}

Repair To Road And Road Side Furniture For 509 Abw , Mil Wing , Sp Line , Gwalior Road , Kb Line , Ge Office , Aro , Mp Line Etc Under Age B/R-Ii Of Ge ( East ) Agra, AGRA-Uttar Pradesh

Military Engineer Services-MES has published Repair To Road And Road Side Furniture For 509 Abw , Mil Wing , Sp Line , Gwalior Road , Kb Line , Ge Office , Aro , Mp Line Etc Under Age B/R-Ii Of Ge ( East ) Agra. Submission Date for this Tender is 15-07-2021. Road Work Tenders in AGRA Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

28045822
Corrigendum : Repair To Road And Road Side Furniture For 509 Abw , Mil Wing , Sp Line , Gwalior Road , Kb Line , Ge Office , Aro , Mp Line Etc Under Age B/R-Ii Of Ge ( East ) Agra
National Competitive Bid
Indian
Uttar Pradesh
AGRA
15-07-2021

Tender Details

Repair To Road And Road Side Furniture For 509 Abw , Mil Wing , Sp Line , Gwalior Road , Kb Line , Ge Office , Aro , Mp Line Etc Under Age B/R-Ii Of Ge ( East ) Agra

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 26-Jun-2021 Corrigendum Date 15-07-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 99940.0 /-
Tender Value
INR 49.97 Lakhs /-

BOQ Items

Name of Work: REPAIR TO ROAD AND ROAD SIDE FURNITURE FOR 509 ABW, MIL WING, SP LINE, GWALIOR ROAD, KB LINE, GE OFFICE, ARO, MP LINE ETC UNDER AGE B/R-II OF GE (EAST) AGRA
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth exceeding 50 mm and not exceeding 100 mm including removal and stacking complete all as specified and directed. 150 Per Ten Sqm
2 2 M&L for continuous brick edging with using burnt clay bricks (old size bricks) of sub class B with width equal the width of brick, laid dry on end vertically including necessary earthwork and tamping ground around bricks and also removing any surplus spoil etc complete all as specified and directed. 2050 RM
3 3 M&L for 75 mm thick (compacted thickness) WBM, with (granite, trap or basalt) coarse aggregate of grading 2 (63 to 40 mm size), spread rolled and consolidated to gradient and camber required by using 8 to 10 Tonne power roller complete all as specified and directed. 110 Per Ten Sqm
4 4 All as per item No.3 here in above but except material complete all as specified and directed. 40 Per Ten Sqm
5 5 Repairs to pot holes exc. 30 mm deep and area not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth making good by applying tack coat with bituminous primer using paving bitumen VG-10 @ 5 kg per 10 Sqm, putting in premixed bitumen macadam, well rammed and sealed with binder (VG-30) 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified and directed.\nNote :- (a) Bituminous macadam shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver.\n(b) Contractor shall quote his rate on the basis of binder as mentioned in above item if there is any variation in the actual binder content used in lower side, the rate shall be adjusted. However no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A' 40 Per Ten Sqm
6 6 M&L for preparation of unsurfaced water bound macadam top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny begs to remove all loose dirt etc & applying evenly a primer tack coat with bituminous primer using paving bitumen VG-10 @ 10 Kg per 10 Sqm for laying premixed bituminous macadam premix carpet complete all as specified and directed. 150 Per Ten Sqm
7 7 M&L for premixed bituminous mcadam using paving bitumen of VG-30 grade with binder content 4% by weight of total mix and compacted to required gradient and camber laid by mechnical paver (consolidated thickness 75 mm or less) with 8 to 10 tonne vibrator roller paver complete all as specified and directed. 60 Cum
8 8 M&L for preparation existing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally the cleaned surfaces with gunny begs to remove all loose dirt etc & applying evenly a primer tack coat with bituminous primer using paving bitumen VG-10 @ 5 Kg per 10 Sqm complete all as specified and directed. 764 Per Ten Sqm
9 9 M&L for laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, (Paving bitumen VG-30) rolled and compacted with 8 to 10 tonnes power road roller to required camber and gradient complete all as specified and directed.\nNote :- (a) Premix concrete shall be mixed in hot plant, transported from plant to work site and laid / spread by means of mechanical paver.\n(b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used, the rate shall be adjusted lower side of binder used however no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A' 764 Ten Sqm
10 10 M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2.5 mm thick single coat as a arrow dashes, letters etc,on road or pavement with using retro reflective thermoplastic road marking paint of approved make applied with machine all as per manufacturer's instructions complete all as specified and directed. 530 Sqm
11 11 S&F for two way reflective road stud (SOLAR STUD)of size 125 mm x 125mm x 25 mm (shank 65 mm) alluminium alloy pressure die cast body (100% water proof design according to 65), with high efficiency mono rystafie solar panel - 2.4 V/ 0.3 watt Amber /Red/White(CAT EYE) in built 2 nos, rechargbale battery (1.2 V/1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manfuacturer instruction etc complete all as specified and directed \nNote:- Holes in road shall be drilled with drill machine and necessary cleaning of hole shall be done with blower prior to install the road stud .\n\n 250 Each
12 12 Supply and fixing metal tubular delinator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including fixed on the ground after necessary excavation and earth work in any type of soil embedding the delinator on ground with & including PCC 1:2:4 (150 x 150 x 300 mm) type B-1 for proper grouting complete all as specified and directed. 100 Each
13 13 S&F plastic speed bump yellow and black of size length 750 mm, width 250 mm, height 75 mm, weight and load capacity - upto 100 tonne and designed so dhynamically and compact that if can bear maximum load on it. The body of the running speed bump is made of PE material. Two highly reflective moulded in PMMA material are welded with PE base plate through ultrasonic welding process and then fixed on to the speed bump (dust and water cannot touch reflector's inside and thus it maintains its reflectivity for a long time) complete all as specified and directed. 10 RM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail