Public Works Department-PWD has published Balance Work ( Bulk Oil Tank , Laundary Works And Minor Repair Works Residential Quarters ) Of Sub District Hospital Zainapora Shopian. Submission Date for this Tender is 28-06-2021. Oil Tank Tenders in Shopian Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Jun-2021 | date extension | Date | 21-06-2021 |
| 2 | 21-Jun-2021 | date extension 2 | Date | 28-06-2021 |
| Name of Work: Balance work (Bulk oil tank, laundary works and minor repair works Residential quarters) of Sub District Hospital Zainapora Shopian. Estimated Cost Rs. 12.08 Lacs | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil | 175.54 | cum | |
| 2 | 2 | Filling with available earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 em), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of EARTH, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in -charge. | 15.55 | cum | |
| 3 | 3 | Disposal of excavated material from site to site of disposal by mechanical means upto 6 km. | 159.99 | cum | |
| 4 | 4 | Supply and filling of boulders as a SOLING media /bacfiliing incl carriage,loading and unloading complete job. | 14.5 | Cum | |
| 5 | 5 | SUPPLY anfd filling of nallah muck inside plinth including carriage, loading and unloading necessary watering and compaction in layers complete job. | 5.5 | cum | |
| 6 | 6 | Bricks work with common burnt clay F.P.S (non modular) bricks of class desi- 75 in superstructure including extra charges above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 :6(1 cement : 6 coarse sand) | 22.5 | cum | |
| 7 | 7 | Dry Random rubble masonry with hard stone in underground work in soakage pits below plinth level , including providing of lap stones | 2.65 | cum | |
| 8 | 8 | Application of internal cement sand plaster of thickness 15mm with a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement,sand. | 25.55 | Sqm | |
| 9 | 9 | Application of External cement sand plaster of thickness 15mmwith a cement sand mortar of mix 1:6 including scaffolding curing and including cost of cement,sand. | 34.43 | Sqm | |
| 10 | 10 | Providing and laying in position reinforced cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size. . | 22.25 | cum | |
| 11 | 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering1:2 :4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size. . | 12.5 | cum | |
| 12 | 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:3 :6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size. . | 6.55 | cum | |
| 13 | 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4 :8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size. | 10.5 | cum | |
| 14 | 14 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete | 6.2 | Sqm | |
| 15 | 15 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete In colour such as White, Ivory, Grey, Fume Red Brown | 3.4 | Sqm | |
| 16 | 16 | Providing and fixing of first class Kailwood glazed shutters 35mm thick for windows and clerestory windows, bright finished of required size with necessery screws, using glass pans 4mm thick (10 kg/sqm) including ISI marked MS Butt Hinges75x60x3.10 mm mm with necessaryscrews. | 1.55 | Sqm | |
| 17 | 17 | Providing and fixing of first class Kailwood wire gauge shutters 35 mm thick using stainless steel MS wire gauge with wire of dia 0.63 mm and average width of aperture 1.4 mm in both directions for windows and clerestory windows with necessary screws including with hinges and necessary screws : lSI marked M.S. pressed bright finished butt hinges 75x60x3.10 mm mm with necessary screws of required size | 1.55 | Sqm | |
| 18 | 18 | Providing and fixing of Kailwood Door shutters 35 mm thick including ISI marked MS Butt Hinges 125x90x4.00 mm with necessary screws excluding cost of panelling which will be paid separately. | 1.23 | Sqm | |
| 19 | 19 | Providing and fixing of panelling 25 to 40 mm thick of first class Kailwood in Door shutters (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured) | 0.984 | Sqm | |
| 20 | 19.1 | Providing and fixing of prelaminated kitlam panels properly decorated with timber beading Kailwood in Door shutters (Area of opening for panel inserts excluding portion of inside grooves or rebates to be measured) | 1.2 | Sqm | |
| 21 | 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. | 12.24 | Sqm | |
| 22 | 21 | Applying priming coats with Metal primerWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works | 3.55 | Sqm | |
| 23 | 22 | Applying priming coats with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) | 12.24 | Sqm | |
| 24 | 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 59.98 | Sqm | |
| 25 | 24 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | 59.98 | Sqm | |
| 26 | 25 | Providing and fixing 16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm | 2.25 | Sqm | |
| 27 | 26 | Providing and fixing of MILD steel Grill panels fabricated from mild steel sections(square bars,flats,ISA ETC.) inclusive electric,machinery charges,adhesives like araldite complete job. | 20 | KG | |
| 28 | 27 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | 1 | NO | |
| 29 | 28 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm | 1 | NO | |
| 30 | 29 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 50.34 | kg | |
| 31 | 30 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 10.5 | KG | |
| 32 | 31 | Providing and fixing of mild steel sheets 18 gauge in eaves boarding including scaffolding, c/o electrodes, electric and machinery charges complete job. | 10.5 | KG | |
| 33 | 32 | Providing and fixing of mild steel sheets 18 gauge in soffit work of chajjas, including scaffolding,c/o electrodes, electric and machinery charges complete job. | 10.5 | KG | |
| 34 | 33 | 12.1.5 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m2 | 6.1 | SQM | |
| 35 | 34 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/ m2 | 3.2 | RM | |
| 36 | 35 | .Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class kail wood | 0.2 | cum | |
| 37 | 36 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars | 1620 | KG | |
| 38 | 37 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform | 120.55 | sqm | |
| 39 | 38 | Centering and shuttering including strutting, propping etc. and removal of form for Columns,Walls Pillars, Piers, Abutments, Posts and Struts | 85 | sqm | |
| 40 | 39 | P/F of below mentioned CP fittings(Jaquar series)or equivalent including c/o screws electric and machinery charges complete job. | |||
| 41 | 39.01 | CP Brass Sink MIXER(jaquar/marc) | 1 | NO | |
| 42 | 39.02 | CP Brass Wall MIXER(jaquar/marc) | 1 | NO | |
| 43 | 39.03 | CP Brass Basin MIXER(jaquar/marc) | 1 | NO | |
| 44 | 39.04 | CP Brass Bibcock(jaquar/marc) | 1 | NO | |
| 45 | 39.05 | CP Brass Angle valve(jaquar/marc) | 1 | NO | |
| 46 | 39.06 | CP Brass Nipples 15mm dia and 20 mm long | 1 | NO | |
| 47 | 39.07 | CP Brass Grating | 1 | NO | |
| 48 | 39.08 | CP Brass Soap case | 1 | NO | |
| 49 | 39.09 | CP Brass Towel Rail with CP Brackets fixed to wooden cleats with CP Brass Screws | 1 | NO | |
| 50 | 40 | Supply, fixing, laying and jointing of GI Pipes of Variable daimeter with fittings like Elbows, Sockets, Tee's, Clamps, Plugs within the building i/c providing of Yarn at joints, inclusive eletric and machinary charge. | |||
| 51 | 40.1 | 15mm Dia GI Pipe(.5'inch)Medium | 95 | RM | |
| 52 | 40.2 | 20mm Dia GI Pipe (.75'inch))Medium | 45 | RM | |
| 53 | 41 | Supply, fixing, laying and jointing of various GI pipe fittings and water controlling devices of Variable daimeter i/c providing of Yarn at joints, inclusive eledtric and machinary charge. | |||
| 54 | 41.01 | Ball valve (1") | 2 | NO | |
| 55 | 41.02 | Ball valve (1 1/4") | 1 | NO | |
| 56 | 41.03 | Union (1") | 1 | NO | |
| 57 | 41.04 | Union (1 1/4") | 1 | NO | |
| 58 | 41.05 | Tank nipple (1") | 1 | NO | |
| 59 | 41.06 | Tank nipple (1 1/4") | 1 | NO | |
| 60 | 41.07 | Ball cock | 1 | NO | |
| 61 | 42 | Providing and fixing of sintex/comfort or equivalent overhead water tanks in attics within the grid network of pipes including managing of water supply and return with with the facilities of wash out and over flow and alignment. | 50 | ltr | |
| 62 | 43 | Providing,fixing,laying of sanitary soil and waste water PVC Prince B Pipes of variable diameter with proper alignment including jointing with solvent complete job. | |||
| 63 | 43.1 | 160mm OD UPVC Prince B Type | 5 | RM | |
| 64 | 43.2 | 110mm OD UPVC Prince B Type | 15 | RM | |
| 65 | 43.3 | 75mm OD UPVC Prince B Type | 18 | RM | |
| 66 | 44 | Supply and fixing of below mentioned PVC fittings in the sanitary system including jointing by solvent. | |||
| 67 | 44.01 | 4"floor trap | 1 | NO | |
| 68 | 44.02 | 4" p trap | 1 | NO | |
| 69 | 44.03 | 4"door bend | 1 | NO | |
| 70 | 44.04 | 4"door T | 1 | NO | |
| 71 | 44.05 | 4" Cowel | 1 | NO | |
| 72 | 44.06 | 4" cap | 1 | NO | |
| 73 | 44.07 | 3" door bend | 1 | NO | |
| 74 | 44.08 | 3" door Tee | 1 | NO | |
| 75 | 44.09 | 6" bend | 1 | NO | |
| 76 | 44.1 | 3"floor trap | 1 | NO | |
| 77 | 45 | Providing and fixing of Builders Hardware including cost of screws. | |||
| 78 | 45.01 | AlUMUNIUM Aldrops 10" | 2 | NO | |
| 79 | 45.02 | AlUMUNIUM Tower Bolts 6" | 2 | NO | |
| 80 | 45.03 | AlUMUNIUM Handles 4" | 2 | NO | |
| 81 | 45.04 | AlUMUNIUM Handles 5" | 2 | NO | |
| 82 | 45.05 | AlUMUNIUM Tower Bolts 4" | 3 | NO | |
| 83 | 46 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm | 1 | No | |
| 84 | 47 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps | 1 | No | |
| 85 | 48 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | 6 | No | |
| 86 | 49 | Supply, fixing, laying and jointing of insulation for various GI pipeline Using suitable foam exposed to environmental effects | 345 | RM | |
| 87 | 50 | Providing and fixing of water pump 1.0 H.P including starter and all accessories (compton greaves or Kirloskar make) | 1 | NO | |
| 88 | 51 | Providing and fixing of storage type vertical hot water heater (Geyser) with copper container ,insulation stove enamelled thermostatically controlled immersion heater with pilot neon lamps suitable length of electric cable,3 pin plug top,15mm dia PVC connections at the outlet(Venus, Racold,Havells)make 50 LTR. Capacity | 1 | NO | |
| 89 | 52 | Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, etc. complete. 50 mmthick with 20mm nominal size stone aggregate. (a) Crushed. Incl cost of 50 mm thick glass strips. | 18.8 | NO | |
| 90 | 53 | Providing and fixing of 4mm thick glass pans including cost of beading 25mm wide and 15mm thick incl cost of nails | 12.3 | SQM | |
| 91 | 54 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade | 25.5 | SQM | |
| 92 | 55 | Sand filling including watering and necessary compaction in layers complete job. | 79.65 | CUM | |
| 93 | 56 | Repairment of ceiling by providing and fixing of asbestos sheets | 50.23 | sft | |
| 94 | 57 | Repairment of ceiling by providing and fixing of Timber planck ceiling 12mm to 15 mm thick properly rebated and finished | 12.25 | sft |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
