shall be responsible for all replacement of failed compressor and shall be accompanied by certificate from the original compressor to the effect that said compressor has been repaired at their authorised service centre. Further, a warranty of 12 months shall be provided on such replacement in writing." 41 Each Job
133 131 Supply only sealed compressor unit seamless welding company manufacturer with filling of refrigerant gas conforming to ISI as under: -
134 131.01 For refrigerator 165/286 Ltr capacity 5 Each
135 131.02 For refrigerator 290/320 Ltr capacity 10 Each
136 131.03 For Deep Freezer 100/200 Ltr capacity 3 Each
137 131.04 For Deep Freezer 300/400 Ltr capacity 8 Each
138 131.05 For Water cooler 40/80 Ltr capacity 4 Each
139 131.06 For Water cooler 60/120 Ltr capacity 6 Each
140 131.07 Split/Window AC 1.5 Ton Capacity 5 Each
141 132 Supply and fixing in replacement of unsv/burnt condensing fan motor 1/35 HP single phase 230 volt 50 Hz complete with blade, fan belts for water cooler of capacity 40/80 Ltr and 60/120 ltr complete all as specified and as directed. 6 Each
142 133 Supply only condensing fan motor 1/5 HP 1440 rpm single phase 230 Volt 50 HZ with double blade and shaft end with fan belts for windows AC/Split AC conforming to ISI of capacity 1.5/2.0 ton complete with vibration parts etc complete all as specified and as directed. 6 Each
143 134 Supply and charging refrigerant 134a/R-22 in sealed compressor unit of refrigerator/deep freezer/water coolers/AC's of any type and capacity after flushing the complete system with carbon tetrachloride (CTC) and vacuumise the complete system with vacuum pump and testing on full load including replacement of filter, strainer all as specified and directed. 40 Each Job
144 135 Supply and fixing in replacement of fallowing spare parts for refrigerator/deep freezer/water coolers/AC's of any capacity: -
145 135.01 Starting relay 15 Each
146 135.02 Overload protector 15 Each
147 135.03 Thermostat switch 15 Each
148 135.04 Defroz switch 10 Each
149 136 Supply and fixing in replacement of following unsv spare parts of water cooler of any capacity: -
150 136.01 Starting capacitor 45 mfd 6 Each
151 136.02 Running capacitor 60/120 mfd 8 Each
152 136.03 Float valve PVC 15 mm dia with ball 5 Each
153 136.04 Push cock chromium plated 15 mm with nipple 6'' long 5 Each
154 136.05 Drain/Wash out flexible down pipe 40 mm dia 6 Each
155 136.06 Water tank door gasket 6 Each
156 136.07 Water drain tray of suitable size 3 Each
157 137 Supply and fixing in replacement of unsv following spare parts of window/Split AC unit of capacity 1.5 to 2.0 ton: -
158 137.01 Starting capacitor 36/40 mfd 5 Each
159 137.02 Running capacitor 100/120 mfd 5 Each
160 137.03 PCB of Split AC 3 Each
161 137.04 Front Grill cover for window AC 1.5 Ton 3 Each
162 137.05 On/Off selector switch for window AC 5 Each
163 137.06 Condensing fan motor double shaft 5 Each
164 138 M&L for repair to Automatic voltage stabilizer with rewinding of coils and replacement of UNSV/burnt spare parts relay, volt/amp meter On/Off selector switch, Auto cut timer switch indicators, repair to PCB, socket outlet 6 pin 3 in 1,15 Amp, plug top 5/15 Amp all as specified of capacity 0.5 to 5 KVA complete including testing all as directed.\nNote: - Winding will be paid separately. 16 Each Job
165 139 Supply and fixing in replacement of PVC flexible braided pipe of 20 mm dia for split AC water drain out all as specified and directed. 62 RM
166 140 Supply and fixing in replacement of outer split AC condensing unit complete for split AC 1.5 ton all as specified and directed. 4 Each
167 141 Supply and fixing in replacement of inner unit of split AC complete with filters, blower motor etc for Split AC 1.5 ton complete with all accessories all as specified and directed. 4 Each
168 142 Supply and fixing in replacement of copper capillary tubing 5/8'' for AC connection/repair complete all as specified and directed. 63 RM
169 143 Supply and fixing in replacement of condensing unit of Refrigerator/Deep Freezer/Water Cooler of any capacity complete with cutting and brazzing work all as specified and directed. 4 Each
170 144 Supply and fixing magnetic door gasket of refrigerator 165 to 310 Ltrs capacity complete all as specified and as directed. 5 Each
171 145 Supply and replace freezer compartment (Chiller Unit) with dooe/cover of refrigerator 165 to 310 Ltrs capacity of any make complete all as specified and directed. 5 Each
172 146 Supply and fix chiller tray of approved quality/brand suitable up to 310 Lrs capcity of any make complete all as spcified and directed. 5 Each
173 147 Supply and fix vegetable/fruit basket with lid of approved quality / brand suitable upto 310 Ltrs capacity of any make complete all as specified and directed. 5 Each
174 148 M&L for preparation of old steel surface by using wire brush/emery paper etc and make the surface smooth and paint to the outer cover/external surface of water cooler with two coats of synthetic enamel paint and re-writing the MES NO etc to water cooler of any capacity complete all as specified and directed. 10 Each
175 149 M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. \nNote : Wiring shall be done in proper colour coding. 270 RM
176 150 S&F sheet metal enclosure with 3 pin earth plug and socket complete with single pole MCB of 32 Amps, 240 volts single phase all as specified and directed. 15 Each
177 151 Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one 10 sqmm twin core stranded conductor cable flat or circular complete all as specified and as directed. 450 Rm
178 152 Supply and installation for replacement of automatic voltage stabilizer with back boost relay working range 90 to 290 Volt at 230 Vot of capacity 5 KVA complete all as specified and as directed. 8 Each
179 153 Supply and installation for replacement of automatic voltage stabilizer with back boost relay working range 90 to 290 Volt at 230 Volt of capacity 3 KVA complete all as specified and as directed. 6 Each
180 154 Supply and installation for replacement of automatic voltage stabilizer with back boost relay working range 90 to 290 Volt at 230 Volt of capacity 2 KVA complete all as specified and as directed. 4 Each
181 155 Supply and installation for replacement of automatic voltage stabilizer with back boost relay working range 90 to 290 Volt at 230 Volt of capacity 1 KVA complete all as specified and as directed. 3 Each
182 156 Taking down and strip opening to geyser of any make and cap 25/35/50 ltrs including disconnection of all water pipe connection and taking out water inlet/ outlet assly, removing glass wool, the inner tank, descaling the assembly and tank, detecting the leakage, welding / brazing the defected part, repacking the glass wool and refixing the same after making it funcional including replacement of worn out nuts, bolts, washer etc complete all as specified and directed. \nNote: Cost of material and labour for providing new items shall be measured under relevant items of sch 'A'. 350 Each
183 157 M&L for replacement of water inlet and outlet geyser assembly of existing make as required at site with rubber gasket suitable for geyser of 25/35 ltrs capacity electric driven water storage heater with provn of housing for thermostat assembly, heating element fixing arrangement nuts, bolts and washers etc. complete all as specified and directed. 200 Each
184 158 M&L for replacement of water inlet and outlet assembly of existing make as required at site with rubber gasket suitable for geyser of 50 ltrs capacity electric driven water storage heater with provn of housing for thermostat assembly, heating element fixing arrangement nuts, bolts and washers etc. complete all as specified and directed. 50 Each
185 159 M&L for replacement of geyser internal assembly (flanged) comprising complete with heating element and thermostat housing complete all as specified as per site requirement and suitable with the existing assembly suitable to 25/50 ltrs capacity complete all as specified and as directed. 20 Each
186 160 M&L for replacement thermostat capillary type switch for electric water heater storage type of cap 25/ 50 ltr, 230 volts of existing make of geyser complete all as specified and as directed. 20 Each
187 161 M&L for replacement thermostat, switch electric water heater storage type of cap 25/ 50 ltr, 230 volts of existing make of geyser complete all as specified and as directed. 200 Each
188 162 M&L for replacement heating element with triangular base/round base, single phase, 230 volt, cap 2 KW of existing make complete all as specified and as directed. 60 Each
189 163 M&L for replacement heating element with triangular/round base, single phase, 230 volt, cap 1.5 KW of existing make complete all as specified and as directed. 150 Each
190 164 M&L for replacement pressure release valve conforming to relevant IS 15mm bore suitable for fixing with GI pipe/tubing 15mm bore complete all as specified and directed. 60 Each
191 165 M&L for replacement of heavy duty PVC connection (For Hot Water) nylon threaded 450mm large (18”) 15mm bore including brass nuts, rubber washers complete on both ends complete all as specified and as directed. 100 Each
192 166 All as per Ser Item No 165.00 here-in-before but for cold water complete all as specified and as directed. 100 Each
193 167 M&L for replacement of indicator lamps round/rectangular type 230 volt AC suitable for geyser of any capacity including providing electric connections complete all as specified and as directed. 30 Each
194 168 S&F in replacement of UNSV Geyser with metal body water heater storage type (Geyser) 25 Ltr capacity, confirming to ISI, single phase with working voltage 240 Volts, 50 Hz complete all as specified and directed. 15 Each
195 169 M&L for replacement water storage inner tank of stainless steel heavy duty confirms to ISI 25/35 ltrs capacity geyser, with provn for fixing 15mm dia galvanized air release valve all as specified and directed. 20 Each
196 170 M&L for replacement water storage inner tank of stainless steel heavy duty confirms to ISI 50 ltrs capacity geyser, with provn for fixing 15mm dia galvanized air release valve all as specified and directed. 10 Each
197 171 Material and labour for painting of geyser of cap 25/35/50 ltr complete with superior quality synthetic enamel white paint by spray painting after scrapping old paint and making surface clean all as specified and directed. 60 Each
198 172 Material and labour for replacement Non Return valve 15 mm dia complete all as specified and directed. 20 Each
199 173 Material and labour for replacement split bottom cover (two pieces) suitable for 25 to 50 lts Geysers complete with fixing arrangement etc as required at site complete all as specified and as directed. 10 Each Set
200 174 Material and labour for replacement rubber Gasket heavy duty of water inlet outlet assembly suitable for 25 ltrs capacity Geyser complete all as specified and as directed. 20 Each
201 175 Material and labour for replacement outer shell suitable for 25/35 ltr geyser made out of GI sheet heavy duly confirming to ISI suitable for existing make of geyser complete factory manufactured painted complete all as specified and as directed. 10 Each
202 176 Material and labour for replacement outer shell suitable for 50 ltr geyser made out of GI sheet heavy duly confirming to ISI suitable for existing make of geyser complete factory manufactured painted complete all as specified and as directed. 10 Each
203 177 S&F in replacement glass wool suitable for geysers complete all as specified and as directed. 15 Each
204 178 Repair/maintenance/servicing to solar water heater system having a capacity 100 to 500 LPD complete with descaling/cleaning to flat plate collector plate, solar heater water tanks, toughened solar glass panels, welding/breazing to solar tanks, Repair/rectification of leakage in inlet/outlet water tubing GI, checking and repair to electric system, Repair of water make up tank and make the system function cable after repair/servicing and rectification of the fault complete with and including repacement of minor spare parts complete all as specified and as directed.\n(Note: - Spare shall be measured and paid separately). 12 Each
205 178.01 Supply only union medium grade 25 mm dia 10 Each
206 178.02 Supply only union medium grade 20 mm dia 10 Each
207 178.03 Supply only Rubber hose pipe with MS clamp of suitable size\n 10 RM
208 178.04 Supply only Gun metal gate/glove valve 20 mm dia\n 12 Each
209 178.05 Supply only Rubber gasket of toughened glass\n 2 Each
210 178.06 Supply only Painting to steel structure base frame\n 5 Each Job
211 178.07 Supply only float valve PVC 20 mm dia 10 Each
212 179 Material and labour for replacement of Electrical heating element long threaded type, as per existing 3 KW, ISI marked, single phase suitable for solar water heater complete all as specified and directed. 8 Each
213 180 M&L for replacement of thermostate, long body, ISI marked of solar water heater of capacity 100 to 500 LPD complete all as specified and as directed. 8 Each
214 181 M&L for replacement of Solar hot water tank with thermal insulation suitable for solar water heater of capacity 100 LPD complete all as specified and as directed. 1 Each
215 182 M&L for replacement of Solar hot water tank with thermal insulation suitable for solar water heater of cap 500 LPD complete all as specified and as directed. 1 Each
216 183 M&L for replacement of toughened collector glass of size 1.5M x 1.0 Mtr complete all as specified and directed confirming to ISI. 6 Each
217 184 M&L for fasteners 80-100 mm long for fixing of geyser of capacity up to 50 ltrs including grouting completed works in wall as per site requirement with the floor complete all as specified and directed. 50 Each
218 185 S&F in replacement chromium plated CP Bib cock 15 mm Dia Conforming to ISI complete all as specified and as directed. 20 Each
219 186 S&F in replacement Gun metal glove/gate valve 15 mm Dia internal threaded with iron wheel head conforming to ISI complete all as specified and as directed. 10 Each
220 187 M&L for replacement of hot water pipe insulation with glass wool and aluminium cladding 20mm bore including all materials as required and directed by Engr-in-charge. 20 RM
221 188 S&F sheet metal enclosure for MCB DB SPN 240 Volts, 2 way single door without bus bar, enclosure made up of CRCA sheet IP 30 including wooden rectangular board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-Charge. 9 Each
222 189 M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqrmm for phase and neutral and one run of 2.5 Sqrmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn in but including non metallic rigid PVC concealed conduit of 25 mm dia fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. \nNote : Wiring shall be done in proper colour coding. 260 RM
223 190 M&L for replacement of tubing GI "medium grade" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 15 mm dia complete all as specified and directed. 32 RM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail