}

Provn Of Deficient Office Accn For Cwe Nagpur , Addn/ Altn Toilet Block Near Bldg No T-18 , Aro Office Complex And Ncc Otm Accn And Special Repair To Bldg No . 4F , 4 ( F ) B And 1/F At Fort Area , Nagpur . , NAGPUR-Maharashtra

Military Engineer Services-MES has published Provn Of Deficient Office Accn For Cwe Nagpur , Addn/ Altn Toilet Block Near Bldg No T-18 , Aro Office Complex And Ncc Otm Accn And Special Repair To Bldg No . 4F , 4 ( F ) B And 1/F At Fort Area , Nagpur . . Submission Date for this Tender is 24-06-2021. Building Work Tenders in NAGPUR Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

28014689
Corrigendum : Provn Of Deficient Office Accn For Cwe Nagpur , Addn/ Altn Toilet Block Near Bldg No T-18 , Aro Office Complex And Ncc Otm Accn And Special Repair To Bldg No . 4F , 4 ( F ) B And 1/F At Fort Area , Nagpur .
Open Tender
Indian
Maharashtra
NAGPUR
24-06-2021

Tender Details

Provision Of Deficient Office Accn For Cwe Nagpur , Addn / Altn Toilet Block Near Bldg No T-18 , Aro Office Complex And Ncc Otm Accn And Special Repair To Bldg No . 4F , 4 ( F ) B And 1 / F At Fort Area , Nagpur .

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 28-May-2021 CORRIGENDUM_01 Date 17-06-2021
2 17-Jun-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 24-06-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 66000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: PROVN OF DEFICIENT OFFICE ACCN FOR CWE NAGPUR, ADDN/ ALTN TOILET BLOCK NEAR BLDG NO T-18, ARO OFFICE COMPLEX AND NCC OTM ACCN AND SPECIAL REPAIR TO BLDG NO. 4F, 4(F) B AND 1/F AT FORT AREA, NAGPUR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Surface dressing n.exc 15 cm deep in hard/dense soil, complete all as specified and directed. 140 Sqm
2 2 Excavation in trenches n exc 1.5m in deepth and 1.5m in width and getting out in Soft/ disintegrated rock, complete all as specified and directed. 27.5 Cum
3 3 Excavation in trenches for laying of cable trench, pole and stay foundation in any type of soil not exc 1.5 m wide and not exc 1.5 deep and getting out , complete all as specified and directed. 14.85 Cum
4 4 Excavation in trenches n exc 1.5m in deepth and 1.5m in width and getting out in hard dense soil , complete all as specified and directed. 46.1 Cum
5 5 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in Soft/ disintegrated rock, complete all as specified and directed. 22.9 Cum
6 6 Ditto all as per item No. 5.00 above but in Hard/ dense soil, complete all as specified and directed. 10 Cum
7 7 Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point, complete all as specified and directed. 19.5 Cum
8 8 Ditto all as per item No. 7.00 above but for rock, complete all as specified and directed. 1.05 Cum
9 9 Material and labour for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) in foundation, mass concrete and filiings, complete all as specified and directed. 10 Cum
10 10 Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering , complete all as specified and directed. 27.2 Cum
11 11 Material and labour hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path , complete all as specified and directed. 13.6 Cum
12 12 Cement concrete in steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers,Type C1 1:3:6 ( using 20mm graded stone aggregate), complete all as specified and directed. 0.5 Cum
13 13 Material and labour for cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as in lintels up to 1.5m clear span, cills, steps, seismic bands and other similar bands, parapets, copings, benching, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating incl waste formwork , complete all as specified and directed. 0.5 Cum
14 14 Material and labour 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) for floor sub base, complete all as specified and directed. 95 Sqm
15 15 Material and labour 75mm thick cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in plinth protection, complete all as specified and directed. 64 Sqm
16 16 Material and labour vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shade area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or coloured cement to match over 15mm cement screed bed in cement mortar 1:4 , complete all as specified and directed. 178.1 Sqm
17 17 Material and labour vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shade area of each tile not exceeding 0.36 sqm in Skirting etc set and jointed in neat cement slurry and pointed in site or coloured cement to match including rendering 10mm thick in cement mortar 1:3 , complete all as specified and directed. 6 Sqm
18 18 Material and labour joint free coloured non skid ceramic tiles 7 to 8 mm thick (square or rectangular) area of each tile exc 0.06 sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or coloured cement to match over 15mm cement screed bed in cement mortar 1:4 , complete all as specified and directed. 50 Sqm
19 19 Material and labour coloured glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or coloured cement to match including rendering 10mm thick in cement mortar 1:3, complete all as specified and directed. 197 Sqm
20 20 Material and labour Form work to side of concrete in foundation, footing base, base of columns, side and soffits of plinth beam and simillar work, complete all as specified and directed. 66.6 Sqm
21 21 Material and labour for providing reinforcement cement concrete M-25 (Design Mix) as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc , complete all as specified and directed. 12.4 Cum
22 22 Material and labour Form work to side of columns and simillar work, complete all as specified and directed. 80.4 Sqm
23 23 Material and labour for providing reinforcement cement concrete M-25 (Design Mix) as in columns and pillars etc , complete all as specified and directed. 6.1 Cum
24 24 Material and labour Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work, complete all as specified and directed. 51.2 Sqm
25 25 Material and labour for providing reinforcement cement concrete M-25 (Design Mix) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc , complete all as specified and directed. 5.5 Cum
26 26 Material and labour Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) , complete all as specified and directed. 9.7 Sqm
27 27 Material and labour for providing reinforcement cement concrete M-25 (Design Mix) as in slabs supported on walls, beams and columns etc , complete all as specified and directed. 1 Cum
28 28 Material and labour mild steel TMT bars 10mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (annealed) wire not less than 0.90mm dia, complete all as specified and directed. 1786 Kg
29 29 Material and labour for TMT bars of 8 to 10 mm dia and over cut to length, bent to shape required and binding with mild steel wire (annealed) not less than 0.90 mm in stirrups, spacers and binders, complete all as specified and directed. 308 Kg
30 30 Material and labour mild steel TMT bars 5 to 10mm dia a as in stirrups, spacers and binders , complete all as specified and directed. 500 Kg
31 31 Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. 68.3 Cum
32 32 Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 but half brick wall , complete all as specified and directed. 11 SQM
33 33 Material and labour Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed. 169.4 Sqm
34 34 Material and labour for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instruction , complete all as specified and directed.\nNote: WPC shall be measured separately. 398.6 Sqm
35 35 Material and labour for Rendering 15mm thick in cement mortar 1:6 , finished even and smooth without using extra cement , complete all as specified and directed. 145 Sqm
36 36 Material and labour Preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer, complete all as specified and directed. 398.6 Sqm
37 37 Material and labour for complete removal of existing treatment on wall and preparation of surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint as primer, complete all as specified and directed. 255 Sqm
38 38 Supply and Fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement and with aluminium (anodised) grill made out of 7mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturer's catalogue 7 specifications, complete all as specified and directed.\nMake: Grill No. 20 of 'DECO GRILL' or as approved by GE.\nNotes :\n (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; \n(ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; \n(iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint\nMake of Aluminium Sections powder coated : Jindal or equivalent of JINDAL. 13.9 Sqm
39 39 Supply and Fix Anodized aluminium(powder coated) frame for doors,window,ventilator with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. 71.5 Kgs
40 40 Supply and Fix aluminium (powder coated) door, window, ventilator shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, ruber neoprene packing. handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc, complete all as specified and directed. 9.14 Sqm
41 41 Supply and Fix for mild steel Mortice lock, vertical type, size 100 mm 4 lever, complete all as specified and directed. 2 Each
42 42 Supply and Fix 5.5 mm thick tinted glass fixed with necessary rubber gasket and aluminum beading , complete all as specified and directed. 9.55 Sqm
43 43 Supply and Fix 4.8mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel, complete all as specified and directed. 1.5 Sqm
44 44 Supply and Fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing, complete all as specified and directed. 101.6 RM
45 45 Supply and fix factory made solid Panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of MS tubes for top and bottom rails ,MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail and bottom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stile and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.. 29.9 Sqm
46 46 Material and labour for machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and directed. 1.1 Sqm
47 47 Material and labour for pre- polished Granite (of any type) work (table rubbed and polished) in steps, jams , pillars; cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite including necessary notching, chamfering the edges , complete all as specified and directed. 1.1 Sqm
48 48 Supply and Fix in repairs Bowl for Coupled WC with UF soft close seat cover, Hinges, fixing accessories set and Accessories set, size 365X630X750mm, P Trap-180mm (Jaquar Cat No FNS-WHT-40751S) and cistern with cistern fittings for 40751P&S (Jaquar Cat No - FNS-WHT-40201) Jaquar or as specified in makes, complete all as specified and directed. 1 Each
49 49 Supply and Fix in repairs Vitrous china wash basin, size 500x420x190mm, Table top type fixed in granite or table, complete all as specified and directed.\nMake Jaquar(Cat No-FLS-WHT-40931) or as specified in makes. 1 Each
50 50 Supply and Fix Wash Hand basin ( flat back or angle back )of size 550 X 400 MM white including , waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe, complete all as specified and directed. 10 Each
51 51 Supply and Fix 32mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. 11 Each
52 52 Supply and Fix in repair brass CP fancy type 15mm bore pillar tap, complete all as specified and directed. 11 Each
53 53 Supply and Fix PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed. 31 Each
54 54 Supply and Fix in repairs vitreous china wash down water closet ( pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device, complete all as specified and directed. 4 Each
55 55 Supply and Fix in repairs 10 litre capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc, complete all as specified and directed. 10 Each
56 56 Supply and Fix in repairs 15 mm bore chromium plated bib taps, cast copper alloy, Fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. 10 Each
57 57 Supply and Fix in repairs 15mm dia brass C.P fancy Type stop valves, complete all as specified and directed. 30 Each
58 58 Supply and Fix in repairs Single lever Tall boy with 155mm extension boby fixed Spout without popup waste system with 600mm long Braided hoses , complete all as specified and directed. \nMake : Jaquar (Kubix Prime Cat No:KUP-35005 BPM) or as specified in makes. 1 Each
59 59 Supply and Fix in repairs 2 way bib cock with wall fange, complete all as specified and directed.\nMake : Jaquar (Kubix Prime Cat No:KUP-35041PM) or as specified in makes. 4 Each
60 60 Supply and Fix in Repairs Angular Stop Cock with wall Flange , complete all as specified and directed.\nMake : Jaquar (Kubix Prime Cat No:KUP-35053PM) or as specified in makes. 2 Each
61 61 Supply and Fix Hand shower (health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & wall Hook, complete all as specified and directed.\nMake : Jaquar (Cat No ALD-565) or as specified in makes. 5 Each
62 62 Supply and Fix Towel ring square fixed to walls with chromium plated (CP) brass screws , complete all as specified and directed.\nMake Jaquar (AKP-35721P) or as specified in makes. 2 Each
63 63 Supply and Fix Single Towel Rail 600mm Long, Stainless steel fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. \nMake: Jaquar (AKP-35711PS) or as specified in makes. 1 Each
64 64 Dismantling water tanks 1000 ltr capacity and removing to store, complete all as specified and directed. 2 Each
65 65 Supply and fix Rotational moulded polythene water storage tank 1000 ltr capacity ( cylindrical vertical with closed top ) hoisted and fixed in position, complete all as specified and directed. 6 Each
66 66 Supply and Fix 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium . rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15nun-142gms/ 20mm-210gms./ 25nun-455gms/40nun - 690 gms , complete all as specified and directed. 6 Each
67 67 Taking up or down15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. 40 RM
68 68 Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. 35 RM
69 69 Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc , complete all as specified and directed. 100 RM
70 70 Ditto all as per item No. 81 above but 20mm bore, complete all as specified and directed. 70 RM
71 71 Supply and fix 15 mm bore medium grade with all fitting & fixed to wall including taking up or down existing GI tubing, complete all as specified and directed. 15 RM
72 72 Ditto all as per item No. 71 above but 20mm bore, complete all as specified and directed. 20 RM
73 73 Supply and fix 20 mm bore gun metal gate valve with iron wheel head,screwed both ends , complete all as specified and directed. 1 Each
74 74 Supply and Fix CP grating of size 100mm dia complete all as specifed and directed , complete all as specified and directed. 2 Each
75 75 Supply and fix PVC(SWR) pipe grade 'B'110 mm dia single socketed in any length with rubber ring joint , laid in trenches or in floor , complete all as specified and directed. 3 RM
76 76 Supply and fix 110 mm bore PVC (SWR) bend any radius, complete all as specified and directed. 14 Each
77 77 Supply and fix PVC(SWR) Vent cowl 110 mm bore, complete all as specified and directed. 14 Each
78 78 Supply and fix 110 mm bore PVC (SWR) junction single 'T' equal or unequal , complete all as specified and directed. 1 Each
79 79 Supply and fix 50 mm dia High density polyethylene pipes ( HDPE ) of pressure rating 6 Kgf/ Sqcm fixed complete to walls , ceiling or in floors, complete all as specified and directed. 2 RM
80 80 Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar , complete all as specified and directed. 50 Rm
81 81 Material and labour for salt glazed stone ware drain pipe 150 mm dia laid on concrete bed in trenches, complete all as specified and directed. 70 RM
82 82 Material and labour for PCC 1:3:6 type C-2 concrete bed to drain pipe 150 mm dia including packing under and completely sorrounding pipes with concrete after thay are laid and tested , complete all as specified and directed. 70 RM
83 83 Material and labour extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends , complete all as specified and directed. 3.6 RM
84 84 Material and labour for precast R.C.C (1:1 1.5:3) type A1 (using 20 mm graded stone aggregate ) as in manhole cover slab and set in cement mortar 1:4 , complete all as specified and directed. 0.65 Cum
85 85 Supply and Fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. 326 Sqm
86 86 Supply and Fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed. 23.5 Sqm
87 87 Supply and Fix Mild steel sheet eaves gutters 1.25mm thick 150mm dia, galvanised class 3, half round with rounded edges etc , complete all as specified and directed. 35.5 RM
88 88 Material and labour 4mm thick for Non Asbestos, fibre reinforced designer cement ceiling board of size fixed over snap grid frame work for false ceiling comprising of the following section for making partition of 600x600mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main tee shall be 32mm x 24mm x 0.30mm, cross tee shall be 28mm x 24mm x 0.30mm thick with Black lining in mild portion and wall angle shall be 24mmx24mmx0.30mm thick, complete all as specified and directed. 205 Sqm
89 89 Supply and Fix 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in Aluminium doors, complete all as specified and directed. 28.8 Sqm
90 90 Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc conforming to IS 1161-1979 grade Fe 410-W (Gde- E- 250) quality, complete all as specified and directed. 754.8 Kg
91 91 Material and labour for Steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to I. S.1161- 1979 grade St.-240 etc conforming to IS 1161-1979 grade Fe 410-W (Gde- E- 250) quality, complete all as specified and directed. 697.2 Kg
92 92 Supply and Fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment grade Fe 410-W (Gde- E- 250) quality, complete all as specified and directed. 70.65 Kg
93 93 Supply and Fix MS screw bolts of dia 5-10 mm ( machine made ) with hexagonal or square at one end and screwded with other end or screwed both ends length of bolt n exc 15cm long , complete all as specified and directed. 14.8 Kg
94 94 Preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint , complete all as specified and directed. 110.4 Sqm
95 95 Material and labour for preparation of old steel surafces of any description over 10 cm width or girth & applying one coat of synthetic enamel paint over a coat of primer, complete all as specified and directed. 5 Sqm
96 96 Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of primer, complete all as specified and directed. 12.9 Sqm
97 97 Supply and Fix Curtain rod with a telescoping brackets to fit both rod and mounting hardware modular type , complete all as specified and directed. 19 Rm
98 98 Supply and Fix in repair Prayag wall cabinet Mirror (500x400Appx) , complete all as specified and directed.\nMake- Prayag , CAT No.: 556 or as specified in Makes. 2 Each
99 99 Dismantling of asbestos cement sheet (corrugated , semi-corrugated etc) sheets in roof coverings, complete all as specified and directed. 172 Sqm
100 100 Dismantling mild steel work of any description not otherwise provided, complete all as specified and directed. 16.8 Qtl
101 101 Dismantling wall and ceiling boards ( Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets , complete all as specified and directed. 95 Sqm
102 102 Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed. 130 Sqm
103 103 Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area exc 1.5 sqm but nexc 4.00 Sqm, complete all as specified and directed. 10 Each
104 104 Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area n exc 1.5 sqm, complete all as specified and directed. 9 Each
105 105 Dismantling of brick work or stone/boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles, complete all as specified and directed. 16 Cum
106 106 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing selviceable tiles to store and rubbish off the premises, complete all as specified and directed. 198.5 Sqm
107 107 Dismantling of PVC pipes (110mm/75mm bore), jointed in cement mortar and taking out of trenches/from walls including fittings as bands, branch pieces, traps etc complete all as specified and directed. 15 RM
108 108 Demolation of cement concrete of any description and in any position not otherwise specifically provided , complete all as specified and directed. 2.3 Cum
109 109 Removing existing water proofing treatment on roof including screed bed and scrubbing down with water etc and removing the same beyond premises of MD land, complete all as specified and directed. 15 Sqm
110 110 Material and labour 25mm (avg) thick cement concrete type B-0, 1:2:4 (12.5mm grade aggregate) finishing cement concrete surface even and smooth without using extra cement using water proofing liquid @ 200 ml/50 kg of cement, complete all as specified and directed. \nNote- Water proofing liquid will be measured & paid separately complete. 13.5 Sqm
111 111 Material and labour for rendering 15mm thick in Cement mortar 1:3 on concrete surface using water proofing compound as per manufacture instruction, complete all as specified and directed. 15 Sqm
112 112 Material and labour for provision of water proofing treatment by using APP torch on mineral/slate finished membrance over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sq m on clean and dry surface and then providing APP membrane having non woven. polyster film reinforcement with 3 mm thick and weight not less than 3 .00 kg/sq m and finished on top with mineral/slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps resepectely all as per manufacturers instructions, complete all as specified and directed. 15 Sqm
113 113 Material and labour for Roof trusses (framed), trussed, purlins, crane ganties, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 290 (Gde E-165), complete all as specified and directed. 2140 Kg
114 114 Supply only liquid water proofing admixture , complete all as specified and directed.\nMake-pidilite or equivalent. 8.9 Litre
115 115 Material and labour for cutting chases, pinning in, making good to facings where required and Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed cills, sunshades, shelves, lintels, etc. water tubing or concealed conduit wiring, etc. and making good, cutting exc 20cm girth , complete all as specified and directed. 105 RM
116 116 Supply and Fix 150 mm long aluminium anodised, barrel tower bolt of extruded section , complete all as specified and directed. 22 Each
117 117 Supply and Fix mild steel medium weight cold rolled 100mm size butt hinges, complete all as specified and directed. 72 Each
118 118 Supply and Fix 250mm long Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed , complete all as specified and directed. 17 Each
119 119 Supply and Fix for 150mm long aluminum handles, cast type, anodized, complete all as specified and directed. 48 Each
120 120 Aluminiumm alloy ,anodised sliding door bolt 300mm with hasp ,staple (bolt type)and fixed clip of sheet cast or extruded section and fixing bolt and sliding bolt of extructed section or cast -Aluminium alloy and fixed, complete all as specified and directed. 5 Each
121 121 Supply and Fix in repairs vitreous china squatting pan Orissa pattern 580 X 440 mm long with integral foot rest , S or P trap including connection to trap and to flushing pipe etc complete including making good to floor, complete all as specified and directed. 6 Each
122 122 Supply and Fix 600mmx450mm belvelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers , complete all as specified and directed. 4 Each
123 123 Supply and Fix in repairs 32mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed , complete all as specified and directed. 11 RM
124 124 Supply and Fix in repairs Wall mixer with provision for Overhead Shower with 115mm Long bend pipe on Upper Side, connecting Legs & wall Flanges, complete all as specified and directed.\nMake : Essco by Jaquar (Cat No:APR-101273) or as specified in makes. 6 Each
125 125 Supply and Fix in repair Overhead shower 125 mm dia round shape Single flow (ABS body chrome Plated with Gray Face Plate) with Rubit cleaning System incl Arm 240mm long, complete all as specified and directed.\nMake : Essco by Jaquar (Cat No- EOS-542A & ALE-536A) or as specified in makes. 6 Each
126 126 Supply and Fix 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement , complete all as specified and directed. 10 Each
127 127 Supply and Fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore, complete all as specified and directed. 25 RM
128 128 Material and labour for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of birla white care putty, complete all as specified and directed. 290 Sqm
129 129 Material and labour for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of birla white care putty, complete all as specified and directed. 210 Sqm
130 130 Dismantling timber scantlings in frame work 40 sq. cm and over in section, in any position , complete all as specified and directed. 0.4 Cum
131 131 Material and labour 2nd class hard wood in scantling clean sawn and unframed timber , complete all as specified and directed. 0.4 Cum
132 132 Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with cresoat oil , complete all as specified and directed. 10 Sqm
133 133 Supply and Fix and 2nd class hard wood plain solid straight chowkatSupply and Fixrame wrought framed on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and directed. 0.15 Cum
134 134 Supply and Fix 30mm thick Flush shutters solid core construction with Block board and plywood face panels commercial type both side, complete all as specified and directed. 4.7 Sqm
135 135 Supply and Fix 30 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, elc.;sizesof me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed. 1.65 Sqm
136 136 Supply and Fix framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 , complete all as specified and directed. 20 Kgs
137 137 S& F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters , complete all as specified and directed. 1.2 Sqm
138 138 Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempe-ring to match with existing wall/floor/ceiling finishes. 64 Point
139 139 Taking down sheet metal enclosure, MCBs & DB main switch etc and making good distrubed sufaces to match with exisiting surfaces. 23 Each
140 140 Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces. 100 RM
141 141 Material and labour for concealed point wiring 1100 volt grade single core PVC FRLSH insulated and unsheathed cable with multi-stranded copper conductor 1.50 Sqmm drawn in with and including electrical grade PVC conduit not less than 20 mm dia with IS 9537 (Part-III) 1983 marking, medium grade concealed on wall/ceiling as per site requirement including PVC FRLSH insulated and unsheathed cable with copper conductor of size 1.50 Sqmm as earth conductor and pressed steel terminal boxes sunk on wall for mounting modular switches, switch sockets. fan regulator, etc including modular cover with frame of any size, including making good the disturbed surfaces complete all as specified and as directed for:- (a) One light point controlled by one No. one way switch. Make of PVC conduit: Polycab / Anchor / superplast\nMake of FRLSH wire: Polycab / Havells / Finolex / L&T or equivalant\nNote: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. 42 Point
142 142 Ditto all as per item Sl No 141 above but One 3 pin 5 amps socket out let point on independent board. 8 Point
143 143 Ditto all as per item Sl No 141 above but One bell/buzzer point controlled by one bell push. 3 Point
144 144 Ditto all as per item Sl No 141 above but One ceiling/exhaust fan point controlled by one one way switch and regulator. 14 Point
145 145 Ditto all as per item Sl No 141 above but One 3 pin 5 amp socket outlet point on the same board with other switches. 18 Point
146 146 Material and labour for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit heavy duty of suitable size with all accessories such as Junction box, bend, tee, elbow etc., concealed in walls / ceilings of the following sizes :-a) 2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire. Make of PVC conduit: Polycab / Anchor / Modiplast \nNote: Accessories for point / sub main wiring like PVC junction box, bend, Tee, Elbow shall be of same make. 91 RM
147 147 All as per item Sl No. 146 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point. 11 Point
148 148 Supply and fix modular switch 1 Way 6 amp 250 volts AC ,1 Module , complete all as specified and directed.\nMake : Anchor/Roma/Legrand/Crabtree 82 Each
149 149 Supply and fix modular switch 1 Way 16 amp 250 volts AC ,1 Module , complete all as specified and directed.\nMake : Anchor/Roma/Legrand/Crabtree 11 Each
150 150 Supply and fix modular socket 6A- 2/3 pin combined 2 Module 250 volts AC ,complete all as specified and directed.\nMake :Anchor/Roma/ Legrand/ Crabtree 26 Each
151 151 Supply and fix modular socket 6A / 16A- 2/3 pin combined 2 Module 250 volts AC , complete all as specified and directed.\nMake : Anchor/ Roma/ Legrand/ Hagger 11 Each
152 152 Supply and fix ceiling rose surface type 2/3 terminal 5 amps , complete all as specified and directed.\nMake : Anchor/ Roma/ Legrand/ Crabtree 59 Each
153 153 Supply and fix in repairs LED batten fitting 2' length including drivers having energy consumption, 9-11W ,230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as directed by the Engineer-in-Charge. Make & Model : Philips Slim line 9W, CG- LCTL-9/10WCDL, Surya SLE BT 10/Bajaj BCLSB 10 W/Wipro/ Havells 18 Each
154 154 Supply and fix 18/20 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 2 core 1 sqmm copper conductor cable all as specified and as directed by Engr-in-Charge. Make & Model:- Philips Astra Line 20W/ CG -LCTL-18/20W-CDL / Bajaj BCLSB 18 W. 16 Each
155 155 Supply and fix sheet metal enclosure DB single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed.\nMake-Legrand/ Siemens/ Schneider 6 Each
156 156 Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed.\nMake- Legrand/ L&T/ Schenider/ Siemens or equivalent 1 Each
157 157 Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA.Make-Legrand/ Siemens/ Schneider 30 Each
158 158 Supply and fix Isolator/ MCB single pole and neutral 240 volt 6 to 40 amps 10 KA.Make-Legrand/ Siemens/ Schneider 7 Each
159 159 Supply and fix Exhaust fan single phase,200/230 mm sweep, PVC body with bolts, nuts, washers and connected electrically complete all as specified and as directed, Make : Bajaj, Havells, CG 9 Each
160 160 Supply & fix electric bell, ding dong AC 230 volts, single pole, complete all as specified and as directed. 3 Each
161 161 Supply and fix bell push switch modular type single pole one way 5 amp 240 volts, all as specified and as directed by EIC. \nMake: Anchor Roma/ legrand/ Crabtree. 3 Each
162 162 Supply and fix building security light LED 25/ 30 Watt with pressure die cast aluminium housing heat resistance toughened glass, IP66 protection, complete with driver with rated voltage 240 V, 50Hz, with and including mounting GI pipe (made out of 25mm dia light grade pipe) 1.2m bent to the required shape fixing with FI clamps nut bolts etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size of 230V, 50Hz from fitting to ceiling rose, complete all as specified and as directed. \nMake:Philips:BRP 020 or CG: Freedom LSTS-30-CDL or Bajaj or Wiproor equivalant 8 Each
163 163 Supply and fix Ceiling fan 1200mm sweep 230 Volts, 50Hz and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and as directed. \nMake: Bajaj/CG/Orient/Havells. or equivalent 4 Each
164 164 Supply and laying in trenches or fixing in walls/ poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq mm, 4 core including testing after laid and jointed all as specified and directed. \nMake: Polycab/ Havells/ Finolex. 60 RM
165 165 Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe of size 50mm outer diameter and 38mm inner diameter with ISI Marked [IS 14930- (Part-II)-2001, laid in trenches/floors and fixed on walls/poles, with and including necessary fittings such as bends, sockets and other connected accessories etc., for laying of electric cables, complete all as specified and directed. \nMake- Dureline/Rex/Tirupati/Cetron 55 RM
166 166 Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (.c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminium lugs etc all as specified.(e) 15mm nominal bore meduim grade GI protection pipe upto 7.50 metre long for protection of earthing lead.(f) Reguisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion. 4 Each
167 167 NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.75,077.00/- ]\n
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail