Military Engineer Services-MES has published Gek-11/2021-22 Repair And Maint Of Water Supply Machinery And Connected Items At Rcc And South Spring Water Supply Installation At Kasauli. Submission Date for this Tender is 09-06-2021. Springs Tenders in KASAULI Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-May-2021 | AMMENDEMENTS TO TENDER DOCUMENTS IN CLASS AND CATEGORY | Other | 02-06-2021 |
| 2 | 27-May-2021 | AMENDMENTS TO TENDER DOCUMENT DUE TO ADMINISTRATIVE REASONS | Other | 02-06-2021 |
| 3 | 27-May-2021 | AMENDMENTS TO TENDER DOCUMENT DUE TO ADMINISTRATIVE REASONS | Other | 02-06-2021 |
| 4 | 27-May-2021 | AMENDMENTS TO TENDER DOCUMENT DUE TO ADMINISTRATIVE REASONS | Other | 02-06-2021 |
| 5 | 02-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-06-2021 |
| Name of Work: REPAIR AND MAINT OF WATER SUPPLY MACHINERY AND CONNECTED ITEMS AT RCC & SOUTH SPRING WATER SUPPLY INSTALLATION AT KASAULI. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 0.01 | Schedule 'A' Section - I | |||
| 2 | 1 | Disconnecting /unscrewing coupling for 150 HP pump set and seperating pump and motor, disconnecting all water connections from pump including suction and discharge pipe line and taking out the pump from base frame, transporting to workshop to carry out the necessary repairs and took back after repairs , installing on existing location ,makng all the connections carefully, commissioning and testing at site to the entire satisfaction of the Engr-in-Charge. Note: All the Spares/ parts/ job repairs required to be replaced shall be measured and paid seperately as under:-\nNote : Attend the complaint with in 12 Hrs and after repairing the same to be fixed and testing within 48 Hrs. | 1 | Each Job | |
| 3 | 1.01 | Coupling Set suitable for 150 HP Pumpping set | 1 | Set | |
| 4 | 1.02 | Replacement of gun metal impeller | 6 | Each | |
| 5 | 1.03 | Replacement of gun metal Bush | 12 | Each | |
| 6 | 1.04 | Replacement of Gland Sleeve | 2 | Each | |
| 7 | 1.05 | Replacement of body Neck ring gun metal | 12 | Each | |
| 8 | 1.06 | Replacement of Pump shaft stainless steel | 1 | Each | |
| 9 | 1.07 | Counter Plate stainless steel | 1 | Each | |
| 10 | 1.08 | Diffuser Packing | 12 | Each | |
| 11 | 1.09 | Impeller brazing machining and reboring | 6 | Each | |
| 12 | 1.1 | New Key way of impeller disc | 6 | Each | |
| 13 | 1.11 | Diffuser outer dia brazing and machining | 6 | Each | |
| 14 | 1.12 | Impellers outer dia brazing and machining | 6 | Each | |
| 15 | 2 | Taking out old unserviceable with replacement of ball bearing 6314, complete all as speciified and as directed by Engineer-in-charge. | 2 | Each | |
| 16 | 3 | Taking out old unserviceable with replacement of ball bearing 6315, complete all as speciified and as directed by Engineer-in-charge. | 2 | Each | |
| 17 | 4 | Taking out old unserviceable with replacement of roller bearing NU 207, complete all as speciified and as directed by Engineer-in-charge. | 2 | Each | |
| 18 | 5 | Taking out old unserviceable with replacement of roller bearing NU 307, complete all as speciified and as directed by Engineer-in-charge. | 2 | Each | |
| 19 | 6 | Taking out old unsv and S&F Water meter 150 mm nominal bore conforming to IS:2373-1981 having CI casing bronze body and SS/Alloy/Bronze gear having dial duly marked with litres or kilolitres in boldface, thread/flanged end type , fixed as in repair complete all as specified and as directed . | 2 | Each | |
| 20 | 7 | Taking out old unsv and S&F Water meter 50 mm nominal bore conforming to IS:2373-1981 having CI casing bronze body and SS/Alloy/Bronze gear having dial duly marked with litres or kilolitres in boldface, thread/flanged end type , fixed as in repair complete all as specified and as directed . | 1 | Each | |
| 21 | 8 | Taking out complete pump & motor 150 HP from from foundation along with base frame including dismantling all water supply and electric connection from RCC water supply instn, carrying 15 kmtr distance to pump and motor 150 HP dismantling to old foundation up to old nut bolts base, supply cross arms brasing 60x60x6 mm (3 x 1.5) 22 Rm ISI Marked and fixing (welding) the old nuts. After welding the cross arms /channel filling the PCC (1:2:4) type B2 using 40 mm graded stone aggregate up to 30 cm bottom to cross arms bracing (3 x 1.5 x 0.30 mtr ) including necessary form work and provn of nut/studs of suitable size 08 nos and length including grouting in position making good disturbed surface for mortar work and fixing the old disconnected base frame fixed in the nut bolts all as specified and direcetd by Engr-in-charge. | 1 | Each \nJob | |
| 22 | 9 | Disconnecting existing electric motor and dismantling from foundation and transporting the same to the workshop for repairs and refixing the same on existing location after repair & making electric connection including testing and commissionig complete. including taking out burnt winding and rewinding the motor with super enamelled copper wires as per existing guage and size including super quality of varnish and insulating material as required for 150 HP electric motor complete all as speciified and as directed by Engineer-in-charge.\nNote : Attend the complint with in 12 Hrs and after repairing the same to be fixed and testing within 48 Hrs. | 1 | Each Job | |
| 23 | 10 | Taking out unserviceable/defective/damaged/blockage GI pipe ny bore steel water tubing,sorting out serviceable pipe fitting for reuse and cleaning the pipe including fitting and removing away all unserviceable pipe from site, complete all as specified and as directed. | 30 | RM | |
| 24 | 11 | S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 20 mm bore with and including all fittings such as bends , elbows,tees, short length , socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and as directed. \n | 30 | RM | |
| 25 | 12 | Two coats of synthetic enameled paint (tint of paint as directed) over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces on delivery/section line MS/seamless pipe-15 Rm (including fittings), Havy duty gate valve-03 Nos NRV-03 Nos and pump 150/220 HP -03 Nos and motor 150/220 Hp -03 Nos etc. Back side wall of pump and motor 1.5 mtr hight (bottom level) square shape of 50 x 50 cm using black paint background and writting names/letters using white paint (Eqpt/Item, Specification and Capacity, Year of Istallation, Manufacturer amd Make, SM MES No, Serviceability) Complete all as specified and direcetd by Engr-in-Charge. | 3 | Each\n Job | |
| 26 | 13 | Taking out old unsv and S&F Bronze gate valve for 20 mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778: 1984, fixed as in repair complete all as specified and directed. | 8 | Each | |
| 27 | 14 | All as per serial item No. 12 here-in-before but of size 25mm bore -ditto-. | 10 | Each | |
| 28 | 15 | Supply of calcium hypo chloride, 65%-70% chlorine content, high strength granular disinfectant for treatment of drinking water complete all as specified and qty as per requirement and as directed by Engr-in-Charge. Make: Puri chlor brand of M/S Sree Rayalaseema Hi-strength Hypo Ltd. | 315 | Kg | |
| 29 | 16 | Dismantling of defective/unsv 150 mm nominal size pipe line and taking out from trenches with necessary excavation work and carrying out the reapir work at site or local wk shop for welding work to repair defective portion of pipe line and providing leak proof jointing material to leaked/pierced portion and took back after repair to work site complete and relaying of repaired pipe line 150mm bore in trenches and jointing the same in trenches complete with new gasket, nut bolts and other jointing material including testing/commissioning the pipe line on full pressure complete all as specified and directed by Engr-in-charge. NOTE :- (i) MS flanges & flanged joints shall measured and paid for separatly under relevant items.(ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed by Engineer-in-charge. | 10 | Each Job | |
| 30 | 17 | Supplying, fixing and testing of high pressure, heavy duty cast steel gate valve, nominal size DN-150 mm, conforming to API 600, Class 600, suitable to hydrostatic test pressure for body 156 kg/sq cm & for seat 115 kg/sq cm, both ends flanged in existing line, after removal of old unserviceable gate valve without damaging to existing pipe line complete all as specified and directed by Engr-in-charge. Note : Suitable size MS flanges for existing pipe line, Joints and jointing materials shall be included under this item. | 2 | Each | |
| 31 | 18 | M& L for removing existing sludge from reservior & depositing the sludge upto 100 m distance & cleaning , scrapping down deposit from floor & wall , washing the walls/floor with bleaching powder in the resrvior of following capacity, including writing work with synthetic enamel paint on the wall (capacity , date of cleaning, date of next claening , location etc.) complete all as specified & directed. | |||
| 32 | 18.01 | 30 Lakhs gallon at RCC water supply installtion | 1 | Each Job | |
| 33 | 18.02 | 24 Lakhs gallon at RCC water supply installtion | 1 | Each Job | |
| 34 | 18.03 | 10 Lakhs gallon at RCC/South spring water supply installtion | 3 | Each Job | |
| 35 | 18.04 | 0.63 Lakhs gallon at South spring water supply installtion | 1 | Each Job | |
| 36 | 18.05 | 7 Lakhs gallon at MES Club water distribution tank | 1 | Each Job | |
| 37 | 18.06 | 3.5 Lakhs gallon at MES Club water distribution tank | 2 | Each Job | |
| 38 | 18.07 | 0.30 Lakhs gallon at P2 & P3 water supply installtion | 2 | Each Job | |
| 39 | 18.08 | 5 Lakhs gallon at High level distribution tank | 1 | Each Job | |
| 40 | 19 | Amount of credit of Rs. 18610.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
