}

Repair/Maint Of Pumping Machinery , Maint And Cleaning Of Swimming Pool , Filtration Plant , Ug Sumps And Oh Tanks , Servicing Of Chloronome Plants , Dg Sets , Eot Crane , And Allied Works At Mirc Under Ge ( S ) Ahmednagar, AHMEDNAGAR-Maharashtra

Military Engineer Services-MES has published Repair/Maint Of Pumping Machinery , Maint And Cleaning Of Swimming Pool , Filtration Plant , Ug Sumps And Oh Tanks , Servicing Of Chloronome Plants , Dg Sets , Eot Crane , And Allied Works At Mirc Under Ge ( S ) Ahmednagar. Submission Date for this Tender is 09-08-2021. Cranes Tenders in AHMEDNAGAR Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

28117473
Corrigendum : Repair/Maint Of Pumping Machinery , Maint And Cleaning Of Swimming Pool , Filtration Plant , Ug Sumps And Oh Tanks , Servicing Of Chloronome Plants , Dg Sets , Eot Crane , And Allied Works At Mirc Under Ge ( S ) Ahmednagar
Open Tender
Indian
Maharashtra
AHMEDNAGAR
09-08-2021

Tender Details

Repair/Maint Of Pumping Machinery , Maint And Cleaning Of Swimming Pool , Filtration Plant , Ug Sumps And Oh Tanks , Servicing Of Chloronome Plants , Dg Sets , Eot Crane , And Allied Works At Mirc Under Ge ( S ) Ahmednagar

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 17-Jun-2021 8800Datepostponed Date 12-07-2021
2 26-Jun-2021 8800datepostpond Date 15-07-2021
3 15-Jul-2021 8800Datepostponed03 Date 02-08-2021
4 02-Aug-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 09-08-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 60000.0 /-
Tender Value
INR 30 Lakhs /-

BOQ Items

Name of Work : REPAIR/MAINT OF PUMPING MACHINERY, MAINT AND CLEANING OF SWIMMING POOL, FILTRATION PLANT, UG SUMPS AND OH TANKS, SERVICING OF CHLORONOME PLANTS, DG SETS, EOT CRANE, AND ALLIED WORKS AT MIRC UNDER GE (S) AHMEDNAGAR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dewatering, cleaning of OH reservoir, 200000 Gallons (RCC), 60' staging, inside MIRC complex near Gate No.3, with high pressure jet to remove all mosses, algae, dirt, deposits and other sediments, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including , sterilizing the complete internal surface of the tank by using ISI mark Gd I bleaching powder / Liquid Chlorine, wash with fresh water, drying up, applying one coat of anti-fungal Cement Paint on internal surface incl marking / writing the words on external wall at visible place ''Military Engineer Services, Tank Capacity & Date of Cleaning'' using synthetic enamel paint in white colour over black background and letters of height 50 mm height and 40 mm width complete all as specified and as directed. 1 Each Job
2 2 All as per serial item No 1 above but OH reservoir 100000 Gallons (RCC), 60' staging, inside MIRC at Golf Ground near JCO's MD Accns 1 Each Job
3 3 All as per serial item No 1 above but OH reservoir 50000 Gallons (RCC), 60' staging, inside PH complex near Gate No. 3 at MIRC 1 Each Job
4 4 All as per serial item No 1 above but OH reservoir 50000 Gallons (RCC), inside MIRC at MAP PH2 1 Each Job
5 5 All as per serial item No 1 above but OH reservoir 27500 Gallons (RCC), 60' staging, inside MIRC at MAP near OR's MD Accns 1 Each Job
6 6 All as per serial item No 1 above but OH reservoir 20000 Gallons (RCC), 45' staging, near Harpal Stadium at MIRC 1 Each Job
7 7 All as per serial item No 1 above but OH reservoir 10000 Gallons (Steel), 40' staging, inside PH complex near Gate No. 3 at MIRC 1 Each Job
8 8 All as per serial item No 1 above but semi UG Sump 300000 gallons (RCC), Cylindrical Curved Roof, inside PH complex near Gate No. 3 at MIRC 1 Each Job
9 9 All as per serial item No 1 above but semi UG Sump 100000 gallons (RCC), Cuboids, inside PH complex near Gate No. 3 at MIRC 1 Each Job
10 10 All as per serial item No 1 above but semi UG Sump 27500 Gallons (RCC), Cuboids, inside PH complex near Gate No. 3 at MIRC 1 Each Job
11 11 Taking LT shutdown, dismantle and remove the submersible suction sweeper 2HP, 415 V, 2750RPM, Make Modi, Model B-200, Pump set from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing coupling,replacing the bearings, reassembling and installing back at it's original position aligning, testing and commissioning on full load for 8 hrs continuous running all as specified and as directed. Note : Taking down old submersible cable and connection with new cable is included in this item. 2 Each Job
12 12 Supply only 2.5 Sqmm, 4 core, 1100 Volts grade, submersible flexible cable with multistranded copper conductor, PVC insulated and overall PVC sheathed all as specified and as directed. 100 Rm
13 13 Supply only nylon braided UPVC flexible hose pipe, heavy grade, 50mm outer dia with two nose clips all as specified and as directed. Make: Finolex 100 Rm
14 14 Supply only PVC cylindrical pool float ball plastic type, high density, double hook, suitable for sustaining hose & cable above water during suction sweeping all as specified and as directed. 30 Each
15 15 Supply only nylon rope 20 mm dia, best quality for operation of suction sweeper all as specified and as directed. 20 Kg
16 16 Supply only nylon brushes (700 x 100mm) as per and suitable for Submersible Suction Sweeper , 2HP, Make Modi, Model B-200, best quality all as specified and as directed. 5 Each
17 17 Supply and provide with manufacturer's test certificate, Rubber Matting conforming to IS, 1100 Volts grade of size 2.0m x 1.0m and 10mm thick , ISI marked all as specified and as directed. 10 Each
