}

Annual Repair And Maintenance Of Non Residential Govt. Building During The Year 2020 21Sh Mtc. Of Different Rooms, Toilet Blocks Including Sanitary And Water Supply Works At Adwaita Malla Athitishala, Agartala, AGARTALA-Tripura

Public Works Department-PWD has published Annual Repair And Maintenance Of Non Residential Govt. Building During The Year 2020 21Sh Mtc. Of Different Rooms, Toilet Blocks Including Sanitary And Water Supply Works At Adwaita Malla Athitishala, Agartala. Submission Date for this Tender is 01-07-2021. Building Work Tenders in AGARTALA Tripura. Bidders can get complete Tender details and download the document.




Tender Notice

28162610
Annual Repair And Maintenance Of Non Residential Govt. Building During The Year 2020 21Sh Mtc. Of Different Rooms, Toilet Blocks Including Sanitary And Water Supply Works At Adwaita Malla Athitishala, Agartala
Open Tender
Indian
Tripura
AGARTALA
01-07-2021

Tender Details

Annual Repair And Maintenance Of Non Residential Govt. Building During The Year 2020 21Sh Mtc. Of Different Rooms, Toilet Blocks Including Sanitary And Water Supply Works At Adwaita Malla Athitishala, Agartala

Key Value

Document Fees
INR 1000 /-
EMD
INR 7452.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: A/R & M/O non-residential Govt. building during the year 2020-21/SH:-Mtc. of different rooms,toilet blocks including sanitary and water supply works at Adwaita Malla Athitishala,Agartala.
Sl. No. Item Description
1Earth work in excavation by mechanical means(Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.a) All kinds of soil
2Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - -All work upto plinth level: 1:3:6 ( 1 Cement: 3 fine sand : 6 gradedwell burnt brick aggregate 20mm nominal size)
4Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-- -All work upto plinth level 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size)
5Centering shuttering including struttings, propping etc.and removal of form work for: Foundations, footings, bases for columns etc. for mass concrete with timber plank
6Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars
7First class brick work in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand)
8Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required completeIn cement mortar 1:4 ( 1 cement : 4 fine sand ).
9First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required completeIn cement mortar 1:4 ( 1 cement : 4 fine sand )
10Extra for brick masonry work in triangular, square and rectangular pillars including cost of all materials as required complete
11Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing ,curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels18 mm thick Granite of any colour and shade duly approved:-Area of slab over 0.50 sqm.
12Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished /black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and orglazing as per direction of Engineer-In-Charge. Gamair Wood / 30 mm thick shutters
13Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
14Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc.required colour or shade with necessary screws etc. 200x10 mm
15Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm
16Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
17Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to openings /wooden frames with rawl plugs screws etc.Fixed to openings in walls with rawl plugs, screws etc.
18Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mmthick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-incharge,cover moulding shall be provided for covering fixing screws and elegant look.( for W.C.bathroom door shutter).
19Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws.
20Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete20 mm dia
21Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. Complete 250 mm weighing not less than 150 gms
22Providing and fixing in position collapsible steel shutterswith vertical channels 20x10x2mm at 100 mm centre tocentre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.
23Providing and fixing 1mm thick M.S. sheet door withframe of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required Using M.S. angels 40x40x6 mm for diagonal braces
24Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. completeHot finished welded type tubes
25Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
26Providing and laying ceramic floor tiles in different sizes(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approvedmake in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1cement : 4 fine sand), Jointing with grey cement slurry @3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. Anti-Skid TilesCeramic Tiles 1st quality 300 x 300mm in all shades and designs
27Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 finesand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-in-Charge
28Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Single socketed pipe - 110 mm OD
29Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type-A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansionBend 87.5° / 110mm
30Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in550mpa steel grade, made out of Cold Rolled Steelcoated with Zinc-Aluminium alloy coating of 43.5% Zn,55% Al and 1.5% Silicon confirming to ASTMA792/A792M and AS1397, Alloy coating AZ150/AZ70,colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard filmof 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto anypitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.45mm thickness
3112 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. Cement mortar 1:4 ( 1 cement : 4 fine sand)
326 mm cement plaster of mix : In cement mortar 1 : 3 ( 1 cement : 3 fine sand )
33Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work
34Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
35Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work ( two or more coats) over and including water thinnable priming coat with cement primer
36Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the ManufacturerNew work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
37Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
38Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete
39Painting with synthetic enamel paint ( one or morecoats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required completeas per direction of the Engineer in charge
40Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete. Water thinnable cement primer
41Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge
42Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge
43Painting with synthetic enamel paint ( one or morecoats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge
44Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering orre-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge
45Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm
46Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever requiredW.C. pan with ISI marked white solid plastic seat and lid
47Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
48Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of430x260x350mm and 340x410x265mm sizes respectively.
49Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete40 mm dia
50Providing and fixing Stainless Steel AISI 304 (18/8)kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever requiredKitchen sink without drain board 610x510 mm bowl depth 200 mm.
51Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity-White
52Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
53Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete
54Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall20 mm nominal outer dia .Pipes.
5525 mm nominal outer dia .Pipes.
5640 mm nominal outer dia .Pipes
57Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore
58Providing and fixing C.P. brass stop cock (concealed)of standard design and of approved make conforming to IS:8931.15 mm nominal bore.
59Cutting holes upto 30x30 cm in walls including making good the sameWith 1st class bricks
60Providing and applying super latex (SBR based) or equivalent waterproofing coating over RCC slab / Brickwork with 3 components by mixing super latex or equivalent , water, cement @ 1:4:7 or as per manufacturer recommendation in/c cleaning the roof surface with weir brushing and with clean water before application and curing the chemical by sprikling water for 3-5 days after application of waterproofing compund complete a per direction of the E-in-C and technical in struction.
61Shifting of existing office almirahs(in/c packed official documents,files etc.)or other official materials from one place to another place for mtc. of a room & placing the same in the original position after mtc. properly without any damage as per direction of the Eng-in-charge
62Labour charge for washing GI pipe internal for removing iron deposited iron etc. in/c. replacement of the pipe from original positionas per direction of Eng.-in –Charge
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail