Drinking Water And Sanitation Department has published Construction Of Additional Class Rooms And Mini Auditorium Building At Govt . Degree College Sitarganj ( Udham Singh Nagar ). Submission Date for this Tender is 05-07-2021. Building Work Tenders in SITARGANJ Uttarakhand. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 22-Jun-2021 | Corrigendum | Technical Bid | 28-06-2021 |
2 | 28-Jun-2021 | Corrigendum Key Date | Date | 05-07-2021 |
Name of Work: CONSTRUCTION OF ADDITIONAL CLASS ROOMS AND MINI AUDITORIUM BUILDING AT GOVT. DEGREE COLLEGE SITARGANJ (UDHAM SINGH NAGAR) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. DSR Item 2.8.1 | BI01010001010000000000000515BI0100001113 | 998 | Cum. |
2 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. DSR Item 2.25 | BI01010001010000000000000515BI0100001114 | 699 | Cum. |
3 | 3 | Supply and filling in area with good earth, banking earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with road roller of minimum 8 tonnes and filling up ground depressions, lead upto 50 m and lift upto 1.5 m including royalty and upto 5 kms. cartage. DSR Item 1.1.2+2.8.1 | BI01010001010000000000000515BI0100001115 | 964 | Cum. |
4 | 4 | Diluting and injecting chemical emulsion for anti-termite treatment :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration DSR Item 2.35.3.1 | BI01010001010000000000000515BI0100001116 | 1428 | Sqm |
5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) DSR Item 4.1.8 | BI01010001010000000000000515BI0100001117 | 218 | Cum. |
6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). DSR Item 4.1.3 | BI01010001010000000000000515BI0100001118 | 8 | Cum. |
7 | 7 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). DSR Item 4.2.3 | BI01010001010000000000000515BI0100001119 | 3 | Cum. |
8 | 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) DSR Item 5.1.2 | BI01010001010000000000000515BI0100001120 | 226 | Cum. |
9 | 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) \nDSR Item 5.2.2 | BI01010001010000000000000515BI0100001121 | 432 | Cum. |
10 | 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars DSR Item 5.22.6 | BI01010001010000000000000515BI0100001122 | 748 | Qtl. |
11 | 11 | Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete DSR Item 5.9.1 | BI01010001010000000000000515BI0100001123 | 259 | Sqm |
12 | 12 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Lintels, beams, suspended floors, roof slab, T-beams, landings, balconies, projections etc. DSR Item 5.9.3 | BI01010001010000000000000515BI0100001124 | 4082 | Sqm |
13 | 13 | Providing and laying water proofing treatment on Plinth beams, roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured. DSR Item 22.6 | BI01010001010000000000000515BI0100001125 | 532 | Sqm |
14 | 14 | Providing and laying of 1mm thick polythene over RCC plinthbeams for water proofing treatment including all materials labour T&P complete. NSI | BI01010001010000000000000515BI0100001126 | 109 | Sqm |
15 | 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) DSR Item 6.1.2 | BI01010001010000000000000515BI0100001127 | 105 | Cum |
16 | 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) DSR Item 6.4.2 | BI01010001010000000000000515BI0100001128 | 423 | Cum |
17 | 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) DSR Item 6.13.2 | BI01010001010000000000000515BI0100001129 | 197 | Sqm |
18 | 18 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. DSR Item 6.15 | BI01010001010000000000000515BI0100001130 | 197 | Sqm |
19 | 19 | Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand). DSR Item 6.23 | BI01010001010000000000000515BI0100001131 | 48 | Sqm |
20 | 20 | Supplying and filling in plinth with sand / river bed material under floors, including watering, ramming, consolidating and dressing complete. \nDSR Item 2.27 | BI01010001010000000000000515BI0100001132 | 461 | Cum. |
21 | 21 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb DSR Item 10.14.1.1 | BI01010001010000000000000515BI0100001133 | 503 | Meter |
22 | 22 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb DSR Item 10.14.3.1 | BI01010001010000000000000515BI0100001134 | 923 | Meter |
23 | 23 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) DSR Item 10.11.1 | BI01010001010000000000000515BI0100001135 | 2448 | Kg |
24 | 24 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates, grills and similar works. DSR Item 10.25.2 | BI01010001010000000000000515BI0100001136 | 4107 | Kg |
25 | 25 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube. DSR Item 10.26.1 | BI01010001010000000000000515BI0100001137 | 618 | Kg. |
26 | 26 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR Item 10.28 | BI01010001010000000000000515BI0100001138 | 94 | Kg |
27 | 27 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. DSR Item 10.3 | BI01010001010000000000000515BI0100001139 | 11 | Sqm |
28 | 28 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR Item 10.2 | BI01010001010000000000000515BI0100001140 | 12998 | Kg |
29 | 29 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m². DSR Item 12.1.1 | BI01010001010000000000000515BI0100001141 | 513 | Sqm |
30 | 30 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m². DSR Item 12.4.1 | BI01010001010000000000000515BI0100001142 | 28 | Mtr |
31 | 31 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m². DSR Item 12.7.1 | BI01010001010000000000000515BI0100001143 | 56 | Mtr |
32 | 32 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. DSR Item 12.52.4 | BI01010001010000000000000515BI0100001144 | 580 | Sqm |
33 | 33 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) DSR Item 13.16.1 | BI01010001010000000000000515BI0100001145 | 1628 | Sqm |
34 | 34 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) DSR Item 13.1.2 | BI01010001010000000000000515BI0100001146 | 4106 | Sqm |
35 | 35 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) DSR Item 13.2.2 | BI01010001010000000000000515BI0100001147 | 1498 | Sqm |
36 | 36 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) DSR Item 13.7.2 | BI01010001010000000000000515BI0100001148 | 670 | Sqm |
37 | 37 | Providing and laying vitrified floor tiles in floor / dado of different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. DSR Item 11.41.2 | BI01010001010000000000000515BI0100001149 | 1878 | Sqm |
38 | 38 | Marble stone flooring / dado with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Udaipur green marble. DSR Item 11.23.5 | BI01010001010000000000000515BI0100001150 | 90 | Sqm |
39 | 39 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, dado and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm. DSR Item 8.2.2.2 | BI01010001010000000000000515BI0100001151 | 298 | Sqm |
40 | 40 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work. DSR Item 8.3.1 | BI01010001010000000000000515BI0100001152 | 56 | Meter |
41 | 41 | Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. DSR Item 8.3.2 | BI01010001010000000000000515BI0100001153 | 204 | Meter |
42 | 42 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR Item 8.31 | BI01010001010000000000000515BI0100001154 | 149 | Sqm |
43 | 43 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. DSR Item 11.37 | BI01010001010000000000000515BI0100001155 | 41 | Sqm |
44 | 44 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. DSR Item 12.20 | BI01010001010000000000000515BI0100001156 | 34 | Sqm |
45 | 45 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. DSR Item 11.3.1 | BI01010001010000000000000515BI0100001157 | 218 | Sqm |
46 | 46 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. DSR Item 11.13.1 | BI01010001010000000000000515BI0100001158 | 272 | Mtr |
47 | 47 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. DSR Item 16.91.2 | BI01010001010000000000000515BI0100001159 | 118 | Sqm |
48 | 48 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR Item 9.21.1 | BI01010001010000000000000515BI0100001160 | 78 | Sqm |
49 | 49 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size including all oxide fittings complete, Second class teak wood. DSR Item 9.27.1.1.1 | BI01010001010000000000000515BI0100001161 | 4 | Sqm |
50 | 50 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes. DSR Item 10.30.2 | BI01010001010000000000000515BI0100001162 | 206 | Sqm |
51 | 51 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading. DSR Item 9.51.2 | BI01010001010000000000000515BI0100001163 | 195 | Sqm |
52 | 52 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) DSR Item 21.1.2.2 | BI01010001010000000000000515BI0100001164 | 54 | Kg |
53 | 53 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness. DSR Item 21.3.2 | BI01010001010000000000000515BI0100001165 | 12 | Sqm |
54 | 54 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on both sides. DSR Item 21.2.2 | BI01010001010000000000000515BI0100001166 | 4 | Sqm |
55 | 55 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness. DSR Item 21.4.1 | BI01010001010000000000000515BI0100001167 | 4 | Each |
56 | 56 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm. DSR Item 9.96.1 | BI01010001010000000000000515BI0100001168 | 30 | Each |
57 | 57 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm. DSR Item 9.96.2 | BI01010001010000000000000515BI0100001169 | 50 | Each |
58 | 58 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm. DSR Item 9.100.1 | BI01010001010000000000000515BI0100001170 | 196 | Each |
59 | 59 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm. DSR Item 9.97.2 | BI01010001010000000000000515BI0100001171 | 88 | Each |
60 | 60 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm. DSR Item 9.97.4 | BI01010001010000000000000515BI0100001172 | 52 | Each |
61 | 61 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper. DSR Item 9.101.2 | BI01010001010000000000000515BI0100001173 | 98 | Each |
62 | 62 | Providing and fixing of door silencer to required colour or shade, with necessary screws etc. complete : NSI | BI01010001010000000000000515BI0100001174 | 98 | Each |
63 | 63 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR Item 9.83 | BI01010001010000000000000515BI0100001175 | 6 | Each |
64 | 64 | Supply and filling of flyash in sunken portion including watering, ramming and consolidation all complete. NSI | BI01010001010000000000000515BI0100001176 | 12 | Cum |
65 | 65 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. DSR Item 22.5 | BI01010001010000000000000515BI0100001177 | 70 | Sqm |
66 | 66 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. DSR Item 22.7.1 | BI01010001010000000000000515BI0100001178 | 918 | Sqm |
67 | 67 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase. DSR Item 12.21.1 | BI01010001010000000000000515BI0100001179 | 296 | Mtr |
68 | 68 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. DSR Item 12.22 | BI01010001010000000000000515BI0100001180 | 17 | Each |
69 | 69 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR Item 13.80 | BI01010001010000000000000515BI0100001181 | 7083 | Sqm |
70 | 70 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer. DSR Item 13.41.1 | BI01010001010000000000000515BI0100001182 | 5585 | Sqm |
71 | 71 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. DSR Item 13.45.1 | BI01010001010000000000000515BI0100001183 | 1498 | Sqm |
72 | 72 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR Item 13.62.1 | BI01010001010000000000000515BI0100001184 | 532 | Sqm |
73 | 73 | Providing and fixing on wall face unplasticised Rigid PVC pipes for rain water and sainitary, conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter x 6 Kg. DSR Item 12.41.2 | BI01010001010000000000000515BI0100001185 | 224 | Mtr |
74 | 74 | Providing and fixing on wall face unplasticised Rigid PVC pipes for sainitary, conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 150 mm diameter x 6 Kg. NSI | BI01010001010000000000000515BI0100001186 | 30 | Mtr |
75 | 75 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm. DSR Item 12.43.2 | BI01010001010000000000000515BI0100001187 | 34 | Each |
76 | 76 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories trap of self cleansing design with screwed down or hinged 100 mm inlet and 100 mm outlet x 6 Kg. NSI | BI01010001010000000000000515BI0100001188 | 24 | Each |
77 | 77 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler 110 mm x 6 Kg. DSR Item 12.42.1.2 | BI01010001010000000000000515BI0100001189 | 17 | Each |
78 | 78 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door 110x110x110 mm x 6 Kg. DSR Item 12.42.3.2 | BI01010001010000000000000515BI0100001190 | 22 | Each |
79 | 79 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend x 6 Kg. DSR Item 12.42.5.2 | BI01010001010000000000000515BI0100001191 | 28 | Each |
80 | 80 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain)110 mm Shoe x 6 Kg. DSR Item 12.42.6.2 | BI01010001010000000000000515BI0100001192 | 17 | Each |
81 | 81 | Providing and fixing of aluminium sheet of approaved gauge for door shutter including finishing all material,labour T&P etc.complete. NSI | BI01010001010000000000000515BI0100001193 | 18 | Sqm |
82 | 82 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. DSR Item 17.1.1 | BI01010001010000000000000515BI0100001194 | 16 | Each |
83 | 83 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. DSR Item 17.2.1 | BI01010001010000000000000515BI0100001195 | 9 | Each |
84 | 84 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. DSR Item 17.5.1 | BI01010001010000000000000515BI0100001196 | 12 | Each |
85 | 85 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. DSR Item 17.7.2 | BI01010001010000000000000515BI0100001197 | 24 | Each |
86 | 86 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. DSR Item 17.8 | BI01010001010000000000000515BI0100001198 | 24 | Each |
87 | 87 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm. DSR Item 17.11.2 | BI01010001010000000000000515BI0100001199 | 8 | Each |
88 | 88 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. DSR Item 17.10.1.1 | BI01010001010000000000000515BI0100001200 | 1 | Each |
89 | 89 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 610 gms. 15 mm nominal bore. DSR Item 18.50.1 | BI01010001010000000000000515BI0100001201 | 34 | Each |
90 | 90 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. DSR Item 18.52.1 | BI01010001010000000000000515BI0100001202 | 4 | Each |
91 | 91 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore. DSR Item 18.53.1 | BI01010001010000000000000515BI0100001203 | 26 | Each |
92 | 92 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR Item 17.31 | BI01010001010000000000000515BI0100001204 | 24 | Each |
93 | 93 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. DSR Item 17.72 | BI01010001010000000000000515BI0100001205 | 24 | Each |
94 | 94 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. DSR Item 18.65 | BI01010001010000000000000515BI0100001206 | 24 | Each |
95 | 95 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore. DSR Item 18.11.1 | BI01010001010000000000000515BI0100001207 | 62 | Meter |
96 | 96 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore. DSR Item 18.11.2 | BI01010001010000000000000515BI0100001208 | 98 | Meter |
97 | 97 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore. DSR Item 18.10.1 | BI01010001010000000000000515BI0100001209 | 30 | Meter |
98 | 98 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore. DSR Item 18.10.2 | BI01010001010000000000000515BI0100001210 | 186 | Meter |
99 | 99 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore. DSR Item 18.10.3 | BI01010001010000000000000515BI0100001211 | 84 | Meter |
100 | 100 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 32 mm dia nominal bore. DSR Item 18.10.4 | BI01010001010000000000000515BI0100001212 | 30 | Meter |
101 | 101 | Providing and fixing gun metal gate valve of approved quality conforming to IS:8931 and 15 mm dia size. NSI | BI01010001010000000000000515BI0100001213 | 3 | Each |
102 | 102 | Providing and fixing gun metal gate valve of approved quality conforming to IS:8931 and 20 mm dia size. NSI | BI01010001010000000000000515BI0100001214 | 6 | Each |
103 | 103 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal. DSR Item 18.19.1.1 | BI01010001010000000000000515BI0100001215 | 2 | Each |
104 | 104 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore Horizontal. DSR Item 18.19.2.1 | BI01010001010000000000000515BI0100001216 | 1 | Each |
105 | 105 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR Item 18.48 | BI01010001010000000000000515BI0100001217 | 3000 | Ltr |
106 | 106 | Constructing of 150 mm dia deep bore for submersible pump including 110x10kg PVC pipe, 32x10kg PVC pipe, sllated pipe, P gravel, 1 H.P.Kirloskar make ISI submersible pump & controll pannel with lowering of all pvc pipe, pump, testing, instalation complete as per dirction of engineer - in- charge and approved D.P.R. 60m deep tube well all work complete. NSI | BI01010001010000000000000515BI0100001218 | 1 | Each |
107 | 107 | Supply and filling of brick ballast 50 mm size includning all etc complete of work. NSI | BI01010001010000000000000515BI0100001219 | 8 | Cum. |
108 | 108 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head. DSR Fire Item 4.1 | BI01010001010000000000000515BI0100001220 | 1 | Set |
109 | 109 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 32 mm dia. DSR Fire Item 7.2\n | BI01010001010000000000000515BI0100001221 | 40 | Mtr |
110 | 110 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50 mm dia. DSR Fire Item 7.4\n | BI01010001010000000000000515BI0100001222 | 42 | Mtr |
111 | 111 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia. DSR Fire Item 7.6\n | BI01010001010000000000000515BI0100001223 | 80 | Mtr |
112 | 112 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia. DSR Fire Item 7.7\n | BI01010001010000000000000515BI0100001224 | 12 | Mtr |
113 | 113 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 mtr. DSR Fire Item 17.1 | BI01010001010000000000000515BI0100001225 | 3 | Set |
114 | 114 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal. DSR Fire Item 9.1 | BI01010001010000000000000515BI0100001226 | 1 | Set |
115 | 115 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal. DSR Fire Item 10.1 | BI01010001010000000000000515BI0100001227 | 1 | Set |
116 | 116 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80 mm Dia. DSR Fire Item 14.4\n | BI01010001010000000000000515BI0100001228 | 1 | Set |
117 | 117 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304). DSR Fire Item 16.2 | BI01010001010000000000000515BI0100001229 | 4 | Set |
118 | 118 | Providing and fixing carbon –di-oxide 6.00 kg. fire extinguisher consisting of welded M.S.Cylindrical body,squeeze lever discharge valve fitted with internal discharge tube 30 cms long high pressure discharge hose discharge nozzle ,suspension bracket confirming to IS:934 finished externally with red enamel paint and fixed to wall brackets with rawl plug/dash fasteners complete with internal charge(CCOE:-nagpur approved cylinder Make:-Omex. NSI\n | BI01010001010000000000000515BI0100001230 | 10 | Each |
119 | 119 | Providing and fixing of ABC type 4.00 kg capacity (stored pressure ) fire extinguisher ISI Marked complete inall respect. Make:-Omex. NSI\n | BI01010001010000000000000515BI0100001231 | 10 | Each |
120 | 120 | Providing and fixing of self-illuminated/auto glow exit signs printed on photoluminescent sheet containing self-illuminated base chemical of appropriate size not less than 300 x 120 mm,suspended from celling or fixed to the walls withaccessories as required and as direction at site. NSI\n | BI01010001010000000000000515BI0100001232 | 6 | Each |
121 | 121 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. DSR Fire Item 22 | BI01010001010000000000000515BI0100001233 | 1 | Each |
122 | 122 | Providing,installation,testing and commissioning of gun metal ball valves of following sizes as required Make:-zoloto/Drp/sant. 25 mm Dia. NSI\n | BI01010001010000000000000515BI0100001234 | 4 | Each |
123 | 123 | Providing and Fixing of lockable Iron hinged Double door with 4mm glass for Hose Cabinet made of 18 guage with Powder Red coated paint and white paint inside on walls toaccommodate hose pipe.(Make:-Omex). NSI\n | BI01010001010000000000000515BI0100001235 | 2 | Each |
124 | 124 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal. DSR Fire Item 18.1 | BI01010001010000000000000515BI0100001236 | 2 | Each |
125 | 125 | Providing Pressure gauge 3/8 fluid with glycerin suitable forworking pressure of 7Kg/Sqmm(100 mm dia) Make:-Hguru. NSI\n | BI01010001010000000000000515BI0100001237 | 2 | Each |
126 | 126 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm Dia. DSR Fire Item 11.5\n | BI01010001010000000000000515BI0100001238 | 2 | Set |
127 | 127 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm Dia. DSR Fire Item 11.4\n | BI01010001010000000000000515BI0100001239 | 3 | Each |
128 | 128 | Supplying, Installation, Commissioning and Testing of power Automatic control panel. Auto panel will have MCCB incoming and outgoing with ON/OFF indication lamp, with starter switching facility for pump, and manual ON/OFF. NSI\n | BI01010001010000000000000515BI0100001240 | 1 | Each |
129 | 129 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904as required : 2 way-100 mm dia M.S. Pipe. DSR Fire Item 19.1 | BI01010001010000000000000515BI0100001241 | 1 | Each |
130 | 130 | Providing & fixing high pressure metallic hose with Fittings(25 NB) at one end for connection to pipe and 15 NB. NSI\n | BI01010001010000000000000515BI0100001242 | 3 | Each |
131 | 131 | Fireman Axe tested upto 20000volt Omex Make. NSI\n | BI01010001010000000000000515BI0100001243 | 2 | Each |
132 | 132 | WGSTLPT Point wiring in PVC conduit, with modular type switch. Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. DSR E&M Item 1.10.3 | BI01010001010000000000000515BI0100001244 | 354 | Point |
133 | 133 | WGSTLMIDTC Twin Control point wiring in PVC conduit, with modular type switch: Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. DSR E&M Item 1.11 | BI01010001010000000000000515BI0100001245 | 6 | Point |
134 | 134 | LPACCPT S/F light plug point modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). DSR E&M Item 1.31 | BI01010001010000000000000515BI0100001246 | 42 | Each |
135 | 135 | PPACCPT S/F power plug point modular type accessories: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. DSR E&M Item 1.32 | BI01010001010000000000000515BI0100001247 | 28 | Each |
136 | 136 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2X1.5 sq.mm. + 1X 1.5 sq.mm earth wire. DSR E&M Item 1.14.1 | BI01010001010000000000000515BI0100001248 | 2140 | Mtr |
137 | 137 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x2.5 sq. mm + 1x2.5 sq.mm earth wire. DSR E&M Item 1.14.2 | BI01010001010000000000000515BI0100001249 | 1420 | Mtr |
138 | 138 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x4 sq. mm + 1x4 sq.mm earth wire. DSR E&M Item 1.14.3 | BI01010001010000000000000515BI0100001250 | 390 | Mtr |
139 | 139 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. DSR E&M Item 1.14.4 | BI01010001010000000000000515BI0100001251 | 140 | Meter |
140 | 140 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as require 1X 1.0 sq.mm earth wire for invertor. NSI | BI01010001010000000000000515BI0100001252 | 2140 | Mtr |
141 | 141 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 1 Pair. DSR E&M Item 1.18.1 | BI01010001010000000000000515BI0100001253 | 140 | Mtr |
142 | 142 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. DSR E&M Item 1.19 | BI01010001010000000000000515BI0100001254 | 120 | Mtr |
143 | 143 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable. DSR E&M Item 1.53.1 | BI01010001010000000000000515BI0100001255 | 1280 | Meter |
144 | 144 | PVCCON S/F PVC conduit: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 20 mm. DSR E&M Item 1.21.1 | BI01010001010000000000000515BI0100001256 | 1160 | Mtr |
145 | 145 | PTSWEB S/F modular type switch/ socket: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telehone socket outlet. DSR E&M Item 1.24.6 | BI01010001010000000000000515BI0100001257 | 16 | Each |
146 | 146 | MODFREB S/F modular type electronic fan regulator: Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR E&M Item 1.25 | BI01010001010000000000000515BI0100001258 | 91 | Each |
147 | 147 | CREB S/F ceilling rose: Supplying and fixing 3 pin, 5 amp. ceilling rose on the existing junction box/ wooden block including connection etc. as required. DSR E&M Item 1.33 | BI01010001010000000000000515BI0100001259 | 72 | Each |
148 | 148 | BRHOLD S/F brass holder: Supplying and flxing brass batten/angle holder including connection etc. as required. DSR E&M Item 1.34 | BI01010001010000000000000515BI0100001260 | 86 | Each |
149 | 149 | ITCFFSUR ITC fluorescent fitting directly on surface: Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. DSR E&M Item 1.41 | BI01010001010000000000000515BI0100001261 | 98 | Each |
150 | 150 | ITCCFFC ITC ceiling fan: Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. DSR E&M Item 1.45 | BI01010001010000000000000515BI0100001262 | 91 | Each |
151 | 151 | ITCEF450 ITC exhaust fan upto 450 mm sweep: Installation of exhaust fan upto 450 mm sweep in the existingopening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required. DSR E&M Item 1.50.1 | BI01010001010000000000000515BI0100001263 | 22 | Each |
152 | 152 | Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. 100 amps TPN. DSR E&M Item 3.2.4 | BI01010001010000000000000515BI0100001264 | 1 | Each |
153 | 153 | Supplying, installing, testing and commissioning of following capacity TPN tap off box / plug-in box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing overhead bus bar system complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required. 100 amps Busbar. DSR E&M Item 3.7.3 | BI01010001010000000000000515BI0100001265 | 1 | Each |
154 | 154 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 36kA, FPMCCB. DSR E&M Item 2.2.14 | BI01010001010000000000000515BI0100001266 | 1 | Each |
155 | 155 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way, Double door. DSR E&M Item 2.3.3 | BI01010001010000000000000515BI0100001267 | 4 | Each |
156 | 156 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 6 way (4 + 18), Double door. DSR E&M Item 2.4.1 | BI01010001010000000000000515BI0100001268 | 2 | Each |
157 | 157 | MCBC S/F 'C' Curve, SP MCB Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. DSR E&M Item 2.10.1 | BI01010001010000000000000515BI0100001269 | 108 | Each |
158 | 158 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps. DSR E&M Item 2.13.1 | BI01010001010000000000000515BI0100001270 | 4 | Each |
159 | 159 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps. DSR E&M Item 2.13.2 | BI01010001010000000000000515BI0100001271 | 2 | Each |
160 | 160 | EARGIPL G.I earth plate elctrode: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. DSR E&M Item 5.4 | BI01010001010000000000000515BI0100001272 | 3 | Set |
161 | 161 | Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. DSR E&M Item 5.7 | BI01010001010000000000000515BI0100001273 | 60 | Meter |
162 | 162 | Supply and fixing of A.C. Point including all fittings complete. NSI | BI01010001010000000000000515BI0100001274 | 16 | Each |
163 | 163 | Supply and fixing of Angle iron frame with ply board (size 900 X 600 mm) on wall for MCCB, TPN / Bus bar complete. NSI | BI01010001010000000000000515BI0100001275 | 1 | Each |
164 | 164 | CEILLING FAN Supply of AC 230/250 volts, 50 HZ energy efficient ceiling fan with standard down rod, blades, 2 nos. caps etc. complete (Make : Usha /Bajaj /Crompton / Havells) 1200 mm sweep. NSI | BI01010001010000000000000515BI0100001276 | 91 | Each |
165 | 165 | Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. completeModel- Ventil Air - DS (Make : Bajaj /Compton / Havells) 300 mm sweep 900 rpm. NSI | BI01010001010000000000000515BI0100001277 | 22 | Each |
166 | 166 | Supply and fixing of LEDTube Light -Wall mounted LED batten , extruded aluminium Heat sink provided for efficient heat dissipation & integrated electronic driver. (1X18W LED) complete in all aspects as per direction of Engineer in Charge. NSI | BI01010001010000000000000515BI0100001278 | 98 | Each |
167 | 167 | Supply and fixing of L.E.D. 9 watt ISI make complete. NSI | BI01010001010000000000000515BI0100001279 | 25 | Each |
168 | 168 | Supply and fixing of L.E.D. 14 watt ISI make complete. NSI | BI01010001010000000000000515BI0100001280 | 61 | Each |
169 | 169 | Supply and fixing of bulk head including fittings all complete. NSI | BI01010001010000000000000515BI0100001281 | 4 | Each |
170 | 170 | Supply and fixing of conceilled ceiling light including fittings all complete. NSI | BI01010001010000000000000515BI0100001282 | 20 | Each |
171 | 171 | Supply and fixing of security light 1X72 watt L.E.D. ISI make with wall brecket and fittings complete. NSI | BI01010001010000000000000515BI0100001283 | 10 | Each |
172 | 172 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 25 sq. mm (28mm) DSR E&M Item 9.1.34 | BI01010001010000000000000515BI0100001284 | 160 | Mtr |
173 | 173 | Supply and fixing of L & T make Pannel Board with 1 no. incomer of 125 amp FP MCCB 25 KA and outgoings of 2 no. 32 amp FP MCCB 25 KA & 4 no. outgoing of 16 amp TPN MCB with suitable Busbar, Change over switch, Ammeter, Voltmeter, Indicating Lamps etc. complete in all respect as per direction of Engineer-in-charge. NSI | BI01010001010000000000000515BI0100001285 | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail