Military Engineer Services-MES has published Repair Cleaning For Runway Monsoon Drain , Runway Sign Board , Grass Cutting/Scraping Both Side Of Runway Edges ( 2 . 00 M ) From Runway Edge And Repair Replacement Of Existing Under Ground Cable For Lighting Of Sign Board At Runway At Af Stn Under . Submission Date for this Tender is 26-06-2021. Runway Tenders in TEZPUR Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Jun-2021 | Revised Page | Technical Bid | 19-06-2021 |
| 2 | 19-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-06-2021 |
| Name of Work: Repair/cleaning of runway monsoon drain, runway sign board, grass cutting/scrapping both side of runway edges (2.00M from runway edge) and repair /replacement of existing ground cable for lighting of sign board at Runway at AF Station Tezpur under GE (AF) Tezpur | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Cleaning of drains by removing silt, taking out brick bats, pebbles, muds, clay sludge etc from the bottom of drain and culvert bed and removing to a distance not exc 50 m and deposited where directed complete all as specified and directed. | 1200 | Cum | |
| 2 | 2 | M & L for old size old sub class B bricks, laid flat jointed in cement mortar (1:6), as in drain and pointed in cement mortar (1:3) received from dismantling of old brickwork laid flat in floors, channels, kerbs, apron etc(each layer) pointed in any mortar including removing mortars from bricks and reusing them complete all as specified and directed.\n | 570 | Sqm | |
| 3 | 3 | M & L for old size sub class B bricks laid flat jointed in cement mortar (1:6), as in drain, and pointed in cement mortar (1:3) after dismantling of bricks laid flat in floors, channels, kerbs, apron etc(each layer) pointed in any mortar complete all as specified and directed. | 620 | Sqm | |
| 4 | 4 | M & L for old size old sub class B bricks, laid on edge, jointed in cement mortar (1:6), as in drain and pointed in cement mortar (1:3) received from dismantling of old brickwork laid on edge in floors, channels, kerbs, apron etc(each layer) pointed in any mortar including removing mortars from bricks and reusing them complete all as specified and directed.\n | 130 | Sqm | |
| 5 | 5 | M & L for old size sub class B bricks, laid on edge, jointed in cement mortar (1:6), as in drain, and pointed in cement mortar (1:3) after dismantling of bricks laid on edge in floors, channels, kerbs, apron etc(each layer) pointed in any mortar complete all as specified and directed. | 150 | Sqm | |
| 6 | 6 | M & L for PCC (1:3:6) type C2 ( using 40mm graded broken stone aggregate) as in foundation of surface channels and drain after demolition of plain cement concrete unreinforced in ground floors and paving not exc 15 cm in thickness ( below or above ground level) complete all as specified and directed. | 4 | Cum | |
| 7 | 7 | M & L for providing cement concrete (1:2:4) type B0 (using 12.5 mm graded broken stone aggregate) as in coping, benching to manholes,water troughs and like including weathering slightly rounded or chamfered angles and throathing and including necessary formwork after demolition of plain cement concrete unreinforced in ground floors, paving etc not exc 15 cm in thickness ( below or above ground level) complete all as specified and directed. | 2 | Cum | |
| 8 | 8 | M & L for flush pointing to bricks laid on edge as in paving built in cement mortar (1:4) , concrete surface after raking/cutting out joints/pointing to brick work in walls including removal of all vegetation from joints or to bricks on edge in surface drain, built in cement mortar not less than 12 mm deep washing the joints, removing rubbish complete all as specified and directed. | 55 | 10 Sqm | |
| 9 | 9 | M & L for flush pointing to bricks laid flat paving in cement mortar (1:4), after raking/cutting out joints/pointing to brick work in walls including removal of all vegetation from joints in surface drain, built in cement mortar not less than 12 mm deep washing the joints, removing rubbish complete all as specified and directed. | 250 | 10 Sqm | |
| 10 | 10 | Removal of vegetation and cleaning of sides and bottoms of drains and removing all vegetation bushes /small tree n exc 30 cm girth at 1.00 m height from GL, grass cutting/scraping both side of runway edges( 2.00 m from runway edge and removing to a distances n. exc. 50 mtrs and deposited where directed by Engineer-in-Charge. | 9600 | Sqm | |
| 11 | 11 | Labour only for removal of vegetation and cleaning of sides of runway incl. removal from site and disposed off within 50 m distance by using diesel driven mechanical grass cutting machine manually operated and cutting upto 1 cm height of grass to maintain the greenary of the sides of runway complete all as specified and directed. | 36000 | Sqm | |
| 12 | 12 | M & L for brick work with locally available best quality sub class B old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM (1:4) concrete articles after demolition of Brickwork, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed. | 2 | Cum | |
| 13 | 13 | M&L for rendering 15 mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces finish even and smooth without using extra cement complete all as specified and directed. | 17 | Sqm | |
| 14 | 14 | M&L 50 mm thick cement concrete type C-2, 1:3:6 ( 40 mm graded aggregate) as in floor and finished even & rough including demolition of PCC,rendering 5 mm thick plaster in CM (1:3) on concrete surfaces finish even and smooth without using extra cement and applying one coat of water based black road marking paint complete all as specified and as directed. | 150 | Sqm | |
| 15 | 15 | Racking out joints/cracks 10-20 mm wide and 30 mm deep of rigid/flexible portion of runway , cleaning the surface by removing old sealing compound,then primed and filled with sealing compound grade B all as specified and as directed. \n(Note:Any additional depth found it should be filled with dry sand before joint filling.) | 1000 | Rm | |
| 16 | 16 | S&F in repair sign board of size 1.20 m x 0.80 m made out of 12 mm thick celluka ply including pasting of retro reflective sheet of high intensity grade type -IV on celluka ply, letters and arrow are made up of vinyl sheet on retro reflective sheet, the size of letter shall be of 40 cm height and width 24.80 cm or as proportionately, two no post for the board shall be made of PVC rectangular section of size 50mmx36mm, 1.20 metres height, two single sided lettering boards shall be fixed on both sides of post to form a composite both sided single unit including solvent adhesive and screwing and nailing for joint purpose, board shall be covered from top using 5 mm thick polyurethane foam sheet, the material shall be of fire proofing, flexible to bear wind pressure and fragile in case of collision including necessary excavation, grouted in PCC 1:3:6: type C2(30 cmx30 cmx30cm) letter in alternate board with alpbabets / numbers as (A to Z or 1 to 10 - both side with arrow of 40 cm long complete all as specified and as directed. \nNote: One letter as per requirement on both side of board including arrow shall be provided on each board, therefore requirement of letter shall be got decided from the Engineer-in-Charge. | 5 | Each | |
| 17 | 17 | S&F in repair single face lettering sign board of size 2.70 m x 0.80 m made out of 12 mm thick celluka ply including pasting of retro reflective sheet of high intensity grade type -IV on celluka ply, letter,dashes and lines are made up of vinyl sheet on retro reflective sheet, the size of letter shall be of 40 cm height, width 34 cm, two nos post for the board shall be made of PVC rectangular section of size 50mmx36mm, 1.20 metres height, board shall be covered from top using 5 mm thick polyurethane foam sheet, the material shall be of fire proofing, flexible to bear wind pressure and fragile in case of collision including necessary excavation, grouted in PCC 1:3:6: type C2(30 cmx30 cmx30cm),complete all as specified and as directed. \nNote-Size of dashes and lines as per requirement shall be got decided from the Engineer-in-Charge. | 10 | Each | |
| 18 | 18 | S&F in repair single face lettering sign board of size 1.80 m x 0.80 m made out of 12 mm thick celluka ply including pasting of retro reflective sheet of high intensity grade type -IV on celluka ply, letters,dashes and lines are made up of vinyl sheet on retro reflective sheet, the size of letter shall be of 40 cm height, width 34 cm, two nos post for the board shall be made of PVC rectangular section of size 50mmx36mm, 1.20 metres height, board shall be covered from top using 5 mm thick polyurethane foam sheet, the material shall be of fire proofing, flexible to bear wind pressure and fragile in case of collision including necessary excavation, grouted in PCC 1:3:6: type C2(30 cmx30 cmx30cm),complete all as specified and as directed. \nNote-Size of dashes and lines as per requirement shall be got decided from the Engineer-in-Charge. | 4 | Each | |
| 19 | 19 | S&F in repair single face lettering sign board of size 4.00 m x 0.40 m made out of 12 mm thick celluka ply including pasting of retro reflective sheet of high intensity grade type -IV on celluka ply, letters and arrow are made up of vinyl sheet on retro reflective sheet, the size of letter shall be of 20 cm height and width as proportionately, four nos post for the board shall be made of PVC rectangular section of size 50mmx36mm, 1.20 metres height, board shall be covered from top using 5 mm thick polyurethane foam sheet, the material shall be of fire proofing, flexible to bear wind pressure and fragile in case of collision including necessary excavation, grouted in PCC 1:3:6: type C2(30 cmx30 cmx30cm), letters/numbers (VOR 117.9 215' 0.59 NM) in black colour written on the board with yellow background ,complete all as specified and as directed. \nNote-Size of letters/nos as per requirement shall be got decided from the Engineer-in-Charge.\n | 2 | Each | |
| 20 | 20 | M&L cutting pot holes/corners cracks of existing rigid pavement to depth of 25 mm to 36 mm made into regular shape and size. Cleaning the cut portion with hard brushes, water under pressure and drying the cleaned surface with mechnical driven air blower. Removing all the foreign materials to a distance exc 100 mtrs but not exc 200 mtrs from working site. Preparation of epoxy resin materials of approved make with mixing araldite and hardener in proportion as per manufacturers instructions.The cut portin of rigid pavement applying primer with epoxy resin all sides and bottom of cut portion before putting epoxy mortar. Filled the cut portion of rigid pavement with epoxy resin mortar (1:5) one part of epoxy resin and five part of Quartz sand, levelled the filled epoxy mortar by trowels to level surace match with existing surface complete all as specified and as directed. | 5 | Sqm | |
| 21 | 21 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 4.0 core | 650 | RM | |
| 22 | 22 | Supply and fix in replacement wall mounted LED batten light 20 watt 4000k ,exturded aluminium heat sink provided for eficient heat dissipation & integrated electronic driver complete and connecting up with twin core twisted flexible copper cable of suitable size complete all as specified and directed. | 24 | Each | |
| 23 | 23 | S & F cable junction box IP 66, halogen free and weather proof for outdoor installation of street lights, of size (200x160x98) mm fixed on pole complete with terminals after dismantling, existing U/S street light junction boxes any sizes & type, disconnection of existing cable connection/re-connection of cables etc complete incl, supply & fixing M.S flat iron clamps of suitable size complete all as specified and directed. | 4 | Each | |
| 24 | 24 | S & F in repair for MCB four pole 16 Amp 10 KA ` C SERIES including making connection complete all as specified and directed. | 2 | Each | |
| 25 | 25 | M&L boring of horizontal holes /trenchless hole for 40 mm bore pipe under the road below .40 mtr from the road/hard surface by trencheless technology using ultrasonic technique and including necessary machine without damaging the existing surface and getting out in any type of soil and disposal of soil to a distance not exceeding 50 m from the site of work complete all as specified and directed . \nNote: GI Pipe Shall bemeasured and paid seperately. | 24 | RM | |
| 26 | 26 | M&L 40mm bore GI tube medium grade (IS-1239) with all fitting laid in trenches or fixed to wall, ceiling floor with necessary fixture complete all as specified and as directed. | 86 | RM | |
| 27 | 27 | Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying under ground LT XLPE cable and getting soft/loose soil complete all as specified and directed.. | 80 | Cum | |
| 28 | 28 | Returning , filling in including spreading, levelling, watering and well ramming in laying not exceeding 25 cm thick in soft/loose soil complete all as specified and directed. | 60 | CUM | |
| 29 | 29 | Removing excavated material (soils) to a distance not exceeding 50 m and depositing whare directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. | 20 | CUM | |
| 30 | 30 | M&L for river fine sand, washed and screened dry for caushioning to under ground cable in trenches below and around under ground cable including spreading and levelling punning all as specified and directed. | 2 | CUM | |
| 31 | 31 | M&L for laying bricks, sub class'B' for protection of cable, in trenches, laid in dry flat across the cable with length of whole bricks complete all as specified and directed. | 4 | Per 1000 Nos | |
| 32 | 32 | S&F flexible wire 1.0 Sqmm including making connection complete all as specified and as directed. | 20 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
