Department Of Local Bodies has published Construction And Renovation Work And Cc Road At Atal Udhyan In W . No . 64 , Ajmer . . Submission Date for this Tender is 29-06-2021. Road Work Tenders in Ajmer Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Jun-2021 | Corrigendum1 | Date | 29-06-2021 |
| Name of Work :- okMZ ua- 64 es vVy m/kku esa fjuksos'ku dk;Z o lh0lh0 lM+d fuekZ.k dk;ZA | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 2 | Part A Building | |||
| 2 | 3 | Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301.\nIn all type of soil | 168 | Cum | |
| 3 | 4 | Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m | 8.25 | Cum | |
| 4 | 5 | Carriage of Materials by mechanical transport including loading, unloading and stacking : Earth 6 KM | 176.25 | Cum | |
| 5 | 6 | Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material,\nlabour, machinery, lighting, guarding and maintenance of diversion | 91 | Cum | |
| 6 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth\nlevel : 1:5:10 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size) | 1.061 | Cum | |
| 7 | 8 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : 22.1.1 Foundations, footings, bases of columns, etc. for mass concrete | 9.555 | Sqm | |
| 8 | 9 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | 1.285 | Cum | |
| 9 | 10 | Providing and laying of position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 ( 1cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) | 28 | Cum | |
| 10 | 11 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | 5.27 | Sqm | |
| 11 | 12 | Precast terrazo tiles 22mm thick with graded marble chips of size upto 12mm laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : | 5.27 | Sqm | |
| 12 | 13 | Providing and fixing of 60mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having minimun compressive strength of 300 kg/ sq cm. The CC paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. | 420 | Sqm | |
| 13 | 14 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment. | 210 | Sqm | |
| 14 | 15 | Random rubble stone masonry with hard stone in foundation and plinth | 2.74 | Cum | |
| 15 | 16 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) | 7.89 | Cum | |
| 16 | 17 | cement plaster including T & P , scaffolding ,meterial and complete labour, including cost of water ,curing racking of joints ect. With 12 mm cement plaster of mix. (1 cement : 4 fine /coarse sand) | 69.89 | Sqm | |
| 17 | 18 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | 69.89 | Sqm | |
| 18 | 19 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade | 69.89 | Sqm | |
| 19 | 20 | Providing and laying TMT bar reinforcement at any level in foundation/ pile/ pile cap complete as per drawing and clause 1600 of MoRT&H Specification including all material, labour and machinery. | 0.5 | Tonne | |
| 20 | 21 | Random rubble dry stone Kharanja (soling) under floor. | 1.21 | Cum | |
| 21 | 22 | Kota stone slab flooring 25mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) | 5.27 | Sqm | |
| 22 | 23 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. | |||
| 23 | 23.1 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 55 | Kg | |
| 24 | 24 | steel work welded in built up section / framed work including cutting .hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel ect.as required.n grating,frames,guard bar,ladder,railings,brackets,gates and similar works. | 202 | Kg | |
| 25 | 25 | Part B Sanitary | |||
| 26 | 26 | Providing and fixing closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap , 10 litre low level white P.V.C flushing cistern with manually controlled devices (handle lever ) conforming to IS : 7231 , with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C pan of size 580x440mm with integral type foot rests | 2 | Each | |
| 27 | 27 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous china wash basin size 630 X 450 mm with a pair of 15 mm C.P. brass pillar taps. | 2 | Each | |
| 28 | 28 | Providing and fixing 600 X 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 2 | Sqm | |
| 29 | 29 | Providing and Fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. internal work-exposed on wall 15mm diameter nominal bore. | 10 | Per R/Mtr. | |
| 30 | 30 | Providing and Fixing C.P. brass long nose bib cock of approved quality confirming to IS standard and weighting not less than 690gms. 15mm nominal | 2 | Per Nos. | |
| 31 | 31 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. :- 10 litre capacity - coloured | 2 | Each | |
| 32 | 32 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. | 2 | Each | |
| 33 | 33 | P & F PVC Storage Tank (IS : 12701marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity. | 2 | Each | |
| 34 | 34 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15mm nominal bore. | 2 | Each | |
| 35 | 35 | Wiring of light point/fan point/ exhaust fan point/call bell point with 1.5sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS 694) of approved make in surface/recessed ISI marked medium duty PVC conduit & its accessories, round tiles, 18 SWG MS box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point. 6A switch, 3.0mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections, testing etc as required. | |||
| 36 | 35.1 | Short Point (up to 3 Mtr.) | 2 | Each | |
| 37 | 35.2 | Medium point (up to 6 Mtr.) | 2 | Each | |
| 38 | 35.3 | Long Point (up to 10 Mtr.) | 2 | Each | |
| 39 | 36 | Wiring of twin control light point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS 694) of approved make in surface/recessed ISI marked medium duty PVC conduit & its accessories, round tles, 18 SWG M.S box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point 6 A two way switch, 3.0 mm thick phenolic laminated sheet, zinc plated/brass screws, cup washers, making connections, testing etc as required. - On Board Gr. - I | 2 | P.Point | |
| 40 | 36.1 | Short point (up to 3 mtr.) | 2 | P.Point | |
| 41 | 36.2 | Medium point (up to 6 mtr.) | 2 | P.Point | |
| 42 | 36.3 | Long point (up to 10 mtr..) | 2 | P.Point | |
| 43 | 37 | P&F industrial fluorescent tube fitting with reflector fabricated from CRCA sheet and finished with powder coating/vitreous enamelled complete with accessories like (OCCB, starter, seat)/EB, condenser, rotor holder, terminal block duly prewired with copper conductor including making connection, testing etc, as required, (without tube) with powder coated reflector 2X36 Watts with OCCB. | 2 | Each | |
| 44 | 38 | SITC of quick make and quick break 3 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415V, 50 Hz ; O/L & S/C setting and conforming to IS 13947-2/IEC 60947-2 with front face and centralized adjustable, line load interchange ability having positive isolation capacity, provision for UVR, shunt trip, earth fault trip, push (test) to trip, including making connections with lugs/ spreaders etc as required with Thermal Magnetic release up to 100 Amp, 10 kA, fixid O/L and S/C settings. | 2 | Each | |
| 45 | 39 | P&F fluorescent tube rod in existing fixtures as required 36/40 Watts. | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