18 18 S&F star coupling, heavy duty, Styrene Butadiene Rubber suitable for 20/25/30/50/75 HP pump or motor, including taking down old unserviceable star coupling all as specified & directed. 12 Each Set
19 19 Taking LT shutdown, dismantle and remove the 50 HP electric motor of the mono block / coupled pump set from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing star bush coupling,replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified and as directed 2 Each Job
20 20 All as per serial item 19 here-in-before but 25 HP 4 Each Job
21 21 All as per serial item 19 here-in-before but 10 HP 2 Each Job
22 22 All as per serial item 19 here-in-before but 7.5 HP 1 Each Job
23 23 All as per serial item 19 here-in-before but 1 HP Air Compressor Motor 1 Each Job
24 24 S&F in repairs, CI impeller for 50 HP pumps all as specified and as directed. 2 Each
25 25 S&F in repairs, bearing for 50 HP pumps all as specified and as directed. 4 Each
26 26 S&F in repairs, bearing end plate for 50 HP pumps all as specified and as directed. 6 Each
27 27 S&F in repairs, MS shaft for 50 HP pumps all as specified and as directed. 2 Each
28 28 S&F in repairs, MS coupling for 50 HP pumps all as specified and as directed. 2 Each
29 29 S&F in repairs, Seal for 50 HP pumps all as specified and as directed. 4 Each
30 30 S&F in repairs, Motor fan for 50 HP pumps all as specified and as directed. 1 Each
31 31 S&F in repairs, Bush for 50 HP pumps all as specified and as directed. 4 Each
32 32 S&F in repairs, CI impeller for 25 HP pumps all as specified and as directed. 2 Each
33 33 S&F in repairs, bearing for 25 HP pumps all as specified and as directed. 8 Each
34 34 S&F in repairs, bearing end plate for 25 HP pumps all as specified and as directed. 6 Each
35 35 S&F in repairs, MS shaft for 25 HP pumps all as specified and as directed. 2 Each
36 36 S&F in repairs, MS coupling for 25 HP pumps all as specified and as directed. 2 Each
37 37 S&F in repairs, Seal for 25 HP pumps all as specified and as directed. 4 Each
38 38 S&F in repairs, Motor fan for 25 HP pumps all as specified and as directed. 1 Each
39 39 S&F in repairs, Bush for 25 HP pumps all as specified and as directed. 4 Each
40 40 S&F in repairs, CI impeller for 10 HP pumps all as specified and as directed. 2 Each
41 41 S&F in repairs, bearing for 10 HP pumps all as specified and as directed. 4 Each
42 42 S&F in repairs, bearing end plate for 10 HP pumps all as specified and as directed. 4 Each
43 43 S&F in repairs, MS shaft for 10 HP pumps all as specified and as directed. 2 Each
44 44 S&F in repairs, MS coupling for 10 HP pumps all as specified and as directed. 2 Each
45 45 S&F in repairs, Seal for 10 HP pumps all as specified and as directed. 4 Each
46 46 S&F in repairs, Motor fan for 10 HP pumps all as specified and as directed. 1 Each
47 47 S&F in repairs, Bush for 10 HP pumps all as specified and as directed. 4 Each
48 48 S&F in repairs, CI impeller for 7.5 HP pumps all as specified and as directed. 1 Each
49 49 S&F in repairs, bearing for 7.5 HP pumps all as specified and as directed. 2 Each
50 50 S&F in repairs, bearing end plate for 7.5 HP pumps all as specified and as directed. 4 Each
51 51 S&F in repairs, MS shaft for 7.5 HP pumps all as specified and as directed. 1 Each
52 52 S&F in repairs, MS coupling for 7.5 HP pumps all as specified and as directed. 1 Each
53 53 S&F in repairs, Seal for 7.5 HP pumps all as specified and as directed. 4 Each
54 54 S&F in repairs, Motor fan for 7.5 HP pumps all as specified and as directed. 1 Each
55 55 S&F in repairs, Bush for 7.5 HP pumps all as specified and as directed. 4 Each
56 56 S&F in repairs, bearing for 1 HP pumps all as specified and as directed. 2 Each
57 57 S&F in repairs, bearing end plate for 1 HP pumps all as specified and as directed. 6 Each
58 58 S&F in repairs, Seal for 1 HP pumps all as specified and as directed. 4 Each
59 59 S&F in repairs, Motor fan for 1 HP pumps all as specified and as directed. 1 Each
60 60 S&F in repairs, Bush for 1 HP pumps all as specified and as directed. 4 Each
61 61 Taking out submersible pump/deep borewell set, single phase, 1.5/3/5 HP with tripod & chain pully block, shifting to authorized workshop for the repair work, removing the burnt winding and impeller, re-winding the motor with super enamelled copper wire and replace uservicable impeller of the size equivalent and same, refix and put into bore well all as specified and as directed. 3 Each Job
62 62 Taking LT shutdown, dismantle and remove 10 HP electric motor of the mono block / coupled mud pump set from existing foundation / position (Including drain out sewage water from sump through honey sucking machine) shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enamelled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing star bush coupling,replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified and as directed. 4 Each Job
63 63 S&F in repairs, single phase DOL starter and all components suitable for 1.5/3/5HP submersible pump set all as specified and as directed. 3 Each
64 64 S&F in repairs, three phase DOL starter and all components suitable for 1.5/3/5 HP submersible pump set all as specified and as directed. 3 Each
65 65 S&F in repairs, single phase/three phase preventer suitable for fully automatic Star / Delta starter or Direct - on - Line starter all as specified and as directed. 5 Each
66 66 S&F in repairs, fully automatic Star / Delta starter in sheet metal enclosure with single phase/three phase protection feature (Motor Rating AC - 3 Duty, 415V, 50Hz, 3Ph) suitable for 25 HP pump set having relay range 20 - 33 Amps all as specified and as directed. 2 Each
67 67 S&F in repairs, three phase DOL starter and all components suitable for 10 HP motor, having relay range 9 - 15 Amps all as specified and as directed. 1 Each
68 68 S&F in repairs, pressure gauge, stem with dual dial type, 0 - 7Kg / Sqcm and 0 - 100 Lb / Sq inch all as specified and as directed. 7 Each
69 69 Overhauling / Servicing of heavy duty steel, horizontal, cylindrical type, pressure media filter having capacity of 60000 GPH of Make: GD Malhotra, by opening up the two manhole covers, removing the complete filter media (different size stone pebbles and quartz sand) from the chamber to a safe place at outside, cleaning the internal surface by scrubbing with steel wire brush, high pressure water jet to remove all scales, mosses, algae, dirt, deposits and other sediments thoroughly and removal of dirty water by flushing out through drain system and sterilizing the complete internal surface of the filter tank using lime wash / liquid chlorine, loosen the threading and remove 36Nos x 1Mtr long, 50mm dia PVC porous pipe from the GI Tee equals placed at bottom centre of the filter chamber and replace it with CPVC pipe , replace the corroded GI Tee Equals complete all as specified and as directed. 2 Each Job
70 70 Drying up the internal surface of the filter tank, preparing surface using suitable sand paper, remove the corrosion completely, filling the cavities or holes by welding /soldering including all extra material/mild steel plate used for welding purpose, smoothening the surface, applying two coats of finishing black bituminous paint over a coat of anti-corrosive metal primer and pressure testing after all welding/soldering process check completely after full on load and filling completely with water and material complete all as specified and as directed. 2 Each Job
71 71 Supply only CPVC pipe, SDR13.5, 50mm outer dia, 1Mtr long , duly drilled holes, one end with threaded adaptor and other end closed with suitable cap all as specified and as directed. 12 Each
72 72 Labour only for refilling the filter chamber for a height of 75mm with graded white quartz (Pebbles) of size 50 to 60mm by cleaning, wash thoroughly in fresh water after a rubbing wash in lime soda ash solution etc complete all as specified and as directed. 2 Each Job
73 73 All as per serial item No 72 here-in-before but with 25 - 40mm size for a height of 10cm 2 Each Job
74 74 All as per serial item No 72 here-in-before but with 15 - 20mm size for a height of 10cm 2 Each Job
75 75 All as per serial item No 72 here-in-before but with 06 - 12.5mm size for a height of 20cm 2 Each Job
76 76 All as per serial item No 72 here-in-before but with 03 - 05mm size for a height of 20cm 2 Each Job
77 77 All as per serial item No 72 here-in-before but with graded white quartz coarse sand of grade 1.5 - 2.5mm for a height of 20cm 2 Each Job
78 78 All as per serial item No 72 here-in-before but with 0.50 - 1.4mm size for a height of 40cm 2 Each Job
79 79 Supply only graded white quartz coarse sand of grade 1.5 - 2.5mm all as specified and as directed. 2 Cum
80 80 Supply only graded white quartz coarse sand of grade 0.50 - 1.4mm all as specified and as directed. 2 Cum
81 81 Labour only for dewatering/emptying the swimming pool (L - 50m, W - 21m, Shallow end D - 1m and Deep end D - 1.8m), Diving pool (L - 50m, W - 21m, D - 4.8m), including scum channel, connecting channel, supply duct etc., take out the grills of man holes, remove all mosses, algae, dirt, deposits, sediments and sludge. scrub and clean wall / floor / scum channel tiles with nylon wire brush, remove dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance, wash entire swimming / diving pool, including scum channel, connecting channel, supply duct etc with lime soda ash solution / hydrochloride acid, sterilize the complete internal surface with liquid chlorine, wash with fresh water, drying up, complete all as specified and as directed. 1 Each Job
82 82 Labour only for dewatering/emptying the balancing tank and water cascade, removing all mosses, algae, dirt, deposits, sediments and sludge, scrubbing of internal surface with steel wire brush and removal of dirty water with sludge machines / industrial vacuum cleaners and disposal of the same to a safe distance including sterilizing the complete internal surface of the tank / cascade by using ISI mark Gd I bleaching powder / liquid chlorine, wash with fresh water, drying up, material and labour for applying one coat of anti-fungal paint on internal surface and one coat of exterior emulsion weather coat paint on external surface complete all as specified and as directed. 1 Each Job
83 83 Labour only for filling the swimming pool / diving pool / balancing tank with fresh water, operating the filter media pump set, carrying out back washing of filter media, aerating by operating air blower, suction sweeping of swimming pool at various stages of filling with water after adding chemicals, carryout the filtration of pool water for 8Hrs continuously, carryout PH test and ppm test of pool water complete all as specified and as directed. 1 Each Job
84 84 Supply only chlorine gas in 100/50 kg cylinder including disconnection and reconnection at site as directed by Engineer-in-charge.\nNote \n(i):All safety precations to be taken to avoid gas leakage \n(ii) Rate quoted deemed to include rent for cylinder\n 3000 Kg
85 85 Supply only calcium based chlorine granular form chlorine contain 60-65% all as specified and as directed. Make : Aqua fit/ Sathya Sai Cal GP / Decliback Altoch-GP. 1125 Kg
86 86 Supply only soda ash all as specified and as directed. 800 Kg
87 87 Supply only non ferric alum all as specified and as directed. 800 Kg
88 88 Supply only copper sulphate all as specified and as directed. 400 Kg
89 89 Supply only cationic polyelectrolyte liquid 12% chlorine all as specified and as directed. \n Make : OCEAN CHEMICALS pune or equivalent as approved by GE. 1000 Litre
90 90 Supply only sodium hypochloride liquid 12% chlorine all as specified and as directed. \n Make : OCEAN CHEMICALS pune or equivalent as approved by GE. 900 Litre
91 91 Supply only roundup chemical for in liquid form for cleaning purpose of pump house all as specified and as directed. 10 Litre
92 92 Repairs and servicing of chloronome plant gaseas type 200gms/hour capacity located at pump house near Gate No. 3, MIRC :- 01 No. all as directed by the Engineer-in-Charge. \nNote : (i) The servicing is to be carried out monthly. (ii) The rates for the following items is inclusive of attending immediately the chloronome plants as & when required at site to stop leakages and to be repaired immediately\n(iii) Servicing to be carried out through authorised representive. 9 Each Job
93 93 All as per serial item No 92 here-in-before but located at swimming pool MIRC :- 01 No. 9 Each Job
94 94 All as per serial item No 92 here-in-before but located at Map Phase 2 pump house at Gate No. 3 MIRC - 01 No. 9 Each Job
95 95 S&F in repairs, moisture trap/ glass NRV as per Part No SSAPS-1004 for chloronome plant all as specified and as directed. 2 Each
96 96 Supply only cylinder key, Part No SPAS 1025 for chloronome plant all as specified and as directed. 2 Each
97 97 S&F in repairs, chlorine flow meter up to 1 Kg / hr SSAPS-1033 for chloronome plant all as specified and as directed. 2 Each
98 98 S&F in repairs, chlorine mixing chamber Part No SSPAS 1010 for chloronome plant all as specified and as directed. 2 Each
99 99 S&F in repairs, primary filter for chloronome plant as existing at site and all as specified and as directed. 2 Each
100 100 S&F in repairs, secondary filter for chloronome plant as existing at site and all as specified and as directed. 2 Each
101 101 S&F in repairs, safety loop 'U' bend for chloronome plant as existing at site and all as specified and as directed. 6 Each
102 102 S&F in repairs, PP diaphragm valve for water inlet and outlet of dia 15mm for chloronome plant all as specified and as directed. 4 Each
103 103 S&F in repairs, teflon pipe for chlorine gas cylinder for chloronome plant as per existing size all as specified and as directed. 20 Rm
104 104 S&F in repairs, heavy duty PVC pipe for chlorine solution outlet of dia 20mm for chloronome plant all as specified and as directed. 40 Rm
105 105 Supply only ammonia solution for checking of chlorine gas leakages and plants in 500ml bottles all as specified and as directed. \nMake : NICE/Glaxo. 2 Each \nBottel
106 106 Supply only water testing kit including litmas papers and chemical all as specified and as directed. 2 Each
107 107 Taking down carefully existing unservicable electric water level Indicator from OH Tank / UG Sump and repairing the same by replacing nodes, sensor, service cable, existing MCB, monitor etc as required and proper fixing arrangements all as specified and as directed. 6 Each Job
108 108 Preparation of surfaces of pumps, motors, NRVs, sluice valves and connected pipeline with sumps, ladder and motor etc installed at MIRC pump house in all 4 rooms of pump house, removing the corosion completely using suitable sand paper, filling the cavities or holes by welding / soldering as required, smoothening the surface and M&L for applying two coats of blue synthetic enamel paint over a coat of anti-corrosive metal primer complete all as specified and as directed. 10 Each Job
109 109 M&L in repairs for coupling protection / guard cover fabricated out of 3 mm thick MS sheet cover fixed with flat iron 40 X 6 mm all around iron frame work with fixing arragement complete and duly painted with two coats of anti-corrosive bituminous paint over a coat of anti-corrosive bituminous primer complete all as specified and as directed . 50 Kg
110 110 S&F in repairs, Notice board of size 1500 mm x 1200 mm made of white laminated board having aluminium frame alround and two/four hooks on back/top for hanging complete all as specified and as directed. 2 Job
111 111 Cleaning of area around installations 3 m (max) including cutting and dressing of the existing vegitation (small trees/bushes/plants/grass,etc) of all type and all sizes wherever required for the clear approche to the installation and the work alignment of area completeall as specified and as directed. 1500 Sqm
112 112 M&L for preparation of exposed old plastered or unplastered surfaces of underground sump, 300000 gallons (RCC), Cylindrical Curved Roof, inside PH complex near Gate No. 3 at MIRC and applying one coat of cement base paint, colour as approved by GE and painting a square portion of 1 m X 0.5 m with black synthetic enamel paint and writing letters on it with white paint i.e. Capacity, date of cleaning, location etc. with suitable size of letters all as specified and as directed . 1 Job
113 113 All as per serial item No 112 here-in-before but underground sump, 100000 gallons (RCC), Cuboids, inside PH complex near Gate No. 3 at MIRC. 1 Job
114 114 All as per serial item No 112 here-in-before but underground sump, 27500 Gallons (RCC), Cuboids, inside PH complex near Gate No. 3 at MIRC 1 Job
115 115 All as per serial item No 112 here-in-before but overhead tank 200000 Gallons (RCC), 60' staging, inside MIRC complex near Gate No.3 1 Each Job
116 116 All as per serial item No 112 here-in-before but overhead tank 100000 Gallons (RCC), 60' staging, inside MIRC at Golf Ground near JCO's MD Accns 1 Each Job
117 117 All as per serial item No 112 here-in-before but overhead tank 27500 Gallons (RCC), 60' staging, inside MIRC at MAP near OR's MD Accns 1 Each Job
118 118 All as per serial item No 112 here-in-before but overhead tank 50000 Gallons (RCC), 60' staging, inside PH complex near Gate No. 3 at MIRC 1 Each Job
119 119 All as per serial item No 112 here-in-before but overhead tank 20000 Gallons (RCC), 45' staging, near Harpal Stadium at MIRC 1 Each Job
120 120 All as per serial item No 112 here-in-before but steel surfaces of overhead tank 10000 Gallons (Steel), 40' staging, inside PH complex near Gate No. 3 at MIRC 1 Each Job
121 121 All as per serial item No 112 here-in-before but overhead tank 50000 Gallons (RCC), inside MIRC at MAP PH2 1 Each Job
122 122 M&L in repairs for LT Panel wiring with new wiring using new cables of same size as per approved makes given here-in-after including replacement of lugs, thimbles etc complete all as specified and as directed . 2 Job
123 123 M&L in repairs for LT Pannel CT coils as per exiting size and make complete all as specified and as directed . 2 Each
124 124 M&L in repairs for R Y B phase indicators complete set of make as per existing complete all as specified and as directed . 2 set of 3
125 125 S&F in repairs for LED street light fitting with aluminium housing , heat resistance toughened glass & IP66 protection 60W , connecting using 2.5 Sqmm PVC insulated (Unsheathed) single core cable, 1100V grade with multistranded Aluminium conductor (Upto 8.0 Rm double run), brackets made out of 40mm bore GI pipe, medium grede, 1.5 m long, bend to shape and including suitable MS clamps made out of 40 x 6mm flat iron, necessary bolts, nuts, washers etc complete and painting the bracket and clamps with 2 coats of synthetic enamel paint over a coat of red oxide Zinc chromate primer & 2.5 Sqmm Service cable connected from junction box to street lights all as specified and as directed. MAKE: Havells Cat No : ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent in HPL /Crompton / Phillips / Halonix / Century LED 8 Each
126 126 M & L in repairs for earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion all as specified and as directed. 8 Each set
127 127 Supply, laying and testing in repairs, XLPE cable of size 2 core 10 Sqmm, insulated, screened, PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) with stranded aluminium conductor all as specified and as directed. 100 Rm
128 128 Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe or for shafts, wells cesspits,man holes, sluice valves etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed. 83 Cum
129 129 Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed. 72 Cum
130 130 Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed. 11 Cum
131 131 M&L for 80 mm bore cast iron pipe with spigot and socket ends, centrifugally cast, class LA, suitable for rubber gasket joint, conforming to IS: 1536-1976, ISI marked, in any length, laid in trenches pressure testing, washing out complete including dismantling, taking out old corroded pipe line including all fittings complete all as specified and as directed. 12 Rm
132 132 All as per serial item No 131 here-in-before but 100 mm bore 12 Rm
133 133 All as per serial item No 131 here-in-before but 150 mm bore 12 Rm
134 134 All as per serial item No 131 here-in-before but 200 mm bore 12 Rm
135 135 All as per serial item No 131 here-in-before but 250 mm bore 12 Rm
136 136 All as per serial item No 131 here-in-before but 300 mm bore 12 Rm
137 137 M&L for 15 mm bore GI tubing, medium grade, laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling, taking out old corroded pipe complete all as specified and as directed. 50 Rm
138 138 All as per serial item No 137 here-in-before but 20 mm bore 50 Rm
139 139 All as per serial item No 137 here-in-before but 25 mm bore 50 Rm
140 140 All as per serial item No 137 here-in-before but 40 mm bore 50 Rm
141 141 All as per serial item No 137 here-in-before but 50 mm bore 30 Rm
142 142 All as per serial item No 137 here-in-before but 80 mm bore 30 Rm
143 143 S&F in repairs, ML6/ML4/ML2 starter timer of suitable/existing capacity for 50/25 HP Pump set starter 415/440 V 50 Hz all as specified and as directed. 5 Each
144 144 S&F in repairs, on load change over switch 415 Volts in sheet metal enclosures three phase four pole 63 Amps capacity, fixed in replacement complete all as specified and as directed. 1 Each
145 145 S&F in repairs, on load change over switch 415 Volts in sheet metal enclosures three phase four pole 100 Amps capacity, fixed in replacement complete all as specified and as directed. 1 Each
146 146 S&F in repairs, on load change over switch 415 Volts in sheet metal enclosures three phase four pole 200 Amps capacity, fixed in replacement complete all as specified and as directed. 1 Each
147 147 S&F in repairs, DOL starter in sheet steel encloser WP 3 phase 440 volts 50Hz MU G -11 Model fixed to angle iron stand 1.00 mtr above ground level grouted 45 cm in grounf with PCC 1:2:4 type B1 complete all as specified and directed. 1 Each
148 148 S&F in repairs, MCB 16 Amps, 3 pole, 50 Hz 415 Volts, adjustable type with rupturing capacity 36 KA complete all as specified and directed. 1 Each
149 149 S&F in repairs, MCB 63 Amps, 3 pole, 50 Hz 415 Volts, adjustable type with rupturing capacity 36 KA complete all as specified and directed. 1 Each
150 150 S&F in repairs, MCCB 63 Amps, 3 pole, 50 Hz 415 Volts, adjustable type with rupturing capacity 36 KA complete all as specified and as directed. 2 Each
151 151 S&F in repairs, MCCB 100 Amps, 4 pole, 50 Hz 415 Volts, adjustable type with rupturing capacity 36 KA complete all as specified and as directed. 1 Each
152 152 S&F in repairs, MCCB 125 Amps, 3 pole, 50 Hz 415 Volts, adjustable type with rupturing capacity 36 KA complete all as specified and as directed. 1 Each
153 153 S&F in repairs, MCCB 160 Amps, 4 pole, 50 Hz 415 Volts, adjustable type with rupturing capacity 36 KA complete all as specified and as directed. 1 Each
154 154 S&F in repairs, MCB 63 Amps, 4 pole, 50 Hz 415 Volts, adjustable type with rupturing capacity 25 KA complete all as specified and as directed. 2 Each
155 155 Inspection, maintenance and servicing of DG set, 125 KVA, Make KIRLOSKAR, Model 6 SL 9088T including alternator, electric panel board connection to DG Set for routine check ('A' check) of DG set for smooth functioning and carriying out maintenance as under :- Monthly Service \n(a) Checking engine oil level and topping up as and when required NOTE : Oil shall be measured and paid separately \n(b) Checking and adjusting the belt for tension and replacemnt of belt NOTE: Belt shall be measured and paid separately \n(c) Checking of oil bath air cleaner level \n (d) Checking of exhaust system for leakage \n (e) Draining of sediment from fuel filter and fuel tank (f) Cleaning of air cleaner element. Note : Replacement of Air Cleaner shall be measured and paid separately. \n (g) Checking engine alternator coupling, mounting bolts and alignment. (h) Tighting all nut, bolts, in alternator terminal block. \n (j) Checking of alternator carbon brush and connections in alternator (k) Checking and tighting of all connection in DC control wiring. \n(l) Checking of all radiator rubber hose and replacement if required.\nNOTE : Hose pipes shall be measured and paid separately \n (m) Checking and recording oil pressure, water and oil temperature(n) Checking anti vibration mounting and replacement if required. \nNOTE: Anti vibration pad shall be measured and paid separately. \n (n) Checking throttle linkage \n (o) Checking battery for cell test, electrolyte level, gravity and topping up to required level \n (p) Routine check / repair work of panel, switch, MCCB, main switch, all contactor, engine control unit. 9 Per Month
156 156 All as per serial item No.155 here-in-before but for 100 KVA DG set Make KIRLOSKAR Model 6 SL 9088T/Model no. KG100W52 9 Per Month
157 157 All as per serial item No.155 here-in-before but for 82.5 KVA DG set Make CUMMINS 9 Per Month
158 158 All as per serial item No.155 here-in-before but for 40 KVA DG set Make KIRLOSKAR, ASHOK LEYLAND MODEL NO. ALGPW04DMK1.E4 18 Per Month
159 159 Material and labour required for `B' CHECK inspection, maintenance, servicing of DG set 125 KVA, Make KIRLOSKAR, Model 6 SL 9088T, including items covered in `B' check of DG set for smooth functioning and carriying out maintenance complete as per OEM instructions and as directed under :- \n (a) Repeat the activities of 'A' check \n (b) Replacing lubricant oil Note:- Lub Oil are Paid separately. (c) Replacing lubricant oil filter element with `O' ring \n(d) Replacing fuel filter element \n(e) Replacing coolant \n(f) Replacing Governer oil \nNOTES : \n(i) `B' CHECK ONCE IN SIX MONTH OR 250 HRS RUNNING OF DG SET WHICHEVER IS EARLIER \nii) `B' check kit, coolant shall be measured and paid seperately under relevant item.\niii) Lubricant oil shall be measured and paid separately under relevant item. 1 Each Job
160 160 All as per serial item No.159 here-in-before but for 100 KVA DG set Make KIRLOSKAR Model 6 SL 9088T/Model no. KG100W52 1 Each Job
161 161 All as per serial item No.159 here-in-before but for 82.5 KVA DG set Make CUMMINS 1 Each Job
162 162 All as per serial item No.159 here-in-before but for 40 KVA DG set Make KIRLOSKAR, ASHOK LEYLAND MODEL NO. ALGPW04DMK1.E4 2 Each Job
163 163 Supply only B' Check Kit for125 KVA DG set Make KIRLOSKAR Model 6 SL 9088T all as specified and as directed.\nNote : Quoted rate shall be included for oil filter (1.00 Ltr/0.5 ltr), diesel filter , by pass element etc. 1 Each Set
164 164 All as per serial item No.163 here-in-before but for 100 KVA DG set Make KIRLOSKAR Model 6 SL 9088T/Model no. KG100W52 1 Each Set
165 165 All as per serial item No.163 here-in-before but for 82.5 KVA DG set Make CUMMINS 1 Each Set
166 166 All as per serial item No.163 here-in-before but for 40 KVA DG set Make KIRLOSKAR, ASHOK LEYLAND MODEL NO. ALGPW04DMK1.E4 2 Each Set
167 167 Disconnecting all the connections from alternator of DG Set of Capacity 125 KVA DG set Make: KIRLOSKAR Model 6 SL 9088T, removing the alternator from foundations , transporting to workshop, dismaintling completely including starter, roter, removing rotor and bearing, cleaning all the parts with thinner and varnishing completely with F class varnishing, applying expoxy coating, rewinding & reassembling, dynamically balancing the alternator transporting and fixing on frame and reallignment within tolerance limit , connecting the alternator with all connections and testing on load completely all as specified and as directed. 1 Each Job
168 168 All as per serisl item No. 167 here-in-before but for 100 KVA DG set Make KIRLOSKAR Model 6 SL 9088T/Model KG100W52 1 Each Job
169 169 All as per serisl item No.167 here-in-before but for 82.5 KVA DG set Make CUMMINS 1 Each Job
170 170 All as per serisl item No. 167 here-in-before but for 40 KVA DG set Make KIRLOSKAR, ASHOK LEYLAND MODEL NO. ALGPW04DMK1.E4 2 Each Job
171 171 M&L in repairs, air filter inner of DG Sets of capacity 100 KVA Make KIRLOSKAR Model 6 SL 9088T/Model KG100W52 including connecting and testing all as specified and as directed. 1 Each Set
172 172 All as per serial item No 171 here-in-before but air filter assembly 1 Each
173 173 All as per serial item No 171 here-in-before but batterty Lead 1 Each Set
174 174 All as per serial item No 171 here-in-before but battery terminals 1 Each Set
175 175 All as per serial item No 171 here-in-before but V belt 1 Each Set
176 176 All as per serial item No 171 here-in-before but engine RPM Cum Hrs Meter 1 Each
177 177 All as per serial item No 171 here-in-before but oil Seal 1 Each
178 178 All as per serial item No 171 here-in-before but Binjo bolt for pipe 1 Each
179 179 M&L in repairs, air filter inner of DG Sets of capacity 125 KVA, Make KIRLOSKAR Model 6 SL 9088T including connecting and testing all as specified and as directed. 1 Each Set
180 180 All as per serial item No 179 here-in-before but air filter assembly 1 Each
181 181 All as per serial item No 179 here-in-before but batterty Lead 1 Each Set
182 182 All as per serial item No 179 here-in-before but battery terminals 1 Each Set
183 183 All as per serial item No 179 here-in-before but V belt 1 Each Set
184 184 All as per serial item No 179 here-in-before but engine RPM Cum Hrs Meter 1 Each
185 185 All as per serial item No 179 here-in-before but oil Seal 1 Each
186 186 All as per serial item No 179 here-in-before but Binjo bolt for pipe 1 Each
187 187 M&L in repairs, air filter inner of DG Sets of capacity 82.5 KVA DG set Make CUMMINS including connecting and testing all as specified and directed. 1 Each Set
188 188 All as per serial item No 187 here-in-before but V belt 1 Each Set
189 189 All as per serial item No 187 here-in-before but batterty Lead 1 Each Set
190 190 All as per serial item No 187 here-in-before but battery terminals 1 Each Set
191 191 All as per serial item No 187 here-in-before but frequency meter. 1 Each
192 192 All as per serial item No 187 here-in-before but hose pipe set 1 Each
193 193 All as per serial item No 187 here-in-before but battery Charger alternator 1 Each
194 194 All as per serial item No 187 here-in-before but air filter assembly 1 Each
195 195 All as per serial item No 187 here-in-before but piston set with piston ring 1 Each
196 196 All as per serial item No 187 here-in-before but radiator core assembly 1 Each
197 197 M&L in repairs, air filter inner of DG Sets of capacity 40 KVA DG set Make KIRLOSKAR, ASHOK LEYLAND MODEL NO. ALGPW04DMK1.E4 including connecting and testing all as specified and as directed. 2 Each Set
198 198 All as per serial item No 197 here-in-before but V belt 2 Each Set
199 199 All as per serial item No 197 here-in-before but batterty Lead 2 Each Set
200 200 All as per serial item No 197 here-in-before but battery terminals 2 Each Set
201 201 All as per serial item No 197 here-in-before but frequency meter. 2 Each
202 202 All as per serial item No 197 here-in-before but hose pipe set 2 Each
203 203 All as per serial item No 197 here-in-before but battery Charger alternator 2 Each
204 204 All as per serial item No 197 here-in-before but air filter assembly 2 Each
205 205 All as per serial item No 197 here-in-before but piston set with piston ring 2 Each
206 206 All as per serial item No 197 here-in-before but radiator core assembly 2 Each
207 207 Comprehensive repair and maintenance of class II indoor duty double girder EOT cranes each of capacity of 5 Ton, installed in buildings located within in area of approx 10 Sq Km (MIRC AREA) Note : Maintenance cost of each crane comprises of the following:- (i) Cost of tradesman and helper. (ii) Cost of Petty repairs and consumables such as cotton waste, 'K' Oil, Grease, , Nuts, Bolts washer etc. (iii) Cost of labour for fixing all the components, which needs replacement. (iv) Cost of labour for weekly, monthly, quarterly and annual maintenance in addition to other instructions given in Maintenance and operational manual of the manufacturer. 9 Per job per month
208 208 Taking LT shutdown, dismantle and remove the EOT crane set, 5 Ton capacity, from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying, gear oil,power contactors,breaks,steel ropes and spare kits and the cost of motor parts/ equpments etc etc, replacing star bush coupling,replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous runningall as specified and as directed. 1 Job
209 209 S&F in repairs, power contactor, 30 Amp, 440 Volts with 110 volt coil for 5 Ton capacity EOT crane all as specified and as directed. 9 Each
210 210 S&F in repairs, power contactor, 70 Amp, 440 Volts with 110 volt coil for 5 Ton capacity EOT crane all as specified and as directed. 3 Each
211 211 S&F in repairs, spare kit unit suitable for power contactor, 30 Amp, 440 Volts with 110 volt coil for 5 Ton capacity EOT crane all as specified and as directed. \nMake: BCH/L&T/ Siemens/ Telemech/CG. 9 Each
212 212 S&F in repairs, spare kit unit suitable for power contactor,70Amp, 440 Volts with 110 volt coil for 5 Ton capacity EOT crane all as specified and as directed. \nMake: BCH/L&T/ Siemens/ Telemech/CG. 6 Each
213 213 S&F in repairs, hooter suitable for EOT crane, 5 Ton capacity, flame proof of same size as exisiting with the crane all as specified and as directed. 2 Each
214 214 S&F in repairs, push button switches ON and Off inside the pandente/ panel board of 5 Ton EOT crane all as specified and as directed.\nMake:- L&T/Standard/Siemens / Legrand. 2 Each
215 215 S&F in repairs, bimetalic overload relays, suitable for power contactor, 30 Amp, 440 Volts with 110/230/440 volt coil all as specified and as directed. 6 Each
216 216 S&F in repairs, bimetalic overload relays, suitable for power contactor, 70 Amp, 440 Volts with 110/230/440 volt coil all as specified and as directed. 6 Each
217 217 S&F in repairs, flexible copper cable PVC insulated multi stranded of size 4 core 6 sqmm 1100 Volts grade ,ISI Marked complete all as specified and as directed. 40 Rm
218 218 S&F in repairs, flexible copper cable PVC insulated multi stranded of size 4 core 4 sqmm 1100 Volts grade, ISI Marked complete all as specified and as directed. 80 Rm
219 219 S&F in repairs, wheel with pin shaft all as specified and as directed. 2 Each
220 220 S&F in repairs, ball bearing (Bearing No-6207) all as specified and as directed. 20 Each
221 221 S&F in repairs, MS gear for wheel all as specified and as directed. 1 Set of two
222 222 S&F in repairs, steel wire rope multi stranded 10mm dia all as specified and as directed. \nMake Usha Martin 10 Rm
223 223 S&F in repairs, PVC coated & PVC Insulated copper conductor multistranded of size 10 sqmm 4 core all as specified and as directed. 30 Rm
224 224 S&F in repairs, HRC fuse link 32 amps as per site requirement all as specified and as directed. 6 Rm
225 225 S&F in repairs, gear box oil EP -230 all as specified and as directed. 40 Litre
226 226 S&F in repairs, brake oil all as specified and as directed. 20 Litre
227 227 S&F in repairs, brake shoe of 150mm dia all as specified and as directed. 2 Set
228 228 S&F in repairs, magnetic coil all as specified and as directed all as specified and as directed. 4 Each
229 229 S&F in repairs, Limit switch, 3 phase, 415 volt, 50 Hz as per site requirement all as specified and as directed. 3 Each
230 230 S&F in repairs, four pole contactor, AC three phase, 415volt Amps as per Site requirement all as specified and as directed. 4 Each
231 231 S&F in repairs, carbon brushes for clutch for micro movement of EOT Crane all as specified and as directed. 30 Each
232 232 S&F in repairs, current collector complete as per existing for EOT Crane of different capacity of EOT Crane all as specified and as directed. 2 Each
233 233 Supply only engine oil 15 W 40 of approved and standard in seal packed containers all as specified and as directed. \nMake : Servo/ BPL/IOC/ Castrol 500 Litre
234 234 Supply only coolant of approved and standard make, K cool Supper plus 50-50 Premix in seal packed containers all as specified and as directed. 400 Litre
235 235 Supply only battery water with electrolyte mix all as specified and as directed. 300 Litre
236 236 Taking LT shutdown, dismantle and remove the 5 HP motor blower set capacity 185 m3/hr, from existing foundation / position, shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator slots, re-winding the motor/blower with super enameled copper wire of the size equivalent to the original winding including insulated packing materials, varnishing, heating, drying etc, replacing star bush coupling,replacing the bearings, reassembling and installing back at it's original position, aligning, testing and commissioning on full load for 8 hrs continuous running all as specified and as directed. 2 Each
237 237 All as per serial item No 236 here-in-before but FMR/submersible pump set 5 HP capacity. 2 Each
238 238 All as per serial item No 236 here-in-before but feed pump set 1 HP capacity. 1 Job
239 239 Taking LT shutdown, dismantle and remove the screw press sludge machine set from existing foundation / position, shifting to authorized workshop for the repair work, removing the plates, clean and fix with new if any plate and accessories break or burnt, complete greasing, oiling for smooth functioning. After complete the repair work, refix and re-position the machine with all connection of pipes and accessories complete all as specified and as directed. 1 Job
240 240 Dismantle lamina box on existing foundation and clean and refix lamina box after repair of foundation as per ground position all as specified and as directed. 1 Job
241 241 Supply only bio-culture suitable for sewage treatment plant and develope bio-culture till making of sludge in sludge bag feed pump all as specified and as directed. \nNote:- Rate quoted shall be deemed to Include testing with Govt. Lab. Inlet/Outlet parameter as per Maharashtra State Public Health Services. State Public Health Laboratory, Pune. \nINLET PARAMETER (a) pH : 7.5 (b) BOD : 250 mg/l (c) COD : 450 mg/l (d) Suspended Solids : 200 mg/l (e) Oil & Grease : 20 mg/l OUTLET PARAMETER (a) pH : 6.0-9.0 (b) 3 days BOD @ 27deg C : <100 mg/l (c) COD : <250 mg/l (d) Suspended Solids : <50 mg/l (e) Oil & Grease : <10 mg/l (f) Res Chlorine : > 1.0 mg/l (g) E-Coli : <1000 counts/100 ml 200 Litre
242 242 Supply only Moving Bed Biofilm Reactor (MBBR) to cover the higher surface area ranging from 200-500 m2/m3 all as specified and as directed. 4 Cum
243 243 Supply only sludge bags, capacity 12.5 kg/batch X 2 batches per day for collect sludge/cakes from /screw press sludge machine all as specified and as directed. \nMake: Auric/Sabari/Serve India 100 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail