}

Repair To Fencing Security Wall Steel Gate Painting To Security Wall Under Ge North Akhnoor, Akhnoor-Jammu And Kashmir

Military Engineer Services-MES has published Repair To Fencing Security Wall Steel Gate Painting To Security Wall Under Ge North Akhnoor. Submission Date for this Tender is 01-07-2021. Wall construction Tenders in Akhnoor Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

28079932
Corrigendum : Repair To Fencing Security Wall Steel Gate Painting To Security Wall Under Ge North Akhnoor
National Competitive Bid
Indian
Jammu And Kashmir
Akhnoor
01-07-2021

Tender Details

Repair To Fencing Security Wall Steel Gate Painting To Security Wall Under Ge North Akhnoor

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 24-Jun-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 01-07-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 54000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work : REPAIR TO FENCING, SECURITY WALL, STEEL GATE AND PAINTING TO SECURITY WALL UNDER GE NORTH AKHNOOR.
Sl. No. Item Description Item Code / Make Qty Units
1 1 Dismantling of existing Steel/Wooden posts and struts, any sections embedded in concrete/hard core including taking out embedded portion and making good disturbed ground complete all as specified and as directed by Engineer-in-Charge.\nNotes : - This item shall also include the demolition of foundation concrete/hard core and taking out the posts and struts carefully and removing the same from site. 270 RM
2 2 Mild steel work conforming to Fe 290 Gde E-165 as in posts and struts etc in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed by Engineer-in-Charge. 700 Kg
3 3 All as per item no 2 here-in-above but fixing only. 85 Kg
4 4 PCC 1:3:6 type C-1, using 20 mm graded stone aggregate, as in benching and coping, bed plates and similar work etc including necessary form work all as specified and as directed by Engineer-in-charge. 1 Cum
5 5 Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified. 2 Cum
6 6 Dismantling/taking down barbed wire from the existing angle iron fencing posts and neatly coiling on rough drums for re-use or removing from the site complete all as directed by Engineer-in-Charge. 30 100RM
7 7 Galvanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to mild steel fencing posts, any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel nibs, pins complete all as specified and as directed.\nNote : \n(i) Each line of barbed wire to be measured seperately. (ii) Measurement of barbed wire during payment shall be as per "Weight by BOO" 25 100RM
8 8 All as per Srl item No. 7 here in before but using old wire including restraining, resecuring including making good staples etc. complete all as specified. 5 100RM
9 9 Concertina coil 600mm dia / 56 loopse / 2.5 mm core wire, Coil Diameter: 600 mm, Type of Strip: Heavy Galvanised (IS:1703), Type of Core wire: Heavy Galvanised (IS:280-2006), Core wire Diameter: 2.50 mm Dia, Zinc Coating to Strip: Minimum 200 GSM/sqmm, Zine Coating on wire: Minimum 275 GSM/sqmm (IS 6745-1972 reaffirmed 2006), Tensile Strength of wire 1400-1500 N /sqmm, Weight: 6-8 Kg (± 5%), Number of Loops: 56. Blade Length: 22 MM, Barb Profile: Medium Blade (MBBT), Distance Between Barb. 35 mm, Stretchable length 6-8 mtrs, Type of clip: Hardened Steelin Galvanised steel, complete all as specified & directed.\nNote: Measurement of concertina coil during payment shall be as per "Weight by BOO" 3 100RM
10 10 Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth using integral water proofing compound including taking down cement plaster of any description complete all as specified and as directed by Engineer-in-Charge \n 3400 Sqm
11 11 Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge. 3080 Sqm
12 12 Preparation of old plastered or unplastered surfaces of walls and applying one coats of cement base paint complete all as specified and as directed by Engineer-in-Charge. 27500 Sqm
13 13 Preparing new treated surfaces for beam projection etc of any type of projection (plastered or unplastered surfaces) and applying two coat of apex paint all as specified and directed. 320 Sqm
14 14 Preparing old treated surfaces for beam projection etc of any type of projection (plastered or unplastered surfaces) and applying one coat of apex paint all as specified and directed. 2489 Sqm
15 15 Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified. 6 Cum
16 16 Brick work with Sub Class ‘B’ burnt bricks (Old size bricks) straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete, all as specified. 4 Cum
17 17 All as per Srl item No 16 here-in-before but except Bricks. 2 Cum
18 18 Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth using integral water proofing compound and two coat of cement base paint over one coat primer complete all as specified and as directed by Engineer-in-Charge.\n(Note:- WPC shall be measured and paid separately)\n 60 Sqm
19 19 Supply of liquid water proofing compound. 100 Ltr
20 20 Preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and apply two coats of Synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. 180 Sqm
21 21 Preparation of old steel surfaces of any description over 10 cm in width or girth not otherwise described and apply one coats of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. 500 Sqm
22 22 Dismantling structural steel work including doors, gates but excluding framed truss etc. Embeded in concrete /hard core incl taking out embeded portion and making good disturbed ground complete all as specified and directed by Engineer-in-Charge. 1 Qtl
23 23 Mild steel work conforming to Fe 290 Gde E-165 as in Framed work in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other\ncovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel\nsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge. 220 Kg
24 24 S and F Welded steel wire fabric weight not exc. 4.0 kg/sqm complete to wood or steel members all as specified and directed by Engineer-in-Charge. 20 Kg
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail