Chandigarh Administration Engineering Department has published Renovation Of Existing Hostel Toilets Of Aravali Block B At P . E . C Sector 12 , Chandigarh. Submission Date for this Tender is 18-06-2021. Toilet Bathroom Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.
Name of Work: Renovation of Existing Hostel Toilets of Aravali Block B at P.E.C Sector 12, Chandigarh | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : | |||
2 | 2 | All kinds of soil | |||
3 | 3 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | 181.05 | metre | |
4 | 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 6.74 | cum | |
5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||
6 | 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). | 0.97 | cum | |
7 | 7 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). | 1.08 | cum | |
8 | 8 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources). | 5.05 | cum | |
9 | 9 | Providing and laying cement concrete in retaining\r walls, return walls, walls (any thickness) including\r attached pilasters, columns, piers, abutments,\r pillars, posts, struts, buttresses, string or lacing\r courses, parapets, coping, bed blocks, anchor\r blocks, plain window sills, fillets, sunken floor\r etc., up to floor five level, excluding the cost of\r centering, shuttering and finishing : | |||
10 | 10 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources). | 5.66 | cum | |
11 | 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). | 22.35 | cum | |
12 | 12 | Centering and shuttering including strutting, propping etc. and removal of form for | |||
13 | 13 | Suspended floors, roofs, landings, balconies and access platform | 142.48 | sqm | |
14 | 14 | Shelves (Cast in situ) | 10.04 | sqm | |
15 | 15 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | 80.53 | sqm | |
16 | 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. | |||
17 | 17 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | 3217.19 | kg | |
18 | 18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | |||
19 | 19 | Cement mortar 1:4 (1 cement : 4 coarse sand) | 8.5 | cum | |
20 | 20 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. | |||
21 | 21 | Cement mortar 1:4 (1 cement :4 coarse sand) | 71.2 | sqm | |
22 | 22 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | 71.2 | sqm | |
23 | 23 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. | |||
24 | 24 | Granite of any colour and shade | |||
25 | 25 | Area of slab over 0.50 sqm | 20.66 | sqm | |
26 | 26 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | |||
27 | 27 | Granite work | 27.43 | metre | |
28 | 28 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. | 18 | each | |
29 | 29 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). | 24.77 | sqm | |
30 | 30 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | |||
31 | 31 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 39.52 | sqm | |
32 | 32 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | 27.43 | sqm | |
33 | 33 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : | |||
34 | 34 | 200x10 mm | 18 | each | |
35 | 35 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | 18 | each | |
36 | 36 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. | |||
37 | 37 | 1.0 mm thick | 58.78 | sqm | |
38 | 38 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. | |||
39 | 39 | 125 mm | 36 | each | |
40 | 40 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: | |||
41 | 41 | Profile B | |||
42 | 42 | Fixing with adjustable lugs with split end tail to each jamb | 87.78 | metre | |
43 | 43 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. | |||
44 | 44 | Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | 255.51 | sqm | |
45 | 45 | Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : | |||
46 | 46 | GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. | 88.43 | sqm | |
47 | 47 | 12 mm cement plaster of mix : | |||
48 | 48 | 1:4 (1 cement: 4 coarse sand) | 151.48 | sqm | |
49 | 49 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | |||
50 | 50 | Two or more coats on new work | 22.91 | sqm | |
51 | 51 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : | |||
52 | 52 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 21.57 | sqm | |
53 | 53 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | |||
54 | 54 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | 16.97 | cum | |
55 | 55 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 11.32 | cum | |
56 | 56 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. | 11.32 | sqm | |
57 | 57 | Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. | 254.55 | kg | |
58 | 58 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | |||
59 | 59 | In cement mortar | 24.4 | cum | |
60 | 60 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : | |||
61 | 61 | Of area 3 sq. metres and below | 108 | each | |
62 | 62 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. | |||
63 | 63 | For thickness of tiles 10 mm to 25 mm | 715.96 | sqm | |
64 | 64 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : | |||
65 | 65 | UP TO 100 mm dia pipe (80% of new work ), i.e., 80 % of (322.79+310.90) item no. 38 | 506.95 | metre | |
66 | 66 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : | |||
67 | 67 | 15 mm to 40 mm nominal bore ( 80 % of collective of item no. 46 (800 + 150 = 950) | 760 | metre | |
68 | 68 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 146.95 | sqm | |
69 | 69 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | 18 | each | |
70 | 70 | Providing and fixing soil, waste and vent pipes : | |||
71 | 71 | 100 mm dia | |||
72 | 72 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | 322.79 | metre | |
73 | 73 | 75 mm diameter : | |||
74 | 74 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 | 310.9 | metre | |
75 | 75 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. | |||
76 | 76 | 100 mm dia | |||
77 | 77 | Sand cast iron S&S as per IS - 3989 | 12 | each | |
78 | 78 | 75 mm dia | |||
79 | 79 | Sand cast iron S&S as per IS- 3989 | 36 | each | |
80 | 80 | Providing and fixing heel rest sanitary bend | |||
81 | 81 | 100 mm dia | |||
82 | 82 | Sand cast iron S&S as per IS - 3989 | 6 | each | |
83 | 83 | 75 mm dia | |||
84 | 84 | Sand cast iron S&S as per IS - 3989 | 12 | each | |
85 | 85 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. | |||
86 | 86 | 100x100x100 mm | |||
87 | 87 | Sand cast iron S&S as per IS - 3989 | 12 | each | |
88 | 88 | 75x75x75 mm | |||
89 | 89 | Sand cast iron S&S as per IS - 3989 | 24 | each | |
90 | 90 | Providing and fixing terminal guard : | |||
91 | 91 | 100 mm | |||
92 | 92 | Sand cast iron S&S as per IS - 3989 | 6 | each | |
93 | 93 | 75 mm | |||
94 | 94 | Sand cast iron S&S as per IS - 3989 | 12 | each | |
95 | 95 | Providing and fixing collar : | |||
96 | 96 | 100 mm | |||
97 | 97 | Sand cast iron S&S as per IS - 3989 | 36 | each | |
98 | 98 | 75 mm | |||
99 | 99 | Sand cast iron S&S as per IS - 3989 | 36 | each | |
100 | 100 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : | |||
101 | 101 | 100 mm | 40 | each | |
102 | 102 | 75 mm | 40 | each | |
103 | 103 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : | |||
104 | 104 | 100 mm inlet and 75 mm outlet | |||
105 | 105 | Sand cast iron S&S as per IS - 3989 | 18 | each | |
106 | 106 | Providing and fixing "C" Class G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall | |||
107 | 107 | 15 mm dia nominal bore | 150 | metre | |
108 | 108 | 20 mm dia nominal bore | 250 | metre | |
109 | 109 | 25 mm dia nominal bore | 300 | metre | |
110 | 110 | 40 mm dia nominal bore | 100 | metre | |
111 | 111 | Providing and fixing "C" Class G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : | |||
112 | 112 | 15 mm dia nominal bore | 60 | metre | |
113 | 113 | 20 mm dia nominal bore | 90 | metre | |
114 | 114 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : | |||
115 | 115 | 25 mm nominal bore | 18 | each | |
116 | 116 | 40 mm nominal bore | 6 | each | |
117 | 117 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : | |||
118 | 118 | 25 mm nominal bore | 12 | each | |
119 | 119 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. | 12000 | per litre | |
120 | 120 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. | 54 | each | |
121 | 121 | Cutting holes up to 30x30 cm in walls including making good the same: | |||
122 | 122 | With common burnt clay F.P.S. (non modular) bricks | 54 | each | |
123 | 123 | Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge. (The pipe length inserted in the fitting shall not be measured for payment) Inernal work - Exposed on wall | |||
124 | 124 | 15.88 mm outer dia pipe | 55 | metre | |
125 | 125 | 22.22 mm outer dia Pipe | 100 | metre | |
126 | 126 | 28.58 mm outer dia Pipe | 125 | metre | |
127 | 127 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Coupling/ Socket | |||
128 | 128 | For 15.88 mm outer dia pipe | 2 | each | |
129 | 129 | For 22.22 mm outer dia pipe | 3 | each | |
130 | 130 | For 28.58 mm outer dia pipe | 4 | each | |
131 | 131 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90° | |||
132 | 132 | For 15.88mm outer dia pipe | 4 | each | |
133 | 133 | For 22.22 mm outer dia pipe | 7 | each | |
134 | 134 | For 28.58 mm outer dia pipe | 8 | each | |
135 | 135 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Reducing Elbow 90° | |||
136 | 136 | For22.22 mm x 15.88 mm outer dia pipe | 3 | each | |
137 | 137 | For 28.58 mm x 22.22 mm outer dia pipe | 4 | each | |
138 | 138 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Equal Tee | |||
139 | 139 | For 15.88 mm outer dia pipe | 2 | each | |
140 | 140 | For 22.22 mm outer dia pipe | 3 | each | |
141 | 141 | For 28.58 mm outer dia pipe | 4 | each | |
142 | 142 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : | |||
143 | 143 | 100 mm diameter | 18.29 | metre | |
144 | 144 | 150 mm diameter | 36.58 | metre | |
145 | 145 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : | |||
146 | 146 | 100 mm diameter S.W. pipe | 18.29 | metre | |
147 | 147 | 150 mm diameter S.W. pipe | 36.58 | metre | |
148 | 148 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: | |||
149 | 149 | 100x100 mm size P type | |||
150 | 150 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 12 | each | |
151 | 151 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : | |||
152 | 152 | For pipes 100 to 250 mm diameter | 6 | each | |
153 | 153 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: | |||
154 | 154 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : | |||
155 | 155 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 6 | each | |
156 | 156 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||
157 | 157 | For fixed portion | |||
158 | 158 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | 605.7 | kg | |
159 | 159 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | |||
160 | 160 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | 715.62 | kg | |
161 | 161 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | |||
162 | 162 | Pre-laminated particle board with decorative lamination on both sides | 22.58 | sqm | |
163 | 163 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||
164 | 164 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 34.48 | sqm | |
165 | 165 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. | 132.78 | sqm | |
166 | 166 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. | |||
167 | 167 | Upto and including 12mm dia. | 1008 | each | |
168 | 168 | Providing and fixing 1st quality / ceramic / vitrified glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make of size 300x600 (Colour & design as approved bt Engineer-in-charge) in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 394.22 | sqmt | |
169 | 169 | Removing & Raking of cinder from dismantalled sunken slabs & stacking within a lead of 50 meters as per direction of Engineer - in - charge | 33.68 | cum | |
170 | 170 | Providing and fixing bright finished S.S. hanging type floor door stopper with necessary screws, etc. complete | 18 | each | |
171 | 171 | Providing and fixing ISI marked S.S. sliding door bolts with nuts and screws etc. complete : | 18 | Each | |
172 | 172 | Providing and fixing in position toilet front & side ( cubical as per drawing) panel comprising door with left right supporting panels made of heat, bacteria, water, chemical, scratch proof and impact resistant 12mm thick solid high pressure compact laminate panels of end, Mid & door conforming per IS 2046 of Greenlam/ Merino/ or equivalent including door pilasters & inetmediate panels finished with approved texture/ shade comprising assesories & handwares made out od Anodised Alluminium(Grade 6063- T6) & SS-304 Grade with Alluminium supporting system with following complete in all respect as per drawing. | 115.9 | sqmt | |
173 | 173 | Providing and fixing M.S. wire mesh of 1" x1" shed fixed on angle iron 40x40x3 mm including a gate having width 2.5' and height 6'-9'' made angle iron 30x30 3 mm with same jali and locking arrangement and handle as per site requirement as directed by EIC | 410.25 | sqmt | |
174 | 174 | Making chases up to 11.5x12.5 cm in walls for laying the cement concrete in existing walls etc. | 141.15 | Rmt | |
175 | 175 | Providing and Fixing superior quality mirror with bevelled edge (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 15.06 | sqmt | |
176 | 176 | P/F of chinaware wall mounted/wall hanging Eurpeon Style with soft close seat cover, hinges, accessories of approved colour with all other fittings make and size as approved by EIC. | 18 | Each | |
177 | 177 | P/F of counter wash basin with C.I. brackets without pillar taps including 32mm CP brass waste of standard pattren ,including painting of fittings and brackets cutting and making good the walls whereever require make as approved by EIC. | 18 | Each | |
178 | 178 | Providing and fixing CP Bottle Trap (with internal partition) 32mm size with wall connecton pipe & wall Flange complete in all respect as per Makes approved by EIC. | 18 | Each | |
179 | 179 | Providing and fixing Regular body of concealed stop cock suitable for 15mm pipe line with protection cap with exposed parts complete in all respect make as approved by EIC. | 36 | Each | |
180 | 180 | Providing and fixing of CP Connection with brass union 45cm length & 15 mm nominal bore. | 36 | Each | |
181 | 181 | Providing and fixing C.P. brass angle valve complete in all respect make as approved by EIC. | 36 | Each | |
182 | 182 | Providing and fixing C.P. brass toilet roll Holder complete in all respect make as approved by EIC. | 18 | Each | |
183 | 183 | Providing and fixing CP brass Bib cock with wall flange complete in all respect make as approved by EIC. | 36 | Each | |
184 | 184 | Providing & Fixing of CP brass divertor (4 way) with hot & cold concealed stop cock, with non return valves (composite one piece body) complete kit including cutting and making good the walls wherever required complete in all respect make as approved by EIC. | 18 | Each | |
185 | 185 | Providing and fixing Corner Glass shelf (with Bracket) complete in all respect make as approved by EIC. | 18 | Each | |
186 | 186 | Providing and Fixing of 32 mm C.P waste coupling size half thread complete in all respect make as approved by EIC. | 18 | Each | |
187 | 187 | Providing and fixing of Concealed Cistern (Flush Plates - Cento 100mm)(Size :- 38x44x10 cm) and wall mounted frame compatible with Rag bolt distance 180mm & 230 mm Cat No.511726 or equivalent as approved by EIC complete in all respect. | 18 | Each | |
188 | 188 | Providing and fixing CP Towel rail 600 mm complete in all respect make as approved by EIC. | 18 | Each | |
189 | 189 | Providing and fixing CP Brass Pressmatic Auto Close type Pillar Cock complete in all respect make as approved by EIC. | 18 | Each | |
190 | 190 | Providing and fixing of overhead shower 120mm Dia round shape single flow (ABS body type) chrome plated with Gray face plate & flow restrictor 6.0 LPM at 3 bar pressure, complete in all respect make as approved by EIC. | 18 | Each | |
191 | 191 | Providing and fixing of Standard Urinal size 37x39x60 cm colour snow white Pastel. complete in all respect make as approved by EIC. | 18 | Each | |
192 | 192 | Providing and fixing of CP Brass Bath Spout with wall flange make as approved by EIC. | 18 | each | |
193 | 193 | Providing and fixing Soap Dish Holder Make as approved by EIC. | 18 | Each | |
194 | 194 | Providing and fixing soap dispenser Make as approved by EIC complete in all respect. | 18 | Each | |
195 | 195 | Providing Drip Seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: | |||
196 | 196 | 100 mm | 36 | Each | |
197 | 197 | 75 mm | 132 | Each | |
198 | 198 | Providing & Fixing insulation for hot water pipeline with glass wool ( 48 kg/cum density) blankets mats of 25 mm thickness, wrapping of mats with polyethylene paper, chicken wire mesh and Aluminium cladding ( 26 G) sheet with self taping screw complete in all respects to entire satisfaction of Engineer - in - Charge. Make : - Loyed / Tereclien / A Flex / K Flex | |||
199 | 199 | 15.88 mm | 55 | metre | |
200 | 200 | 22.22 mm | 100 | metre | |
201 | 201 | 28.58 mm | 125 | metre | |
202 | 202 | Providing and driling core cutting in RCC slab for drainage pipe. | |||
203 | 203 | 75 mm dia | 36 | Each | |
204 | 204 | 100 mm dia | 12 | Each | |
205 | 205 | Providing and fixing 1 mm thick stainless steel grating with frame for floor traps or drains of required pattern including cutting and making good the floors complete | |||
206 | 206 | 100 x 100 mm | 36 | Each | |
207 | 207 | 125 x 125 mm | 18 | Each | |
208 | 208 | Providing & Fixing CP Cup Heavy Duty with all fittings complete in all respect to the entire satisfaction of Engineer - in - Charge. | 54 | Each | |
209 | 209 | Supplying and fixing vertical floor mounted water heating with capacity 300 liter single phase sutaible for 35º to 75º complete in all respect make as approved by EIC. | 8 | Each | |
210 | 210 | Providing and fixing Hydro Pneumatic Pump set 0.5 HP with required platform including electrical wire and switch complete in all respect. | 8 | each | |
211 | 211 | HCI Scrap/GI Scrap @ Rs.30 per kg PVC Scrap @ Rs.20 per kg Old wooden chowkhats @ Rs 250 each Old door/ Windows unusable @ Rs.150/- Pig lead Scrap @ Rs. 120/- per kg Brass Scrap @ Rs. 300/- per kg Old Bricks recovery @ 4/- each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail