Annual Maintenance And Repair Works Of Bijlighar Kesco Kanpur, BIJLIGHAR KESCo KANPUR-Uttar Pradesh

Annual Maintenance And Repair Works Of Bijlighar Kesco Kanpur-2 Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01) 3 Clearing jungle including uprooting of rank vegetations,grass, bush, wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. (CSI No. 4.08) 4 Local Fine sand of 1.25 F.M. filling in plinth including supply of necessary quantity of sand from a river/canal nearest to the site of work including watering, ramming and dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. (KDA apprd.) 5 Concrete with 4 cm gauge brick ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundation and under floors including supply of all materials, labour and T & P etc. required for proper completion of the work. (PWD 5.01/273) 6 Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work. (CSI No. 5.06) 7 First class brick (class-150) work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01) 8 First class brick (class-150) work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in super structure of one brick thick wall including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01+6.08) 9 First class brick (class-150) work in 1:4 cement and coarse sand (F.M.1.8 to 2.5) mortar in super structure of 1/2 brick thick wall including supply of all materials, labour & T&P etc. required for proper completion of work (CSI No. 6.03+6.09) 10 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand(1:4),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09) 11 Add for extra labour to all items of plaster if done in ceiling. (CSI No. 11.10) 12 Dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the Engineer-Incharge within a distance of 60 metres. (CSI No. 15.03) 13 Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres. (CSI No. 15.01) 14 Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres. (CSI No. 15.05) 15 Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) 16 Supply of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but execluding U.P.T.T. which shall be paid extra as per rules. (CSI No.12.23) 17 Mild steel or Iron work of small sizes and sections such as Holding down bolts, Holdfasts tie rods, gratings etc. (When not included in an overall rates) wrought to required shape form including supply of steel bolts, nuts, wastage etc. and their fixing, required for proper completion of the work including cost of steel (which shall be arranged by the contractor). (CSI No. 9.00) 18 TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03) 19 Repairs to plaster of thickness (With cement mortar 1:4 (1cement: 4 coarse sand) 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge (CPWD 14.1.2) 20 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work. (cement consumtion 0.044 bag/Sq.m.) (CSI No. 11.20) 21 Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) 22 Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21) 23 One priming coat and one coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.08) 24 Same as in item (13.08) but for every coat after the first coat. (CSI No. 13.09) 25 As above in item no. (13.08) but for every coat on previously old oil bound distemper surface. (CSI No. 13.10) 26 Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22) 27 Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23) 28 Same as in item 13.22 but for each coat of APEX or equivalent brand weather coat paint .on previously treated surface. (CSI No. 13.24) 29 Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25) 30 Same as above in item no. 13.25 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint. (CSI No. 13.26) 31 Same as above in item no. 13.25 but one coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint on previously painted surface. (CSI No. 13.27) 32 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.04) 33 Supply and Laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.11) 34 Supply and Laying 6 mm thick glazed tiles of size 200*300 or 450*300 mm in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.12) 35 Providing and laying floor of 10 mm thick vitrified tiles(Premium Quality) in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for pr (CSI 12.18A) 36 Providing and laying of 20 mm thick granite ( black/ brown) in flooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. (CSI No.12.20A) 37 Extra for making edge moulding to 20mm thick Granite stone counters, vanities etc in proper shape and size as per direction of E/I . Including machine policing to give high gloss finish complete.(CSI No.12.20B) 38 Providing and fixing of 110 mm dia P.V.C. pressure pipe (6 Kg/sq.cm.) for water supply mains with specials such as tee, bend, socket, elbow etc. including cutting of pipe wherever necessary and including excavation of trenches (450x600) mm for laying the pipe line and including its back filling after testing the pipe line including watering, ramming etc. complete including disposal of surplus earth from the site up to 100m as per direction of E/I including supply of all material, labour, T&P etc. required for proper completion of work. (CSI No. 24.47- SOR 2017) 39 S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of shishum wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour and T&P etc. required for proper complete. (CSI No. 8.44) 40 Renewing panes of 4.8 t0 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(a) glass of 5 mm thick. (CSI No. 20.04a) 41 Indian Shishum wood wrought framed and fixed including simple, mouldings straight work as in Chaukhats including supply of all materials, labour and T&P etc.required for proper completion of the work . (CSI No. 8.02) 42 Supply and fixing of 3.5 cm. thick Shisham wood fully panelled door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.). (CSI No. 8.23) 43 Providing and fixing 19.00 mm thick ply board/block board for wardrobe shutter etc. of Reliance or Scorpio or equivalent make including teak wood beading around the shutter and including fixing and adjustment of hinges, bolts handle and other fittings but excluidng their supply and including cost of all material labour, T&P etc. required for the proper completion of the work. (Old CSI 8.25) 44 P/F of 6.0mm thick Water Proof Commercial quality plywood in partition work to make 5x4mm size groove at specified intervals. Ply shall be fixed by means of glue and headless nailsat 100mm c/c complete. Cost including all labour, material,T&P required for proper completion of work. (Old CSI 8.30) 45 Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01a) 46 Same as in item no. (26.01 above but for 20 mm dia. (CSI No. 26.01(b)) 47 Same as in item no. (26.01 above but for 25 mm dia. (CSI No. 26.01(c)) 48 Same as in item no. (26.01 above but for 32 mm dia. (CSI No. 26.01(d)) 49 Supply & fixing of CPVC Pipe 20mm (Chlorinated polyvinyl chloride) having thermal stability for hot and cold water supply including all CPVC plan, bras thread fitting and required labour etc. complete in all respect. (DSR/PWD 18.8.2) 50 Supply & fixing of CPVC Pipe 15mm (Chlorinated polyvinyl chloride) having thermal stability for hot and cold water supply including all CPVC plan, bras thread fitting and required labour etc. complete in all respect. (DSR/PWD 19/18.8.1) 51 Providing and fixing full way 15mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04a) 52 Providing and fixing full way 20mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04b) 53 Providing and fixing full way 25mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04c) 54 Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completioon of work. (CSI No. 26.12) 55 Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06) 56 Supply and fixing PVC Nahani Trap of heavy quality over minimum 75 mm thick cement concrete in proportion of 1:2:4 including cost of cement concrete, all materials, labour, T&P etc. required for proper completion of work. (Old CSI 25.27) 57 Providing and fixing 100mm. dia C.P. grating over Nahani Trap or drain holes including cost of all materials, labour and T & P etc. required for proper completion of the work. (Old CSI 25.24) 58 P/F 32 mm dia P.V.C. waste pipe. (CSI No. 27.14) 59 Providing and fixing 10 littres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) 60 roviding and fixing PLASTIC SEAT COVER COMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKED including supply of all materials,labour and T&P etc.complete. (CSI No. 27.04) 61 Providing and fixing 100 mm dia PVC P or S trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24) 62 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete (CPWD 17.33) 63 Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09) 64 Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.13) 65 Providing and fixing of 15 mm dia C.P.Brass Angle Valve of heavy quality L&K or equiv. make including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 26.16 i) 66 Providng and fixing 15 mm dia C.P. Brass stop cock of L & K or equivalent make including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No 26.16d) 67 Providing and fixing first quality white glazed Orissa pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out P trap including supply of all materials,labour and T&P etc.complete. (CSI No. 27.01) 68 Providing and fixing of Ist quality white glazed earthen ware wash hand basin ISI marked size 510mm x 400mm (Hindware or equivalent make) with R.S. or C.I. brackets, C.P. Brass pillar cock 15mm dia (weight not less than 400 gms) ISI marked, 32mm dia C.P. brass chain with rubber plug, 32mm dia C.P. Brass waste standard pattern with check nut, P.V.C. connection 15 mm dia including cutting and making good the walls and floor including cost of all required materials, labour and T& P etc. required for proper completion of work ( Fittings to be used should be of superior quality as per approved sample). (Old CSI 25.08) 69 Providing and fixing first quality white glazed European pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out P trap including supply of all materials,labour and T&P etc.complete. (CSI No. 27.02) 70 Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.15) 71 Thorough cleaning of PVC TANK with bleaching powder and rubbing inside surface of OHT with jute and wire brush including cleaning and washing the surface with water including operation of tubewell and valves if required as per direction of E/I including cost of all materials, labour and T&P etc. required for completion of wrok. (OldCSI 22.38a) 72 Taking out unwanted weeds/trees from the wall/roof of residence and disposal the same outside the corporation area. (Old CSI 22.23) 73 Supply and fixing of chromium polished iron fitting with screws for doors and windows etc. A to L (Old CSI 8.17 A to L) 74 L-Drop 16 mm dia 12 long 75 L-Drop 16 mm dia 10 long 76 L-Drop 12mm dia 8 long 77 Tower bolt 10 long 78 Tower bolt 8 long 79 Tower bolt 6 long 80 Handle 6 long 81 Handle 4 long 82 M.S Hinges 5 long 83 M.S Hinges 4 long 84 M.S Hinges 3 long 85 Stopper with rubber pad 86 Plastic/rubber cleat 87 S/F of 25 mm dia decorative curtain rod with decorative end caps, matching curtain rings, including fixing with necessary clamps, PVC gully, steel screws etc. complete. (Old CSI 8.19) 88 Supply & fixing fresh air fan of 200mm of Crompton or equivalent make including labour & TP etc. (NSI) 89 Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. (CSI No. 8.60) 90 Cleaning and sweeping of roof of residence as and when required including uprooting of rank vegetation and disposal of the garbage upto 50 M.(CSI No. 22.20) 91 Attending to petty maintenance service like plumbing service, welder service, mason service and carpenter service required as below. 92 (b) Job attending by one no. Plumber/welder/mason/carpenter with two no. helper per hour or part of an hour. 93 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge (CPWD 17.16a) 94 Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.12) 95 Cleaning of existing pipe line of different dia. ranging from 4 to 2 dia. including digging trenches and refilling, opening of pipes, cleaning of pipes, cutting, threading, if required fixing and including making good the road, wall etc as directed by the engineer I/C.(CSI No. 20.26a) 96 Cleaning of existing water pipe line of different dia up to 2 dia including digging trenches and refilling,opening and cleaning of pipes,cutting,threading,if required fixing and including making good the road and wall etc. as directed by the Engineer in charge.(CSI No. 20.26b) 97 Cleaning of R.C.C. over head tank up to capacity of one lac. Liters and chlorinating with bleaching power mixed to water as per direction of Engineer - in - charge complete.(CSI No. 20.27) 98 Supply and mixing bleaching powder in over head tank as required or as directed by Engineer - in - charge.(CSI No. 20.29) 99 Providing and fixing 12 mm thick shuttering ply by replacing of panels including detatching the shutters, opening out and seperating the frame members and panels and including reassembling the shutter in part and again refixing the shutter including cost of all material, labour and T&P etc. required for proper completion of work. (Old CSI 22.09) 100 Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work.(CSI No. 22.14) 101 Providing hard rubber beading at bottom of door covered with aluminium strips for restoration of air conditioning and prolection from rats etc. as per direction of Engineer-in-charge including cost of materials,labour, T&P etc. required for proper completion of the work. (Old CSI 22.108) 102 Opening of Aluminium door shutter and refixing the same after replacement of new rubber beading and screws complete Excluding cost of Al. pipe and Glass but including cost of Rubber beading and Screw. Cost including all labour, material and T&P required for proper completion of work. (Old CSI 22.116) 103 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR 12.5) 104 Dismantling corrugated iron roofs walls or partition including purlins battens and vertical support and including stacking of materials as directed by the Engineerin - charge with a distance of 60 metres. (200 feet). (PWD 17.11) 105 Providing and fixing mineral Fibre Board modular False Ceiling in USG or Armstrong or equivalent make as approved by Architect in regular edge Mineral textured tiles with approved surface pattern of size 600mmx600mm having Noise reduction Co-efficient 0.5-.06 , light reflaction over 75% Relative Humidity 95% , Suspension system of true lock exposed grid system with 15mm wide flanges of white color , fixed to the structural soffit by Butterfly clip hangers, suspenstion wires & anchor fastener as per the manufacturers specification. Suspension wires to be provided at every 600mm c/c with two nos of ties on each anchor fastener , perimeter trim of Truelock wall angle in white color secured to wall at 450mm maximum centre. The work to be completed as per direction E/I. (Old CSI 8.35) 106 Removing and refixing galvanized iron corrugated or A.C. sheet roofing in position including cutting of old rusted bolts, if required, and including supply of bolts, nuts and hooks & J/U washer etc. required for proper completion of work. (Old CSI 22.14) 107 Cleaning white glazed Tiles with spirit and caustic soda including supply of all materials, labour and T&P etc. required for proper completion of the work. (Old agr. rate based on C.S.I. No. 20.09/ Sch rate 27.71) 108 Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in- Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. (Sch. rate 27.91/ 2014/NSI) 109 Providing and fixing false ceiling with 12mm thick plain/semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming IS:3087 finished with a coat of aluminium primer on both sides & edges and tow coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodized aluminium (with 15 micron anodic coating) T-sections 35X15X1.5mm size main runners and cross runners 23.5X19X1.5mm fixed to main runners placed 600mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6mm diameter M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600X1200mm center to center including fixing to the frame with C.P. brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately) (Revsed rate 27.92/2014/OLD C.S.I. No. 16.03) n. 110 P/F fully Anodized aluminium fixed glazing with HINDALCO or equivalent extruded standard sections14gauge (2.41mm thick) of various cross sections and joints mitred and jointed as shown in drawing including providing & fixing 5.5 mm thick toughened glass with Neoprene beading & aluminium glazing clips all around. The minimum thickness of anodizing on all aluminium sections should be 20 microns with a (+) 2 microns tolerance . The rate should include the cost of fixing the aluminum frame on Teak wood frame or finished wall (RB/RCC/Masonry) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c/c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of Teak frame but including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.52) n. 111 Same as above item No. 8.52 but for openable window portion as shown in drawings, including cost of Aluminium hinges and all other fittings like concealed tower bolts handles etc of approved quality and including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.53) 112 shown in drawings including cost of hinges and Aluminium fittings like tower bolts, handles, stoppers, push plates, brass body with brass component 6 levers cocealed lock etc of heavy & approved quality and including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.54) 113 S/Fixing of double action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge. including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.55) 114 Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P. (CSI No. 8.63) 115 Supply and fixing 24 B.W.G , G.C. Iron Sheet roofing .fixed in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. (CSI No. 10.01) 116 As in item 10.01 but 6 mm thick grey corrugated asbestos sheet. (CSI No. 10.03) 117 Spreading over leaky roofs with bitumen paints at 0.45 Kg per sq.m. including sweeping, cleaning the roof with brushes, heating of the paints upto the required temperature,pouring it on the surface, spreading of necessary quantity of approved coarse sand 1 cft. per 100 sft. and including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.05) 118 Supply and laying one layer of tar felt or any other equivalent approved material at the junction of wall & roof or at any place as per direction of the Engineer-Incharge including necessary overlap, applying a coat of approved mastic paint below the Tar felt & including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.06) 119 S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15) 120 Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint Luxol or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01) 121 As in item 13.01 above but for every coat after first coat. (CSI No. 13.02) 122 As in item 13.01 above but for every coat on previously painted old wood or iron work including its sand papering,rubbing and cleaning as required, for proper completion of work. (CSI No. 13.03) 123 Supply and fixing 35mm thick factory made panel single leaf, hot pressed, phenol Formaldehyde resin bonded, boiling water resistant, commercial quality Sitapur ply wood or other ISI Marked Factory made flush door shutters conforming to IS: 2202 Part-1 ( 1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs and/or other fittings approved by Engineer-in-charge but excluding their ( fittings) supply but including painting two coats of black Japan on iron fittings if necessary.(CSI No. 8.24- SOR 2017) (CSI No. 29.05d) 124 Making expansion joints with 24 gauge Aluminium sheet &8 inch wide tarfelt fixed with tarmastic in roof or floors fitting joints with approved bitumen as per direction of Engg.-in-charge incl. supply of all material , labour & T&P etc. for proper completion of work.(CSI No. 10.14- SOR 2017) (CSI No. 29.29) 125 Flooring with P.V.C. tiles 1.5 mm. thick including cost of all materials,labour and T&P etc. required for proper completion of the work. (Old C.S.I No. 12.31) 126 Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made). (CSI No. 20.16)

INR 1180 /-

INR 6500.0 /-

Refer document

Name of Work: <ANNUAL M&R WORKS OF BIJLIGHAR, KESCo, KANPUR.>
	Sl. No.	Item Description		Quantity	Units
1	1	Civil work:
2	1.01	Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01)	item1	5	M3
3	1.02	Clearing jungle including uprooting of rank vegetations,grass, bush, wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. (CSI No. 4.08)	item2	250	M2
4	1.03	Local Fine sand of 1.25 F.M. filling in plinth including supply of necessary quantity of sand from a river/canal nearest to the site of work including watering, ramming and dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. (KDA apprd.)	item3	2	M3
5	1.04	Concrete with 4 cm gauge brick ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundation and under floors including supply of all materials, labour and T & P etc. required for proper completion of the work. (PWD 5.01/273)	item4	2	M3
6	1.05	Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 4:2:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work. (CSI No. 5.06)	item5	1	M3
7	1.06	First class brick (class-150) work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01)	item6	1	M3
8	1.07	First class brick (class-150) work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in super structure of one brick thick wall including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01+6.08)	item7	1	M3
9	1.08	First class brick (class-150) work in 1:4 cement and coarse sand (F.M.1.8 to 2.5) mortar in super structure of 1/2 brick thick wall including supply of all materials, labour & T&P etc. required for proper completion of work (CSI No. 6.03+6.09)	item8	1	M3
10	1.09	12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand(1:4),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09)	item9	40	M2
11	1.1	Add for extra labour to all items of plaster if done in ceiling. (CSI No. 11.10)	item10	30	M2
12	1.11	Dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the Engineer-Incharge within a distance of 60 metres. (CSI No. 15.03)	item11	0.5	M3
13	1.12	Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres. (CSI No. 15.01)	item12	1	M3
14	1.13	Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres. (CSI No. 15.05)	item13	5	M2
15	1.14	Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11)	item14	20	M2
16	1.15	Supply of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but execluding U.P.T.T. which shall be paid extra as per rules. (CSI No.12.23)	item15	5	M2
17	1.16	Mild steel or Iron work of small sizes and sections such as Holding down bolts, Holdfasts tie rods, gratings etc. (When not included in an overall rates) wrought to required shape form including supply of steel bolts, nuts, wastage etc. and their fixing, required for proper completion of the work including cost of steel (which shall be arranged by the contractor). (CSI No. 9.00)	item16	0.1	MT
18	1.17	TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03)	item17	0.1	MT
19	1.18	Repairs to plaster of thickness (With cement mortar 1:4 (1cement: 4 coarse sand) 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge (CPWD 14.1.2)	item18	55	M2
20	1.19	3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work. (cement consumtion 0.044 bag/Sq.m.) (CSI No. 11.20)	item19	48	M2
21	1.2	Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20)	item20	150	M2
22	1.21	Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21)	item21	200	M2
23	1.22	One priming coat and one coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.08)	item22	150	M2
24	1.23	Same as in item (13.08) but for every coat after the first coat. (CSI No. 13.09)	item23	450	M2
25	1.24	As above in item no. (13.08) but for every coat on previously old oil bound distemper surface. (CSI No. 13.10)	item24	450	M2
26	1.25	Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22)	item25	250	M2
27	1.26	Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23)	item26	550	M2
28	1.27	Same as in item 13.22 but for each coat of APEX or equivalent brand weather coat paint .on previously treated surface. (CSI No. 13.24)	item27	400	M2
29	1.28	Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25)	item28	50	M2
30	1.29	Same as above in item no. 13.25 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint. (CSI No. 13.26)	item29	120	M2
31	1.3	Same as above in item no. 13.25 but one coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint on previously painted surface. (CSI No. 13.27)	item30	120	M2
32	1.31	4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.04)	item31	25	M2
33	1.32	Supply and Laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.11)	item32	12	M2
34	1.33	Supply and Laying 6 mm thick glazed tiles of size 200*300 or 450*300 mm in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.12)	item33	10	M2
35	1.34	Providing and laying floor of 10 mm thick vitrified tiles(Premium Quality) in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for pr (CSI 12.18A)	item34	5	M2
36	1.35	Providing and laying of 20 mm thick granite ( black/ brown) in flooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. (CSI No.12.20A)	item35	4	M2
37	1.36	Extra for making edge moulding to 20mm thick Granite stone counters, vanities etc in proper shape and size as per direction of E/I . Including machine policing to give high gloss finish complete.(CSI No.12.20B)	item36	4	M2
38	1.37	Providing and fixing of 110 mm dia P.V.C. pressure pipe (6 Kg/sq.cm.) for water supply mains with specials such as tee, bend, socket, elbow etc. including cutting of pipe wherever necessary and including excavation of trenches (450x600) mm for laying the pipe line and including its back filling after testing the pipe line including watering, ramming etc. complete including disposal of surplus earth from the site up to 100m as per direction of E/I including supply of all material, labour, T&P etc. required for proper completion of work. (CSI No. 24.47- SOR 2017)	item37	10	RM
39	1.38	S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of shishum wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour and T&P etc. required for proper complete. (CSI No. 8.44)	item38	8	M2
40	1.39	Renewing panes of 4.8 t0 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(a) glass of 5 mm thick. (CSI No. 20.04a)	item39	5	M2
41	1.4	Indian Shishum wood wrought framed and fixed including simple, mouldings straight work as in Chaukhats including supply of all materials, labour and T&P etc.required for proper completion of the work . (CSI No. 8.02)	item40	0.2	M3
42	1.41	Supply and fixing of 3.5 cm. thick Shisham wood fully panelled door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.). (CSI No. 8.23)	item41	2	M2
43	1.42	Providing and fixing 19.00 mm thick ply board/block board for wardrobe shutter etc. of Reliance or Scorpio or equivalent make including teak wood beading around the shutter and including fixing and adjustment of hinges, bolts handle and other fittings but excluidng their supply and including cost of all material labour, T&P etc. required for the proper completion of the work. (Old CSI 8.25)	item42	5	M2
44	1.43	P/F of 6.0mm thick Water Proof Commercial quality plywood in partition work to make 5x4mm size groove at specified intervals. Ply shall be fixed by means of glue and headless nailsat 100mm c/c complete. Cost including all labour, material,T&P required for proper completion of work. (Old CSI 8.30)	item43	2	M2
45	1.44	Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01a)	item44	15	RM
46	1.45	Same as in item no. (26.01 above but for 20 mm dia. (CSI No. 26.01(b))	item45	30	RM
47	1.46	Same as in item no. (26.01 above but for 25 mm dia. (CSI No. 26.01(c))	item46	30	RM
48	1.47	Same as in item no. (26.01 above but for 32 mm dia. (CSI No. 26.01(d))	item47	30	RM
49	1.48	Supply & fixing of CPVC Pipe 20mm (Chlorinated polyvinyl chloride) having thermal stability for hot and cold water supply including all CPVC plan, bras thread fitting and required labour etc. complete in all respect. (DSR/PWD 18.8.2)	item48	30	RM
50	1.49	Supply & fixing of CPVC Pipe 15mm (Chlorinated polyvinyl chloride) having thermal stability for hot and cold water supply including all CPVC plan, bras thread fitting and required labour etc. complete in all respect. (DSR/PWD 19/18.8.1)	item49	30	RM
51	1.5	Providing and fixing full way 15mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04a)	item50	10	Each
52	1.51	Providing and fixing full way 20mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04b)	item51	3	Each
53	1.52	Providing and fixing full way 25mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04c)	item52	2	Each
54	1.53	Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completioon of work. (CSI No. 26.12)	item53	1000	No.
55	1.54	Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06)	item54	5	Each
56	1.55	Supply and fixing PVC Nahani Trap of heavy quality over minimum 75 mm thick cement concrete in proportion of 1:2:4 including cost of cement concrete, all materials, labour, T&P etc. required for proper completion of work. (Old CSI 25.27)	item55	5	Each
57	1.56	Providing and fixing 100mm. dia C.P. grating over Nahani Trap or drain holes including cost of all materials, labour and T & P etc. required for proper completion of the work. (Old CSI 25.24)	item56	5	Each
58	1.57	P/F 32 mm dia P.V.C. waste pipe. (CSI No. 27.14)	item57	5	Each
59	1.58	Providing and fixing 10 littres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12)	item58	3	Each
60	1.59	roviding and fixing PLASTIC SEAT COVER COMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKED including supply of all materials,labour and T&P etc.complete. (CSI No. 27.04)	item59	5	Each
61	1.6	Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24)	item60	3	Each
62	1.61	Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete (CPWD 17.33)	item61	5	Each
63	1.62	Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09)	item62	5	No.
64	1.63	Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.13)	item63	4	Each
65	1.64	Providing and fixing of 15 mm dia C.P.Brass Angle Valve of heavy quality L&K or equiv. make including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 26.16 i)	item64	4	Each
66	1.65	Providng and fixing 15 mm dia C.P. Brass stop cock of L & K or equivalent make including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No 26.16d)	item65	4	Each
67	1.66	Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trap including supply of all materials,labour and T&P etc.complete. (CSI No. 27.01)	item66	2	Each
68	1.67	Providing and fixing of Ist quality white glazed earthen ware wash hand basin ISI marked size 510mm x 400mm (Hindware or equivalent make) with R.S. or C.I. brackets, C.P. Brass pillar cock 15mm dia (weight not less than 400 gms) ISI marked, 32mm dia C.P. brass chain with rubber plug, 32mm dia C.P. Brass waste standard pattern with check nut, P.V.C. connection 15 mm dia including cutting and making good the walls and floor including cost of all required materials, labour and T& P etc. required for proper completion of work ( Fittings to be used should be of superior quality as per approved sample). (Old CSI 25.08)	item67	2	Each
69	1.68	Providing and fixing first quality white glazed "European" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trap including supply of all materials,labour and T&P etc.complete. (CSI No. 27.02)	item68	1	Each
70	1.69	Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.15)	item69	3	No.
71	1.7	Thorough cleaning of PVC TANK with bleaching powder and rubbing inside surface of OHT with jute and wire brush including cleaning and washing the surface with water including operation of tubewell and valves if required as per direction of E/I including cost of all materials, labour and T&P etc. required for completion of wrok. (OldCSI 22.38a)	item70	10	Each
72	1.71	Taking out unwanted weeds/trees from the wall/roof of residence and disposal the same outside the corporation area. (Old CSI 22.23)	item71	10	Each
73	1.72	Supply and fixing of chromium polished iron fitting with screws for doors and windows etc. A to L (Old CSI 8.17 A to L)	item72
74	1.73	L-Drop 16 mm dia 12" long	item73	5	Each
75	1.74	L-Drop 16 mm dia 10" long	item74	5	Each
76	1.75	L-Drop 12mm dia 8" long	item75	6	Each
77	1.76	Tower bolt 10" long	item76	16	Each
78	1.77	Tower bolt 8" long	item77	4	Each
79	1.78	Tower bolt 6" long	item78	14	Each
80	1.79	Handle 6" long	item79	5	Each
81	1.8	Handle 4" long	item80	6	Each
82	1.81	M.S Hinges 5" long	item81	6	Each
83	1.82	M.S Hinges 4" long	item82	6	Each
84	1.83	M.S Hinges 3" long	item83	6	Each
85	1.84	Stopper with rubber pad	item84	6	Each
86	1.85	Plastic/rubber cleat	item85	6	Each
87	1.86	S/F of 25 mm dia decorative curtain rod with decorative end caps, matching curtain rings, including fixing with necessary clamps, PVC gully, steel screws etc. complete. (Old CSI 8.19)	item86	5	RM
88	1.87	Supply & fixing fresh air fan of 200mm of Crompton or equivalent make including labour & TP etc. (NSI)	item87	2	Each
89	1.88	Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. (CSI No. 8.60)	item88	2	No.
90	1.89	Cleaning and sweeping of roof of residence as and when required including uprooting of rank vegetation and disposal of the garbage upto 50 M.(CSI No. 22.20)	item89	3000	Sqm
91	1.9	Attending to petty maintenance service like plumbing service, welder service, mason service and carpenter service required as below.	item90
92	1.91	(b) Job attending by one no. Plumber/welder/mason/carpenter with two no. helper per hour or part of an hour.	item91	50	Hour
93	1.92	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge (CPWD 17.16a)	item92	1	Each
94	1.93	Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.12)	item93	10	No.
95	1.94	Cleaning of existing pipe line of different dia. ranging from 4" to 2" dia. including digging trenches and refilling, opening of pipes, cleaning of pipes, cutting, threading, if required fixing and including making good the road, wall etc as directed by the engineer I/C.(CSI No. 20.26a)	item94	5	RM
96	1.95	Cleaning of existing water pipe line of different dia up to 2" dia including digging trenches and refilling,opening and cleaning of pipes,cutting,threading,if required fixing and including making good the road and wall etc. as directed by the Engineer in charge.(CSI No. 20.26b)	item95	5	RM
97	1.96	Cleaning of R.C.C. over head tank up to capacity of one lac. Liters and chlorinating with bleaching power mixed to water as per direction of Engineer - in - charge complete.(CSI No. 20.27)	item96	1	No.
98	1.97	Supply and mixing bleaching powder in over head tank as required or as directed by Engineer - in - charge.(CSI No. 20.29)	item97	20	Kg.
99	1.98	Providing and fixing 12 mm thick shuttering ply by replacing of panels including detatching the shutters, opening out and seperating the frame members and panels and including reassembling the shutter in part and again refixing the shutter including cost of all material, labour and T&P etc. required for proper completion of work. (Old CSI 22.09)	item98	5	M2
100	1.99	Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work.(CSI No. 22.14)	item99	20	No.
101	2	Providing hard rubber beading at bottom of door covered with aluminium strips for restoration of air conditioning and prolection from rats etc. as per direction of Engineer-in-charge including cost of materials,labour, T&P etc. required for proper completion of the work. (Old CSI 22.108)	item100	50	RM
102	2.01	Opening of Aluminium door shutter and refixing the same after replacement of new rubber beading and screws complete Excluding cost of Al. pipe and Glass but including cost of Rubber beading and Screw. Cost including all labour, material and T&P required for proper completion of work. (Old CSI 22.116)	item101	10	M2
103	2.02	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR 12.5)	item102	50	M2
104	2.03	Dismantling corrugated iron roofs walls or partition including purlins battens and vertical support and including stacking of materials as directed by the Engineerin - charge with a distance of 60 metres. (200 feet). (PWD 17.11)	item103	50	M2
105	2.04	Providing and fixing mineral Fibre Board modular False Ceiling in USG or Armstrong or equivalent make as approved by Architect in regular edge Mineral textured tiles with approved surface pattern of size 600mmx600mm having Noise reduction Co-efficient 0.5-.06 , light reflaction over 75% Relative Humidity 95% , Suspension system of true lock exposed grid system with 15mm wide flanges of white color , fixed to the structural soffit by Butterfly clip hangers, suspenstion wires & anchor fastener as per the manufacturer's specification. Suspension wires to be provided at every 600mm c/c with two nos of ties on each anchor fastener , perimeter trim of Truelock wall angle in white color secured to wall at 450mm maximum centre. The work to be completed as per direction E/I. (Old CSI 8.35)	item104	5	M2
106	2.05	Removing and refixing galvanized iron corrugated or A.C. sheet roofing in position including cutting of old rusted bolts, if required, and including supply of bolts, nuts and hooks & J/U washer etc. required for proper completion of work. (Old CSI 22.14)	item105	10	M2
107	2.06	Cleaning white glazed Tiles with spirit and caustic soda including supply of all materials, labour and T&P etc. required for proper completion of the work. (Old agr. rate based on C.S.I. No. 20.09/ Sch rate 27.71)	item106	22	M2
108	2.07	Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in- Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. (Sch. rate 27.91/ 2014/NSI)	item107	80	M2
109	2.08	Providing and fixing false ceiling with 12mm thick plain/semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming IS:3087 finished with a coat of aluminium primer on both sides & edges and tow coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodized aluminium (with 15 micron anodic coating) T-sections 35X15X1.5mm size main runners and cross runners 23.5X19X1.5mm fixed to main runners placed 600mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6mm diameter M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600X1200mm center to center including fixing to the frame with C.P. brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately) (Revsed rate 27.92/2014/OLD C.S.I. No. 16.03)\n.	item108	8	M2
110	2.09	P/F fully Anodized aluminium fixed glazing with HINDALCO or equivalent extruded standard sections14gauge (2.41mm thick) of various cross sections and joints mitred and jointed as shown in drawing including providing & fixing 5.5 mm thick toughened glass with Neoprene beading & aluminium glazing clips all around. The minimum thickness of anodizing on all aluminium sections should be 20 microns with a (+) 2 microns tolerance . The rate should include the cost of fixing the aluminum frame on Teak wood frame or finished wall (RB/RCC/Masonry) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c/c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of Teak frame but including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.52)\n.	item109	2	M2
111	2.1	Same as above item No. 8.52 but for openable window portion as shown in drawings, including cost of Aluminium hinges and all other fittings like concealed tower bolts handles etc of approved quality and including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.53)	item110	2	M2
112	2.11	shown in drawings including cost of hinges and Aluminium fittings like tower bolts, handles, stoppers, push plates, brass body with brass component 6 levers cocealed lock etc of heavy & approved quality and including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.54)	item111	2	M2
113	2.12	S/Fixing of double action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge. including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.55)	item112	2	Each
114	2.13	Supplying & fixing 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all material, labour and T&P. (CSI No. 8.63)	item113	5	M2
115	2.14	Supply and fixing 24 B.W.G , G.C. Iron Sheet roofing .fixed in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. (CSI No. 10.01)	item114	5	M2
116	2.15	As in item 10.01 but 6 mm thick grey corrugated asbestos sheet. (CSI No. 10.03)	item115	5	M2
117	2.16	Spreading over leaky roofs with bitumen paints at 0.45 Kg per sq.m. including sweeping, cleaning the roof with brushes, heating of the paints upto the required temperature,pouring it on the surface, spreading of necessary quantity of approved coarse sand 1 cft. per 100 sft. and including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.05)	item116	50	M2
118	2.17	Supply and laying one layer of tar felt or any other equivalent approved material at the junction of wall & roof or at any place as per direction of the Engineer-Incharge including necessary overlap, applying a coat of approved mastic paint below the Tar felt & including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.06)	item117	10	M2
119	2.18	S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer. (CSI No. 11.15)	item118	40	Ltr.
120	2.19	Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01)	item119	100	M2
121	2.2	As in item 13.01 above but for every coat after first coat. (CSI No. 13.02)	item120	100	M2
122	2.21	As in item 13.01 above but for every coat on previously painted old wood or iron work including its sand papering,rubbing and cleaning as required, for proper completion of work. (CSI No. 13.03)	item121	100	M2
123	2.22	Supply and fixing '35mm thick factory made panel' single leaf, hot pressed, phenol Formaldehyde resin bonded, boiling water resistant, commercial quality "Sitapur ply wood" or other ISI Marked Factory made flush door shutters conforming to IS: 2202 Part-1 ( 1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs and/or other fittings approved by Engineer-in-charge but excluding their ( fittings) supply but including painting two coats of black Japan on iron fittings if necessary.(CSI No. 8.24- SOR 2017) (CSI No. 29.05d)	item122	2	M2
124	2.23	Making expansion joints with 24 gauge Aluminium sheet &8 inch wide tarfelt fixed with tarmastic in roof or floors fitting joints with approved bitumen as per direction of Engg.-in-charge incl. supply of all material , labour & T&P etc. for proper completion of work.(CSI No. 10.14- SOR 2017) (CSI No. 29.29)	item123	2	RM
125	2.24	Flooring with P.V.C. tiles 1.5 mm. thick including cost of all materials,labour and T&P etc. required for proper completion of the work. (Old C.S.I No. 12.31)	item124	2	M2
126	2.25	Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made). (CSI No. 20.16)	item125	3	M3