Military Engineer Services-MES has published Geaf-24/2021-22 Certain Repairs To Dg Sets At Various Power Houses And Connected E/M Works At Af Station Leh. Submission Date for this Tender is 11-06-2021. Diesel Generators Tenders in GE AF LEH Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-May-2021 | Revised BOQ | BOQ | 04-06-2021 |
| 2 | 04-Jun-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-06-2021 |
| Name of Work : CERTAIN REPAIRS TO DG SETS AT VARIOUS POWER HOUSES AND CONNECTED E/M WORKS AT AF STATION LEH | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling/opening of upper portion of diesel engine 125 KVA, Make Kirloskar, water cooled, turbo charged 1500 RPM for repair of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete all as specified including replacement of unserviceable parts and testing of the DG Set after completion of job as per satisfaction of Engr-in-Charge.\nNote: This item includes only dismantling of engine and the cost of labour for repair and repalacement shall be paid sepearately under the reapective item below. | 1 | Each Job | |
| 2 | 1.01 | Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve seats/ guide, collect valve, valve spring etc. | 1 | Each Job | |
| 3 | 1.02 | Labour for Repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge. | 1 | Each Job | |
| 4 | 1.03 | Labour for Grinding & Polishing of crank shaft and making it smooth for new heigher size of bearing and all as specifed and directed. | 1 | Each Job | |
| 5 | 1.04 | Labour for Repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, carrel plunges, injectors etc. | 1 | Each Job | |
| 6 | 1.05 | Labour for assembling of engine after replacement of UNSV/defective parts with new as listed below supply only and job work listed against Srl item No 1 \nNote: All new spare parts and job work shall be measured and paid seperately under respective items. | 1 | Each Job | |
| 7 | 1.06 | Cylinder liner with sealing ring | 6 | Each | |
| 8 | 1.07 | Piston assembly with pin complete | 6 | Each | |
| 9 | 1.08 | Piston ring set | 6 | Each Set | |
| 10 | 1.09 | Cylinder Head Gasket (Front) | 1 | Each Set | |
| 11 | 1.1 | Cylinder Head Gasket (Rear) | 1 | Each Set | |
| 12 | 1.11 | C. R. bearing | 6 | Each | |
| 13 | 1.12 | C. R. Bushing | 6 | Each | |
| 14 | 1.13 | Hose set | 1 | Each | |
| 15 | 1.14 | Oil seal | 1 | Each | |
| 16 | 1.15 | Valve giude | 6 | Each | |
| 17 | 1.16 | Valve Seat | 6 | Each | |
| 18 | 1.17 | O-Ring | 6 | Each | |
| 19 | 1.18 | Intake Valve | 6 | Each | |
| 20 | 1.19 | Exhaust Valve | 6 | Each | |
| 21 | 1.2 | Valve spring (inner) | 6 | Each | |
| 22 | 1.21 | Valve spring (outer) | 6 | Each | |
| 23 | 1.22 | Valve Seat Spring | 6 | Each | |
| 24 | 1.23 | Cam bush | 7 | Each | |
| 25 | 1.24 | Main bearing | 7 | Each | |
| 26 | 1.25 | Oil Pan Gasket | 1 | Each | |
| 27 | 1.26 | Turbocharger assy | 1 | Each | |
| 28 | 1.27 | Turbochrger gasket | 1 | Each | |
| 29 | 2 | Dismantling/opening of upper portion of diesel engine 125 KVA, Make Greaves, water cooled, turbo charged 1500 RPM for repair of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete all as specified including replacement of unserviceable parts and testing of the DG Set after completion of job as per satisfaction of Engr-in-Charge.\nNote: This item includes only dismantling of engine and the cost of labour for repair and repalacement shall be paid sepearately under the reapective item below. | 2 | Each Job | |
| 30 | 2.01 | Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve seats/ guide, collect valve, valve spring etc. | 2 | Each Job | |
| 31 | 2.02 | Labour for Repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge. | 2 | Each | |
| 32 | 2.03 | Labour for Grinding & Polishing of crank shaft and making it smooth for new heigher size of bearing and all as specifed and directed. | 2 | Each Job | |
| 33 | 2.04 | Labour for Repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, carrel plunges, injectors etc. | 2 | Each Job | |
| 34 | 2.05 | Labour for assembling of engine after replacement of UNSV/defective parts with new as listed below supply only and job work listed against Srl item No 2.\nNote: All new spare parts and job work shall be measured and paid seperately under respective items. | 2 | Each Job | |
| 35 | 2.06 | Cylinder liner with sealing ring | 8 | Each | |
| 36 | 2.07 | Piston assy with piston pin complete | 8 | Each | |
| 37 | 2.08 | Piston ring set | 8 | Each | |
| 38 | 2.09 | C. R. bearing | 8 | Each | |
| 39 | 2.1 | C. R. Bushing | 8 | Each | |
| 40 | 2.11 | Valve giude | 8 | Each | |
| 41 | 2.12 | Valve insert intake/exhaust | 16 | Each | |
| 42 | 2.13 | Intake Valve | 8 | Each | |
| 43 | 2.14 | Exhaust Valve | 8 | Each | |
| 44 | 2.15 | Valve spring | 16 | Each | |
| 45 | 2.16 | Valve Seat Spring | 8 | Each | |
| 46 | 2.17 | Piston cooling nozzle | 8 | Each | |
| 47 | 2.18 | Lub oil pump | 2 | Each | |
| 48 | 2.19 | Cam bush | 14 | Each | |
| 49 | 2.2 | Main bearings | 14 | Each | |
| 50 | 2.21 | Gasket set upper | 2 | Each | |
| 51 | 2.22 | Gasket set lower | 2 | Each | |
| 52 | 2.23 | Water pump assy | 2 | Each | |
| 53 | 2.24 | Turbocharger assy | 2 | Each | |
| 54 | 3 | Dismantling/opening of upper portion of diesel engine 160 KVA, Make Greaves, water cooled, turbo charged 1500 RPM for repair of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete all as specified including replacement of unserviceable parts and testing of the DG Set after completion of job as per satisfaction of Engr-in-Charge.\nNote: This item includes only dismantling of engine and the cost of labour for repair and repalacement shall be paid sepearately under the reapective item below. | 1 | Each Job | |
| 55 | 3.01 | Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve seats/ guide, collect valve, valve spring etc. | 1 | Each Job | |
| 56 | 3.02 | Labour for Repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge. | 1 | Each Job | |
| 57 | 3.03 | Labour for Grinding & Polishing of crank shaft and making it smooth for new heigher size of bearing and all as specifed and directed. | 1 | Each Job | |
| 58 | 3.04 | Labour for Repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, carrel plunges, injectors etc. | 1 | Each Job | |
| 59 | 3.05 | Labour for assembling of engine after replacement of UNSV/defective parts with new as listed below supply only and job work listed against Srl item No 3.\nNote: All new spare parts and job work shall be measured and paid seperately under respective items. | 1 | Each Job | |
| 60 | 3.06 | Piston Assy | 6 | Each | |
| 61 | 3.07 | Piston Ring Set | 6 | Each | |
| 62 | 3.08 | Liner | 6 | Each | |
| 63 | 3.09 | Main Bearing | 14 | Each | |
| 64 | 3.1 | Con Rod Bearing | 6 | Each | |
| 65 | 3.11 | Upper Engine Gasket | 1 | Each | |
| 66 | 3.12 | O-Ring | 6 | Each | |
| 67 | 3.13 | Set Of Complete Hose | 1 | Each | |
| 68 | 3.14 | Set Of Injector Pipe | 1 | Each | |
| 69 | 3.15 | Head Gasket | 6 | Each | |
| 70 | 3.16 | Set Of Fuel Flexible Pipe | 1 | Each | |
| 71 | 3.17 | Water Pump Assy | 1 | Each | |
| 72 | 3.18 | Inlet Valve | 6 | Each | |
| 73 | 3.19 | Exhast Valve | 6 | Each | |
| 74 | 3.2 | Valve Seat Inlet | 6 | Each | |
| 75 | 3.21 | Valve Seat Eaxhust | 6 | Each | |
| 76 | 3.22 | Injector Sleeve | 6 | Each | |
| 77 | 3.23 | Valve Collet | 12 | Each | |
| 78 | 3.24 | Con Rod Bush | 6 | Each | |
| 79 | 3.25 | Valve Guide | 12 | Each | |
| 80 | 3.26 | Tappet | 6 | Each | |
| 81 | 3.27 | Push Rod | 6 | Each | |
| 82 | 3.28 | Turbocharger assy | 1 | Each | |
| 83 | 4 | Dismantling/opening of upper portion of diesel engine 200 KVA, Make Greaves, water cooled, turbo charged 1500 RPM for repair of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete all as specified including replacement of unserviceable parts and testing of the DG Set after completion of job as per satisfaction of Engr-in-Charge.\nNote: This item includes only dismantling of engine and the cost of labour for repair and repalacement shall be paid sepearately under the reapective item below. | 1 | Each Job | |
| 84 | 4.01 | Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve seats/ guide, collect valve, valve spring etc. (Spares as required/listed in this item shall be paid under item No 02 here-in-after). | 1 | Each Job | |
| 85 | 4.02 | Labour for Repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge. | 1 | Each | |
| 86 | 4.03 | Labour for Grinding & Polishing of crank shaft and making it smooth for new heigher size of bearing and all as specifed and directed. | 1 | Each Job | |
| 87 | 4.04 | Labour for Repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, carrel plunges, injectors etc. | 1 | Each Job | |
| 88 | 4.05 | Labour for assembling of engine after replacement of UNSV/defective parts with new as listed below supply only and job work listed against Srl item No 5. \nNote: All new spare parts and job work shall be measured and paid seperately under respective items. | 1 | Each Job | |
| 89 | 4.06 | Piston Assy | 6 | Each | |
| 90 | 4.07 | Piston Ring Set | 6 | Each | |
| 91 | 4.08 | Liner | 6 | Each | |
| 92 | 4.09 | Main Bearing | 14 | Each | |
| 93 | 4.1 | Con Rod Bearing | 6 | Each | |
| 94 | 4.11 | Upper Engine Gasket | 1 | Each | |
| 95 | 4.12 | O-Ring | 6 | Each | |
| 96 | 4.13 | Set Of Complete Hose | 1 | Each | |
| 97 | 4.14 | Set Of Injector Pipe | 1 | Each | |
| 98 | 4.15 | Head Gasket | 6 | Each | |
| 99 | 4.16 | Set Of Fuel Flexible Pipe | 1 | Each | |
| 100 | 4.17 | Water pump assy | 1 | Each | |
| 101 | 4.18 | Inlet Valve | 6 | Each | |
| 102 | 4.19 | Exhaust Valve | 6 | Each | |
| 103 | 4.2 | Valve Seat Inlet | 6 | Each | |
| 104 | 4.21 | Valve Seat Eaxhust | 6 | Each | |
| 105 | 4.22 | Injector Sleeve | 6 | Each | |
| 106 | 4.23 | Valve Collet | 12 | Each | |
| 107 | 4.24 | Con Rod Bush | 6 | Each | |
| 108 | 4.25 | Valve Guide | 12 | Each | |
| 109 | 4.26 | Tappet | 6 | Each | |
| 110 | 4.27 | Push Rod | 6 | Each | |
| 111 | 4.28 | Turbocharger assy | 1 | Each | |
| 112 | 5 | Note : Schedule of credit for Rs. 81,910.00 (Rupees Eighty One Thousand Nine Hundred Ten Only) to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documents |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
