Military Engineer Services-MES has published Special Repair To Bldg No T275 And Spl Repair To Bathing Pt ( Cherry ) Near Bldg No T936 , T436 , T939 And Spl Repair To Flooring Between Bldg No T177 To T179 And Tiling With Wall Panelling In Bldg No T180 ( Verandah Only ) And Certain Rev Work At . Submission Date for this Tender is 26-06-2021. Building Repair Tenders in LEIMAKHONG Manipur. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 19-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-06-2021 |
Name of Work: Spl repair to bldg no T-275 &Spl repair to bathing pt (cherry) near bldg no T-936,T-436,T-939 and Spl repair to flooring between bldg no T-177 to 179 and tiling with wall panelling in bldg no T-180(verendah only) and certain rev works at leimakhong mil stn. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | B/R work | |||
2 | 2 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed. | 36 | SQM | |
3 | 3 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. | 28.8 | CUM | |
4 | 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed. | 12 | CUM | |
5 | 5 | Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. | 16.8 | CUM | |
6 | 6 | M&L for Hardcore of broken stone or boulder of gauge exc. 63 mm but n.exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. | 4.4 | CUM | |
7 | 7 | M & L for PCC M-7.5 grade, (Nominal mix) using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed. | 7.2 | CUM | |
8 | 8 | M & L for PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in coping including necessary formwork complete all as specified and as directed. | 1.84 | CUM | |
9 | 9 | M & L for PCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in holdfast and similar articles including necessary formwork complete all as specified and as directed. | 0.3 | CUM | |
10 | 10 | M&L for PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed. | 3.1 | CUM | |
11 | 11 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. | 45.2 | CUM | |
12 | 12 | M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. | 65 | SQM | |
13 | 13 | Fair cutting straight or raking cutting n.exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc. including rubbed finish and waste complete all as specified and directed. | 18 | RM | |
14 | 14 | M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed. | 1.64 | CUM | |
15 | 15 | M&L for 2nd class hardwood Plain fillets.\nsquare, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc 13 Sqcm but n exc 25 Sqcm complete all as specified and directed | 30 | RM | |
16 | 16 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc. 1.5 sqm each and removing all unserviceable materials from site complete all as specified and directed. | 7 | EACH | |
17 | 17 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each and removing all unserviceable materials from site complete all as specified and directed. | 5 | EACH | |
18 | 18 | S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. | 0.12 | CUM | |
19 | 19 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification & drawing shown in section 8 SSR Part II complete all as specified and directed. | 48.3 | RM | |
20 | 20 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in section 8 SSR Part II complete all as specified and directed. | 17.48 | SQM | |
21 | 21 | M&L for 30mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed. | 4 | SQM | |
22 | 22 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. | 10 | SQM | |
23 | 23 | S&F mild steel butt hinges100mm long medium weight cold rolled complete all as specified and directed. | 45 | EACH | |
24 | 24 | S & F 150 mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed and fixed section barrel tower bolts complete all as specified and directed. | 6 | EACH | |
25 | 25 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. | 24 | EACH | |
26 | 26 | S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and directed. | 24 | EACH | |
27 | 27 | S&F 125mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. | 6 | EACH | |
28 | 28 | S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 150 mm overall lenth of cover plate complete all as specified and directed. | 5 | EACH | |
29 | 29 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. | 2.8 | SQM | |
30 | 30 | M&L for rolled mild steel work as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates etc. conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed. | 150 | KG | |
31 | 31 | M&L for rolled mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A .complete all as specified and as directed | 615 | KG | |
32 | 32 | M&L for rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410 W (Gde E-250) quality-A. complete all as specified and as directed | 258 | KG | |
33 | 33 | S & F Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 15cm and n.exc 30cm long & diameter of neck 12mm complete all as specified and as directed. | 5 | KG | |
34 | 34 | S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'J' type cranked hook bolt and washer in roof, wall etc. with grade of zinc coating 275 complete all as specified and directed. | 152 | SQM | |
35 | 35 | S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. | 15 | SQM | |
36 | 36 | M & L for 4mm thick plywood (no of ply 03), grade BWR, type BB fixed with nails to timber frame work on wall complete all as specified and directed. | 40 | SQM | |
37 | 37 | S&F 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work complete all as specified and directed | 36 | SQM | |
38 | 38 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x 600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. | 35 | SQM | |
39 | 39 | M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed. | 18 | SQM | |
40 | 40 | M&L for 75mm thick PCC M 7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed. | 162 | SQM | |
41 | 41 | M&L for 50mm thick PCC M 10 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed. | 12 | SQM | |
42 | 42 | M&L 25mm thick PCC M 15 using 12.5mm graded crushed stone aggregateas in floor, finishes even and rough to receive floor tiles complete all as specified and directed. | 287 | SQM | |
43 | 43 | M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed. | 187 | SQM | |
44 | 44 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.(Note: Screed bed will be measured & paid seperately) | 150 | SQM | |
45 | 45 | M&L for 20mm thick marble tiles, white, machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry including cutting and polishing complete all as specified and directed. | 10 | SQM | |
46 | 46 | M&L for Granite (of any type) tiles 20mm\nthick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. | 4 | SQM | |
47 | 47 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed. | 121 | SQM | |
48 | 48 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) complete all as specified and directed. | 32.75 | SQM | |
49 | 49 | S&F Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in cement mortar (1:4) complete all as specified and directed. | 131 | SQM | |
50 | 50 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exc. 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | 50 | SQM | |
51 | 51 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | 87 | SQM | |
52 | 52 | M&L for Vitrified Ceramic tiles, dark shade, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | 50 | SQM | |
53 | 53 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as directed. | 45 | SQM | |
54 | 54 | M&L for rendering 15mm thick on fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand)\n[Note: WPC will be measured and paid separately)\n | 168 | SQM | |
55 | 55 | M&L for rendering 15mm thick on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand)\n[Note: WPC will be measured and paid separately)\n | 69 | SQM | |
56 | 56 | M & L for rendering 15mm thick plaster in cement mortar (1:6) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand) | 35 | SQM | |
57 | 57 | Supply only Integral water proofing Compound ISI marked. | 61.42 | KG | |
58 | 58 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed. | 149 | SQM | |
59 | 59 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed. | 35 | SQM | |
60 | 60 | M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 192.7 | SQM | |
61 | 61 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 54 | SQM | |
62 | 62 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. | 50 | SQM | |
63 | 63 | Taking up or down 15mm dia of steel tubing and connections including cleaning for refixing or removal unserviceable pipes from site complete all as specified and directed. | 60 | RM | |
64 | 64 | Taking up or down 20mm dia of steel tubing and connections including cleaning for refixing or removal unserviceable pipes from site complete all as specified and directed. | 40 | RM | |
65 | 65 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | 79 | RM | |
66 | 66 | Ditto all as per item No 65 here-in- above but except materials.complete all as specified and directed. | 10 | RM | |
67 | 67 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. | 120 | RM | |
68 | 68 | Ditto all as per item No 67 here-in- above but except materials.complete all as specified and directed. | 5 | RM | |
69 | 69 | S & F bib taps (ISI marked) , cast copper alloy, chromium plated fancy type , screwed down, screwed for iron pipe for 15 mm bore or for brass ferule complete all as specified and directed. | 6 | EACH | |
70 | 70 | S & F in repair bib taps (ISI marked) , cast copper alloy, chromium plated fancy type , screwed down, screwed for iron pipe for 15 mm bore or for brass ferule complete all as specified and directed. | 12 | EACH | |
71 | 71 | S&F stop valves 15mm cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed. | 6 | EACH | |
72 | 72 | S&F stop valves 20mm cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed. | 3 | EACH | |
73 | 73 | S&F in repair stop valves 15mm cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed. | 9 | EACH | |
74 | 74 | S&F in repair stop valves 20mm cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed. | 1 | EACH | |
75 | 75 | S&F in repair stop valves 15mm cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed. | 8 | EACH | |
76 | 76 | S&F in repair stop valves 20mm cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed. | 8 | EACH | |
77 | 77 | S&F pillar taps, ISI marked cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia of pipe and fixed complete all as specified and directed. | 3 | EACH | |
78 | 78 | S&F in repair pillar taps, ISI marked cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia of pipe and fixed complete all as specified and directed. | 4 | EACH | |
79 | 79 | S & F in repair 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90gms) complete all as specified and directed. | 4 | EACH | |
80 | 80 | S&F in repairs brass chromium plated shower roses 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. | 20 | EACH | |
81 | 81 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. | 10 | EACH | |
82 | 82 | S&F 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. | 5 | EACH | |
83 | 83 | S & F vitreous china wash down water closet pan (pedestal pattern) white with integral foot rest with ‘P’ or ‘S’ trap (excluding flushing cistern and flush pipe) including all fitting with seat cover complete all as specified and as directed. | 3 | EACH | |
84 | 84 | S&F in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, back inlet and integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed. | 4 | EACH | |
85 | 85 | S & F vitreous China wash basin, white, flat back, size 450x300mm including brackets, waste fittings, waste coupling, 32mm dia waste pipe, complete all as specified and directed. | 7 | EACH | |
86 | 86 | S&F PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers complete all as specified and directed.\n | 3 | EACH | |
87 | 87 | S&F in repairs PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers complete all as specified and directed.\n | 4 | EACH | |
88 | 88 | Dismantling unwater tanks capacity exc. 500 litres and n.exc. 1000 liters and removing from site complete all as specified and directed. | 3 | EACH | |
89 | 89 | S&F Rotational moulded polyethylene water storage tanks, 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position icluding making connections complete all as specified and directed. | 2 | EACH | |
90 | 90 | S&F Rotational moulded polyethylene water storage tanks, 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position icluding making connections complete all as specified and directed. | 4 | EACH | |
91 | 91 | S & F 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gm ) complete all as specified and directed. | 5 | EACH | |
92 | 92 | S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gm ) complete all as specified and directed. | 4 | EACH | |
93 | 93 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed. | 40 | RM | |
94 | 94 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed. | 70 | RM | |
95 | 95 | S&F 75mm bore PVC (SWR) bends complete all as specified and directed. | 5 | EACH | |
96 | 96 | S&F 110mm bore PVC (SWR) bends complete all as specified and directed. | 10 | EACH | |
97 | 97 | S&F 75mm bore PVC (SWR) junction single, (Single T) with access door equal or unequal complete all as specified and directed. | 5 | EACH | |
98 | 98 | S&F 110mm bore PVC (SWR) junction single, (Single T) with access door equal or unequal complete all as specified and directed. | 7 | EACH | |
99 | 99 | S&F 110mm bore PVC (SWR) reducers complete all as specified and directed. | 7 | EACH | |
100 | 100 | M&L for PVC (SWR) vent cowl of bore 75mm complete all as specified and directed. | 5 | EACH | |
101 | 101 | S & F 110mm PVC (SWR) WC connector with lip ring complete all as specified and directed. | 7 | EACH | |
102 | 102 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed. | 8 | EACH | |
103 | 103 | S&F 110/110mm bore PVC (SWR) P trap complete all as specified and directed. | 7 | EACH | |
104 | 104 | Demolition and breaking up 150 mm (internal) dia drain pipes (SWG), AC ,PVC(SWR) or reinforced concrete set in cement mortar complete all as specified and directed. | 16.5 | RM | |
105 | 105 | S&F 150mm internal dia Salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed. | 32.1 | RM | |
106 | 106 | M & L for concrete bed to drain pipes of 150mm bore including packing under ,and haunching against the sides of pipes after they are laid and tested in cement concrete grade M10 using 40mm graded crushed stone aggregate complete all as specified and directed. | 30 | RM | |
107 | 107 | Cutting into existing manholes for connecting new drains for pipe of 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate, smooth finished, and reforming benching as required complete all as specified and directed. | 3 | EACH | |
108 | 108 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed. | 33 | CUM | |
109 | 109 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed. | 32.23 | CUM | |
110 | 110 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. | 8.43 | QTL | |
111 | 111 | Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed. | 145 | SQM | |
112 | 112 | Dismantling timber scantlings 40 sq. cm and over in section, in unframed work and in any position complete all as directed. | 1.64 | CUM | |
113 | 113 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as directed. | 30 | RM | |
114 | 114 | Dismantling boarding of any description, fixed in any position with nails complete all as specified and directed. | 111 | SQM | |
115 | 115 | E/M work | |||
116 | 116 | Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed. | 41 | POINT | |
117 | 117 | Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) | |||
118 | 117.01 | One light/fan point controlled by one, one way switch | 38 | POINT | |
119 | 117.02 | One socket outlet 5 Amps 5 pin on independent board | 9 | POINT | |
120 | 117.03 | One socket outlet 5 Amps 5 pin on same board with other switches | 3 | POINT | |
121 | 118 | Ditto all as per item No. 117 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed. | 5 | POINT | |
122 | 119 | S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed. | 50 | EACH | |
123 | 120 | S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed. | 5 | EACH | |
124 | 121 | S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed. | 12 | EACH | |
125 | 122 | S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed. | 5 | EACH | |
126 | 123 | S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed. | 38 | EACH | |
127 | 124 | S&F modular white cover plate with frame 12 module. | 3 | EACH | |
128 | 125 | S&F modular white cover plate with frame 6 module. | 2 | EACH | |
129 | 126 | S&F modular white cover plate with frame 4 module. | 7 | EACH | |
130 | 127 | S&F modular white cover plate with frame 3 module. | 13 | EACH | |
131 | 128 | S&F blank spacer plate single module. | 7 | EACH | |
132 | 129 | Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete all as specified and directed. | 1 | EACH | |
133 | 130 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.\n(Make: Havells cat part No. DHDPSHODRW 08 or as per list approved makes enclosed hereinafter) | 1 | EACH | |
134 | 131 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.\n(Make: Havells cat part No. DHDPSHODRW 04 or as per list approved makes enclosed hereinafter) | 3 | EACH | |
135 | 132 | S&F MCB single pole and neutral 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. | 4 | EACH | |
136 | 133 | S&F MCB single pole 06 to 32Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. | 12 | EACH | |
137 | 134 | S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as specified and directed. | 4 | EACH | |
138 | 135 | Taking down old unserviceablelight fittings of any description and removal from site complete all as specified and directed. | 21 | EACH | |
139 | 136 | S&F 1200mm basic all purpose surface & wall mounted LED batten with polycarbonate housing & integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. \n(Make: Havells Lumiline Cat No.LUMILINEBS20WLED865SPCWH or equivalent in Philips/ Bajaj/ Crompton) | 29 | EACH | |
140 | 137 | S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP-66 high power LED light 20 watt, 110LM/W including suitable size of wall bracket and connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. \n(Make: Crompton Astra Neo Cat No. LSTS-20-CDL-M or equivalent in Bajaj/Philips/Havells) | 3 | EACH | |
141 | 138 | S&F metal exhaust fan AC single phase 230 volts of size 300mm sweep with louvre complete fixed and opening of wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting complete all as specified and directed. (Make: Crompton Model No Drift Air 12' or equivalent in Havells/Bajaj) | 3 | EACH | |
142 | 139 | Taking down old unserviceable service cable including batten/suspending wires complete all as specified and directed. | 68 | RM | |
143 | 140 | S&F Service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 sq mm 2 Core fixed to walls or suspended by insulating hanger not more than one meter apart including 4mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete all as specified and directed. . | 198 | RM | |
144 | 141 | Taking down ceiling/exhaust fan including dismantling all necessary electrical connections to facilitate repairs to ceiling/wall complete all as specified and directed. | 3 | EACH | |
145 | 142 | Hanging only/ Refixing ceiling/exhaust fan removed under item Srl No 150 above and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. | 3 | EACH | |
146 | 143 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately) | 1 | EACH |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail