}

Construction And Repairing Cc Road , Drain And Cross Work At Various Places In W . No . 03 , Ajmer . , Ajmer-Rajasthan

Department Of Local Bodies has published Construction And Repairing Cc Road , Drain And Cross Work At Various Places In W . No . 03 , Ajmer . . Submission Date for this Tender is 29-06-2021. Drainage Tenders in Ajmer Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

28165284
Corrigendum : Construction And Repairing Cc Road , Drain And Cross Work At Various Places In W . No . 03 , Ajmer .
Open Tender
Indian
Rajasthan
Ajmer
29-06-2021

Tender Details

Construction And Repairing Cc Road , Drain And Cross Work At Various Places In W . No . 03 , Ajmer .

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 18-Jun-2021 Corrigenduum1 Date 29-06-2021

Key Value

Document Fees
INR 500 /-
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work :- okMZ ua- 03 esa fofHkUu LFkkuks ij lh0lh0 lM+d o ukyh@ØkWl fuekZ.k@ejEer dk;ZA
Sl. No. Item Description Item Code / Make Quantity Units
1 2 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m 81.25 Cum
2 3 Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301. In all type of soil 116.25 Cum
3 4 Carriage of Materials by mechanical transport including loading, unloading and stacking : Earth 6 KM 197.5 Cum
4 5 Providing and laying lean cement concrete 1:4:8 in Sub-base opver a prepared sub-grade with coarse and fine aggregate conforming to IS : 383, the size of coarse aggregate not exceeding 25mm, aggregate cement ration not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in concrete mixer, laid manualy compacted with surface vibrator finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 97.25 Cum
5 6 centering and shuttering with plywood or steel up to two storey or height uo to 7.5 mtr above plinth level including strutting ,proping, etc. and removal formwork for:foundation etc. 85 Sqm
6 7 Providing and laying un-reinforced, plain cement concrete mix with concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to IS : 383, maximum size of coarse aggregate not exceeding 25mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints etc including all material labour, machinery, lighting, guarding and maintenance of diversion. :- PCC M-20 77.5 Cum
7 8 Providing and laying of position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 ( 1cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) 36 Cum
8 9 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush .white sand stone 157.5 Sqm
9 10 Providing and laying TMT bar reinforcement at any level in foundation/ pile/ pile cap complete as per drawing and clause 1600 of MoRT&H Specification including all material, labour and machinery. Reinforcement with TMT bar in sub structure 0.6 Tonne
10 11 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. n gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 318 Kg
11 12 P/F of Reinforced Ferro Cement Drain cover designed for Class 'AA' loading duly marked on cover with adequate steel reinforcement having thickness 75 mm to 150 mm anti - corrosive bitumen painted M.S. plate rim and on M.S. lifting hook admixture like plasticizer bond improving compound abrasion resistant complete per approved design etc.
12 12.1 Standard Size 600x800mm (75mm thick) for span 300 to 450mm A.- size 600 X 800 mm 4.32 Sqm
13 12.2 Standard Size 1000x800mm (100mm thick) for span 451 to 700mm A.- size 1000 X 800 mm 6.4 Sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail