Military Engineer Services-MES has published Repair , Replacement Of Boundary Wall , Fencing Gate And Area Drainage Etc For 509 Abw , Mil Wing , Sp Line , Gwalior Road , Kb Line Ge Office Aro , Mp Line Etc Under Age Br Ii Of Ge East Agra . . Submission Date for this Tender is 17-06-2021. Drainage Tenders in AGRA Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-06-2021 |
| 2 | 12-Jun-2021 | CHANGE IN DESCRIPTION | Other | 17-06-2021 |
| Name of Work: Repair/ replacement of boundary wall, fencing, gate and area drainage etc for 509 ABW, Mil Wing, SP Line, Gwalior Road, KB Line, GE Office, ARO etc under AGE B/R-II of GE (E) Agra. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | S&F in repais galvanised ,2 stand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails staining bolts incl, securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed. | 60 | 100 RM | |
| 2 | 2 | Dismantling fencing wire mesh,any type complete all as specified and directed. | 300 | Sqm | |
| 3 | 3 | Supply only GI chain link fencing any size or any type complete all as specified and directed.\n | 1290 | Kg | |
| 4 | 4 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.\nNote :- Line wire and flat iron will be measured and paid separately | 300 | Sqm | |
| 5 | 5 | S &F of Mild steel round bars Fe 290 (Gde - E-165)10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | 200 | Kg | |
| 6 | 6 | S & F screw bolts (machine made) with hexagonal or sqare heads at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts n exc 10 cm and dia of shank 16-20mm complete all as specified and directed | 70 | Kg | |
| 7 | 7 | Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) built in cement mortar complete all as specified and directed | 90 | Cum | |
| 8 | 8 | M&L for 75 mm thick Cement concrete type C2 1:3:6 (using 20 mm graded stone aggregate) in hard standing and plinth protection etc, finished even and smooth with out using extra cement complete all as specified and directed. | 300 | Sqm | |
| 9 | 9 | M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. | 4 | Cum | |
| 10 | 10 | M&L for re-inforced cement concrete Type B1 1:2:4 (20mm graded stone aggregate) (nominal mix) for slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed. | 2.5 | Cum | |
| 11 | 11 | M&L providing precast cement concrete Type B1 1:2:4 (20mm graded stone aggregate) (nominal mix) for cover slab for manhole, drain and similar articals with plane faces complete all as specified and directed. | 3 | Cum | |
| 12 | 12 | M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200mm thick (Horizantal or sloping ) for flat fair finished surfaces complete all as specified and directed | 10 | Sqm | |
| 13 | 13 | M & L formwork to edges of concrete roofs exc 10cm n esc 20cm wide for fair finished surface complete all as specified and directed. | 15 | RM | |
| 14 | 14 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | 375 | Kg | |
| 15 | 15 | Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. | 60 | Each | |
| 16 | 16 | Dismantling of wrought iron of mild steel work of any description not otherwise provided | 5.5 | Qtl | |
| 17 | 17 | S & F angle iron as in post and struts in fencing including embeding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., simillar work confirming to Fe-290 Gde E-165 complete all as specified. | 1050 | Kg | |
| 18 | 18 | M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint including preperation of surface all as specified and directred. | 10 | 10 RM | |
| 19 | 19 | M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface all as specified and directred. | 65 | Sqm | |
| 20 | 20 | M&L for one coat of synthetic enamel paint on previously treated/ un treated old steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface all as specified and directred. | 30 | Sqm | |
| 21 | 21 | Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc including removal complete all as specified and directed. | 56 | Cum | |
| 22 | 22 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. | 680 | Sqm | |
| 23 | 23 | M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. | 40 | Cum | |
| 24 | 24 | All as per item no 23 above but except brick (using old brick) | 14 | Cum | |
| 25 | 25 | M&L, rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface and finishing surface fair and even complete all as specified and directed. | 1020 | Sqm | |
| 26 | 26 | M&L, rendering 15 mm thick in CM 1:4 on surface other than fair face of brickwork or on one side of lathing and finishing surface fair and even complete all as specified and directed. | 160 | Sqm | |
| 27 | 27 | M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. | 1180 | Sqm | |
| 28 | 28 | M&L for PCC 1:3:6 type B2 (using 40mm graded stone aggregate) as in surface channel and drains manhole etc all as specified and directed. | 3.6 | Cum | |
| 29 | 29 | M&L for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in eight, copings, kneelers, apex stones bed plates, kerbs chajjas , water troughs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, fixing of chainlink all as directed incl necessary formwork etc complete all as specified and drected | 4 | Cum | |
| 30 | 30 | M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. | 5 | Cum | |
| 31 | 31 | M&L for 75 mm thick Cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing finishing surface even and rough using broomfinish complete all as specified and directed. | 600 | Sqm | |
| 32 | 32 | M&L for machine pressed coloured rubber moulded chequered tiles 30 cm x 30 cm x 20 to 25 mm thick set, jointed & pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed. | 200 | Sqm | |
| 33 | 33 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m depth for foundation and getting out in soft/loose soil etc. complete all as specified and directed. | 10 | Cum | |
| 34 | 34 | Returning filling in soft/loose soil incl. spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed. | 1 | Cum | |
| 35 | 35 | Removing surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above starting point complete all as specified and directed. | 9 | Cum | |
| 36 | 36 | M&L for raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc. complete all as specified and directed. | 3 | X Sqm | |
| 37 | 37 | M&L for flush pointing in cement mortar 1:4 to brick walls in drain/ boundary wall etc complete all as specified and directed. | 3 | X Sqm | |
| 38 | 38 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and directed. | 10 | Each | |
| 39 | 39 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other\ncovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel\nsheeting or other covering,running rails and guides) and hanging; also fastening and fixing completeall as specified and directed. | 400 | Kg | |
| 40 | 40 | Ditto all as per item no 39 above but as in ornamental gate including fixing of pivot at bottom of gate. | 400 | Kg | |
| 41 | 41 | M&L for 1.00mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed. | 27 | Sqm | |
| 42 | 42 | Demolition of PCC Kerb stone any size and shape any description and in any position complete all as specified and directed.. | 100 | RM | |
| 43 | 43 | M&L for 15 mm thick screed bed or bedding layer in CM (1:6) for laying kerb stone complete all as specified and directed.. | 15 | Sqm | |
| 44 | 44 | M&L for PCC 1:2:4 type B1 moulded precast kerb stone of size as directed including jointed, pointed in cement mortar 1:4 embeding in the ground to a depth as indicated, taping earth around kerb stone and also removing surplus soil etc complete all as specified and directed. | 2 | Cum | |
| 45 | 45 | M&L preparation of newly concrete surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of priming paints complete all as specified and directed. . | 30 | Sqm | |
| 46 | 46 | M&L preparation of old concrete surfaces of any description over 10cm girth or width not otherwise described and applying one coat of acrylic emulsion paint complete all as specified and directed. . | 150 | Sqm | |
| 47 | 47 | M&L for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed. | 250 | Sqm | |
| 48 | 48 | M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. \nNote : Sand cusion shall be measured & paid separately | 250 | Sqm | |
| 49 | 49 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 10mm thick plaster in CM 1:4.complete all as specified and directed. | 35 | Sqm | |
| 50 | 50 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. | 16 | Sqm | |
| 51 | 51 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) for in steps, jambs, pillars, window-cills, cooking platforms and like cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. | 5 | Sqm | |
| 52 | 52 | M&L Writing Letters of Figures with 1 mm thick stainless steel sheet of grade 304 (Block, Roman, Italic or Indian) not exc. 20cm high over granite stone complete all as specified and as directed. | 50 | Each | |
| 53 | 53 | M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed. | 1500 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
