Military Engineer Services-MES has published Spl Repair To Sewage Sump And Bldg . No . P-98 At Saraswati Vihar Old Cantt Allahabad . . Submission Date for this Tender is 15-07-2021. Building Work Tenders in Allahabad Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 12-Jun-2021 | Revised BoQ and Amendment | BOQ | 23-06-2021 |
| 2 | 26-Jun-2021 | Date Postponed | Date | 15-07-2021 |
| Name of Work : SPL REPAIR TO SEWAGE SUMP AND BLDG NO. P-98 AT SARASWATI VIAHR OLD CANTT ALLAHABAD. | |||||
|---|---|---|---|---|---|
| Ser. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan& depth not exceeding 1.5 m in soft/loose soil and getting out for foundation, trenches etc complete all as specified & directed. | 96.25 | 40 | Cum |
| 2 | 2 | Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan& depth not exceeding 1.5 m in hard/dense soil and getting out for foundation, trenches etc complete all as specified & directed. | 1 | Cum | |
| 3 | 3 | Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed. | 31 | Cum | |
| 4 | 4 | Removal of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed. | 10 | Cum | |
| 5 | 5 | Second Class Hard Wood [Sal] small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops etc including all necessary article not exceeding 200 cu. cm each complete as specified & directed by Engineer-in-Charge. | 16 | Each | |
| 6 | 6 | PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation filling or mass concrete or similar wrok complete all as specified & directed. | 7.5 | Cum | |
| 7 | 7 | PCC 1:5:10 type E-2 using 40 mm graded crushed stone aggregate as in foundation filling or mass concrete or similar wrok complete all as specified & directed. | 11 | Cum | |
| 8 | 8 | Machine Pressed precast cement concrete interlocking paver block 60 mm thick rubberised any shape & size conforming to IS : 15658 - 2006 of M-35 Grade with grey cement & pigment over and including average 25 mm thick sand cushioning complete all as specified & directed. | 60 | Sqm | |
| 9 | 9 | Machine Pressed precast cement concrete interlocking paver block 80 mm thick rubberised any shape & size conforming to IS : 15658 - 2006 of M-40 Grade with grey cement & pigment over and including average 25 mm thick sand cushioning complete all as specified & directed. | 75 | Sqm | |
| 10 | 10 | Demolition of brick work built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facing, dresssed stonework and precast concrete atrticles complete all as specified and directed. | 5 | Cum | |
| 11 | 11 | Brick work with old size subclass 'B' bricks [crushing strength not less than 75 Kg per Sqcm] straight or curved on plan exceeding 6 m mean radius built in cement sand mortar 1:6 complete all as specified & directed. | 5 | Cum | |
| 12 | 12 | Brick work with fly ash bricks [crushing strength not less than 75 Kg per Sqcm] straight or curved on plan exceeding 6 m mean radius built in cement sand mortar 1:6 complete all as specified & directed. | 3 | Cum | |
| 13 | 13 | Dismantling of floor, hearth or wall tiling including cement mortar bedding & backing complete and removing of rubbish from site complete all as specified & directed. | 330 | Sqm | |
| 14 | 14 | Non Skid Jointless ceramic light coloured tiles 7-8mm thick [premium quality] (square or rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm, laid in floors set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 15 mm thick Screed bed or bedding layer in cement sand mortar in 1:6 for laying of ceramic tiles complete all as specified & directed. | 30 | Sqm | |
| 15 | 15 | Glazed ceramic coloured tiles [premium quality] as in vertical surface of walls such as skirting / dado and risers to steps, size of tile 450x300mmx 6-7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 10 mm thick rendering as in backing of tiles in cement mortar in 1:4 complete all as specified & directed. | 300 | Sqm | |
| 16 | 16 | Paving tiles, exterior type, heavy duty, full body coloured, of size 300mm x 300mm x 8 to 9mm thick, in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including provision of 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.\n | 50 | Sqm | |
| 17 | 17 | Machine cut kota stone slab flooring 20-25mm thick laid over and including cement screed bed or base 15mm thick in CM 1:4 laid, including 100 mm wide 16 mm thick marble strip all around border of flooring, and jointed with grey cement slurry mixed with colouring pigment to match the colour or shade of the slab including rubbing and mirror polishing complete all as specified & directed. | 45 | Sqm | |
| 18 | 18 | Machine cut Baroda green granite stone slab 18-20mm thick with granite polish as in kitchen shelf or wash hand basin top, laid over and including cement screed bed or base 15mm thick in CM 1:4 laid and jointed with cement slurry rubbing and polishing rounding the edges or nosing half round complete all as specified & directed. | 11 | Sqm | |
| 19 | 19 | Taking down cement plaster on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises complete all as specified & as directed. | 850 | Sqm | |
| 20 | 20 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement sand mortar 1:4, finished surface even and smooth without using extra cement complete all as specified & directed. | 312 | Sqm | |
| 21 | 21 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement sand mortar 1:6, finished surface even and smooth without using extra cement complete all as specified & directed. | 450 | Sqm | |
| 22 | 22 | Rendering 10 mm thick on fair faces of brick wall or concrete surface surfaces in cement sand mortar 1:4, finished surface even and smooth without using extra cement complete all as specified & directed. | 50 | Sqm | |
| 23 | 23 | Rendering 5 mm thick on ceiling surfaces of brick work or concrete ceiling surfaces in cement sand mortar 1:3, finished surface even and smooth without using extra cement complete all as specified & directed. | 50 | Sqm | |
| 24 | 24 | Supply only Integral water proofing compound ISI marked | 130 | KG | |
| 25 | 25 | Rendering 15 mm thick in cement mortar 1:3 on concrete surfaces for chajjas, facia, roof projection and parapet finished fair and even including all necessary scaffolding complete all as specified & directed. | 50 | Sqm | |
| 26 | 26 | Preparing old decorated plastered surfaces of walls including cornices, pilaster etc, by brooming down with steel wire brush, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying two coats of white wash on wall surface complete all as specified & directed. | 300 | Sqm | |
| 27 | 27 | Three coats of white wash on newly plastered surface of ceilling after preparation of new plastered surface complete all as specified & directed. | 50 | Sqm | |
| 28 | 28 | Demolition of Concrete work (unreinfored) in ground floors and pavings including floor tiles not exeedingc 15 cm thickness (below or above ground level) and removing rubbish from site as directed by Engineer-in-Charge. | 32 | Cum | |
| 29 | 29 | Dismantling of stone slab and stone tiles of any thickness and description in floors or apron laid bedded pointed in any mortar of floor including cement mortar bedding & backing complete and removing of rubbish from site complete all as specified & directed. | 5.6 | 10 Sqm | |
| 30 | 30 | Demolition of Mud / Lime concrete from roof surface not exceeding 200 mm thick including plastering, leaping, vegetation shrubs not exceeding 15 cm thickness (below or above ground level) and removing rubbish from site complete as directed by Engineer-in-Charge. | 35 | Cum | |
| 31 | 31 | Brushing with neat cement slurry @ 3.50 Kg/Sqm after cleaning of concrete surface complete all as specified & directed. | 250 | Sqm | |
| 32 | 32 | Cutting out cracks to 'V' section of existing roof or terracing, cleaning out, wetting, grouting with cemnt slurry in CM (1:3) complete all as specified & directed. | 10 | RM | |
| 33 | 33 | Cutting chases in brick walls, pinning in making good to facing required and pointing in cement sand mortar in 1:3 to ends or edges of landing, steps, cills, shelves, lintels and cutting chases for concealed water tubing or conduit wiring and making good cutting not exceeding 10 cm width or girth complete all as specified & directed by Enginer-in-Charge. | 60 | RM | |
| 34 | 34 | Cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete Superficial area not exceeding 400 sq.cm complete all as specified & directed by Enginer-in-Charge. | 60 | Per CM of depth | |
| 35 | 35 | PCC 1:3:6 type C-1 using 20mm crushed stone aggregate as in hold fasts,coping and bed blocks including necessary form work if required complete all as specified & directed. | 0.16 | Cum | |
| 36 | 36 | PCC 25 mm thick 1:2:4 type B-1 using 20 mm crushed stone aggregate as in floor finish or base of floor, surface finished even & fair for base of tiles or leveling course complete all as specified & directed. | 75 | Sqm | |
| 37 | 37 | PCC 75 mm thick 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in plinth protection including making 12 mm wide joint to the full depth of PCC at the length not exceeding 3.0 mtr and at every change of direction and filling the same with and including bitumen and sand 1:3 by weight complete all as specified & directed. | 40 | Sqm | |
| 38 | 38 | Mild steel TMT bars 8-10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed. | 115 | Kg | |
| 39 | 39 | Taking out old rusted or damaged 15 mm bore galvanised steel water tubing & connections for cleaning or re-fixing if required complete all as specified & as directed. | 80 | RM | |
| 40 | 40 | Taking out old rusted or damaged 20 mm bore galvanised steel water tubing & connections for cleaning or re-fixing if required complete all as specified & as directed. | 80 | RM | |
| 41 | 41 | Galvanised steel water tubing 15 mm bore medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed. | 70 | RM | |
| 42 | 42 | Galvanised steel water tubing 20 mm bore medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed. | 70 | RM | |
| 43 | 43 | Galvanised steel water tubing 15 mm bore [Except GI tubing] medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.\nNote : Old serveciable GI pipe shall be used in work with new fittings. | 10 | RM | |
| 44 | 44 | Galvanised steel water tubing 20 mm bore [Except GI tubing] medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.\nNote : Old serveciable GI pipe shall be used in work with new fittings. | 10 | RM | |
| 45 | 45 | Dismantling existing PVC / HDPE water tanks of capacity exceeding 250 but not exceeding 500 litres, complete all as specified and directed.\n | 8 | Each | |
| 46 | 46 | Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top), 500 litre capacity (ISI embossed), double layered, hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.\n | 8 | Each | |
| 47 | 47 | Gun metal gate valve 20 mm bore with iron wheel head screwed both ends complete all as specified & directed. | 16 | Each | |
| 48 | 48 | Ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball secured for iron pipe of dia 20mm (minimum weight 210 gram), fixed in repairs, complete all as specified and directed.\n | 8 | Each | |
| 49 | 49 | Chromium plated soap tray / soap dish [size 100x 60 mm] fixed with steel screws on walls complete all as specified. | 8 | Each | |
| 50 | 50 | Demolition and breaking up 150 mm dia in bore drain pipes (salt glazed ware, AC or reinforced concrete ) set in cement mortar in any description complete all as specified & directed. | 25 | RM | |
| 51 | 51 | Concrete bed to drain pipes of 150 bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate complete all as specified & directed. | 25 | RM | |
| 52 | 52 | Reinforced concrete pipe 150 mm internal dia NP-3 laid in trenches and jointed in cement sand mortar 1:1 complete all as specified & directed. | 25 | RM | |
| 53 | 53 | Bib tap 15mm bore cast copper alloy fancy type chromium plated with capstan head handle screwed down for iron pipes or for brass ferrule complete all as specified & directed. | 48 | Each | |
| 54 | 54 | Angle valves 15mm bore cast copper alloy screwed down high pressure with crutch or butterfly headed handle screwed both ends for securing iron pipe or for union complete all as specified & directed. | 32 | Each | |
| 55 | 55 | Stop valves 15mm bore fancy type Chromium plated (concealled type) cast copper alloy screwed down high pressure with capstan headed handles screwed both ends for iron pipe or for union complete all as specified & directed. | 8 | Each | |
| 56 | 56 | Chromium plated shower rose fancy type with swivel joints fixed to 15mm bore pipe complete all as specified & as directed. | 8 | Each | |
| 57 | 57 | Cast iron 100 mm sanitary connection socket to fit WC outlet complete all as specified & as directed. | 8 | Each | |
| 58 | 58 | Sheet glass shelf assembly consisting of 5 mm thick sheet glass shelf 120mm wide with & 600 mm long chromium plated bracket guard nad railing fixed with steel screws on wall complete all as specified & as directed. | 8 | Each | |
| 59 | 59 | Corner sheet glass shelf assembly consisting of 5 mm thick sheet glass shelf 120mm wide with & 600 mm long chromium plated bracket guard nad railing fixed with steel screws on wall complete all as specified & as directed. | 8 | Each | |
| 60 | 60 | PVC connection 15mm size with brass fly nuts on both ends of length 450mm complete all as specified & directed. | 32 | Each | |
| 61 | 61 | Chromium plated tubular towel rail 600 mm long 20 mm dia "D" type between flanges fixed with steel screws complete all as specified & directed. | 8 | Each | |
| 62 | 62 | Vitreous china wash hand basin white flat back of size 550x400mm excluding chain & plug and porcelain stopper but including brackets, PVC waste pipe 32 mm bore 600mm long, chromium plated waste coupling 32 mm dia long shank complete as specified & directed | 8 | Each | |
| 63 | 63 | Supply only 15mm bore Pillar tap cast copper alloy fancy type swan neck type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified & directed. | 8 | Each | |
| 64 | 64 | Sink with drainage board made of stainless steel 1 mm thick steel sheet with plugs, washer, waste pipe 40 mm bore 600 mm long or CP waste coupling 40 mm bore, rest on mild steel brackets or on dwarf wall overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed. | 4 | Each | |
| 65 | 65 | Stainless steel kitchen plate rack (utensil rack) of size 600mm x 750mm and 250 mm depth made with 0.63 mm thick stainless steel sheet fixed with steel screw including necessary fittings, nut / bolts, washer including hanging on wall with steel screws with rawal plug complete all as specified & directed.\nMake & Model : KPR-311 of Blue Star or P-330 of Prayag | 8 | Each | |
| 66 | 66 | Vitreous china squatting pan white orissa pattern of size 580 x 440 mm with Integral foot rests (excludig flushing cistern & flush pipe) with VC trap and make good to match with the existing surface of floor complete all as specified & as directed by Engineer-in-charge. | 8 | Each | |
| 67 | 67 | Low density polyethylene pipes (LDPE) 32 mm dia bore of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc for WHB and sink complete as specified & directed. | 20 | RM | |
| 68 | 68 | Grating 100/125/150 mm round PTMT with or without centre hole fixed with adhesive or cementy solvant complete all as specified & directed. | 16 | Each | |
| 69 | 69 | PVC valveless syphonic action type 10 litre capacity low level flushing cistern white colour including 32 mm bore flush pipe 600 mm long, cantilever brackets PVC ball valve, float and PVC handle complete all as specified & directed. | 8 | Each | |
| 70 | 70 | Looking mirror 6 mm thick of size 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. | 8 | Each | |
| 71 | 71 | Taking down eaves gutter rain water pipe ( any size or pattern ) including heads, shoe, bens, tee etc complete all as specified & directed. | 68 | RM | |
| 72 | 72 | PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls or laid in floors or trenches complete all as specified & directed. | 68 | RM | |
| 73 | 73 | PVC (SWR) bends ISI marked with oval & accessed door of any radius of 110 mm bore pipes jointed with cement solvent or adhesive complete all as specified & directed. | 8 | Each | |
| 74 | 74 | PVC (SWR) floor trap 75 mm dia of out let plain with CP grating 90 mm round with or without centre hole for making connection of pipesy, jointing with cement solvant or adhesive complete all as specified & directed. | 8 | Each | |
| 75 | 75 | Taking down chowket or frame with shutter (without taking off shutters from the frame) area not exceeding 1.5 Sqm each complete all as specified & directed. | 24 | Each | |
| 76 | 76 | Taking down chowket or frame with shutter (without taking off shutters from the frame) area exceeding 1.5 Sqm & not exceeding 4.0 Sqm each & removing from site complete all as specified & directed. | 11 | Each | |
| 77 | 77 | Taking down shutter of any description exceeding 1 sqm not exceeding 2 sqm each & removing from site complete all as specified & directed. | 18 | Each Leaf | |
| 78 | 78 | Taking down and re-fixing door shutters in same opening after necessary repair or easing or re-fixing of fitings complete all as specified & directed. | 10 | Each | |
| 79 | 79 | Supply & Fixing steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed or welded joint complete all as specified & directed. | 10 | Sqm | |
| 80 | 80 | Steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete with out glazing bars, dovetailed or welded joint complete all as specified & directed. | 10 | Sqm | |
| 81 | 81 | Steel ventilator factory made with top hung shutter including hinges with steel handle, steel peg stay, dovetailed or welded joint complete all as specified & directed. | 6.5 | Sqm | |
| 82 | 82 | Mild steel handle ( left or right ) for steel window of existing size including necessary welding / rivetting complete all as specified & directed. | 10 | Each | |
| 83 | 83 | Hacking out old broken glass ( any thickness, size, quality or description ) from metal or wooden frame complete as specified & directed. | 20 | Sqm | |
| 84 | 84 | Plain sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads in a square not exceeding 0.5 Sqm in each pane complete as specified & directed. | 30 | Sqm | |
| 85 | 85 | Sheet glass 4 mm thick frosted on one side ordinary quality and glazing with oil putty or wooden beads in a square not exceeding 0.5 Sqm in each pane complete as specified & directed. | 5 | Sqm | |
| 86 | 86 | Stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized steel wire staples / beads in wooden or steel window complete all as specified & as directed. | 12 | Sqm | |
| 87 | 87 | Stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized steel wire staples / beads in wooden or steel window complete all as specified & as directed. | 20 | Sqm | |
| 88 | 88 | Preparation of new plastered surface of walls and apply two coats of oil bound distemper [Acrylic] of approved colour on wall surfaces complete all as specified & directed. | 400 | Sqm | |
| 89 | 89 | Complete removal of exisitng treatment / finish on walls by scraper or wire brushes & clean with water and minor wall cracks or holes shall be filled up with oil putty and applying two coats of oil bound distemper [Acrylic] of approved colour complete all as specified & directed. | 700 | Sqm | |
| 90 | 90 | Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet reinforced with MS square tube complete all as specified & directed. | 80 | RM | |
| 91 | 91 | Factory made 30 mm thick PVC solid panel door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and Plain colour PVC sheet for top & bottom rail, lock rail & bottom rail on either side and as gap insert for top & bottom rail; penelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed. | 25 | Sqm | |
| 92 | 92 | Mild steel work such as hold fast with flat iron for fixing of door frames and similar work complete all as specified & directed. | 10 | Kg | |
| 93 | 93 | PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in benching complete all as specified & directed. | 0.2 | Cum | |
| 94 | 94 | Precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in drain cover, cover slab (for manholes) and similar work including necessary form work and set in CM 1:4 complete all as specified & directed. | 0.5 | Cum | |
| 95 | 95 | Cutting into existing manholes for connecting new drains pipes & making good to pipe and surrounding and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm bore of pipe complete all as specified & directed. | 2 | Each | |
| 96 | 96 | Dismantling wrought iron or mild steel work of any description complete all as specified & directed. | 10 | Quintal | |
| 97 | 97 | Rolled mild steel section conforming to Grade Fe-410-0 or Fe-310-0 as in framing for cladding, glazing and the like including door frames / chowkats or cooler stands, fixed with angle iron, cleats and connecting plates etc including necessary cutting bending welding if required complete all as specified & directed. | 225 | Kg | |
| 98 | 98 | Rolled mild steel section conforming to Fe- 290 (Gde E-165) as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including necessary cutting bending welding if required complete all as specified & directed. | 900 | Kg | |
| 99 | 99 | Mild steel framed work such as grills, gratings with ends of bars shouldered and or riveted, or forged into spikes; framed guard bars, railings, hold fasts or similar work complete all as specified & directed. | 490 | Kg | |
| 100 | 100 | Expanded metal, cut to length, bent to shape required and tying with and including\nannealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples\nsupplied and fixed weight exceeding 4.00 Kg per sqm complete all as specified & directed. | 80 | Kg | |
| 101 | 101 | Joist, channel, angle or Tee section fixed independently without connecting plate etc cut to length complete all as specified & directed. | 100 | Kg | |
| 102 | 102 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out\nembedded portion and making good disturbed ground complete all as specified & directed. | 15 | Kg | |
| 103 | 103 | Dismantling of chain llink fencing complete all as specified and directed. | 90 | Sqm | |
| 104 | 104 | Supply only chain link galvanised wire fencing dia not less than 2.60 mm of mesh size 75mm x 75 mm complete all as specified and directed. | 175 | KG | |
| 105 | 105 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wires complete all as specified and directed. | 60 | Sqm | |
| 106 | 106 | Mild screw bolts (Machine made) with hexagonal or square head at one ends and fitted with washers and one hexagonal or square noot exceeding 15 cm long dia of neck 11 to 15 mm complete all as specified and directed. | 5 | KG | |
| 107 | 107 | Supply & Fixng 30 mm thick flush door shutters, solid core construction, with block board core and ply wood face panels, commercial type ply on both faces complete all as specifed & directed. | 20 | Sqm | |
| 108 | 108 | Second class 35 mm thick hardwood glazed and skelton door shutters, open rebated and prepared to receive glass / gauze etc divided into squares or rectangluar with plain, chamfered or rounded mitered edge beads for securing glass/ gauge complete all as specified in SSR Part 1-1991 section 8 clause 8.20 (a) complete all as specified & directed. | 16 | Sqm | |
| 109 | 109 | Block board 18 to 19 mm thick grade 2 quality interior grade commercial type in cup board shutter and fixed with screw and teak wood beading all around / exposed surfaces complete all as specifed & directed. | 2 | Sqm | |
| 110 | 110 | Mild steel 100mm long butt hinges medium weight cold rolled with steel pin hinge and fixed with steel screws complete all as specified & directed. | 33 | Each | |
| 111 | 111 | Butt hinges 100mm long extruded aluminium alloy with steel hinge pin anodised type B-11 and fixed with steel screws complete all as specified & directed. | 48 | Each | |
| 112 | 112 | Continuous (piano) hinges mild steel bright finish or electro galvanized 30mm width of flaps (when open ) complete all as specified & directed. | 4 | RM | |
| 113 | 113 | Aluminium anodised 150 mm hasp and staple complete all as specified & directed. | 1 | Each | |
| 114 | 114 | Aluminium anodised 150mm long extruded alloy handle cast type and fixed with screws complete all as specified & directed. | 68 | Each | |
| 115 | 115 | Aluminium anodised 150mm long extruded alloy barrel tower bolt fixed with screws complete all as specified & directed. | 34 | Each | |
| 116 | 116 | Aluminium anodised 200mm long extruded alloy barrel tower bolt fixed with screws complete all as specified & directed. | 34 | Each | |
| 117 | 117 | Draphery or curtain rods 25 mm dia fancy type PVC coating with ends brackets decorative type cut to length as required size, colour coating including matching socketed brackets with PVC rings [eight numbers in each RM] complete all as specified & as directed. | 100 | RM | |
| 118 | 118 | Aluminium alloy anodized sliding door bolt with hasp & staple (clip & bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm long complete all as specified & as directed. | 11 | Each | |
| 119 | 119 | Preperation of steel surfaces with sand or emery paper of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed. | 165 | Sqm | |
| 120 | 120 | Preperation of old steel or iron surfaces with sand or emery paper of any description over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. | 200 | Sqm | |
| 121 | 121 | Preperation of new wood or wooden based surface with sand or emery paper of any description over 10 CM width or girth applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed. | 75 | Sqm | |
| 122 | 122 | Preperation of old wooden surfaces of any description over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. | 200 | Sqm | |
| 123 | 123 | Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick, coloured having tensile strength of 550 Mpa as in ridges, roof covering / cladding to wall, fixed with self tapping screws at every alternate corrugation complete all as specified & directed. | 80 | Sqm | |
| 124 | 124 | Complete removal of exisitng treatment / finish on walls by scraper or wire brushes & clean with water and minor wall cracks or holes shall be filled up with cement sand mortar and applying 1 mm thick Birla or JK wall care putty on entire surface of walls surface and rubbing with sand or emery paper of required size to achive uniform smooth surfacre complete all as specified & directed. | 1900 | Sqm | |
| 125 | 125 | Complete removal of exisitng treatment / finish on walls by scraper or wire brushes & clean with water and minor wall cracks or holes shall be filled up with cement sand mortar and applying 1 mm thick Birla or JK wall care putty on entire surface of walls surface and rubbing with sand or emery paper of required size to achive uniform smooth surfacre and than apply two coats of oil bound distemper [Acrylic] on wall surfaces of approved colour complete all as specified & directed. | 30 | Sqm | |
| 126 | 126 | Preparation the base of new plastered surface of walls by applying 1 mm thick Birla or JK wall care putty to wall surface and rubbing with sand or emery paper of required size to achive smooth surfacre of wall and than apply two coats of oil bound distemper [Acrylic] on wall surfaces of approved colour complete all as specified & directed. | 50 | Sqm | |
| 127 | 127 | Preparing old decorated plastered surfaces of ceilling including cornices by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coats of oil bound distemper [Acrylic] on ceiling surfaces of approved colour complete all as specified & directed. | 15 | Sqm | |
| 128 | 128 | Preparation of new plastered surface of walls with sand or emery paper and apply two coats of cement base paint complete all as specified & directed. | 350 | Sqm | |
| 129 | 129 | Complete removal of exisitng treatment / finish on walls and preparation of old plastered surface of walls with sand or emery paper and apply two coats of cement base paint complete all as specified & directed. | 535 | Sqm | |
| 130 | 130 | Dismantling of Cast iron pipe joint in cement mortar upto 100 mm dia including all fittings complete all as specified & directed. | 57 | RM | |
| 131 | 131 | Cast iron soil waste & vent pipe having 100 mm internal dia pipes single socketed ends, in any length with or with out ears with & including cement spun yarn joints, fixed to walls or laid in trenches with steel clamps complete as specified & directed. | 25 | RM | |
| 132 | 132 | Cast iron soil waste & vent pipe having 75 mm internal dia pipes single socketed ends, in any length with or with out ears with & including cement spun yarn joints, fixed to walls or laid in trenches with steel clamps complete as specified & directed. | 32 | RM | |
| 133 | 133 | Cast Iron Bends for 100 mm internal dia (any radius), diminishing pieces or tapers (larger bore measured) complete as specified & directed. | 6 | Each | |
| 134 | 134 | Cast Iron Bends for 75 mm internal dia (any radius), diminishing pieces or tapers (larger bore measured) complete as specified & directed. | 6 | Each | |
| 135 | 135 | Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia bore pipe complete as specified & directed. | 30 | Each | |
| 136 | 136 | Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia bore pipe complete as specified & directed. | 30 | Each | |
| 137 | 137 | Taking up cast iron water mains 100 mm dia bore of any class and length (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for reuse and cleaning and removal of pipe from site complete all as specified and directed. Note :- Excavation and earthwork shall be measured and paid separately. | 60 | RM | |
| 138 | 138 | Supply, laying, jointing and testing Cast iron pipes 100 mm bore with spigot and socket ends (ISI marked) centrifugally cast. Class LA, in any length, laid in trenches complete all as specified & directed. Note :- Excavation and earthwork shall be measured and paid separately. | 60 | RM | |
| 139 | 139 | Cast iron fittings for flanged / spigot socketed end pipe upto 150 mm bore conforming to IS-1538 and ISI marked such as bends, tapers, tee pieces ( single and double branch) any type and angle/radius and straight connecting pieces but all ends flanged complete all as specified and directed. | 66 | KG | |
| 140 | 140 | Supply, Installation, testing and commissioning Non Clog Vertical Submersible Pump of capacity 7.5 HP and discharge 600 Litre per minute at 40 metre head with chrome steel impeller and cutter, non clog to pass 40 mm size particles including supply, installation with guide rail and lifting chain cable including earthing complete all as specified and directed. | 1 | Each Job | |
| 141 | 141 | DOL starter suitable for submersible pump set not less than 10 HP motor, 3 phase, 415 volts complete all as specified and directed | 1 | Each | |
| 142 | 142 | PVC insulated submersible cable 10 sqmm 3 core 440 volts with multi stranded copper conductor complete all as specified and directed | 50 | RM | |
| 143 | 143 | MCCB 100 Amps 4 pole 50 Hz 415 V with running capacity 25 kA complete all as specified and directed. | 1 | Each | |
| 144 | 144 | Providing water proofing treatment over cleaned roof surface comprising of following and testing complete. \n[a] 10 mm thick screed bed or bedding layer in cement sand mortar in 1:3 mixed with water proofing compound @ 3% complete complete all as specified & directed. Note:- Water proofing compound shall be measured and paid separately. [b] Cleaning of roof surface by steel wire brushes, brooming down and removed all loose dirt and cleaned surface shall by applying bitumen primer comforming to IS : 3384-1986 @ 0.3 Litre per Sqm on entire surface of roof uniformly complete all as specified & directed.\n[c] Further apply tack coat of hot blown bitumen 85/25 @ 1.2 Kg per Sqm comforming to IS : 702-1998 on entire surface of roof over priming.\n[d] Over hot bitumen, Laying polymeric waterproofing membrane consisting of 90 to 100 micron thick central core of HMHDPE film with standard weight not less than 3 Kg per Sqm over entire area with overlaps 100 mm each side and joints sealed complete all as specified & directed.\n[e] Further applying tack coat of hot blown bitumen 85/25 @ 1.2 Kg per Sqm over membrane surface (f) Spreading cleaned dry sand @ 0.50 Kg per Sqm over entire surface of roof water proofing membrane | 250 | Sqm | |
| 145 | 145 | Brick tiles 40 mm thick laid over and including 15 mm thick bedding layer in cement sand mortar in 1:4 and joints grouted and flush pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified & directed. | 225 | Sqm | |
| 146 | 146 | Cleaning the sunken floor surfaces by wire brushes, brooming down, removing rubbish / dust and dismantling of lime concrete floor on roof terrace and removing rubbish from site upto 50 m out side the premises of buildings and applying followings:- \n(a) Applying a coat of bitumen primer confirming to IS : 3384-1965 @ 0.30 Lit per Sqm on top of dry / cleaned roof surface or finished cement concrete or plaster surface. \n(b) One coat of hot blown bitumen of grade 85/25 @ 1.2 Kg per Sqm Confirming to IS : 702-1998 shall be applied over primed surfaces.\n(c) Applying a layer of APP based polymeric water proofing membrane of weight not less than 3 Kg per Sqm consisting of 3mm thick reinforced with polyster non woven fabric shall be unrolled surfaces with a over lap of 100 mm side & ends lap and the over lapped shall be sealed by flame torch.\n(d) Again applying further tack coat of hot blown bitumen of grade 85/25 @ 1.2 Kg per Sqm Confirming to IS : 702-1998 shall be applied. \n(e) Spreading cleaned dry sand @ 1.00 Kg per Sqm over entire surface of roof water proofing membrane | 250 | Sqm | |
| 147 | 147 | PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling up sunken floor or similar wrok complete all as specified & directed. | 3 | Cum | |
| 148 | 148 | Taking down carefully point wiring of any type and any description / caping or concealed [light point, fan point or socket point] including removal of battens, pipes, plug sockets, switches, shades, ceiling roses, light fittings etc complete and making good disturbed surface to match the exisitng complete all as specified & directed. | 250 | Each Point | |
| 149 | 149 | Taking down carefully sub main wiring of any nos of wire with wire on wooden batten or surface conduit or concealed conduits complete all as specified & directed. | 275 | RM | |
| 150 | 150 | Taking down main switches, distribution boards and cut outs of any capacity along with the exisitng boards and removing the same from site and making good disturbed surface or portion of walls complete all as specified & directed. | 8 | Each | |
| 151 | 151 | Concealed Point wiring with PVC Insulated 1.5 Sqmm multi-stranded copper conductor FRLS cable 1100 Volts grade drawn into and including concealed PVC conduit medium grade not less than 20mm dia (ISI marked) including all fitting and fixings accessories including 1.25 mm thick factory fabricated sunken pressed steel terminal boxes duly painted with one coat of anti-corrosive paint outside and two coats of aluminium paint inside with and including 2.8 mm thick top cover hylam brand plastic laminated white sheet cover for mounting switches, sockets, fan regulators fixed with steel screws with cup wahsers and including PVC Insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed for following point wirings:--- | |||
| 152 | 152 | (a) One light / fan point controlled by one switch | 158 | Each Point | |
| 153 | 153 | (a) One light point controlled by two, two way switch | 4 | Each Point | |
| 154 | 154 | (c) One buzzer or bell point controlled by one switch | 8 | Each Point | |
| 155 | 155 | (d) One socket point 3 pin switch socket out let 5 Amp controlled by one switch on same board. | 24 | Each Point | |
| 156 | 156 | (e) One socket point 3 pin switch socket out let 5 Amp controlled by one switch on Independent board. | 32 | Each Point | |
| 157 | 157 | Description same all as per item No. 151 here in above but with 1100 Volts grade copper stranded conductor FRLS cable of size 4.0 Sqmm with 2.5 Sqmm multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp Independent board complete all as specified & directed. | 24 | Each Point | |
| 158 | 158 | Switch piano flush type single pole one way 5 Amps flush type complete all as spicified & directed. | 214 | Each | |
| 159 | 159 | Switch piano flush type single pole one way 15 Amps flush type complete all as spicified & directed. | 24 | Each | |
| 160 | 160 | Switch piano flush type single pole two way 5 Amps flush type complete all as spicified & directed. | 8 | Each | |
| 161 | 161 | Bell push 5 Amps flush type complete all as spicified & directed. | 8 | Each | |
| 162 | 162 | Socket out let 3 pin 5 Amps complete all as spicified & directed. | 56 | Each | |
| 163 | 163 | Switch socket combination 2 in 1, 3 pin / 5 Amp and 15 Amps flush type of polycabonate body complete all as specified & directed. | 16 | Each | |
| 164 | 164 | Ceiling rose surface bakelite type 60x30 mm three terminals of polycarbonate body complete all as specified & directed. | 128 | Each | |
| 165 | 165 | Lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed. | 32 | Each | |
| 166 | 166 | Electronic fan regulator flush type suitable for ceiling fan complete all as specified & directed. | 24 | Each | |
| 167 | 167 | Electric ding dong bell AC operated on 230 Volts complete all as specified & directed. | 8 | Each | |
| 168 | 168 | Sub main wiring with two single core PVC Insulated cable two run of size 4 Sqmm multi-stranded copper conductor FRLS cables drawing into and including PVC conduit, medium grade not less than 20 mm dia with all conduit accessories and one run of 4 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire complete all as specified and directed. \nNote : - Three runs of 4 Sqmm cable shall be measured as one unit run. | 275 | RM | |
| 169 | 169 | Batten light fittings 1x18 watt four feet long decorative box type [Ultra slim] linear LED [6000K] with extruded aluminium body heat shrink, envoirement friendly, energy efficient prewired and making necessary electric connection from ceiling rose wit h23/.0076 flexible three core copper wire 1.0 RM long & fixed to wall firmly complete all as specified & directed by Engineer-in-Charge.\nMake : E-Lite LED Pride PLus-18W of Havells Cat Part No LHEXBLP7PN1W018 / Crompton Trim Linea Cat Part No LCTL-18 CDL / Bajaj Cat Part No BCLSB18W as approved by GE. | 40 | Each | |
| 170 | 170 | LED bulk head light fittings 10 watt with enclosed in polycarbonate body weather proof with co-extruded poly carbonate body, envoirement friendly, energy efficient prewired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire & fixed to wall firmly complete all as specified & directed by Engineer-in-Charge.\nMake : Philips Endura LED-Bulkhead Cat No. WT202W LED 6S CW SI PC or Havells Model Endura Rugby Cat Part No LHEOAOP7UZ6W010 or equivalent make in Crompton or Bajaj as approved by GE. | 10 | Each | |
| 171 | 171 | Building security / street LED light fitting 36 watt IP-65 protection making electrical connection from existing junction box with 2.5 Sqmm twin core copper wire 1.5 long complete fixed with 25 mm dia GI pipe medium grade bracket [1.2 m long & bent to required shape] and fixed with flat iron 40x6 mm clamp two nos with nut bolts & washers as required fixed to pole or walls complete all as specified & directed. \nMake : Phillips Cat Part No BRP409 LED CW 036 MR FG S1 PSU GR or commercially equivalent in Wipro / Havells / Crompton as approved by GE. | 4 | Each | |
| 172 | 172 | Sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed. | 8 | Each | |
| 173 | 173 | Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with & including one number MCB SP 20/25 Amps complete all as specified & directed. | 8 | Each | |
| 174 | 174 | MCB Single Pole 240Volt, 6 to 32Amps,10KA breaking capacity "B" curve ISI marked complete all as specified & directed. | 48 | Each | |
| 175 | 175 | MCB Single Pole and Neutral 240Volt, 32 Amps,10KA breaking capacity "B" curve ISI marked complete all as specified & directed. | 8 | Each | |
| 176 | 176 | Taking out existing ceiling fan or exhaust fan and kept in safe custody, cleaning and servicing the fan including painting with approved enamel paint and writing MES No and re-fixing in same places after doing point wiring work including 0.5 RM twin core copper wire for connection from ceiling rose to equipment [Ceiling fan or exhaust fan] complete all as specified & directed. | 40 | Each Job | |
| 177 | 177 | Taking out existing electric operated gyesers from walls and re-fixing on same places after cleaning, scrapping and one coat painting with synthetic enamel paint on outer surface colour as approved including making electric connection complete all as specified & directed. | 8 | Each | |
| 178 | 178 | Decorative wall light fixture suitable for 15W TU retofit CFL (B-22 base) LED 6000 K decorative ultra slim linear LED lighting fixture with extruded polycarbonate body, weather proof, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire two core from connector to ceiling rose not more than 1.2 mtr fixed on wall firmly complete all as specified & directed. \nMake : Havells Cat No CITY 4, LHFODFE1TC1W015 or commercially equivalent in Phillips/ Crompton Greaves | 24 | Each | |
| 179 | 179 | LED mirror light fitting 1 x 09 watt, LED 6000 K decorative ultra slim linear LED lighting fixture with extruded polycarbonate body environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire two core from connector to ceiling rose not more than 1.2 mtr fixed on wall firmly complete all as specified & directed. \nMake : Havells IVORY Model No LHESABP7IN1W009 or commercially equivalent in Phillips / Crompton Greaves\n | 8 | Each | |
| 180 | 180 | Earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth wire 4 mm dia as earth wire or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I) including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 15mm dia GI pipe light grade for protection of GI earth wire including PCC pit 1:2:4 type B-1 using 20mm crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm dai # TMT bars @ 100 mm centre to centre both ways i.e. horizontal and vertical complete all as directed by Engineer-in-charge and testing for required value complete.\nNote :- If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt. | 2 | Each Job | |
| 181 | 181 | Supply, fixing, testing and commissioning of LT distribution board made out of 2mm thick MS sheet of size not less than 1000x1000x150mm duly painted with two coats of synthtic enamel paint over a coat of red oxide primer wall mounted/ semi grouted in wall with locking arrangement and provision of tapping for incoming and outgoing electric connections with suitable size of lugs complete all as specified and directed. \nNote : All connection from bus bar will be copper Insulated strip of suitable size & Insulated support.\nMake : ITE Gurgaon, Asian, Pride, Universal, Shalabh\nMake of MCCB : L&T/ Schneider / ABB / Legrand\n[a] Three phase and neutral Insulated bus bar copper LT 440 Volt 200 Amp\n[b] Digital voltmeter 96x96 mm size (0-500Volt) range with selector switch -- 01 No\n[c] Digital Ampmeter 96x96 mm size (0-300 A) with selector switch and CTs -- 01 No\n[d] Indicator lamp LED type RYB --- 01 (Set of three)\n[e] MCCB 160 Amp Four Pole breaking capacity 25 KA fixed magnetic and thermal release -- 01 No [f] MCCB 40 Amp Two Pole breaking capacity 25 KA fixed magnetic and thermal release -- 08 No [g] MCB 20 Amp SPN breaking capacity 10 KA as outgoing -- 01 No [h] Fixing and connection of existing Energymeter -- 08 Nos \n[j] Name slip holder on each compartment for identification of Accn -- 08 Nos \n[k] Earthing Terminal -- 02 Nos \n | 2 | Each Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
