}

Re-Development Of Amcs Own Nehru Bhavan, Buddi Lane, Aurangabad Rfp And Rfq , E TENDER CELL, PHASE 3 BUILDING AURANGABAD-Maharashtra

Aurangabad Municipal Corporation has published Re-Development Of Amcs Own Nehru Bhavan, Buddi Lane, Aurangabad Rfp And Rfq . Submission Date for this Tender is 22-07-2021. Road Work Tenders in E TENDER CELL, PHASE 3 BUILDING AURANGABAD Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

28120583
Corrigendum : Re-Development Of Amcs Own Nehru Bhavan, Buddi Lane, Aurangabad Rfp And Rfq
Open Tender
Indian
Maharashtra
E TENDER CELL, PHASE 3 BUILDING AURANGABAD
22-07-2021

Tender Details

Re-Development Of Amcs Own Nehru Bhavan, Buddi Lane, Aurangabad Rfp And Rfq

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 30-Jun-2021 PREBID MEETING CORRIGENDUM Technical Bid 06-07-2021
2 02-Jul-2021 DATE EXTENSION Date 15-07-2021
3 13-Jul-2021 corrigendum for date extension Date 22-07-2021

Key Value

Document Fees
INR 5000 /-
EMD
INR 2694389.0 /-
Tender Value
INR 26.94 Crore /-

BOQ Items

Name of Work : Re-Development of AMC"s Own Nehru Bhavan, Buddi Lane, Aurangabad(RFP AND RFQ)
Sl. No. Item Description
1DISMANTLING WORK: Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete. PWD SSR 2020-21 Item No.3.11
2Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately PWD SSR 2020-21 Item No.7.25
3Dismantling flat wooden or A.C. Sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete.PWD SSR 2020-21 Item No.46.06
4Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.PWD SSR 2020-21 Item No.46.09
5Dismantling wooden floor including beams and joists, stacking the materials as directed with all leads, lifts etc. Complete. PWD SSR 2020-21 Item No.46.21
6Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. PWD SSR 2020-21 Item No.46.29
7Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete PWD SSR 2020-21 Item No.46.12
8Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete. PWD SSR 2020-21 Item No.46.14
9Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. Complete PWD SSR 2020-21 Item No.46.15
10Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. Complete PWD SSR 2020-21 Item No.46.16
11Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. Complete. PWD SSR 2020-21 Item No.46.19
12Removing mud plaster including disposing of the spoils as directed with all leads, lifts etc, complete. PWD SSR 2020-21 Item No.46.23
13Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. Complete PWD SSR 2020-21 Item No.46.28
14Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete PWD SSR 2020-21 Item No.46.40
15Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete. PWD SSR 2020-21 Item No.46.41
16Removing Spectators Chairs and stacking as instructed by Engg-in-charge (As per MR)
17CIVIL - EARTH & STRUCTURE WORK: Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means PWD SSR 2020-21 Item No.21.02
18Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means PWD SSR 2020-21 Item No.21.08
19Excavation for foundation in Hard rock by blasting including trimming and leveling the bed bychiselingwherenecessaryandremovingtheexcavatedmaterialandstackingitin measurable heaps within a distance of 50 metres from the building area including dewatering andbackfillingwithavailableearth/murum,watering,ramming,etc.complete.(Liftupto 1.5m) By Mechanical Means PWD SSR 2020-21 Item No.21.17
20ProvidingpreconstructionalantitermitetreatmentasperI.S.6313(Part-II)bytreatingthe bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percentofchlorophyrifospersquaremeterofsurfaceareacovering10yearsguaranteeon bond paper. PWD SSR 2020-21 Item No.21.22
21Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper PWD SSR 2020-21 Item No.21.23
22Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. PWD SSR 2020-21 Item No.21.24
23Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper. PWD SSR 2020-21 Item No.21.25
24Transportationofexcavatedmaterialobtainedfromdebrisofvarioussortsincludingnecessary excavation / loosing including loading,unloading and conveying and disposing as directed. (Upto 5 Km) Sr.I.No.335 (Bridge)
25Providing general pest control services to the building to control the nuisance of cockroaches, lizards, pin bores and other insects etc. with 4 operations in a year and monthly check up. PWD SSR 2020-21 Item No.21.30
26Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. Complete. PWD SSR 2020-21 Item No.21.36
27Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete. PWD SSR 2020-21 Item No.21.37
28Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. PWD SSR 2020-21 Item No.21.38
29Providing and fabricating structural steel work in rolled sections, fixed with connecting plates oranglecleatsinmainandcrossbeams,hipandjackrafters,purlinsconnectingtotruss members andthe like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil paintingofapproved quality and shade etc. complete. PWD SSR 2020-21 Item No.23.02
30R.S.J. Channel
31Providing structural steel work in trusses, other similar trussed purlins and members with all bracing,gussetplatesetc.asperdetaileddesignsanddrawingsorasdirectedincluding cutting,fabricating,hoisting,erectingfixinginposition,Makingriveted/bolted/welded connectionandone coat of anticorrosive paint andover it 2 coats of oil painting approved quality and shade etc. complete. PWD SSR 2020-21 Item No.23.04
32Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete PWD SSR 2020-21 Item No.23.12
33ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water,Steel centering,formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) PWD SSR 2020-21 Item No.25.13
34ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Basement & Ground Floor @ Basic Rate) PWD SSR 2020-21 Item No.25.33
35For first floor
36For second floor
37ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade) PWD SSR 2020-21 Item No.25.52
38For first floor
39For second floor
40ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) PWD SSR 2020-21 Item No.25.72
41For first floor
42For second floor
43Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand (Bd.F.9 Page No. 303 and B.7, Page No.38) PWD SSR 2020-21 Item No.26.07
44ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping,compacting and roughening them if special finish istobeprovidedandcuringcomplete.(Excludingreinforcementandstructuralsteel).with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade) PWD SSR 2020-21 Item No.26.19
45For first floor
46For second floor
47ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping,compacting and roughening them if special finish istobeprovidedandcuringcomplete.(Excludingreinforcementandstructuralsteel).with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade) PWD SSR 2020-21 Item No.26.19
48For first floor
49For second floor
50ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping,compacting and roughening them if special finish istobeprovidedandcuringcomplete.(Excludingreinforcementandstructuralsteel).with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade) PWD SSR 2020-21 Item No.26.19
51Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. PWD SSR 2020-21 Item No.31.04
52Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to Invertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) PWD SSR 2020-21 Item No.31.13
53ProvidingandlayingCastinsitu/ReadyMixcementconcretein M-25oftrap/quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawingsorasdirectedincludingsteelcentering,plywood/steelformwork,steelprops, laying/pumping,compaction,finishing unevenandhoneycombedsurface withC.M.1:3of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade) PWD SSR 2020-21 Item No.26.26
54Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite/gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) With fine aggregate (Crushed sand VSI Grade) PWD SSR 2020-21 Item No.26.30
55Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / granite /gneiss / quartzite metal for R.C.C. fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) PWD SSR 2020-21 Item No.26.32
56Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. PWD SSR 2020-21 Item No.26.33
57Providing and laying Cast in situ/Ready Mix C.C. M-25 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, steel centering, formwork, cover blocks, laying/ pumping, compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) PWD SSR 2020-21 Item No.26.60
58Providing and fixing during laying in RCC Slab rectangular 2 mm thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface PWD SSR 2020-21 Item No.26.68
59CIVIL - ARCHITECTURE & FINISHES WORK: SECTION 1 - PCC MASONRY, DPC & FLOOR SUB-BASE: Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) PWD SSR 2020-21 Item No.24.01
60PLINTH PROTECTION: Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. PWD SSR 2020-21 Item No.21.38
61Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) PWD SSR 2020-21 Item No.24.01
62PCC in-situ MASONARY: Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap / granite / quartzite / gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) PWD SSR 2020-21 Item No.24.04
63For first floor
64SECTION 2 - BRICK WORK: BRICK MASONARY: Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. PWD SSR 2020-21 Item No.27.01 Basement Floor
65Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete PWD SSR 2020-21 Item No.27.05 Ground Floor
66First Floor
67Second Floor
68Terrace/ Mumty Level
69Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. PWD SSR 2020-21 Item No.27.06 Ground Floor
70First Floor
71Second Floor
72Terrace/ Mumty Level
73SECTION 3 - WATER PROOFING TREATMENT - SUB BASE: Providing and laying damp proof course 50 mm thick in M20 cemenconcrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. PWD SSR 2020-21 Item No.31.01
74Providing and applying Bitumen VG30/VG40 layer at 2 kg. per square meter over the terrace, structural slab including cleaning the surface for waterproofing as directed complete PWD SSR 2020-21 Item No.31.02
75Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. PWD SSR 2020-21 Item No.31.04
76SECTION 4 - PLASTERING AND POINTING: INTERNAL PLASTER: Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. PWD SSR 2020-21 Item No.32.04
77For first floor
78For second floor
79Providinginternalcementplaster20mmthickinsinglecoatincementmortar1:4withoutneerufinishto concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. PWD SSR 2020-21 Item No.32.07
80Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. PWD SSR 2020-21 Item No.32.27
81EXTERNAL PLASTER: Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. PWD SSR 2020-21 Item No.32.11
82For first floor
83For second floor
84Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete. PWD SSR 2020-21 Item No.32.22
85Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete PWD SSR 2020-21 Item No.32.26
86SECTION 5 - STONE WORK: Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc.Complete. Both side polish PWD SSR 2020-21 Item No.33.36
87Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. PWD SSR 2020-21 Item No.33.68
88Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) PWD SSR 2020-21 Item No.41.78
89SECTION 6 - JOINERY: Country cut teak wood double or single leaf Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete PWD SSR 2020-21 Item No.39.08
90Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete PWD SSR 2020-21 Item No.39.01
91Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Running Meter. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Running Meter. Top and side track section 61.85 x 31.75 x 1.30mm at weight 0.659 kg/Running Meter. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Running Meter. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Running Meter. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Running Meter. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Running Meter. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box PWD SSR 2020-21 Item No.39.39
92Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER Consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC "C" channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be apered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the " c " channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6 mm size steel screws including fixture fasting. Complete as per direction of engineer in charge PWD SSR 2020-21 Item No.39.47
93Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powdercoatingasperdetaileddrawingandspecificationsincludingaluminiumframes80x38mmx1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. As directed by Engineer in charge.PWD SSR 2020-21 Item No.39.68
94SECTION 7 - STEEL, ALUMINIUM AND IRON WORK: Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. PWD SSR 2020-21 Item No.40.01
95Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint) PWD SSR 2020-21 Item No.41.56
96Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) PWD SSR 2020-21 Item No.39.25
97Providing & fixing factory-made Aluminum windows of aluminum alloy HE 9WP (6063 T5/T6), powder coating of jotun/AkzoNobel of 60 micron thickness a.) Glass: 5mm thick clear float of Saint Gobain / Asahi make b.) Mesh of SS Type 304 grade of .22 mm thickness c.) Accessories: EPDM (Ethylene Propylene Diene Monomer) Gasket , SS Screws , Aluminum cleats , Roller , Push handle , Fly mesh handle , Anti lifter , U guide glass and mesh shutter complete.PWD SSR 2020-21 Item No.51.99
98Providing and fixing sky light in R.C.C. roof including frame made of M.S. angle 50 x 50 x 6 mm with hold fast, sheet glass 12 mm thick, Chicken mesh 24 gauge with all accessories and required fixtures and fastening fitting including painting etc. complete. PWD SSR 2020-21 Item No.38.31
99SECTION 8 - FALSE CEILING: Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. PWD SSR 2020-21 Item No.38.51
100Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7 Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. PWD SSR 2020-21 Item No.38.47
101Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steel suspenders). PWD SSR 2020-21 Item No.38.17
102SECTION 9 - FLOOR FINISHES AND PAVINGS: Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour asdirected and curing etc. complete. With Crushed Sand. PWD SSR 2020-21 Item No.33.10
103Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. PWD SSR 2020-21 Item No.33.67
104Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. PWD SSR 2020-21 Item No.33.25
105Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. PWD SSR 2020-21 Item No.33.42
106Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete(First Floor @ Basic Rate + 1%) PWD SSR 2020-21 Item No.33.42
107Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete(Second Floor @ Basic Rate + 2%) PWD SSR 2020-21 Item No.33.42
108Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. PWD SSR 2020-21 Item No.33.43
109For first floor
110For second floor
111Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaningetc. complete. PWD SSR 2020-21 Item No.33.49
112Machine polishing to cement/marble mosaic tiled flooring or any other type of flooring including cleaning, washing, etc. complete. PWD SSR 2020-21 Item No.33.78
113Hand polishing to dado, skirting including cleaning, washing etc. Complete PWD SSR 2020-21 Item No.33.79
114Providing wax polishing to floors and dado, preparing the surface, scaffolding etc. complete. PWD SSR 2020-21 Item No.33.80
115Providing & Fixing of The Total thickness of Flotex Flocked Carpet Sheet is 4.3mm, Commercial use is Class 33 heavy, Roll width is 2.0m, Roll length is 30m, Total weight is 1.8 kg/m2, Dimensional stability is < 0.2 %, Abrasion resistenceis>1000cycles,Castorchaircontinuoususeisr==2.4continuoususe,Lightfastnessis=6,Slip resistanceisDry-verylowsliprisk&Wet-lowsliprisk,AcousticalisImpactsound? lw=20dB&Sound absorption = 0.10, Water tightness is Pass, Reaction to fire is Bfl-s1, Slip resistance is DS: = 0.30, Body voltage is < 2kV,Thermalconductivityis0.048m2K/W.Flotexisauniquetextilefloorcoveringthatcombinesthehard wearinganddurablecharacteristicsofaresilientfloorwiththequality,warmthandcomfortofacarpet. Flotex is a strong and hygienic floor, and being completely waterproof, it is also the only truly washable textile floor. It has Textile yet 100% water washable feature,Better acoustic properties ranges from 19 to 22 db. It has waterproof backing, Over 80 million nylon6.6 fibre/ m2, Textileyet hygienic, Antimicrobial, Sealof approval from British Allergy Foundation, Lesser or Low maintenance cost compared to conventional carpets, No effect of castor wheel movement, Highly stain resistant due to its dense construction, Recommended for high traffic areas, High recycled contains, No odour/ smell as it is thoroughly cleaned along with Providing & laying 2 mm thick Eurocol 975 self-levelling compound using Eurocol 044 Europrimer Multi. The product should be manufacturedinGERMANYandmusthaveEMIDOCEEC1RPlus, GISCODEZP1.CEmarkingaccordingto DIN EN 13813: CT- C30-F6. The product should comply Base : Special cements, mineral aggregates, polyvinyl, acetate, condenser and additives Colour : Grey (As per MR)
116Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete PWD SSR 2020-21 Item No.51.13
117Providing and laying cement concrete flooring 40mm thick with M20 cement concrete laid to proper level and slope in alternate bays, including compaction, filling joints, marking lines to give appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and Curing etc. complete. With Natural Sand PWD SSR 2020-21 Item No.33.11
118For first floor
119For second floor
120Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. PWD SSR 2020-21 Item No.33.34
121For second floor
122Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete. One side polish PWD SSR 2020-21 Item No.33.37
123Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. PWD SSR 2020-21 Item No.33.35
124For first floor
125For second floor
126SECTION 10 - WHITE WASHING, COLOUR WASHING, PAINTING AND DISTEMPERING: Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. PWD SSR 2020-21 Item No.32.34
127Providing and applying 2 coats ofalluminium paint of approved make to new structural steel work in buildings and workshops including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat)etc.complete. PWD SSR 2020-21 Item No.35.06
128Rolling Shutter
129Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. PWD SSR 2020-21 Item No.35.07
130Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. PWD SSR 2020-21 Item No.35.07
131Pressed Steel Frame
132Rung Ladder
133Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete. PWD SSR 2020-21 Item No.35.20
134Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. PWD SSR 2020-21 Item No.35.21
135Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. PWD SSR 2020-21 Item No.35.26
136Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in one coat including scaffolding, preparing the surfaces. (excluding the primer coat.)etc. complete. PWD SSR 2020-21 Item No.36.10
137Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. PWD SSR 2020-21 Item No.36.14
138Providingandapplyingmelaminepolishofrequiredfinishtothewoodworkbyspraymachineincluding knottingandpreparingtheevensurfacebyscraping,applyingFrenchpolish,scaffoldingifrequiredetc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary. PWD SSR 2020-21 Item No.36.09
139SECTION 11 -WATER SUPPLY, PLUMBING, DRAINS AND SANITARY APPLIANCES: C.P.Towel ring square jaquar make continental (Cat. No. ACN 1121N ) Sr No. 229
140Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. PWD SSR 2020-21 Item No.42.20
141Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. PWD SSR 2020-21 Item No.31.05
142Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles) (As directed by Engineer in Charge) PWD SSR 2020-21 Item No.31.06
143C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751) Sr No. 232
144Providing and fixing wall hung white wash basin of size 350x450x165mm with approved make pillar cock, C.P. Angular stop cock long thread approved make continental including SS bottle trap of approved make having necessary pipe connection up to the outside face of the wall etc complete as directed by Engineer in charge. PWD SSR 2020-21 Item No.48.32
145Providing and fixing white european type wall-hung, of size 360mm x 360mm x 575mm with flush valve of approved make including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.) PWD SSR 2020-21 Item No.48.30
146Providing and fixing white glazed urinal of series with Pressmaticauto closing valve of having 32mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge. PWD SSR 2020-21 Item No.48.31
147Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting andmaking good the walls and floors wherever required ,seat cover, cistern & wash basin fittings,nuts, bolts and gasket etc complete of make Hindware(Matrix series 70002)/ Cera or equivalent as per the direction of Engineer-In-charge. PWD SSR 2020-21 Item No.51.63
148SECTION 12 - ACOUSTIC INSULATION: Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut-Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete PWD SSR 2020-21 Item No.51.05
149Providing and supplying Armstrong ‘Optra Acoustical Wall Paneling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A as per ASTM E-84, fabric with an option of colors – Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut & Shell as per the choice of the Architect of size 600X600 mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer. INSTALLATION: 4nos. Armstrong wall panel Impalers of shall be fixed to the wall surface using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Armstrong Optra wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure. (As per MR)
150Providing and Fixing Armstrong Channeled Woodworks perforated panels of: Width 130mm/ Gap 30mm, thickness of 15mm and length 2400 mm or as design required by the Architect/ approving engineer, made of a high density fibre board with minimum 725 Kg/M3 density substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge. INSTALLATION: Install wooden battens (provided by others) of section 50x50mm or as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium extruded keel for channelled woodworks provided by Armstrong over the lowest and second wooden batten at an on-centre distance of 600mm. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge and insert the tongue end of the panel in the skirting. Place the inside clip on the groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure. (As per MR)
151Providing and Fixing Armstrong Linear Woodworks perforated panels of width 150mm, thickness of 15mm and length 2400 mm or as required by the Architect/ approving engineer, made of a high density fibre board with minimum 725 Kg/M3 density substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge. INSTALLATION: Install wooden battens (provided by others) of section 50x50mm or as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium extruded keel for channelled woodworks provided by Armstrong over the lowest and second wooden batten at an on-centre distance of 600mm. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge and insert the tongue end of the panel in the skirting. Place the inside clip on the groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure.
152KNAUF AMF HERADESIGN WOOD WOOL: 3-D/ EMBOSSED ARTISTIC CHARACTER DESIGN OVER LIGHT BACKDROP [DEPTH: 75-100MM] (As per MR)
153Providing and Fixing Armstrong Linear Woodworks perforated panels of width 150mm, thickness of 15mm and length 2400 mm or as required by the Architect/ approving engineer, made of a high density fibre board with minimum 725 Kg/M3 density substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge. INSTALLATION: Install wooden battens (provided by others) of section 50x50mm or as approved by the Architect on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium extruded keel for channelled woodworks provided by Armstrong over the lowest and second wooden batten at an on-centre distance of 600mm. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge and insert the tongue end of the panel in the skirting. Place the inside clip on the groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure. (As per MR)
154Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with OPTRA FG PEBBLE WHITE 15 mm (Microlook 90) Edge Tiles with Armstrong Silhouette Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance =85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 300 x 1200 x 15mm , suitable for Green Building application, with Recycled content of 43% (GW) The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/M2 with a minimum pull out strength of 100 kgs.Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 10 year warranty. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre.The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 300mm centre to form 1200 x 300 mm module.Cut cross tees longer than 600mm require independent support.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a Galvanised Thickness of 80gsm, A pre Straightened Hanger wire of dia – 2.5 mm of 1.8 m length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68 mm with a minimum pull strength of 110 kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner.(As per MR)
155Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with OPTRA FG CLASSIC BLACK 20MM (Microlook 90) Edge Tiles With Armstrong Suprafine 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, ,Colour Black, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on Armstrong Suprafine 38 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 14 Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 10 year warranty. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre.The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module.Cut cross tees longer than 600mm require independent support.600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a Galvanised Thickness of 80gsm, A pre Straightened Hanger wire of dia – 2.5 mm of 1.8 m length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68 mm with a minimum pull strength of 110 kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner.
156SOUNDSCAPES® CANOPIES in Audiotorium Lobby/ External Foyer (As per MR)
157Providing & Fixing in position, Acoustical Panelling made from Fabric wrapped Compressed polyester fibre nonwoven 9 mm panels on, 50 x 50 mm sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete. PWD SSR 2020-21 Item No.51.01
158Providing & Fixing in position, Acoustical Panelling made from 12mm wp Ply wood & 1.5mm laminate on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete PWD SSR 2020-21 Item No.51.04
159Providing & Fixing in position, Acoustical Ceiling made from Rigitone 8/18 perforated panels on approved heavy duty G.I. frame, ceiling channels at 300 c to c, & intermediate channels not more than 1200 c to c, suspended with Hangers from Roof, in front of 1000 Gsm synthetic wool 50 mm thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete PWD SSR 2020-21 Item No.51.09
160Providing & Fixing in position, Acoustical Ceiling made from Compressed polyester fibre nonwoven 9mm panels on approved heavy duty GI frame 300 mm c to c & intermediate channels at 1200 mm c to c, suspended with Hangers from Roof, including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete PWD SSR 2020-21 Item No.51.08
161Supply & Fixing of European Steam Beech wood flooring of dimensions 95mm x 18mm x 600-1200mm with T & G joinery bonded on double layer 12mm ISI commercial plywood supported by Salwood frame work of section 45mm x 45mm & 600mm centre to centre cleated directly to the subfloor with dash fasteners. Neoprene pads 150mm x 150mm x 7mm to be placed under the grids for shock absorption and layered non-woven thermal polyester wadding of 40mm thickness to be put within the grids of the frame for acoustics. The floor will be duly grinded using 36, 60,120 grit abrasives followed by joint sealing with French chalk and sanding sealer & finally polishing with Polyurethane coating  complete in all respects. (As per MR)
162Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & 18mm Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x 100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. .including all materials labour,finishing etc complete PWD SSR 2020-21 Item No.51.06
163SECTION 13 - STAINLESS STEEL WORK - RAILING: Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waist slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92 kg / r. metre PWD SSR 2020-21 Item No.51.73
164STAINLESS STEEL + GLASS RAILING: Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. completePWD SSR 2020-21 Item No.40.07
165SECTION 14 - ROOF SHEETING: Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm centerto-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) PWD SSR 2020-21 Item No.38.34
166Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). PWD SSR 2020-21 Item No.38.08
167SECTION 15 -IN BUILT FURNITURE - CUPBOARDS: Providing and fixing Shutter to wall Cupboard consisting of Teak Wood styles and Rails 25 mm thick and 75 mm wide with panel insert of 12 mm thick particle Board with one approved coloured Laminated Face on one side 1.5 mm thick, bonded with Phenol Formaldehyde Synthetic Resin including Lipping Beading. Iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). PWD SSR 2020-21 Item No.37.22
168600mm Deep Cupbored (As Per MR)
169SECTION 16 -STORAGE - UNDERCOUNTER/ PLATFORM: Providing and Fixing under-counter/ under-plateform 600mm deep as per architecture design and drawing as per direction of Engineer-in-Charge (As per MR)
170SECTION 17 -WALL FINISHES / EXTERNAL CLADDING: Providing and fixing 3.5 to 4 mm thick Veneer finish wall Paneling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition covered by 6 mm thick marine plywood of the generally confiriming to I:S 710-1980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and woodwork with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge. PWD SSR 2020-21 Item No.37.26
171Providing and fixing decorative teak plywood veneer lining 4 mm thick with backing of teak In wood frame work of battens 12 mm X 25 mm at 30 cm center to center fixed to walls and pillars with 12 mm thik phywood building without skirting and cornice as per drawings including necessary iron work and finishing the exposed wood work with french polish etc. complete. PWD SSR 2020-21 Item No.37.13
172Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge) PWD SSR 2020-21 Item No.51.192
173Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete. One side polish PWD SSR 2020-21 Item No.33.37
174Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate) PWD SSR 2020-21 Item No.51.235
175SECTION 18 -MISCELLANEOUS: Fixed back, tipup chair with common arms, fully upholstered in our standard foam bonded fabric. To be fixed e in ctc "530mm" with arm rest cupholders or wood waterfall as per requirement.
176Pushback chair with tip down seat, fully upholstered in our standard foam bonded fabric. Available in ctc "530-550mm" with arm rest cupholders or wood waterfall as per requirement.
177Providing & fixing in position, heavy duty fully upholstered Auditorium chairs 520 mm c to c In tip-up type. Height of back should be less than 1030 mm with plastic protective cover on back and bottom having teak wood handles. Back to back distance is 1000mm. The auditorium chairs should be of following specifications 1. Powder Coated Heavy duty MS Stand. 2. Individually moulded , ergonomically designed seat and back cushions. 3.Moulded Polyurethane Foam cushion. PU foam density 48 – 52 Kilograms/cu.mtr 4. Moulded Polyurethane Foam manufactured in certified ISO 9001 facility to ensure consistency in density for longevity. 5.Upholstered in Foam laminated stretch sandwich Fabric for clean finish and soft comfortable feel as per the colour & pattern selected by the client. 6.Seat and Back should have moulded synthetic protective cover. 7. Wooden or PU armrest 65mm x 20mm - 330mm long . 8.Mounted using Anchor fastenersPWD SSR 2020-21 Item No.51.18
178Providing of Roller Blinds comprising of screen free fabric with 5% openness composition of TPO 77% and Polyester 23%, Fabric weight 440G+/-5% weight per sqm, Thickness 0.80mm, Fire resistance standard –NFPA 701PASS(KOREA –FITI).Thebreakingstrength(N/5cm)WP:1703andWF:1397andcolorfastness– BluescaleGRADE8andUV-resistanceGreyScaleGRADE4.TheanitbacteriaAATCC100:PASSand AntifungalASTMG-21: GRADE1. Elongation at break (%) WP: 32%and WF: 26%. Thecontrolclutchdriveunit engineeredheavydutychaindrivepulleyoperatingsystemconsistingofgearclutchhousingandlocking plugcontainingminimum6ribsandinsertedatminimumof37mmintorollertube.Itisselflubricating Exclusive clutch with safety pins forsecurebracket installation andunlocking pinfor quick manualremoval. Universalclutch ismostconvenient for largewindowsdown tothesmallest windows. It shallbedrivenbya ball chain pulley with ball chain and can be positioned at Right hand or Left hand side of the shade. Clutch gearration1.75:1forreducedoperatingforce onlargerblinds.Tube bearingplugidlerExclusiveself lubricatingspringloadedplasticbearingendplugwithpositivelockingwheelallowsforadjustmentand providesforasecureinstallationandremovalofshade.Tubebearingplugcontainminimum6ribsand inserted aminimumof 37mmintoroller tube. Mountinghardware bracketsuniversalbrackets includingend plugbracketwithlockdownretainerdevice.Bracketsfinishofpowdercoatedmetalinstallationbrackets made of stamped and hardened steel with 46mm projection for wall, ceiling and side fitting with screws and endcapcovers.Rollertubecircular-shapedaluminiumtubeextrudedfromalloy6060andtemperT66– EN755 of 37mm inside diameter and outside diameter 40.2mm extruded tube to have a 1.6mm wall thickness withstandardanodizednaturalfinish. Heavilyreinforcedwithminimumsixinternalribsprovidingadditional tensilestrengthandallowsforsecureplacements ofclutch andendplug. Bottomrailflat-shapedextruded aluminium from alloy 6060 and temper T66 – EN755 of dimension 13mm * 30mm and wallthickness of 1.5mm and weight of 390g/m. Rail standard finish of powder coat whitecolour and provided cover.Ball chainshall be 2mm diameter cord with 4.5mm diameter acetal balls moulded coaxially to it on 11.8mm pitch to form an endless ballchain. It is used forraisingor loweringaction of the shades. Plasticparts allplastic components are UV-stable compounds available white colour.
179Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) PWD SSR 2020-21 Item No.51.19
180Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) PWD SSR 2020-21 Item No.51.20
181Pedestal Unit @ 420Lx450Dx650HT Providing & Fixing of PEDESTAL @ 420Lx450Dx650HT :- To be made out of Complete Membrane consist of three Drawers as per drawing. Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) PWD SSR 2020-21 Item No.51.22
182Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT, Curvilinear Table Top @ 1500/1500Lx600/600D :- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, GABLE END to be made of 25 mm thick Prelaminated particle board with PVC edge band, KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, along with 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, PWD SSR 2020-21 Item No.51.30
183CIVIL - ARCHITECTURE & FINISHES WORK: STRUCTURE GLAZING: Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). (As per MR)
184Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
185Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.PWD SSR 2020-21 Item No.5.3
186Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. PWD SSR 2020-21 Item No.5.4
187LIFTS - 22-25 PASSENGERS/ 1496-1700 KG SPEED (mps) : 1.5 - 2.0 mps RISE (m ) : 12 m (Four Floors: Basement - 2nd) STOPS : 5 Stops With (all opening on the same side) CONTROLLER TYPE : ACD3-MRL DRIVE : VF Regenerative (Closed Loop) POWER SUPPLY : 400/415 Volts (3 Phase AC) OPERATION : Full collective operation CAR GROUP : One car (simplex) MACHINE : PM Gearless (Located in shaft on top of guide rails) TRACTION MEDIA : Flat Coated Steel Belt CAR FINISH : Rear Mid Panel = Stainless Steel with Mirror Rear Corner Panels = Stainless Steel Side Mid Panels = Stainless Steel Side Corner Panels = Stainless Steel Front Panels = Stainless Steel FLASE CEILING FINISH : Stainless Steel VENTILLATION : Cross flow fan HAND RAILS : Stainless Steel Mirror Finish Handrails on rear car panels FLOORING : PVC VINYL TILES CAR DOOR FINISH : Stainless Steel LANDING DOORS FINISH : Stainless Steel FIRE RATED DOORS : Fire rating-120mins PIT DEPTH : 1600-1800 OVERHEAD 4400-4800 HOISTWAY DIMENSIONS (W x D – mm) : 2300 mm W x 3000 mm D CAR DIMENSIONS (W x D x H - mm) : 1400 mm W x 2400 mm D x 2400 mm D CAR & HOISTWAY DOOR TYPE : Telescopic 2 speed doors DOOR OPENING (W x H mm) : 1100-1200 mm W x 2100-2200 mm H DOOR OPERATOR : DC Door Operator COP : COP for stops <= 12 (950mm) in Stainless Steel + Glass CAR POSITION INDICATOR : Monochrome LCD-Blue Background & White font Dot matrix (LED) Scrolling Display HALL BUTTON ARRANGEMENT : LCD Monochrome type STANDARD FEATURES : Anti-nuisance Car Call Protection Independent Service (for Duplex only) Overload Device Nudging Emergency Firemen’s Service Emergency Car Light UnitInfrared Curtain DoorProtection Door Time Protection Emergency Alarm Button Extra Door Time of Lobby & Parking Door Open/Close Button Manual Rescue Operation Belt Inspection Drive Auto Fan Cut Off
188STACK PARKING: 1 driving level = 2 parking levels Dependent parking/ valet parking High level of operational and functional safety Single units for 2 cars Weight Capacity - 2 Ton / 2.6 Ton Height - 370-390 cm/ as per site Breadth - 245 cm/ as per site Temperature The installation is designed to operate between +5°and +40°C. Atmospheric Humidity: 50% at +40°C. Conformity test All our systems are checked according to EC machinery directive 2016/42/EC and EN 14010. Protection against corrosion Regular maintenance by qualified personnel can be provided by means of an Annual Service Contract. Fire Safety Independent of a maintenance workings has to be carried out Clean up galvanized parts and platforms of dirt and road salt as well as other pollution (corrosion danger) Pit must be always ventilated and dearated well. Type (sample make KLAUS adopted)
189CP 61-EV-210-+
190CP 61-EV-210- -
191CP 61-EV-210- X
192CP 61-EV-210- Y
193CP 61-EV-210- Z
194WASHROOM AUTOMATION: HAND DRYER Tissue Paper Dispenser + Waste Receptacle: 3 in 1 Panel (Hand Dryer + Tissue Paper Dispenser + Waste Receptacle) Multifunction Recessed Washroom Panel (Consisting of Hand Dryer + Tissue Dispenser + Waste Receptacle),Hand Dryer :1350W,Wall Opening Required : 300mm (W) x 1655mm (H) x 120mm (D) Construction : Stainless Steel #304 Non Magnetic, Matt Finish Mounting : Wall Mounted Operation : Touch-Free Infrared Activation Sensor Range : 12 cm – 15 cm Hand Dry Time : approx 20 Seconds Auto Cutoff : 60 Seconds Motor : Brush AC Type Motor Speed : 25,000 RPM Rated Power : 1350W (Motor 550 W + 800 W Element) Current : 15 A Protection Class : IPX1 Blowing Volume : > 270 m3/h Air Speed : > 95 m/s
195Sanitary Napkin Dispensar + Waste Receptacle: Sanitary Napkin Hygiene Panel (4in1) - For Femine Washroom, Sanitary Napkin Hygiene Panel (4in1) - For Femine Washroom,Sanitary Napkin Capacity : 20-25 PcsWaste Receptacle Capacity : 4.6 Litres, Equipped With Full-length Stainless Steel Piano FlapDisposable Bags Capacity : 50 BagsDimension : 600mm (H) x 330mm (W) x 130mm (D)
196Wall Mount Waste Bin Wall Mount Waste Bin,Capacity : 16 Litres (Female Washroom)
197Wall Mount Waste Bin for WC Area, Capacity: 4.6 Litres or more, (Male Washroom)
198Automatic S.Steel Hand Sanitizing Dispenser (For IPA Soft Gel or alchohal based liquid both) 2000-2500ML
199Under Counter Automatic Soap Dispenser Supplying of Automatic stainless steel Soap dispenser, Capacity : 1000 ML, Dispense Volume : One Drop 2 ML, Sensing Range : 5 – 150 mm, Mounting & Refilling: Under counter
200DRINKING WATER COOLER/ FILTER: Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters per hour and storage capacity 150 liters with partially stainless steel body as per specification No. AP-WCR/WC Chapter 3-3-3
201RO+UV+UF that facilitates a flow rate of up to 50 litres/hour with TDS Controller Purification Production Rate - 50 L/hr. Maximum Duty Cycle - 250 L/Day Filter Cartridge - Sediment,Activated Carbon,UF,Post Carbon Body Material - ABS Food Grade Plastic Membrane Type - Thin Film Composite RO (2) UF Membrane - 0.1 - 0.01 Micron Auto Flushing System - Yes Min. /Max. Operating pH - 6.5-8.0 MR-8
2022KVA Stabilizer 170-250 Voltaze Naturally Aircooled MR-9
203KHURRA: Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (As per MR)
204CIVIL - SITE DEVELOPMENT: SECTION 1 - SITE CLEARANCE: A.TREE CUTTING: Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any. PWD SSR 2020-21 Item No.2.01
205Cutting down trees including trunks and branches with girths above 60cm to 90cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any. PWD SSR 2020-21 Item No.2.02
206Cutting down trees including trunks and branches with girths above 90cm to 180cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any. PWD SSR 2020-21 Item No.2.03
207B.SITE CLEARANCE: Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area. PWD SSR 2020-21 Item No.2.07
208Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. PWD SSR 2020-21 Item No.2.09
209SECTION 2 - ROAD: Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.) PWD SSR 2020-21 Item No.2.10
210Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. PWD SSR 2020-21 Item No.2.18
211Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. PWD SSR 2020-21 Item No.2.25
212Supplying hard murum/ kankar at the road site, including conveying and stacking complete. PWD SSR 2020-21 Item No.2.29a
213Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. PWD SSR 2020-21 Item No.2.31
214Providing, laying and spreading soil on a prepared sub grade, pulverizing, adding the designed quantity of cement to the spread soil, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base/base. PWD SSR 2020-21 Item No.2.36
215Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - I Material PWD SSR 2020-21 Item No.3.04
216Brooming the W.B.M. surface by wire Brushes, coir brushers, dusting, cleaning etc. for receiving the bituminous treatment complete. Brooming the water Bound Macadam surface by wire. PWD SSR 2020-21 Item No.3.14
217Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. PWD SSR 2020-21 Item No.3.23
218Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 Kilogram/10 Square Metre. (VG-30 bulk bitumen rates are considered to arrive at rates) PWD SSR 2020-21 Item No.3.31
219Providing and applying tack coat on the prepared surface heating by flames in Boiler and spraying bitumen with sprayer on Concrete surface treated with primer @ 3.25 Kilogram/10 Square Metre (VG-30 bulk bitumen rates are considered to arrive at rates) PWD SSR 2020-21 Item No.3.33
220BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) PWD SSR 2020-21 Item No.3.48
221Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KilogramSquare Metre. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) PWD SSR 2020-21 Item No.4.01
222Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge. PWD SSR 2020-21 Item No.5.01
223Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control Over 10cm Wide On New Surface PWD SSR 2020-21 Item No.6.08a
224Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat"s Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000Kilogramtested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kilogram. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer"s recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. PWD SSR 2020-21 Item No.6.09
225Providing and Fixing of Median Marker that are made of tough, high impact resistant, injection-molded, thermoplastic body with an isosceles trapezoidal structure of length, width and height not less than 15cm, 10cm and 10cm respectively and thickness not less than 1.8mm, the body structure shall be rounded at its acute angle, all the corners and edges. The plastic used for molding the Median Marker shall have a minimum Notched Izod Impact strength value of 600 J/m at room temperature, when tested in accordance with ASTM D256 and shall retain at least 70% of this value when subjected to accelerated weathering for 1000hrs as per ASTM G155 or UL746C. The logo of the manufacturer shall be embossed on either side of the body in the injection molding process. The Median Marker shall have rectangular-shaped, fluorescent yellow color retro-reflective sheeting of size not less than 8.5cm*8.5cm and with fully reflective micro prismatic cube corners as its retro-reflective elements as per IRC 67 2010 and ASTM D4956 type XI specifications reflectivity values. The retro-reflective sheeting shall be one or both sides of the Median Marker and shall be edge protected with no exposed edges which will prevent edge lifting, vandalism, sheeting damage, etc. The Median Marker shall be fixed by a combination of epoxy adhesive and grouting. PWD SSR 2020-21 Item No.6.10
226Providing and applying Cold plastic paint two component rolled on surfacing material solvent free,high build two pack seamless,tough,skid resistant,material with has property of attaining 2.00mm thickness in single coat application white(or as required colour )based on glass and colour retaining acralic cross linking resin system for coloured road surfacing including surface cleaning and cost of all material etc. complete. (All inclusive on bitumen or concrete surface) work shall carried out as per IRC 35-2015 clause 2.2) PWD SSR 2020-21 Item No.6.12b
227Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one Number of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cutout sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm diamade out of 1.5mm aluminum sheet PWD SSR 2020-21 Item No.6.27a
228Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern. PWD SSR 2020-21 Item No.48.06
229ELECTRICAL: POINT WIRING: Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 Square meterm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW.(Non Auditorium Area)CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-9-9
230Secondary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 Square meterm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG- PW/CW.(Non Auditorium Area)CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-9-23
231Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 Square meterm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW.(Auditorium Area)CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-9-9 + Chapter 1-6-2 (30m)
232econdary point wiring for additional light/ bell point, concealed type in min 20 mm PVC conduit with 1.5 Square meterm. (2+1E) FR/FRLSH grade copper wires with required accessories as per specification No: WG- PW/CW.(Auditorium Area)CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-9-23 + Chapter 1-6-2 (7.5m)
233MODULAR SWITCH/SOCKETS: Supplying and erecting modular type switch socket 6 / 10 A with indicator, ISI mark, approved make duly erected on 3M plate and metal box with wiring connections complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-8-1 Chapter 1-8-10 Chapter 1-8-37
234Supplying and erecting modular type switch socket 16 A with indicator, ISI mark, approved make duly erected on 3M plate and metal box with wiring connections complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-8-2 Chapter 1-8-11 Chapter 1-8-37
235Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. Note: Add Rs 60/- provision of additional two modules for box and double plate CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-8-23
236Supplying and erecting ISI mark Ceiling rose / Batten holder / Slanting holder / hanging cord switch/ hanging bell push / pendent holder bakelite base 6A. erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden block/ ISI mark PVC junction box. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-7-7
237Mains: Supplying & erecting mains with 2x1.5 sq.mm.and earth wire 1.5 sq.mm FRLS PVC copper wire, in rigid PVC conduit min. 20mm dia as per specification No: WG-MA/PC, para no. 1.4.1 CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-6-2
238Supplying & erecting mains with 2x2.5 sq.mm.and earth wire 1.5 sq.mm FRLS PVC copper wire in rigid PVC conduit min. 20mm dia. as per specification No: WG-MA/PC, para no. 1.4.1 CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-6-4
239Supplying & erecting mains with 2x4 sq.mm.and earth wire 2.5sq.mm FRLS PVC copper wire in rigid PVC conduit min.20mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-6-6
240Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-3-2
241CONDUIT: Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 20 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no. 1.2.1CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-1-7
242Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no. 1.2.1CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-1-9
243Supplying and erecting rigid PVC conduit 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON, para no. 1.1.1CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-2-6
244Supplying and erecting rigid PVC conduit 25 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON, para no. 1.1.1CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-2-7
245Supplying and erecting rigid PVC conduit 32 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON, para no. 1.1.1CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-2-8
246Supplying and erecting UPVC reinforced flexible conduit 20 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. completeCSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-2-1
247Supplying and erecting PVC slotted box trunking of size 100x100 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX, para no. 1.1.2CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-2-22
248Supplying & erecting UPVC gland/ adaptor suitable for 20mm dia pvc pipe.CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-2-23
249CABLE & TERMINATION: Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-1-31
250Supplying, erecting & terminating XLPE armoured cable 3½ core 185 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-1-29
251Supplying, erecting & terminatingXLPE armoured cable 3½ core 120sq. mm. aluminiumconductor with continuous 12.97 sq. mm. (8 SWG)G.I. earth wire completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-1-27
252Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-1-21
253Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-1-20
254Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-1-18
255Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-1-17
256Supplying, erecting & terminating XLPE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-1-16
257Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/ALCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-1-16
258Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7 -2-11
259Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7 -2-10
260Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7 -2-9
261Supplying, erecting & terminating XLPE armoured cable 3 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-2-8
262Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-2-7
263Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CUCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-2-6
264Supplying, erecting & terminating PVC armoured cable 3 core 2.5 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall / trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CUCSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-2-5
265MCCB, MCB AND ACCESSORIES: Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 12 ways, on iron / G.I. frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-4-1
266Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 24 ways, on iron / G.I. frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-4-2
267Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 36 ways, on iron / G.I. frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-4-3
268Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted SP / TP of total 24 ways on iron / G.I. frame/wooden board. (Vertical Busbar type) as per specification No. SW-SWR/MCBDB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-4-5
269Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 2 ways for outgoing SPMCBs on iron/ GI frame as per specification no. SW-SWR/MCBDB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-4-14
270Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 6 ways for outgoing SPMCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-4-15
271Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 10 ways for outgoing SPMCB’s on iron/ GI frameas per specification no. SW-SWR/MCBDB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-4-16
272Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-3-2
273Supplying, erecting & marking FP MCB 6A to 32A in provided distribution board as per specification no. SW- SWR/MCB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-3-14
274Supplying, erecting & marking FP MCB 40A to 63A in provided distribution board as per specification no. SW- SWR/MCB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-3-15
275Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per Specification no. SW-RCCB/RCCB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-6-1
276Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per Specification no. SW-RCCB/RCCB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-6-2
277Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per Specification no. SW-RCCB/RCCB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-6-3
278Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/25A complete as per specification no. SW-RCCB/RCCB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-6-4
279TRAY & ACCESSORIES: Providing & erecting Hot dipped Galvanised Ladder type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-11-5
280Providing & erecting Hot dipped Galvanised Ladder type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-11-3
281Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-11-10
282Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-11-8
283Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-11-6
284PANELS: Supplying, erecting, Testing & commissioning of Main Power control panel (PCC) as per Single line diagram (AU/EL/SLD-01). NON- CSR
285PANELS: Supplying, erecting, Testing & commissioning of NON- CSR
286Supplying, erecting, Testing & commissioning of Lighting & Raw power panel (L/RP) as per Single line diagram (AU/EL/SLD-01). NON- CSR
287Supplying, erecting, Testing & commissioning of UPS output panel (UPS) as per Single line diagram (AU/EL/SLD-01). NON- CSR
288Supplying, erecting, Testing & commissioning of METER BOARD 1 & 2 panel as per Single line diagram (AU/EL/SLD-01). NON- CSR
289Supplying, erecting, Testing & commissioning of METER BOARD 3 & 4 panel as per Single line diagram (AU/EL/SLD-01). NON- CSR
290Supplying, erecting, Testing & commissioning of Fire Fighting Panel as per Single line diagram(AU/EL/SLD-01). NON- CSR
291Supplying, erecting, Testing & commissioning of Plumbing & STP PANEL as per Single line diagram(AU/EL/SLD-01). NON- CSR
292Supplying, erecting, Testing & commissioning of External Lighting feeder Pillar as per Single line diagram (AU/EL/SLD-01). NON- CSR
293Supplying, erecting, Testing & commissioning of AUDI. PANEL as per Single line diagram (AU/EL/SLD-01). NON- CSR
294Supplying, erecting, Testing & commissioning of BANQUET PANEL as per Single line diagram (AU/EL/SLD-01). NON- CSR
295Supplying, erecting, Testing & commissioning of ODU UNIT MCB BOX as per Single line diagram (AU/EL/SLD-01). NON- CSR
296LIGHT FIXTURE & FANS: Supplying and erecting LED square / circular 9 to 12W downlighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 2-5-3
297Supplying and erecting LED square / circular 16 to 20W downlighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 2-5-5
298Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED Panel light (slim edge-lit) 600X600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 2-5-11
299Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 2-5-13
300Supplying LED concealed type foot / step light with aluminium body for Indoor/ Outdoor application suitable for upto 7 W-15W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 2-5-17
301SupplyinganderectingCRCA/die-castaluminiumpowdercoatedhousingLEDpanellight(slimedge-lit) square / round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 2-5-9
302Supplying and erecting square / rectangular shaped CRCA /die-cast aluminium powder coated housing LED panel (slim edge-lit) light suitable for 25 to 32W with provision for plane front frame with translucent cover fixed to the housing complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 2-5-10
303Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no.FG-IDF/BHF CSR 19-20/DSR REPORT [Elec 18-19] Chapter 2-3-9 + Chapter 2-1-25
304Supplying & erecting T8 LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete( including lamp). CSR 19-20/DSR REPORT [Elec 18-19] Chapter 2-5-22
305Supplying and erecting regular/ standard model Ceiling fan of 1200mm. sweep complete erected in position as per specification no. FG-FN/CF CSR 19-20/DSR REPORT [Elec 18-19] Chapter 2-13-3
306Supplying and erecting 12W bracket lightpowder coated with decorative glass shade fixed on wall. Non CSR
307FIRE EXIT Signage / Enrty Signage with LED and battery back up and charger with hanging arrangement complete as required Omniexit/ ETON/Heinrich Non CSR
308Suppling and erecting Dali ballast for Auditorium lighting & Dimmer panel to control the hall lighing from projector room complete in all respect. Non CSR
309TELEPHONE, LAN AND COMPUTER ACCESSORIES: Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-8-15
310Supplying and erecting unbreakable concealed type modular switch box with double mountingplate for 1 module duly erected flush to wall with required chiseling and finishing with cement morter / POP as per required to match the background in an approved manner.CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-8-35
311Supplying & erecting telephone copper cable 2 pair with 0.5mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TWCSR 19-20/DSR REPORT [Elec 18-19] Chapter1-10-2
312Supplying & erecting telephone copper cable 10 pair with 0.5mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TWCSR 19-20/DSR REPORT [Elec 18-19] Chapter1-10-6
313Supplying & erecting Jelly filled armoured telephone cable 10 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TWCSR 19-20/DSR REPORT [Elec 18-19] Chapter1-10-14
314Supplying, erecting & commissioning Main Distribution Frame (MDF) Box 50x50 pairs as per specification No. GTWCSR 19-20/DSR REPORT [Elec 18-19] Chapter1-11-1
315Supplying, erecting & commissioning Main Distribution Frame (MDF) Box 10x10 pairsNon- CSR
316Supply, Installation, Testing and Commissioning of analog Telephone HandsetNon- CSR
317Supplying and installing, testing & commissioning of Digital (Hybrid) type EPABX of 8 x 20 (4 Digital+ 16 analog) extensions suitable upto 120 extensionsCSR 19-20/DSR REPORT [Elec 18-19] Chapter1-11-29
318Supply, Installation, Testing and Commissioning of UTP CAT-6 Outlet with Face Plate and Back boxNon- CSR
319Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NCCSR 19-20/DSR REPORT [Elec 18-19] Chapter1-12-1
320Supplying & erecting rigid steel conduit 16 SWG 25 mm dia. with necessary accessories in wall/floor with chiselling appropriatelyas per specification No: WG-MA/CC.CSR 19-20/DSR REPORT [Elec 18-19] Chapter1-1-3
321Supplying and erecting PVC ROHS complied Non flame propagating under floor ducts/ raceways of 60mm Width x 25 mm depth x 3000 mm Length including the connectors and the clamps at required intervals complete. The ducts shall be in trapezoidal shape tested for 750 N point load suitable for inscreed application. as per specification no. WG-MA/UFDCSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-2-31
322Supplying and erecting underfloor junction box of size 150mm x 150mm x 55 mm with flush finish powder coated appearance having knock outs for UPVC duct entry of size 60x25 mm width and 95x35 mm ducts complete as per specification no WG-MA/UFBCSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-2-33
323Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PPCSR 19-20/DSR REPORT [Elec 18-19] Chapter1-14-4
324Supply, Installation, Testing and Commissioning of Managed Switch for Indoor Areas - 24 Port With Power Over Ethernet (193w Max). Non- CSR
325Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG- COC/PCCSR 19-20/DSR REPORT [Elec 18-19] Chapter1-12-6
326Supplying and fixing 9U wall mount rack (Dimension-DxWxH– 450x550x500 mm) as per specification No. WG- NAS/RAKCSR 19-20/DSR REPORT [Elec 18-19] Chapter1-14-20
327CCTV CAMERA: Supply, Installation, Testing and Commissioning of Bullet Camera 2-megapixel high resolution 1920 × 1080@30fps,2.8mm/4mmfixedlensUltra-lowlightVideoCompression:Mainstream:H.265/H.264and Substream: H.265/H.264/MJPEG 3D Digital Noise Reduction IR range: 30 Mtr, IP67 Non- CSR
328Supply, Installation, Testing and Commissioning of Dome Camera 2-megapixel high resolution 1920 × 1080@30fps, 2.8mm/4 mm fixed lens Ultra-low light Video Compression: Mainstream:H.265/H.264 and Substream: H.265/H.264/MJPEG 3D Digital Noise Reduction IR range: 30 Mtr, IP68 Non- CSR
329Supply,Installation,TestingandCommissioningof32-ch1U4KNVR,Upto64channelIPcamerascanbe connected,SupportsdecodingH.265+/H.265/H.264+/H.264videoformats,Upto4Khigh-definitionliveview, storageandplayback,Upto8-ch@1080pdecodingcapacity,Upto160Mbpshighincomingbandwidth ensures IPcameras can beconnected, 1 HDMIand1 VGA interfaces: bothinterfacessupport independent video output, 2 HDDs for continuous video recording. Non- CSR
330Supply, Installation, Testing and Commissioning of 8 TB Hard disk as per required storage calculation at 30 FPS, 2 MP, 15 days backup Non- CSR
331Supply, Installation, Testing and Commissioning of Dual 32 inch full HD monitor for CCTV. Non- CSR
332Supply, Installation, Testing and Commissioning of Managed Switch for Indoor Areas - 24 Port With Power Over Ethernet (193w Max), Non- CSR
333Supplyingandfixing24portpatchpanelwithtool-lesskeystonejacksinprovidedURackcompleteasper specification no. WG-NAS/PP CSR 19-20/DSR REPORT [Elec 18-19] Chapter1-14-4
334Supplyingandfixing1meterlength,UTPpatchcordofCat6typeinpositionasperspecificationNo.WG- COC/PC CSR 19-20/DSR REPORT [Elec 18-19] Chapter1-12-6
335Supply, Installation, Testing and Commissioning of UTP Cat 6 CAT-6 Outlet with Face Plate and Back box Non- CSR
336Supplying&installingUTPnetworkingcat-6cablesuitableforLAN/WANComputernet-workingasper specification No. WG-COC/NC CSR 19-20/DSR REPORT [Elec 18-19] Chapter1-12-1
337Supplying&erectingrigidsteelconduit16SWG25mmdia.withnecessaryaccessoriesinwall/floorwith chiselling appropriatelyas per specification No: WG-MA/CC. CSR 19-20/DSR REPORT [Elec 18-19] Chapter1-1-3
338Supplying and fixing 9Uwallmount rack(Dimension-DxWxH–450x550x500 mm) as perspecificationNo. WG- NAS/RAK CSR 19-20/DSR REPORT [Elec 18-19] Chapter1-14-20
339Providing & erecting Hot dipped Galvanised Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner. CSR 19-20/DSR REPORT [Elec 18-19]Chapter 7-11-6
340Supplying and erecting PVC slotted box trunking of size 100x100 mm. with accessories on wall/ceiling. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 1-2-22
341EARTHINGS AND LIGHTNING ARRESTER: Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification No. EA-EP CSR 19-20/DSR REPORT [Elec 18-19] Chapter 9 -1-3
342Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrodeof 17.2 mmdiameter LowCarbonSteelwith250micronmolecularcopperbondedearthingrodof Length3m along with 25 kgCarbon basedenvironment friendly backfillgroundenhancing compound requiredtofill up the excavated earth with required quantity complete. Specification no. EA-MOBI CSR 19-20/DSR REPORT [Elec 18-19] Chapter 9 -1-5
343Providing earthing with Copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg of maintenance free earth conductivity enhancing mineral earthing compound complete with all materials, testing & recording the results as per specification no ESE -LA CSR 19-20/DSR REPORT [Elec 18-19] Chapter 9 -1-6
344Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 9.-2-2
345Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 9-2-3
346Supplying and erecting G. I. Earth Wire of high purity of differentsizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 9-2-5
347Supplying&erectingconventionalspiketypeairterminationsuitabletocarrylightningstrokemadeupof heavy gauge 40 mm dia copper pipe of standard length with 5 Number copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 9 -3-1
348Providing and Back filling back filling ground enhancing compound 25 kg bag complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 9 -3-2
349DWC PIPES: Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). CSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-6-7
350Supplyingandlaying(includingexcavationofsuitablewidth&depthupto90cm)50mmoutsidedia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-6-9
351Supplying and laying (including excavation) 77 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-6-10
352Supplyingandlaying(includingexcavationofsuitablewidth&depthupto90cm)120mmoutsidedia. doublewallcorrugatedpipes(DWC)ofHDPEforenclosingcablebelowground/roadsurface,torequired depth complete. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-6-12
353STAGE LIGHTING: SITC of 150W High Quality LED Parcan Light complete with, Lamp source 3200K CCT Colour temperature CRI & TLCI Values above 95 COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 3 channel control Beam Angle of 9° / 25° / 45° Total Power Consumption of 165W High quality output replacing 1000W Halogen Par Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate, Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
354SITC of 300W LED Profile Spot 19 Degree Light complete with, 3200K CCT Colour Temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI above 95 Strobe option Adjustable 1 ~ 25 times / Sec 4 Kinds of dimming curves, Black finish housing Manual Focus with 4 Beam shaping cutters Efficient and well-designed Lamp reflector Efficient Copper tube based Heat Sink for Heat Dissipation Sleek and Unique Designed Light weight body Fixture provided with Yoke of Manual Adjustment DmX 512 dimming with 1 or 3 Channel modes IP20 protection having Lux @ 3 Mtrs above 12040 suitable to illuminate the key presentor or talent on stage. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
355SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT 4x100W Chip On Board LED Lamp source COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) DmX 512 dimming with 4 /8 Channel modes CRI & TLCI Value > 90 Strobe option Adjustable 1 ~ 25 times / Sec Variable Beam Angle 30 Degree Total Power Consumption of 420W 11.7KHz Refresh Rate In built preset’s for effects Fuse and Internal safety protections Active Cooling with Low Noise Fan 5 Pin XLR for DmX High quality well designed inbuilt reflector Flicker Free 100% for Tv & Film Cameras Black finish housing, IP20 protection Having Strobe option and smooth dimming illuminate Stage with uniform light intensity levels. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
356SITC of 200W LED Fresnel Light having COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) 3200K colour temperature High quality uniquely designed Fresnel Lens CRI,TLCI and R9 value above 96 LED COB Based Source No Multiple Shadows – Single Source illumination Total Power Consumption of 210W Linear dimming 0 ~ 100% Adjustment Flicker Free for High FPS, Power AC90-260V, 50/60HZ Working Temperature - +40° ~ -30° Active Cooling with Low Noise Fan DmX & RDM Control options with latest technology Fixture provided with Yoke of Manual Adjustment Manual and DMX control Option mode through 5pin/3pin xlr Black powder coated fabricatedhousing with normal yoke. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product Make: Leksa Lighting / Kenson Solace / Aultra Lighting RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
357SITC of 18 x 10W LED Par Light RGBW, Beam Angle 25° complete withLED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) RGBW 10W Lamp source x 18 Pcs DmX 512 dimming with 8 Channel High Bright Red, Green, Blue, White LED’s Source Unlimited Color Mixing through DmX 0 ~ 100% Linear dimming In built presets for different colors Strobe Mode 20 times/Sec Data DmX through 5 Pin XLR’s 65dB ~ 130dB Sound sensing capacity Power In and Out Connections High precision colors, IP20 protection Powder coatedBlack finish housing Having Sound Control & Master Slave Auto Run Mode Illuminate theIndoor stage with unlimited colour effects Rigidly built pressure die-casted Aluminium body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
358SITC of 200W High Quality LED PC Light complete with, COB Lamp source 3200K CCT Colour temperature COB LED source from Citizen/ Philips/ Osram/ Cree or reputed make (LM80 to be provided) CRI & TLCI Values above 95 DmX 512 dimming with 5 channel control Motorised Zoom Beam angle variable from 14 Degree to 45 Degree Total Power Consumption of 210W High quality output replacing 1000W Halogen PC Light Flicker Free 100% for Tv & Film Cameras 11.7KHz Refresh Rate Linear Dimming 0 ~ 100% Fuse and Internal safety protections Strobe option Adjustable 1~25 times/Sec Variable Fixture provided with Yoke of Manual Adjustment 5 Pin XLR for DmX Black powder coated body. RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
359SITC of 180W LED CCT tuneable Light complete with CCT Tuneable Lamp source LED source from Lumiled / Seoul / Nichia or reputed make (LM80 to be provided) Having CRI TLCI Values above 95 High precision steady color No heat, DmX 512 dimming with 2 Channel Beam Angle 15°/ 25° / 45° 0 ~ 100% Smooth dimming, Powder coatedBlack finish housing Rigidly built pressure die-casted Aluminium body LED Easy view display Flicker Free for high FPS Smooth fade in and Fade out Data DmX through 5 Pin XLR’s Total Power Consumption of 180W Sound Active Mode Control IP20 protection. 65dB ~ 130dB Sound sensing capacity Power In and Out Connections RDM Control options with latest technology (RDM ID to be specified) Certification having BIS compliant to IS 10322 (Part 5/ Sec 1):2012 CE Certification compliant to EN60598-1:2015, EN61437-2-13:2014 Brand embosed impact on the light body for genuine product Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
360SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish. Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
361SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs Sleve on the rope. Carabiner Clip Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
362SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems. Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
363SITC of Fixed on stage Lighting bar/winch of 14Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
364SITC of Fixed FOH Lighting bar/winch of 15Mtr length constructed with an dual contruction light bar with an Mild Steel 40NB 48 OD black matt finish with an supporting flat patti of height 200mm x 50mm x 6mm thickness for the extra support with 2 holes of 10mm diameter to fix the cable tray on the bar.It shall be hanged from the roof to accommodate various type of stage light fittings. It should hang from the roof with MS anglewhich is suspended from the fish plate of 5mm thickness which is fixed on the rcc roof with 4 anchor fastners of 10mm which can take an total load of 400KG each fastner. Made out of 48mm Outer Dai, 40 Nominal Bore Material for the light bar shall be of Mild Steel Pipe. Dual Barrel Arrangement Powder coated with Matt black Texture Fixing Through Suspenders as per site conditions Dual Construction and an additional End Caps on the Pipe end shall be there Light bar Length shall be of customized type as per site condition. Upper pipe of dual construction is used to anchor the bar lower pipe is effectively used to hang the light fixtures Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
365SITC of Power Distribution Electrical panel having a Incomer of 100A. Floor mount / rack mount / wall mount. Miniature circuit brakers of single poles shall be fixed of different ratings from 6/10/16/25A as per the lighting fixtures.Wiring inside the module for power, control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130 All welding slag grounded off and welding pits wiped smooth with plumber metal.Power panels shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component does not attain temperature more than 40 degree Celsius.Fabricated panel shall be supported with ms angles of size 25mm x 25mm with an 1.8mm thickness sheet to hold the structure. Nuetral separation made using incomer of L&T or Schneider make, Voltmeter, Ammeter display for reading visualization Individual MCB control for 26 outgoing circuits RYB Phase indicators internally wired using IS certified wires and cables. Terminal for both incoming and outgoing cable shall be suitable for 1100 volts grade, aluminum/copper conductor PVC insulated and sheathed, armoured cable and shall be suitable for connections. Provided with ivery connectors for the internal terminations and external outgoing connecting points Custom built as per specification and project requirement. Make: Seimens / Leksa Lighting / L&T Non- CSR
366SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to +70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
367SITC of High quality power junction box 2 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20°C to +70°C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
368SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing Make: Leksa Lighting / Nuetrick / Aultra Lighting Non- CSR
369SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding Black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing Make: Leksa Lighting / Nuetrick / Aultra Lighting Non- CSR
370SITC of DmX Loop Junction Box having 1 No. of DmX 5 Pin XLR Female Socket & 1 No. DmX XLR Male Socket fitted on to a sheet metal fabricated compact Junction box powder coated with matt black texture finish paint. High temperature resistant insulator material All metal housing offers best overall RF protection & electromagnetic shielding.Clamp arrangement for fixing or Raul plug arrangement for wall /floor fixing Make: Leksa Lighting / Nuetrick / Aultra Lighting Non- CSR
371SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares Non- CSR
372SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 150 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid. Make: CustomNon- CSR
373SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm & 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid. Make: CustomNon- CSR
374SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections Make: Nuetrick / LL / Aultra Lighting Non- CSR
375SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing Make: Nuetrick / LL / Aultra LightingNon- CSR
376SITC of Digital Lighting Console with 1024 DMX channels, 1024 Channels. 10 Programmable Executors Master Fader, Keypad entry, LCD Display, Encoder Wheels Time control of scenes: Fade in/out, LTP slope Channels for each fixture 40 primary + 40 fine tune Switchable Page Scenes/Playbacks 10 Scenes to run simultaneoulsy 600 Scene step Shape generators: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus, Master slider - Global, playback, fixture USB Memory - FAT32 supported Make: Lite Puter/ Leksa Lighting/ AvoliteNon- CSR
377SITC of Opto isolated RDM enabled DmX splitter unit provided with, 8 Isolated outputs Slow blow safety fuse 5 Pin XLR for output interface Dual mode to select 2 universe operation DmX Input through 5 Pin XLR Connector Control Protocol RDM and DMX 512 Powder coated compartment finish Mounting brackets for grid mount. Make: Lite Puter/ Leksa Lighting/ Elation Non- CSR
378SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size. Make: Polycab / Walna / SBEE Non- CSR
379SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal. Make: Falcon / Belden / Guru Astronics Non- CSR
380STAGE DRAPERY: SITC of Suspender cum clamps designed made out of MS material150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid & other rigging systems. Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
381SITC of C Profile MS Hot rolled strips 3mm thick with Extra U bend used either to create basic supports Customized 40 x 50mmm, All the materials under gone through 7 tank process with various chemical treatmentto keep them rust free Makes easier to suspend all the stage machinery Duly powder coatedMatt black texture finish paint Make: Leksa Lighting / Kenson Solace / Aultra Lighting Non- CSR
382SITC of Motor Control Panel, with WIFI app base control, cum remote control 2 Way providing power input for motors internally neatly wired with contactors having individual motor control with required Push button, Emergency trip, RYB indicators, Supply Indictor and necessary meters. Wifi operated wireless smart working functianailty for the motorised lightbars should be there with one neutral & phase connection slots and with 2 vertual load terminals. For each motor unit one each switch units should be installed inside the control panels which can be controlled with our mobiles, touch pads only with the internet connection. These divice should configar with the wifi routers for getting internet access through wireless. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features Make: Seimens / Leksa Lighting / Kenson Solace Non- CSR
383SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivery connectors, necessary glands etc. Make: Leksa Lighting /Seimens / Aultra Lighting Non- CSR
384SITC of FRLS Copper unarmoured Flexible cable IS694 having 7 Core each of 1.5 Sq mm size. Make: Polycab / Walna / SBEE Non- CSR
385SITC of FRLS Copper unarmoured Flexible cable IS694 having 4 Core each of 4 Sq mm size. Make: Polycab / Walna / SBEE Non- CSR
386SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size:18.4Mtr x 6.1 Mtr. Make: Om Phile / Nexgen / Comrade Non- CSR
387SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 18.4Mtr x 6.1 Mtr. Make: Om Phile / Nexgen / Comrade Non- CSR
388SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Frills) Size: 15Mtr x 1Mtr. Make: Om Phile / Nexgen / Comrade Non- CSR
389SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 17.4Mtr x 1.2Mtr. Make: Om Phile / Nexgen / Comrade Non- CSR
390SITC of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing)6.1Mtr x 1.5Mtr Make: Om Phile / Nexgen / Comrade Non- CSR
391SITC of On Stage Fixed Frill Bar 15 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Make: Aultra Lighting / Leksa Lighting / Kenson Solace Non- CSR
392SITC of On Stage Fixed Valance Bar 17.4 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Make: Aultra Lighting / Leksa Lighting / Kenson Solace Non- CSR
393SITC of Fixed Wing Structure designed as per site condition for a height approx 6.1 Mtr x 1.5Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable. Make: Aultra Lighting / Leksa Lighting / Kenson Solace Non- CSR
394SITC of Motorized Main Curtain 18.4 Mtrs straight, Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated Make: Aultra Lighting / Leksa Lighting / Kenson Solace Non- CSR
395SITC of Motorized Rear Curtain 18.4 Mtrs straight, Centre partting as per design. This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree. The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete length Curtain holding trollies with ball bearing for smoother noiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller. Motor Cable termination box Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm Dai Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated Make: Aultra Lighting / Leksa Lighting / Kenson Solace Non- CSR
396Supplying & erecting on line UPS pure sine wave of 10 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification no. AP-UPSCSR 19-20/DSR REPORT [Elec 18-19] Chapter 3-7-7
397Supplying & erecting CRCA sheet metal one way enclosures suitable for DPMCB /TP MCB /FP MCB erected on angle iron/GI frame complete.CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-4-23
39811KV SYSTEM : Supplying and erecting approved make extendable / non-extendable Outdoor type 11 kV 630A, Load break Isolator switch on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / LBS CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-9-3
399Supplying and erecting approved make 11kV, 630A, Vacuum Circuit breaker of required rating, on provided MS channels / trench / foundation in an approved manner as per specification no SW-HTS / VCB CSR 19-20/DSR REPORT [Elec 18-19] Chapter 5-9-8
400Supplying , erecting & terminating 3 x 185 sq.mm 11 kV, XLPE(E) armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification No. CB-HT CSR 19-20/DSR REPORT [Elec 18-19] Chapter 7-3-11
401Supplying and Erecting approved make 750 kVA,3 phase, 50 c/s, Referrance Standard IS:11171 & IS 2026,Vaccum Cast Coil (VCC) Dry Type Cast Resin Transformer, Copper wound , Dyn11 Vector Group,with delta connection on HV side & star connection on LV side with additional neutral brought out on load side,For Indoor Use Continuous Duty, Average Temp rise of Winding ( at Principal Tap) 115 Deg C at Ambient Temp Max 50 Deg C & Min -5 Deg C at full load rating, Voltage rating 11/ 0.433 kV with Tapping( with off circuit Tap Links type tap changer) Tappings on Transformer For Off Load +5 to - 5% @ 2.5% in +2/-2 Steps, HV Variation, Class of Insulation H/H, Method of cooling AN, No Load Loss at Rated Voltage & Frequency (+15% IS Tol) 1.90 KW, Full Load Loss at Rated Current 6.75 KW, with 98.86 % Efficiency at Full Load & 99.05 % at 1/2 Full Load, with 75 KV peak Full Wave Lightning Impulse withstand Voltage with Complete Enclouserhaving IP 21 Degree of protection, Cable Box arrangement at HV side & Busduct at LV side ,with rating & Diagram Plate, Base Channel, Earthing Terminals & WTI Scanner with 3 PT-100 Sensors,etc. standard accessories complete with Test Certificate (as per IS:11171 ) as per specification No SS- TR.with necessary permission of Electrical Inspector. CSR 19-20/DSR REPORT [Elec 18-19] Chapter 10-1-44
402Supplying, erecting, testing and commissioning of Microprocessor Each based AMF panel suitable for Diesel Generating Set of above 320 kVA upto 500 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF. DSR REPORT [Elec 18-19] Chapter 11-2-17
403Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for Diesel Generating Set of above 180 kVA upto 200 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF. DSR REPORT [Elec 18-19] Chapter 11-2-14
404Supply of 400 KVA DG coupled to 400KVA alternator with canopy reducing the noise to 75 db at a distance of one meter as per specifications along with hot air duct from canopy to outside building as per CPCB-II norms. Base frame and DG shall have radiator. Gerb antivibration pads. Day tank/ base tank for fuel of capacity 850 Ltrs or as per standards. All lockable doors having brass handles. Front shall have perspex sheet to indicate fuel guage & ECP Panel along with one emergency push button out side canopy. Fuel piping shall be brought O/side canopy. Suitable space heater for alternators. Canopy to have required size blower for cooling as well as air combustion. (Calculation for blower shall be submitted along with drawing) Canopy temperature shall not rise beyond 70 above ambient and necessary temperature gauges will be installed.Suitable amrnded cable box for 3R x 3.5C x 240/300 sq. mm armoured XLPE cablesProvision in the canopy for taking out silenser. Suitable self priming pump with engine if available.Suitable pipe Exhaust pipe with RBS wool of min 75mm. thickness 96 Kg/ m3 density and 24 SWG Alm cladding outside. Insulation will be done in such a way that temperature surrounding it shall not exceed 7O C beyond ambient. The vendor shall carryout calculation and shall use minimum ratings given above. Supports of DG sets with piant alongwith two coats of red oxide and one coat afterward with paint as per the approved colour. Before fabricating, the contractor has to get the design approved from the Project Engineer/consultant. The exhaust structure shall be for 400KVA DG sets. NON CSR
405Supply of 125 KVA DG coupled to 125KVA alternator with canopy reducing the noise to 75 db at a distance of one meter as per specifications along with hot air duct from canopy to outside building as per CPCB-II norms. Base frame and DG shall have radiator. Gerb antivibration pads. Day tank/ base tank for fuel of capacity 850 Ltrs or as per standards. All lockable doors having brass handles. Front shall have perspex sheet to indicate fuel guage & ECP Panel along with one emergency push button out side canopy. Fuel piping shall be brought O/side canopy. Suitable space heater for alternators. Canopy to have required size blower for cooling as well as air combustion. (Calculation for blower shall be submitted along with drawing) Canopy temperature shall not rise beyond 70 above ambient and necessary temperature gauges will be installed.Suitable amrnded cable box for 3R x 3.5C x 240/300 sq. mm armoured XLPE cablesProvision in the canopy for taking out silenser. Suitable self priming pump with engine if available.Suitable pipe Exhaust pipe with RBS wool of min 75mm. thickness 96 Kg/ m3 density and 24 SWG Alm cladding outside. Insulation will be done in such a way that temperature surrounding it shall not exceed 7O C beyond ambient. The vendor shall carryout calculation and shall use minimum ratings given above. Supports of DG sets with piant alongwith two coats of red oxide and one coat afterward with paint as per the approved colour. Before fabricating, the contractor has to get the design approved from the Project Engineer/consultant. The exhaust structure shall be for 125KVA DG sets. NON CSR
406FIRE ALARM SYSTEM: Supplying and erecting testing heat detector complete on box as per specification no. FF-FAS/HDCSR 19-20/DSR REPORT [Elec 18-19] Chapter 13-9-1
407Supplying, erecting and testing optical type smoke detector complete on box as per specification No. FF-FAS/SDCSR 19-20/DSR REPORT [Elec 18-19] Chapter 13-9-2
408Supplying, erecting, testing and commissioning Manual Call Point (Pill box) with break glass push button in metal enclosure complete as per specification No. FF-FAAS/MCP CSR 19-20/DSR REPORT [Elec 18-19] Chapter 13-10-1
409Supply and erecting hooters with CRCA enclosure complete as per specification No. FF-FAAS/HTRCSR 19-20/DSR REPORT [Elec 18-19] Chapter 13-10-2
410Supplying, erecting and testing remote response indicators as per specification No. FF-FAAS/RRICSR 19-20/DSR REPORT [Elec 18-19] Chapter 13-10-3
411Supplying and erecting XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling as per specification No. CB-LT/CUCSR 19-20/DSR REPORT [Elec 18-19] Chapter 13-10-4
412Fire alarm control panel complying with BS EN 54 2 loop panel of capacity from 99 detectors & 99 modules upto 200 detector (per each loop)CSR 19-20/DSR REPORT [Elec 18-19] 27095
413HVAC/ AIR-CONDITIONING: Part-A VRV SYSTEM AIR COOLED VRV UNITS OUTDOOR UNITS (HEAT PUMP TYPE) Supplying, erecting, testing and commissioning VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (Theseitemsareto be giveninIndian rupeeswithcustomduites,inlandfrt,clearanceetconSite basis) 46 HP (20+26) Outdoor unit for : VRV/VRF ZONE - 01 CSR-2019 ,3.11.8;3.11.11
41414 HP Outdoor unit for : VRV/VRF ZONE - 02 CSR-2019 ,3.11.5
41532 HP (16+16)Outdoor unit for : VRV/VRF ZONE - 03 CSR-2019 ,3.11.6
41650 HP Outdoor unit for : VRV/VRF ZONE - 04 CSR-2019 ,3.11.10;3.11.11
417INDOOR UNITS Ductable Type Indoor Unit Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity which is specified below andhaving EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete. 2047-2295 CFM/5.5-6.36 TR CSR-2019 ,3.11.55
4182542-2825 CFM/8.0-8.02 TR CSR-2019 ,3.11.56
419Floor Mounted Horizontal Air Handling Units (FM AHU) Supply, Installation Testing and Commissioning of floor mounted AHU"s. The AHU"s shall be double skin type made of 0.80 mm thick GI sheet with 23±2mm for indoor application and 43±2 mmThickfor outdoor application PUF insulation. The Drain Pan for AHU"s shall be of SS. They shall be suitable for indoor/outdoor installation. The AHU"s selected shall be supplied withBackwarddirect driven Blower Fans suitable to deliver the undergiven CFM and Static. The AHU"s shall be DX-Type ( complete with mixing chamber if required (Optional) and electrical push buttnos. Cooling Coil)on starting panel for operating the AHU. Floor Mounted AHU 12000 CFM , 38.0 TR, 6- Row Deep cooling coil (DX CoolingCoils), 50 mm Static Pressure, with pre filter and with three phase motor for Banquet Hall
420Floor Mounted AHU 5000 CFM , 11.5 TR, 6- Row Deep cooling coil (DX CoolingCoils), 50 mm Static Pressure, with pre filter and with three phase motor for Auditorium Lobby
421Floor Mounted AHU 9500 CFM , 26.0 TR, 6- Row Deep cooling coil (DX CoolingCoils), 55 mm Static Pressure, with pre filter and with three phase motor with weather proof canopyfor Auditprium
422Centralisedcontroller for indoor units - VRV Supplying, erecting, testing and commissioning centralised programmable remote contol panel (HMI)touch manager controls minimum 16 system of minimum 64 ODU"s can be controlled and up to 992 IDU"s can be individually mounted and controlled indoor units having minimum 200 mm size colour LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangement to integrate with provided fire alarm system.CSR-2019 ,3.11.79
423Supply, installation, testing and commissioning cordless/Corded remote contol having colour LCD panel, real time clock, temperature limitation (16 to 30 degree Cent.), functions like filter clean reminder timer suitable to communicate with wired controller complete. CSR-2019 ,3.11.78
424Accessories SITC of Control cum Expansion Kit Required for the above AHU to make the system complete
425REFNUTS / Y-JOINTS Supplying and installation of high pressure grade required size copper connection Y or T- Joints / refnet for liquid and suction line complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system.CSR-2019 ,3.11.86
426REFRIGERANT PIPING Supplying, laying / fixing, testing and commissioning ofappropriate nominal refrigerant copper pipefor liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. (Note: Ref. Piping Length may be review as per site routing) 6.4 mm dia (OD) (Softdrawn) with tube thick ness 1.2 mm with 19mm thick insulation CSR-2019 ,3.11.97
4279.5 mm dia (OD) (Softdrawn) with tube thick ness 1.2 mm with 19mm thick insulation CSR-2019 ,3.11.96
42812.7 mm dia (OD) (Softdrawn) with tube thick ness 1.2 mm with 19mm thick insulation CSR-2019 ,3.11.95
42915.9 mm dia (OD) (Softdrawn) with tube thick ness 1.2 mm with 19mm thick insulation CSR-2019 ,3.11.94
43019.1 mm dia (OD) (Softdrawn) with tube thick ness 1.2 mm with 19mm thick insulation CSR-2019 ,3.11.93
43122.2 mm dia (OD) (Softdrawn) with tube thick ness 1.2 mm with 19mm thick insulation CSR-2019 ,3.11.92
43228.6 mm dia (OD) (Softdrawn) with tube thick ness 1.2 mm with 19mm thick insulation CSR-2019 ,3.11.91
43334.9 mm dia (OD) (Softdrawn) with tube thick ness 1.62 mm with 19mm thick insulation CSR-2019 ,3.11.90
43441.3 mm dia (OD) (Softdrawn) with tube thick ness 1.62 mm with 19mm thick insulation CSR-2019 ,3.11.89
435TRANSMISSION & CONTROL WIRING Supply, installation, testing, termination and commissioning of control cum transimission wiring (should be shielded cable in PVC Pipe) of 2C x 1.5 Sqmm Cu between indoor unit and out door unit and indoor units and its remote controller. 2C x 1.5 Sqmm Cu Cable or as per Manufacturer OEM
436DRAIN PIPING Providing & fixing rigid PVC piping complete with fittings, supports as per specifications and pre insulated with 6mm thick closed cell elastomeric nitrile rubber tubular insulation. 25 mm dia
437Part-B Split Air-Conditioners System (Optional for Shops/ Offices) Air-Cooled Split Hi-Wall Units Providing and fixing ofAir Cooled Split airconditioners each comprising an outdoor unit consisting of hermetic scroll/reciprocating/Rotary compressor, air cooledcondensing unit, Condenser fan etc. with outer casing and indoor fan coil unit(s) consisting of centrifugal fans, fan motor,DX coolingcoil, outer casing, filter, control and power panel with corded/cordless remote control,etc. , full charge ofrefrigerant gas and oil, M.S. base frame, supports etc. complete as per specifications anddrawings. The cost shall also include angle iron stands for outdoor units. (Servo At Main Line so stablizer not considered) 1.0 TR 4-star rating Hi-Wall Indoor unit with respective outdoor units as per specifications& Drawing for Shops (Suitable with R-410a)
4381.5 TR 4-star rating Hi-Wall Indoor unit with respective outdoor units as per specifications& Drawing for Shops (Suitable with R-410a)
4392.0 TR 4-star rating Hi-Wall Indoor unit with respective outdoor units as per specifications& Drawing for Shops (Suitable with R-410a)
440Copper piping/Control Wiring/ Power Cable for Air-Cooled Split Hi-Wall Units Supply, installation, testing & commissioning ofrefrigerant copper pipes between indoor to outdoor unit(with insulation). , cut to required length and installed with all joints , including the necessary fittings of hard copper pipe.
441Supply, Installation, Testing and Commissioning of Control cum Transmission wiring in suitable conduits between indoor & outdoor units including supply of screened wires, supports, installation , saddles,ties, tags, ferrules, lugs, nuts/bolts/hardware etc. complete in all respects as per specifications and any other item required to make the system complete.
442SITC of Power Cabling / Wiring of Condensing Units of Split Air-conditioners- from Isolators to Condensing Units, including supply of all materials complete in all respects as per specifications and any other item required to make the system complete. (Note: 2 mtr. For Each Unit)
443DRAIN PIPING Providing & fixing rigid PVC piping complete with fittings, supports as per specifications and pre insulated with 6mm thick closed cell elastomeric nitrile rubber tubular insulation. 25 mm dia
444Ventilation System Part-C Ventilation Equipments Propeller fan Supply,installation,testing and commissioning ofPropeller fan of the following capacity of approved make and specification. Fan shall be supplied with aluminum gravity louver & bird screen. 150 mmdia propeller fan,with single phase motor
445300 mmdia propeller fan,with single phase motor
446INLINE FAN : Supply, installation, testing and commissioning of circular type Inline fan of the following capacity of approved make and specification.(Cost to be inclusive ofSpeed Regulator and 1/2 hr. fire rating canvas connection and Gravity Louvers ) 700 CFM, 7-10 mm SP WG with Single phase motor
447Tube Axial Flow fans SITC of Long case Tube axial flow fans, as per specifications and approved makes suitable for three phase operation at 960/1450 RPM respectively Normal/Smoke case. Long case tube axial flow fans complete with all accessories, suitable for wall mounted /Floor Mounted/ ceiling suspended installation. The fan shall be supplied with suitable 3PH/4P/2P motor , and shall be selected for35 mm static pressure (WG), for a smoke spill duty @ 250°Cair handling temperature for 2 hours (H Class motor insulation) . All fan with fire retardent Canvas connection,bird screen and Gravity dampers (For Normal/ Smoke Extraction) Fans capacity as per below mentioned as:(As per Vent. Fan Schedule) 11500 CFM for Auditorium Smoke Extraction
44828000 CFM for Parking Normal & Smoke Extraction
4493000 CFM for Services Area Normal/Smoke Exh.
4504500 CFM for STP/Services Area Normal/Smoke Exh.
451SITC of AMCA Certified (For Air and Sound Performance) tube axial flow fan of different capacity as mentioned below in standard M.S.contruction. Entire fan model & AMCA Seal shall apear in techncial submittal of fan. All the fans are synthetic enamelled panited/hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet and fire retardent flexible connections at inlet/outlet. The electric motor coupler shall be squirrel cage induction motor (IE-3 type) confirming to IS - 325-IP - 55 with class `F" insulation.Fan efficiency should not be less than 70 %, noise level should not be more than 85 db @ 3 m distance when measured in hemisperical reverberant room conditions. Fans should be as per specification and drawings. (As per Vent. Fan Schedule ) (Makeup Air & Pressurization Fans with St. Press. of 40 mmWG/Make Up Air Fan at 30mm WG) 8000 CFM for Liftwell pressurization, 40 mm S.P.
45211500 CFM for Auditorium Make Up Air
453Evaporative air cooler(Air Washer) Supply , Install, test and commission double skin Evaporative air washer as per specifications , suitable for the following capacity given below at 75-90% efficiency of evaporative medium. The fan shall be of DIDW centrifugal construction. Packaged Type Ventilation fan sections of double skin construction as described above and in the specifications DIDW type,motor within the casing.All fans shall have multi speed motors Cost to be inclusive of unit isolator and .25HP-0.5HP water pump. Fan Motor VFD Compitable. AS PER SPEC. 6000 CFM, 3PH, 40-45 mm WG static pressure,960 rpm, 5.0 HP motor ,floor mounted with weather proof canopy
454Air Scrubber (DRY Type) DIDW FAN : Kitchen Exhaust Supply, installation, testing and commissioning of DIDW Backword curved horizontal floor mounted fan unit comprising of accurately cut scroll & side plates, heavy gauge with all welded construction, sheet steel fabricated impeller, drive with blower pulley, motor pulley, V-belts, squirrel cage motor complete as per specification (fan-motor efficiency exceeding ASHRAE 90.1-2007 Criteria). (The bidder shall submit fan performance curves for all fans). The item should be all complete in line with relevant standards, technical specifications of the standards and direction of engineer incharge. 7000 CFM/ 80 mm WG SP
455DRY SCRUBBER :Kitchen Exhaust Supply, Installation, Testing and Commissioning of Dry Scrubber comprising of extract air intake section, electrostatic precipitation technology, dry type air cleaner to remove odour, smoke and fumes from exhaust air. Electrostatic section shall be made of 16 gauge galvanised sheet,high bake epoxy powder coated, washable type aluminium mesh filters, stainless steel spiked ionizers to create high voltage DC field, Stainless Steel 316collector plates which should be alternatively charged positive and negative with large collecting area with 14" deep cell, to work as magnet for charged smoke and oil particles. Average efficiency of 95% and more in single pass as per DOP test method. Electrostatic Precipitator should be able to charge particles from 0.01 micron to 10 microns through solid state power supply. The system should be fitted with interlock switch for safety. The system should allow connection to a fan section to achieve 500 FPM velocity across the air cleaner. 7000 CFM forKitchen Exh.
456AIR CURTAIN Supply,installation testing and commissioning of AIR CURTAIN of following size as per approved make and with Door limit switch/sensor with multi speed regulator .(At ground entrance) 2100 mm long (High flow type)
457Part-D AIR DISTRIBUTION SYSTEM Site Fabricated Duct - GI Sheet Metal duct Supply,Installation,balancing and commissioning of fabricated at site GSS sheet metal ducts (rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter,vanes, hangers, Gripple supportsetc.) in accordance with the approved shop drawings and specifications , and shall also confirm to the BIS specifications.The duct shall be fabricated at site for to suit pieces. 0.63mm (24 gauge) GSS 16.12.2.1
4580.8 mm (22 gauge)GSS 16.12.2.2
4591.0mm(20 gauge)GSS16.12.2.3
4601.25mm(18 gauge)GSS 16.12.2.4
461Factory Fabricated Duct - GI duct Supply,Installation,balancing and commissioning of factory fabricated GSS sheet metal ducts (rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter,vanes, hangers, Gripple supportsetc.) in accordance with the approved shop drawings and specifications , and shall also confirm to the BIS specifications.The duct shall be fabricated at site for to suit pieces. 0.63mm (24 gauge) GSS 16.12.1.1
4620.8 mm (22 gauge)GSS 16.12.1.2
4631.0mm(20 gauge)GSS16.12.1.3
4641.25mm(18 gauge)GSS 16.12.2.4
465Grilles/Diffusers Supplying and fixing of Extruded aluminium supply and return air grilles/diffusers/louvres with dampers, supply air plenum etc. duly powder coated as per specifications and drawings. Aluminium supply air grilles with damper. 16.15
466Aluminium return air grilles without damper. 16.16
467Aluminium supply air square diffuser with damper CSR-2019 ,3.11.85
468Aluminium return/exhaust air square diffuser without damper. 16.18
469Aluminium return/exhaust airValve circular/squirell diffuser without damper. CSR-2019 ,3.11.72
470Linear air grilles (150 MM wide) CSR-2019 ,3.11.88
471GI construct supply air collar damper CSR-2019 ,3.11.87
472Jet Diffusers (315mm Dia.)
473GI Volume control dampers for ducts CSR-2019 ,3.11.80
474Fresh Air/Exhaust Air Louvers Supplying and fixing ofextruded aluminium louvres with frame bird screeen , mounting arrangement etc. as per specifications and drawings. Fresh Air/Exhaust Louvers
475MOTORIZED FIRE AND SMOKE DAMPERS Supplying, fixing, Testing and commissioning of fire dampers in suppy air duct/main branch andreturn air path as and where required of required size i/c control wiring ,the damper shall be motorized combination fire and smoke damper (spring return type) of approved make of atleast 120 minute fire rating and as per the specifications as detailed earlier in the relevant sections.The fire damper shall be complete with electronic temperature sensor and electrically operated actuator .The fire dampers shall be located in the supply/return air ducts, at all fire rated crossovers (shafts/walls etc.) The control panel will be such located that the reset can be easily done These combination smoke and fire dampers shall be interlocked with the building management system for fire detection / HVAC and shall trip/close in the event of fire / smoke in the respective zone. Bare Fire Dampers with 400 mm sleeve 16.20.1
476Control panel actuator , including Electrical,spring type actuator,remote indication of the fire damper position. 16.20.2
477Interconnecting wiring for the fire alarm system with the AHU and the smoke dampers.
478Sealing the openings around the sleeve of thefire dampers with approved fire sealant, as per the recommendations of the manufacturer and specifications.
479Supply, fabrication, installation an testing of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete. CSR-2019 ,3.11.82
480Part-E INSULATION WORKS THERMAL INSULATION SITC of Thermal insulation material for Duct insulation shall be closed cell cross linked polyethylene foam.Thermal conductivity of the insulation material shall not exceed 0.032 W/moKat an average temperature of 25oC.Density of the material shall be 25-30 Kg/m3.The product shall have temperature range of –40 oC to 105oC. The insulation material shall be fire rated for Class 1 as per BS 476 Part 6: 1989 for fire propagation test and as per BS 476 Part 7, 1987 for surface spread of flame test.Water vapour permeability as per DIN 52615 shall not exceed 0.15ng/Pa.Sec.m. 32 mm thick insulation with 2 layesr coat 7 mile cloth insulation or starbond insulation(for exposed duct)
48119 mm thick insulation CSR-2019 ,3.11.83
482ACOUSTIC LINING IN THE SUPPLY/RETURN DUCTS "Supply and Application of acoustic lining within the supply air duct Nitrile Rubber/Insusound material as per specifications and drawings. 15mmthick (For Duct)
48325mmthick (For AHU)
484Exposed Roof Insulation Supply,application of under deck insulation of roof exposed to direct sun , with Thermal insulation material for Under-deck insulation shall be closed cell cross linked polyethylene foam. Thermal conductivity of the insulation material shall not exceed 0.032 W/moK at an average temperature of 25°C. Density of the material shall be 25-30 Kg/m3. The product shall have temperature range of –40 °C to 105°C. The insulation material shall be fire rated for Class 1 as per BS 476 Part 6: 1989 for fire propagation test and as per BS 476 Part 7, 1987 for surface spread of flame test. Water vapour permeability as per DIN 52615 shall not exceed 0.15ng/Pa.Sec.m. 13 mm thick Under deck insulation as per the specifications detailed above in the section
485PLUMBING: SANITARY INSTALLATION Providing and fixing stainless steel sink of size 600x510x200mm incluidng coupling,outlet pipe, elbow and other necessary fitting, finishing etc. complete. PWD SSR 2020-21/ CSR 19-20 No.Item No. 42.78
486Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. PWD SSR 2020-21/ CSR 19-20 Item No.48.29
487providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 18 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval type wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m) PWD SSR 2020-21/ CSR 19-20 Item No.42.88
488Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. (As directed by Engineer in charge) PWD SSR 2020-21/ CSR 19-20 Item No.42.82
489Providing and fixing chromium plated towelrod 16mm dia and 75cm.in length including all accessories complete. PWD SSR 2020-21/ CSR 19-20 Item No.42.31
490Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. PWD SSR 2020-21/ CSR 19-20 Item No.42.20 BDV
491Providing and fixing toilet paper holder : C.P. brass DSR 17.34.1
492Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete PWD SSR 2020-21/ CSR 19-20 Item No.42.52 BDV
493Providing and fixing in position UPVC ultra violet stabilized 110mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete. PWD SSR 2020-21/ CSR 19-20 Item No.43.25 BDV 23
494Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) PWD SSR 2020-21/ CSR 19-20 Item No.43.17 BDV 23
495Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall, Bd.V.23 Page No. 562PWD SSR 2020-21/ CSR 19-20 Item No.41.57 BDV 23
496Providing and fixing European type wall-hung white water closet of Paryware / Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV-1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. PWD SSR 2020-21/ CSR 19-20 Item No.42.86 BDV
497Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.PWD SSR 2020-21/ CSR 19-20 Item No.42.87 BDV
498WATER SUPPLY SYSTEM Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (BD.V 5 page 551 and as directed by Engineer in charge) x Running PWD SSR 2020-21/ CSR 19-20 42.55 BDV
499Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. PWD SSR 2020-21/ CSR 19-20 Item No.42.56
500Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (BD.V 5 page 551 and as directed by Engineer in charge). PWD SSR 2020-21/ CSR 19-20 Item No.42.57 BDV5
501Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. PWD SSR 2020-21/ CSR 19-20 Item No.42.58
502Providing and fixing on walls/ ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (BD.V 5 page 551 and as directed by Engineer in charge). PWD SSR 2020-21/ CSR 19-20 Item No.42.59 BDV 5
503Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. (BD.V 5 page 551 and as directed by Engineer in charge). PWD SSR 2020-21/ CSR 19-20 Item No.42.60 BDV5
504Providing and laying in walls/ceilings/floors 80mmdia.medium grade having embossed as ISI Mark galvanised iron pipes of 8.57Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint,2 coats complete.Including necessary scaffolding and removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. PWD SSR 2020-21/ CSR 19-20 Item No.BDV 5
505Providing&fixingfull way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 10 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.PWD SSR 2020-21/ CSR 19-20 20 mm nominal bore (DSR-18.17.1A)
50625 mm nominal bore (DSR-18.17.1)
50732 mm nominal bore (DSR-18.17.2)
50840 mm nominal bore (DSR-18.17.3)
509Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure, stainlesssteel spindle,caps,including inspection charges ,transportation upto departmental store,unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.PWD SSR 2020-21/ CSR 19-20MJP-SECTION-I,Item -2 50 mm
510Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. 15 mm nominal bore. PWD SSR 2020-21/ CSR 19-20 42.83 15 mm nominal bore.(BDV 6.49.01 PM)
511Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. As directed by Engineer incharge.PWD SSR 2020-21/ CSR 19-20 42.79 BDV 15 mm nominal bore (18.53.1)
512DRAINAGE: Providing and supplying ISI mark C.I. S&S pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S.specification inclusive cost of jointing materials(Rubber gasket of EPDM Quality) excluding GST levied by GoI and GoM in all respect, Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work,unloading, stacking etc. completed as directed by Engineer –in-charge (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition / revision with amendments for Rubber Gaskets. MJP-SECTION-I,Item -1, Class `NP-II" ( For 2.00 m. length ) 150 mm dia.
513250 mm dia.
514Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and air tight with 75 mm thick R.C.C. cover medium duty 140 kg etc. complete. (Bd.V.43 Page No. 574) 42.17 BDV
515Providing and constructing on sewer, B.B. masonry circular manhole with concentric cone 1.2 M dia. at bottom and 0.5 M dia. at top and upto a depth of 2.00 M with 23 cm brick work in CM 1:4 proportion excluding excavation including foundation concrete 250 mm thick and haunches and channels in C.C. 1:2:4 proportion, finishing channels in smooth rendering, providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4 coping and providing and fixing approved make and quality S.F.R.C. frame and cover of 56 cm dia. etc. complete as directed by Engineer-in-charge. MJP-Section - I - XX, Chambers, manholes drainage drops)-ITEM NO-6
516Providing, hoisting and fixing in position C.I. manhole, frame and cover of best quality and of required size and shape with locking arrangements including applying 2 coats of anti-corrosive paint, etc. complete. MJP-SECTION-Section - K, Ancilary items for Reservoirs-ITEM NO 4 90 x 60 cm size and weight 35 kg.
517Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. (Bd.V.38, Page No. 572) 42.02 BDV 38
518RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge. SSR-48.47
519Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level. Item No.48.48
520Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well-casing pipe of 150mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge. Item No.48.49
521Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well screen pipes with ribs of 100mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge. Item No.48.50
522Supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of Engineerin-charge. Item No.48.51
523Supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. Item No.48.52
524Supplying, filling, spreading & leveling coarse fine aggregate (crushed sand VSI grade finely washed etc.) of size range 1.5mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge. Item No.48.53
525Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel: fine/ medium/ coarse, in required grading & sizes as per the actual requirement, all complete as per direction of Engineer in charge. Item No.48.54
526ConventionalWaterTreatment Plant Designing(aesthetically),providing, constructingandcommissioning ConventionalWaterTreatmentPlant consistingofallCivil,Mechanicaland Electricalworksincludingcostof providingandapplyingepoxypaintto insidesurfaceofwaterretaining structuresincontactwithchlorineand providinganti-termitetreatmenttoentire structure below ground level, mechanical and electrical components of various sub- worksasgivenbelow,including necessary hydraulic testing, structural testing,equipmenttesting andtrialrun for a period of 3 months, etc. complete as directedby Engineer-in-charge(turn-key job). MJP-Section - I - XVII, Treatment Plant - WTP / STP-ITEM NO -2 (Including All Items) Upto 5 MLD
527Sewage Treatment Plant (STP) Primary treatment - with extended sludge drying beds (Oxidation Ponds) Designing(aesthetically),providing, constructing and giving satisfactory trials of modernised Sewage Treatment Plantconsistingofreceivingchamber, screen chamber, gritchamber, measuringflume,distributionchamber withprimaryandsecondarytreatment, etc. as detailed below, administration blockofsuitablesizeincludingallied units for waste disposal with all civil and mechanical works involved, etc. complete (turn key job). MJP-Section - I - XVII, Treatment Plant - WTP / STP-ITEM NO-04 (Including All Items) Upto 10 MLD
528Designing(aesthetically),providing, constructingandgivingsatisfactory hydraulic testing, commissioning and givingsatisfactorytrialsofmodernised SewageTreatmentPlantconsistingof inletchamber,screenchamber,detritus tanks,parshallflume,primarysettling tanks, aeration tanks, secondary settling tanks,sludgesumpandpumphouse, sludgethickener,primarydigester, secondary digester, SST sump and pump house,chlorinecontacttank, chlorinators, chlorinator room, sump cum blendingtank,PSTsludgesumpcum blending tank, pump house, sludge centrifuge,gasholder,necessarypiping work with required valves, gates, drains, pathways, administrative building cum laboratory,laboratoryequipments,tools and plants, spare parts, etc. complete as turnkey job withall involvedcivil, electrical and mechanical works inclusive offollowingitems,unitsasperdetailed specification for civil, electrical and mechanicalcomponentswithallduties and taxes, etc. complete. Primary and secondary treatment-with digesters, sludge drying beds etc. complete. (Including All Items) Upto 10 MLD
529FIRE FIGHTING: SUB HEAD -I (EQUIPMENT) 13.1 Main Fire Pumps (Single Stage Centrifugal) (FF-MFP/SSC) Supplying, installing, testingand commissioning with perfect aligning, properlevelling offireservice main single stage pump, of2400 LPM at 76 m head centrifugal type, 75 HP (55 kW) 3 phase, 415 volt, 50Hz or of suitable HP complete asper specification no. FF-MFP/SSC CSR 19-20 No.13-1-3
53013.3Jockey Pumps (Centrifugal) (FF-MFP/JP): Supplying, installing, testingand commissioning with perfect aligning, properlevelling ofjockey pump of 240 LPM at 56 m head, 15 HP (11 kW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages asper specification no. FF-MFP/JP CSR 19-20 No.13-3-1
53113.4 Booster Pump (FF-MFP/BP): Supplying, installing, testingand commissioning with perfect aligning, properlevelling ofbooster pump of 900 LPM at 40 m Head, 12.5 HP (10 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages asper specification no. FF-MFCSR 19-20 No.13-4-4
532SUB HEAD -II (Hydrants, Sprinkler, Piping & Accessories) 13.5 Pipes (FF-PP) Supplying, laying, fixing, testing and commissioning of following sizes (NB) of ISI marked heavy class M.S. pipes including cutting, threading, welding etc. and providing all fittings e.g. elbows,reducers, clamps, hangers, flanges, gaskets, nuts, bolts andwashers etc. including painting of pipes and fittings with red paint over a coat of ready mixed primer, both of approved quality and shade including cutting holes and chases in brick orRCC walls/slabs and making good the same etc. complete in all respect as required.(Make-Jindal Hisar) Supplying and erectingG.I. pipe above ground of ‘C’ class ERW of size 200 mm dia with necessary fittings complete asper specification no. FF-PP CSR 19-20 No.13-5-8
533Supplying and erectingG.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete asper specification no. FF-PP CSR 19-20 No.13-5-7
534Supplying and erectingG.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete asper specification no. FF-PP CSR 19-20 No.13-5-6
535Supplying and erectingG.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete asper specification no. FF-PP CSR 19-20 No.13-5-5
536Supplying and erectingG.I. pipe above ground of ‘C’ class ERW of size 65 mm dia with necessary fittings complete asper specification no. FF-PP CSR 19-20 No.13-5-4
537Supplying and erectingG.I. pipe above ground of ‘C’ class ERW of size 50 mm dia with necessary fittings complete asper specification no. FF-PP CSR 19-20 No.13-5-3
53840 mm dia (As per MR)
53932 mm dia (As per MR)
540Supplying and erectingG.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete asper specification no. FF-PP CSR 19-20 No.13-5-2
541End Line Strainer (positive suction) (ELS) Supplying anderecting150 mm dia end line strainerforpositive suction complete asper specification no. FF-VL/ELS CSR 19-20 No.13-6-8
542Supplying anderecting75/80 mm dia end line strainerforpositive suction completeasper specification no. FF-VL/ELS CSR 19-20 No.13-6-6
543Non Return Valves (NRV) Supplying and erecting cast iron double flange ball type NRV of size 75/80 mm dia complete asper specification no. FF-VL/NRV CSR 19-20 No.13-6-23
544Supplying and erecting cast iron double flange ball type NRV of size 150 mm dia complete asper specification no. FF-VL/NRV CSR 19-20 No.13-6-25
545Supplying and erecting cast iron double flange ball type NRV of size 200 mm dia complete asper specification no. FF-VL/NRV CSR 19-20 No.13-6-26
546Butterfly Valves (BFV) Supplying & erecting cast iron double flange butterfly valve of size 200 mm dia. complete asper specification no. FF-VL/BFV CSR 19-20 No.13-6-18
547Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete asper specification no. FF-VL/BFV CSR 19-20 No.13-6-17
548Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete asper specification no. FF-VL/BFV CSR 19-20 No.13-6-16
549Supplying & erecting cast iron double flange butterfly valve of size 75/80 mm dia. complete asper specification no. FF-VL/BFV CSR 19-20 No.13-6-15
550Supplying & erecting cast iron double flange butterfly valve of size 65 mm dia. complete asper specification no. FF-VL/BFV CSR 19-20 No.13-6-14
551Hydrant Valves (HV) Supplying anderectingstainless steel single outlethydrantvalve fitted with necessary accessories complete asper specification no. FF-VL/HV CSR 19-20 No.13-6-31
552Hose Pipes Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m inlength, fitted with necessary accessories complete asper specification no. FF-FFA/RRL CSR 19-20 No.13-7-4
553Hose Reel with Drum (HR) Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose)fitted with necessary accessories complete asper specification no. FF-FFA/HV CSR 19-20 No.13-7-2
554Nozzles (NZ) Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzlecomplete as per specifications no. FF-FFA/NZ CSR 19-20 No.13-7-8
555Fire Brigade Connection (FBC) Supplying and erecting fire brigade header of 150 mm dia, for supplying water in fire tank complete asper specification no. FF-FA/FBC CSR 19-20 No.13-7-10
556Siamese Connection (SMC) Supplying and erecting fire brigade header (Siamese connection) of 150 mm dia for supplying water to wet riser system complete asper specification no. FF-FFA/SMC CSR 19-20 No.13-7-11
557Air Cushion Tank (Air Vessel) (ACT) Supplying and installing air vessel of 300 mm dia 1.5min heightM.S.tank installedinsidepump house / on terrace complete asper specification no. FF-FFA/ACTCSR 19-20 No.13-7-12
558Air Release Valve (ARV) Supplying anderecting20/25mm dia gun metal air release cock, with necessary G.I.coupling to be fitted on top of air vessel or on wet riser complete asper specification no. FF-FFA/ARV CSR 19-20 No.13-7-13
559Pressure Switch(PS) Supplying and installing pressureswitchwith 12/15 mm dia isolationvalve,G.I. nipple, elbow, etc complete asper specification no. FF-FFA/PS CSR 19-20 No.13-7-15
560Pressure Gauge (PG) Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete asper specification no. FF-FFA/PG CSR 19-20 No.13-7-14
561Supplying,erecting, testing and commissioningvane type waterflow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branchlines of 75/80 mm dia having following features 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4) Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes19-20CSR 19-20 No.13-10-2
562Providing & Fixing testing & commissioning of installtion control valve of cast iron body and brass/bronze working parts comprising of water motor alarm. Bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the Wet riser/ sprinkler System activates, pressure gauges, emergency release,strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required sizem flanges, orifice plate, gasket etc. of size 150mm dia as required. (As per MR)
563Supplying,erecting, testing and commissioning of 15 mm (½") dia. NBCMBodychromefinished quartzoid bulb sprinkler having 68º C fixedtemperaturerating with deflector disc of conventional construction complete asper specification no. FF-SPRCSR 19-20 No.13-10-1
564Supplying and erecting M.S./CRCA cabinetfor housingFloorHydrant valve,hosepipe,hosereeland branch pipe(size 1000 x 736 x 736mm.)madefrom16SWG sheetandangle iron 25 x 25 x 4 mm. having front doors with viewingglass(8"x6") andlocking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.CSR 19-20 No.13-7-20
565Supplying and erecting M.S./CRCA cabinet forhousingFireBrigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet andangleiron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") andlocking arrangement with necessaryfixing material such as rubber bidding etc. duly painted in post box red colour.CSR 19-20 No.13-7-19
566Fabricating, supplying, installation, testing and commissioning of electrical control panel of cubical construction,floor mounted type , fabricated from2 mm thick CRCA sheet compartmentalisedwith hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatrment process,cable alley,inter connection, having switchgears and accessories mounting and internal wiring, earth terminals numbering etc complete in all respect ,suitable for operation on 415 V ,3 phase,50 Hz AC supply with enclosure protection class IP 42 as reqd Designing, Supply, Installation, Testing andCommissioning of System controller to control operation of Main Electric Fire Pump, Diesel Pump, Pressurisation Pump in sequence as per specification consisting of relays, timers, sensors, annunciation window for fault indication, complete as per specification. (As per MR) (Including All Items)
567SUB HEAD - III(FIRE EXTINGUISHERS & MISC) Providing and fixing withbracket/supportsetc. wall mounted fire extinguishers as per detail below: Providing and fixing water based CO2 type extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charges. (As Per MR) Capacity 9 lit.
568Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle ISI marked as per IS:15683 including fixing with dash fasteners etc. complete. (As per MR) Capacity 6 KgABC TYPE
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail