Mahanadi Coalfields Limited has published Day To Day Maintenance Including Up Keeping Work At N S Nagar Township , Bocp Under Bharatpur Area. Submission Date for this Tender is 29-05-2021. Housekeeping Services Tenders in N S Nagar Township, Bharatpur Distt Angul Odisha. Bidders can get complete Tender details and download the document.
Name of work : | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Carpentry , Steel, Grill, Window works | BI01010001010000000000000515BI0100001113 | ||
2 | 1.001 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:\n30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001114 | 2000 | sqm |
3 | 1.002 | Providing and fixing to existing door frames:\n24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). | BI01010001010000000000000515BI0100001115 | 1500 | sqm |
4 | 1.003 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete\nFixed to openings /wooden frames with rawl plugs screws etc. | BI01010001010000000000000515BI0100001116 | 16720 | kg |
5 | 1.004 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).\n25 mm thick\n | BI01010001010000000000000515BI0100001117 | 150 | sqm |
6 | 1.005 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :\nFor fixed portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)\n | BI01010001010000000000000515BI0100001118 | 300 | kg |
7 | 1.006 | Applying priming coat:\nWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | BI01010001010000000000000515BI0100001119 | 1000 | sqm |
8 | 1.007 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm | BI01010001010000000000000515BI0100001120 | 1200 | sqm |
9 | 1.008 | Renewal of old putty of glass panes (length) | BI01010001010000000000000515BI0100001121 | 4800 | metre |
10 | 1.009 | Providing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), complete. | BI01010001010000000000000515BI0100001122 | 20 | Each |
11 | 1.01 | Providing ISI marked oxidised M.S. sliding door bolts : 250x16 mm | BI01010001010000000000000515BI0100001123 | 450 | Each |
12 | 1.011 | Providing ISI marked oxidised M.S. handles conforming to IS:4992 : 125 mm | BI01010001010000000000000515BI0100001124 | 500 | Each |
13 | 1.012 | Providing ISI marked oxidised M.S. handles conforming to IS:4992 : 100 mm | BI01010001010000000000000515BI0100001125 | 300 | Each |
14 | 1.013 | Providing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) : 250x10 mm | BI01010001010000000000000515BI0100001126 | 400 | Each |
15 | 1.014 | Providing ISI marked oxidised M.S. tower bolt blackfinish, (Barrel type) : 150x10 mm | BI01010001010000000000000515BI0100001127 | 400 | Each |
16 | 1.015 | Providing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade : 150x10 mm | BI01010001010000000000000515BI0100001128 | 300 | Each |
17 | 1.016 | Providing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade : 100 mm with plate 150X32mm | BI01010001010000000000000515BI0100001129 | 300 | Each |
18 | 1.017 | Providing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, : 250x16 mm | BI01010001010000000000000515BI0100001130 | 100 | Each |
19 | 1.018 | Providing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, . Twin rubber stopper | BI01010001010000000000000515BI0100001131 | 100 | Each |
20 | 1.019 | Providing ISI marked M.S. pressed butt hinges bright finished etc. complete : 125x65x2.12 mm | BI01010001010000000000000515BI0100001132 | 500 | Each |
21 | 1.02 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :\nFor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\nAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | BI01010001010000000000000515BI0100001133 | 250 | kg |
22 | 1.021 | Providing curtain rods of 1.25 mm thick chromium plated brass plate :20 mm dia | BI01010001010000000000000515BI0100001134 | 250 | Meter |
23 | 1.022 | Providing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete :25 mm dia | BI01010001010000000000000515BI0100001135 | 250 | Meter |
24 | 1.023 | Providing and fixing to existing door frames\n30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001136 | 100 | sqm |
25 | 1.024 | Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood | BI01010001010000000000000515BI0100001137 | 2000 | sqm |
26 | 1.025 | Providing Aluminum sheet 28 gauge as per instruction of engineer in charge | BI01010001010000000000000515BI0100001138 | 600 | Sqm |
27 | 1.026 | Providing SS wire mesh jali for doors and windows of 22 guage 18 mesh per sq inch as per instruction of EIC Grade: 304 | BI01010001010000000000000515BI0100001139 | 600 | Sqm |
28 | 1.027 | Labour charges for day to day maintenance works related with welding of flats in window grills & other petty jobs related with welding works as and when required by deploying 1 nos welder and 1 helper | BI01010001010000000000000515BI0100001140 | 288 | Day |
29 | 1.028 | Labour charges for engaging 2 nos carpenter & 3 nos helper daily for day to day carpentry works of colony as per instruction of EIC (on week days) | BI01010001010000000000000515BI0100001141 | 1220 | Manday |
30 | 1.029 | Supplying Chromium plated brackets for ( curtain rods) | BI01010001010000000000000515BI0100001142 | 5000 | Each |
31 | 1.03 | Supplying Brass screws 30 mm | BI01010001010000000000000515BI0100001143 | 6000 | Each |
32 | 1.031 | Supplying Bright finished or black enamelled mild steel screws 50 mm | BI01010001010000000000000515BI0100001144 | 6000 | Each |
33 | 1.032 | Supplying Oxidised mild steel screws 35 mm | BI01010001010000000000000515BI0100001145 | 10000 | Each |
34 | 1.033 | Supplying Chromium plated Brass screws 25 mm | BI01010001010000000000000515BI0100001146 | 5000 | Each |
35 | 1.034 | Supplying Chromium plated Brass screws 30 mm | BI01010001010000000000000515BI0100001147 | 8000 | Each |
36 | 1.035 | Supplying Oxidised mild steel screws 30 mm | BI01010001010000000000000515BI0100001148 | 7000 | Each |
37 | 1.036 | Supplying Oxidised mild steel screws 25 mm | BI01010001010000000000000515BI0100001149 | 6000 | Each |
38 | 1.037 | Supplying Bright finished or black enamelled mild steel bolts and nuts 50x6 mm | BI01010001010000000000000515BI0100001150 | 1000 | Each |
39 | 1.038 | Suppying Bright finished or black enamelled mild steel butt hinges 125x65x2.12 mm | BI01010001010000000000000515BI0100001151 | 1000 | Each |
40 | 1.039 | Providing welding rod as per instruction of EIC | BI01010001010000000000000515BI0100001152 | 250 | Pkt |
41 | 2 | Cement Work | BI01010001010000000000000515BI0100001153 | ||
42 | 2.001 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil | BI01010001010000000000000515BI0100001154 | 89 | Cum |
43 | 2.002 | Supplying and filling in plinth with river sand under floors, including watering, ramming, consolidating and dressing complete. | BI01010001010000000000000515BI0100001155 | 34 | Cum |
44 | 2.003 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001156 | 34 | Cum |
45 | 2.004 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001157 | 330 | sqm |
46 | 2.005 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001158 | 34 | Cum |
47 | 2.006 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)\n | BI01010001010000000000000515BI0100001159 | 990 | sqm |
48 | 2.007 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001160 | 500 | sqm |
49 | 2.008 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) | BI01010001010000000000000515BI0100001161 | 1000 | Sqm |
50 | 2.009 | Brick work with Fly Ash Brick (230x125x75 mm size) bricks of class designation 10 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001162 | 59 | cum |
51 | 2.01 | Brick work with Fly Ash Brick (230x125x75 mm size) bricks of class designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001163 | 75 | Cum |
52 | 2.011 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.: 40 mm thick with 20 mm nominal size stone aggregate | BI01010001010000000000000515BI0100001164 | 1780 | sqm |
53 | 2.012 | Grading roof for water proofing treatment with\nCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001165 | 10 | cum |
54 | 2.013 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001166 | 300 | sqm |
55 | 2.014 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001167 | 250 | sqm |
56 | 2.015 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001168 | 250 | sqm |
57 | 2.016 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001169 | 9 | Cum |
58 | 2.017 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.\nOne or more coats on old work\n | BI01010001010000000000000515BI0100001170 | 36495 | sqm |
59 | 2.018 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work | BI01010001010000000000000515BI0100001171 | 10617 | sqm |
60 | 2.019 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). | BI01010001010000000000000515BI0100001172 | 1000 | sqm |
61 | 2.02 | Finishing walls with Acrylic Smooth exterior paint of required shade :\nNew work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)\n | BI01010001010000000000000515BI0100001173 | 500 | sqm |
62 | 2.021 | Supply of water proofing compound(Dr fixit LW+ or equivalent) of approved quality as per instruction of EIC | BI01010001010000000000000515BI0100001174 | 124 | Litre |
63 | 2.022 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001175 | 205 | sqm |
64 | 2.023 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001176 | 23 | cum |
65 | 2.024 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars | BI01010001010000000000000515BI0100001177 | 4350 | Kg |
66 | 2.025 | Centering and shuttering including strutting, propping etc. and removal of form work for :\nRetaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. | BI01010001010000000000000515BI0100001178 | 175 | sqm |
67 | 2.026 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar | BI01010001010000000000000515BI0100001179 | 20 | Cum |
68 | 2.027 | Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).: Medium shade pigment using 50% white cement 50% Grey cement | BI01010001010000000000000515BI0100001180 | 50 | sqm |
69 | 2.028 | CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Lime , moorum, building rubbish for 1 km | BI01010001010000000000000515BI0100001181 | 117.81 | Cum |
70 | 2.029 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface ::Water thinnable cement primer | BI01010001010000000000000515BI0100001182 | 1990 | sqm |
71 | 2.03 | Cleaning of toilet , room ,chhajas ,roof and surrounding area for newly alloted quarters including the cost of tools and materials required for cleaning as per instruction of the EIC(The agency has to supply two nos manpower per day) | BI01010001010000000000000515BI0100001183 | 205 | Day |
72 | 2.031 | Providing of white cement (1 kg pack) J&K or Birla or approved equivalent brand as per instruction of EIC | BI01010001010000000000000515BI0100001184 | 250 | Kg |
73 | 2.032 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats) | BI01010001010000000000000515BI0100001185 | 1521 | sqm |
74 | 2.033 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | BI01010001010000000000000515BI0100001186 | 40 | Cum |
75 | 2.034 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :\n1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001187 | 50 | cum |
76 | 2.035 | Providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade: Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001188 | 50 | sqm |
77 | 2.036 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge : Granite work | BI01010001010000000000000515BI0100001189 | 150 | metre |
78 | 2.037 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete | BI01010001010000000000000515BI0100001190 | 500 | Sqm |
79 | 2.038 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001191 | 200 | sqm |
80 | 2.039 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | BI01010001010000000000000515BI0100001192 | 1000 | sqm |
81 | 2.04 | Painting with aluminium paint of approved brand and manufacture to give an even shade \nTwo or more coats on new work | BI01010001010000000000000515BI0100001193 | 250 | sqm |
82 | 2.041 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade\nNew work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001194 | 2000 | sqm |
83 | 2.042 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work | BI01010001010000000000000515BI0100001195 | 500 | sqm |
84 | 2.043 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | BI01010001010000000000000515BI0100001196 | 30410 | sqm |
85 | 2.044 | Neat cement punning. | BI01010001010000000000000515BI0100001197 | 1000 | sqm |
86 | 2.045 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) | BI01010001010000000000000515BI0100001198 | 500 | sqm |
87 | 2.046 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm | BI01010001010000000000000515BI0100001199 | 500 | sqm |
88 | 2.047 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet | BI01010001010000000000000515BI0100001200 | 250 | sqm |
89 | 2.048 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 fine sand)\n | BI01010001010000000000000515BI0100001201 | 1000 | sqm |
90 | 2.049 | Day to day petty cement,masonry works excluding the cost of materials(The agency has to supply 2 nos mason(skilled) and 2 nos unskilled labour per day as per instruction of EIC) | BI01010001010000000000000515BI0100001202 | 610 | Day |
91 | 2.05 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001203 | 6000 | kg |
92 | 2.051 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick | BI01010001010000000000000515BI0100001204 | 200 | sqm |
93 | 2.052 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | BI01010001010000000000000515BI0100001205 | 50 | sqm |
94 | 2.053 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.: Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001206 | 50 | sqm |
95 | 2.054 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001207 | 100 | sqm |
96 | 2.055 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.\nRaj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble : Area of slab upto 0.50 sqm | BI01010001010000000000000515BI0100001208 | 20 | sqm |
97 | 2.056 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001209 | 600 | sqm |
98 | 2.057 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter .(600 mm over all girth) | BI01010001010000000000000515BI0100001210 | 250 | metre |
99 | 2.058 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | BI01010001010000000000000515BI0100001211 | 250 | metre |
100 | 2.059 | Half brick masonry with Fly Ash Brick (230x125x75 mm size) bricks of class designation 10 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001212 | 200 | Sqm |
101 | 2.06 | Half brick masonry with Fly Ash Brick (230x125x75 mm size) bricks of class designation 10 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | BI01010001010000000000000515BI0100001213 | 300 | Sqm |
102 | 2.061 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001214 | 2500 | sqm |
103 | 2.062 | Supply of Portland Cement as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001215 | 700 | Bag of 50 Kg |
104 | 2.063 | Supply and stacking at work site coarse clean sand with lead and royalty.all complete | BI01010001010000000000000515BI0100001216 | 55 | Cum |
105 | 2.064 | Supply of 20 mm size aggregate at work site as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001217 | 50 | Cum |
106 | 2.065 | Supply of 10 mm size aggregate at work site as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001218 | 50 | Cum |
107 | 2.066 | Supply of crack fill powder as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001219 | 150 | Kg |
108 | 2.067 | Supplying of putty as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001220 | 400 | Kg |
109 | 2.068 | Lettering with black Japan paint of approved brand and manufacture | BI01010001010000000000000515BI0100001221 | 12000 | per letter per cm height |
110 | 3 | WATER SUPPLY | BI01010001010000000000000515BI0100001222 | ||
111 | 3.001 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.\nInternal work - Exposed on wall 15 mm dia nominal bore | BI01010001010000000000000515BI0100001223 | 180 | metre |
112 | 3.002 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore | BI01010001010000000000000515BI0100001224 | 180 | metre |
113 | 3.003 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore | BI01010001010000000000000515BI0100001225 | 180 | metre |
114 | 3.004 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 40 mm dia nominal bore | BI01010001010000000000000515BI0100001226 | 180 | metre |
115 | 3.005 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. \nConcealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001227 | 100 | metre |
116 | 3.006 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.\nConcealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001228 | 300 | metre |
117 | 3.007 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.:110 mm diameter | BI01010001010000000000000515BI0100001229 | 480 | metre |
118 | 3.008 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.\nExternal work :65 mm dia nominal bore | BI01010001010000000000000515BI0100001230 | 180 | metre |
119 | 3.009 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001231 | 102500 | per litre |
120 | 3.01 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :\n100 mm diameter : Class I | BI01010001010000000000000515BI0100001232 | 16 | each |
121 | 3.011 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter : Class II | BI01010001010000000000000515BI0100001233 | 20 | each |
122 | 3.012 | Welding by gas or electric plant including transportation of plant at site etc. complete. | BI01010001010000000000000515BI0100001234 | 1500 | cm |
123 | 3.013 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil\nPipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | BI01010001010000000000000515BI0100001235 | 850 | metre |
124 | 3.014 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001236 | 30 | each |
125 | 3.015 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001237 | 200 | each |
126 | 3.016 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001238 | 48 | hour |
127 | 3.017 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\nWhite Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001239 | 200 | each |
128 | 3.018 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm | BI01010001010000000000000515BI0100001240 | 96 | each |
129 | 3.019 | Providing and fixing PVC pipes (working pressur 6 kg/cm2) 110mm dia including jointing of pipes and testing of joints complete as per direction of Engineer in Charge. (External work). | BI01010001010000000000000515BI0100001241 | 850 | meter |
130 | 3.02 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.\nExternal work 100 mm dia nominal bore metre | BI01010001010000000000000515BI0100001242 | 150 | meter |
131 | 3.021 | Providing Kirloskaror equivalent CI sluice valves as per instruction of Engineer-incharge.: 80 mm | BI01010001010000000000000515BI0100001243 | 12 | each |
132 | 3.022 | Supply of Butterfly valves (with cap) complete with bolts, nuts, rubber insertions: 150 mm diameter: Class I of approved make | BI01010001010000000000000515BI0100001244 | 10 | Each |
133 | 3.023 | Supply of Butterfly valves (with cap) complete with bolts, nuts, rubber insertions: 100 mm diameter: Class I of approved make | BI01010001010000000000000515BI0100001245 | 10 | Each |
134 | 3.024 | Providing Chlorinated Polyvinyl - chloride (CPVC) 20 mm nominal bore of approved quality. | BI01010001010000000000000515BI0100001246 | 1200 | mtr |
135 | 3.025 | Providing Chlorinated Polyvinyl - chloride (CPVC)pipes , having thermal stability for hot & cold water supply 25 mm nominal bore of approved quality. | BI01010001010000000000000515BI0100001247 | 500 | mtr |
136 | 3.026 | Providing Chlorinated Polyvinyl - chloride (CPVC)pipes , having thermal stability for hot & cold water supply pipe 32 mm outer dia \n\n | BI01010001010000000000000515BI0100001248 | 250 | metre |
137 | 3.027 | Providing Chlorinated Polyvinyl - chloride (CPVC)pipes , having thermal stability for hot & cold water supply pipe 40 mm outer dia | BI01010001010000000000000515BI0100001249 | 400 | metre |
138 | 3.028 | Providing Chlorinated Polyvinyl - chloride (CPVC) pipes, having thermal stability for hot & cold water supply pipe 50 mm outer dia | BI01010001010000000000000515BI0100001250 | 200 | metre |
139 | 3.029 | Providing CI bracket for sink as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001251 | 100 | pair |
140 | 3.03 | Providing CI bracket for wash basin as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001252 | 100 | pair |
141 | 3.031 | Providing Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001253 | 330 | each |
142 | 3.032 | Providing Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001254 | 350 | each |
143 | 3.033 | Providing 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001255 | 200 | each |
144 | 3.034 | Providing mirror of superior make glass 600X450 mm, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001256 | 200 | each |
145 | 3.035 | Providing Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe), as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001257 | 180 | each |
146 | 3.036 | Providing nuts and bolts 20mmX65mm, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001258 | 600 | each |
147 | 3.037 | Providing C.P.brass bib cock 15 mm nominal bore of approved quality, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001259 | 120 | each |
148 | 3.038 | Providing C.P.brass stop cock 15 mm nominal bore of approved quality, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001260 | 80 | each |
149 | 3.039 | Providing C.P Pillar cock 15mm nominal bore of approved brand (Plaza brand or equivalent) as per instruciton of EIC as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001261 | 300 | each |
150 | 3.04 | Providing C.P. waste 32mm dia for Basin as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001262 | 240 | each |
151 | 3.041 | Providing C.P. waste 40 mm for Sink as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001263 | 300 | each |
152 | 3.042 | Providing PVC union 20 mm dia as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001264 | 220 | each |
153 | 3.043 | Providing brass R.S. (20mm to 15 mm) as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001265 | 200 | each |
154 | 3.044 | Providing brass R.T. (20mm to 15 mm) as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001266 | 200 | each |
155 | 3.045 | Providing F.T.A(20mm) Plain as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001267 | 250 | each |
156 | 3.046 | Providing M.T.A(20mm to 15 mm) as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001268 | 250 | each |
157 | 3.047 | Providing brass bib cock 15 mm dia of approved quality as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001269 | 1200 | each |
158 | 3.048 | Providing brass stop cock 15 mm dia of approved quality. as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001270 | 160 | each |
159 | 3.049 | Providing Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001271 | 500 | each |
160 | 3.05 | Providing cPVC brass elbow 20 x 15mm dia as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001272 | 600 | each |
161 | 3.051 | Providing CPVC elbow 20mm dia, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001273 | 700 | each |
162 | 3.052 | Providing CPVC Tee 40 x 20mm dia, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001274 | 100 | each |
163 | 3.053 | Providing CPVC Tee 20mm dia, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001275 | 400 | each |
164 | 3.054 | Providing CPVC union 25mm dia as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001276 | 300 | each |
165 | 3.055 | Providing stainless steel spindle for 100mm dia sluice valve with GM check nut as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001277 | 30 | each |
166 | 3.056 | Providing stainless steel spindle for 150 mm dia sluice valve with GM check nut, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001278 | 30 | each |
167 | 3.057 | Providing gland packing for sluice valve (5/8",4/2"), as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001279 | 80 | kg |
168 | 3.058 | Providing P.V.C. socket 25 mm dia, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001280 | 350 | each |
169 | 3.059 | Providing P.V.C. socket 20 mm dia. as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001281 | 750 | each |
170 | 3.06 | Providing PVC cistern flush pipe of 0.75 m length and 32mm mm dia of superior quality, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001282 | 150 | each |
171 | 3.061 | Providing cpvc Elbow 25mm, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001283 | 150 | each |
172 | 3.062 | Providing 15 mm C.P. brass tap, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001284 | 320 | each |
173 | 3.063 | Providing nipple for PVC tank 20mm, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001285 | 250 | each |
174 | 3.064 | Providing PVC washer for bib cock and stop cock, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001286 | 2500 | each |
175 | 3.065 | Providing GI nipple 15 mm dia 6" length, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001287 | 120 | each |
176 | 3.066 | Providing GI nipple 15 mm dia 3" length, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001288 | 120 | each |
177 | 3.067 | Providing GI nipple 15 mm dia 4" length, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001289 | 120 | each |
178 | 3.068 | Providing GI nipple 20 mm dia 3" length as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001290 | 120 | each |
179 | 3.069 | Providing GI nipple 20 mm dia 4" length as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001291 | 120 | each |
180 | 3.07 | Providing GI nipple 20 mm dia 6" length as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001292 | 120 | each |
181 | 3.071 | Providing GI reducing socket 20 mm dia to 15 mm dia as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001293 | 120 | each |
182 | 3.072 | Providing GI reducing socket 25 mm dia to 20mm dia as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001294 | 120 | each |
183 | 3.073 | Providing of M-Seal or equivalent water silitant(in Pkt of 100 gm) as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001295 | 1500 | Pkt of 100 Gm |
184 | 3.074 | Providing GI Tee (equal) 25 mm as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001296 | 120 | each |
185 | 3.075 | Providing GI union 15 mm as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001297 | 120 | each |
186 | 3.076 | Providing GI union 20 mm as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001298 | 120 | each |
187 | 3.077 | Providing GI union 25 mm as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001299 | 100 | each |
188 | 3.078 | Providing of heavy duty brass spindle for pillar cock,bib cock,stop cock | BI01010001010000000000000515BI0100001300 | 800 | each |
189 | 3.079 | Providing GI elbow 15 mm dia as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001301 | 120 | each |
190 | 3.08 | Providing GI elbow 20 mm dia as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001302 | 120 | each |
191 | 3.081 | Providing GI elbow 25 mm dia as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001303 | 100 | each |
192 | 3.082 | Providing GI Tee (equal) 15 mm as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001304 | 120 | each |
193 | 3.083 | Providing GI Tee (equal) 20 mm as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001305 | 120 | each |
194 | 3.084 | Providing adhesive for PVC pipe line as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001306 | 25 | kg |
195 | 3.085 | Providing H.P. or L.P. ball valve with polythene floats as per instruction of Engineer-incharge.: 20 mm dia | BI01010001010000000000000515BI0100001307 | 100 | each |
196 | 3.086 | Providing shower rose CP brass inlet 15 mm to 20 mm dia 100 mm as per instruction of Engineer-incharge.. | BI01010001010000000000000515BI0100001308 | 300 | each |
197 | 3.087 | Providing Brass full way valve with C.I. wheel (screwed end) as per instruction of Engineer-incharge.: 40 mm dia | BI01010001010000000000000515BI0100001309 | 50 | each |
198 | 3.088 | Providing HDPE tank cover as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001310 | 300 | each |
199 | 3.089 | 15 mm PTMT bib cock as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001311 | 150 | each |
200 | 3.09 | PTMT pillar cock as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001312 | 180 | each |
201 | 3.091 | Providing CPVC union 32 mm dia. as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001313 | 120 | each |
202 | 3.092 | Providing CPVC union 40 mm dia. as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001314 | 120 | each |
203 | 3.093 | Providing CPVC union 50 mm dia as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001315 | 80 | each |
204 | 3.094 | Providing brass R.S. (32mm) as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001316 | 120 | each |
205 | 3.095 | Providing brass R.S. (40mm) as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001317 | 120 | each |
206 | 3.096 | Providing brass R.S. (50mm) as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001318 | 120 | each |
207 | 3.097 | Providing brass R.T. (32mm) as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001319 | 120 | each |
208 | 3.098 | Providing brass R.T. (40mm) as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001320 | 150 | each |
209 | 3.099 | Providing CPVC elbow 32mm dia as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001321 | 150 | each |
210 | 3.1 | Providing CPVC elbow 40mm dia as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001322 | 150 | each |
211 | 3.101 | Providing CPVC Tee 32mm dia as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001323 | 150 | each |
212 | 3.102 | Providing CPVC Tee 40mm dia as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001324 | 150 | each |
213 | 3.103 | Providing CPVC socket 32 mm dia as per instruction of Engineer-incharge.. | BI01010001010000000000000515BI0100001325 | 150 | each |
214 | 3.104 | Providing CPVC socket 40 mm dia as per instruction of Engineer-incharge.. | BI01010001010000000000000515BI0100001326 | 150 | each |
215 | 3.105 | Providing PVC valve 25mm dia. as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001327 | 60 | each |
216 | 3.106 | Providing PVC valve 20mm dia. as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001328 | 60 | each |
217 | 3.107 | Providing PVC valve 40mm dia. as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001329 | 60 | each |
218 | 3.108 | Day to day maintenance of water supply pipe line as per instruction of EIC {2 nos fitters (1 No highly skilled,1 nos skilled)} to be engaged daily in First shift and 1 No skilled fitter to be engaged in 2nd shift and 1 No Skilled fitter in 3rd shift as per instruction of EIC) | BI01010001010000000000000515BI0100001330 | 610 | day |
219 | 3.109 | Day to day maintenance of water supply pipe line as per instruction of EIC (3 Nos unskilled to be engaged daily in First shift and 1 No. unskilled labour to be engaged daily in 2nd shift and 1 No unskilled labour in 3rd shift as per instruction of EIC) | BI01010001010000000000000515BI0100001331 | 610 | day |
220 | 3.11 | Cleaning of overhead RCC, HDPE tanks of 500 ltrs to 2000 ltrs capacity including flushing out by bleaching powder as per instructions of EIC. | BI01010001010000000000000515BI0100001332 | 3420 | each |
221 | 3.111 | Cleaning and dewatering of all water line valve chambers as per instruction of EIC | BI01010001010000000000000515BI0100001333 | 610 | day |
222 | 3.112 | Providing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,. Single tee with door 110x110x110 mm, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001334 | 250 | Each |
223 | 3.113 | Providing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, door Bend 87.5° 110 mm bend, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001335 | 250 | each |
224 | 3.114 | Providing PVC pipe clips of approved design to unplasticised - 110 mm, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001336 | 250 | each |
225 | 3.115 | Supplying pig lead at site of work, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001337 | 80 | kg |
226 | 3.116 | Providing of Wall mixture of approved quality, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001338 | 30 | each |
227 | 3.117 | supplying pig lead at site of work, as per instruction of Engineer-in-charge, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001339 | 50 | each |
228 | 3.118 | Providing of CP Health faucet Jaquar make orapproved equivalent with tube complete set, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001340 | 50 | each |
229 | 3.119 | Providing CP Brass two in one bibcock Jaquar make or equivalent, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001341 | 50 | each |
230 | 3.12 | Providing (32mm) PVC pipe for BoreWell, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001342 | 500 | Mtr |
231 | 3.121 | providing(2.5 mm) Cable for BoreWell, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001343 | 500 | Mtr |
232 | 3.122 | Providing (4mm) Cable for BoreWell, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001344 | 500 | Mtr |
233 | 3.123 | Providing Rope for borewell, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001345 | 500 | mtr |
234 | 3.124 | Providing Starter magnetic coil for Borewell, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001346 | 30 | each |
235 | 3.125 | Lowering and lifting of submersible pump during the maintenance of Borewell as per instructions of EIC. | BI01010001010000000000000515BI0100001347 | 8 | each |
236 | 3.126 | Providing GI pipe clamp of 20mm, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001348 | 1500 | Each |
237 | 3.127 | providing Teflon tapes as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001349 | 1500 | mtr |
238 | 3.128 | Providing PTMT towel rail of approved quality, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001350 | 120 | Each |
239 | 3.129 | Providnig PVC S Trap for Pan, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001351 | 120 | Each |
240 | 3.13 | Providnig PVC P Trap 100 mm X 100mm for Pan, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001352 | 120 | Each |
241 | 3.131 | Providnig Bottole Trap for Pan, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001353 | 30 | Each |
242 | 3.132 | Providing nanhi Trap 110mm x 75mm, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001354 | 150 | Each |
243 | 3.133 | Providing CP Brass Towel Ring size 200mm dia of approved quality, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001355 | 100 | each |
244 | 3.134 | Providing Stainless steel grating 110 mm dia, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001356 | 250 | each |
245 | 3.135 | Day to day maintenance of water supply pipe line as per instruction of EIC (scope of work: The agency has to provide 1 No skilled fitter and 1 No unskilled helper on Sunday, public holiday as per instruction of EIC.) | BI01010001010000000000000515BI0100001357 | 120 | day |
246 | 4 | Part D Cleaning of outside of building portion such as drain, Chamber, road, roof, staircase of colony | BI01010001010000000000000515BI0100001358 | ||
247 | 4.001 | Day to day Cleaning of inspection chamber,gully trap man hole removing sewage from WC pan rain water pipe and sewerage from effectiv functioning of sewer line as per instruction OF EIC -(Scope of work:Agency has to deploy 06 Nos unskilled man power daily for a period of two years) | BI01010001010000000000000515BI0100001359 | 4380 | man day |
248 | 4.002 | Cleaning of Drains without siltation or sludge deposition: Surface drain up to 250 mm wide, as per instruction of Engineer-incharge. (Quantity in Metre)\n\n | BI01010001010000000000000515BI0100001360 | 79560 | 100 m length |
249 | 4.003 | Disposal of dead animal body out side colony,market ,village area including carrage by labour as per direction of engineer in/c (a) Big animal (like cow etc).,as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001361 | 40 | Nos |
250 | 4.004 | Disposal of dead animal body out side colony,market ,village area including carrage by labour as per diriction of engineer in/c (a) Small animal (like Dog, Big Mouse , Cat , Crow etc). | BI01010001010000000000000515BI0100001362 | 70 | Nos |
251 | 4.005 | Day to day Cleaning and sweeping of room ,toilet and permises of school & Colony Sub station as per instruction of Engineer I/C (Two labour deployed per day), as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001363 | 1084 | man day |
252 | 4.006 | Upkeeping of concrete pavement/ Black topped roads excluding coal transport road by brooming and disposal of collected debris/ waste at collection pit/ dustbins or at specified locations within a lead of 50 metres including all tools & plants like spade, basket, brooms with handle stick complete as per the direction of Engineer-In-Charge. (Quantity in Sqm) | BI01010001010000000000000515BI0100001364 | 8.3236e+06 | 100 sqm per day |
253 | 4.007 | Carriage of sludge or manure including of loading unloading and stacking of same at 4 kms lead, as per instruction of Engineer-incharge. | BI01010001010000000000000515BI0100001365 | 1550 | cum |
254 | 4.008 | Removal of chokage / blockage of manholes by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-InCharge.\n | BI01010001010000000000000515BI0100001366 | 720 | each |
255 | 4.009 | Clearing jungle including uprooting of rank vegetation, grass,brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared, as per instruction of Engineer-incharge.(Quantity in Sqm)\n | BI01010001010000000000000515BI0100001367 | 48000 | 100 sqm |
256 | 4.01 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared, as per instruction of Engineer-incharge.\n | BI01010001010000000000000515BI0100001368 | 60000 | 100\nsqm |
257 | 4.011 | Weekly sweeping and cleaning with water of staircase from top quarter to road including cleaning of garbage, uprooting of grass on both side of passage from main road to stair case with disposal of garbage and other waste to nearby dustbin as per the instruction of engineer incharge. | BI01010001010000000000000515BI0100001369 | 10400 | per block |
258 | 4.012 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 60 cm girth upto and including 120 cm girth | BI01010001010000000000000515BI0100001370 | 20 | nos |
259 | 4.013 | Trimming of different kinds of trees grown on roofs,walls & other masonary structure of quarters ,cutting of trenches of out side trees obstructing the quarters including applying necessary chemicals making necessary arrangements for cutting trees & carrying the same to dustbin etc complete as per direction of EIC. | BI01010001010000000000000515BI0100001371 | 360 | block |
260 | 4.014 | Providing ladder of bamboo make having 2 nos vertical member of 7mtr length & 12nos horizontal member of 800mm tie with rope as per instruction of EIC. | BI01010001010000000000000515BI0100001372 | 2 | nos |
261 | 4.015 | Roof cleaning,terrace cleaning of all types of quarters of N S nagar colony 4 times a year by unskilled manpower,The agency has to provide unskilled manpower during the work to dispose the materials collected from roof to nearby garbage | BI01010001010000000000000515BI0100001373 | 436 | block |
262 | 4.016 | Cleaning of Drains without siltation or sludge deposition: Open Surface drain above 250 mm width.\n\n | BI01010001010000000000000515BI0100001374 | 853424 | 100 m length |
263 | 5 | Part-E Dispensary, Club and D type upkeeping) | BI01010001010000000000000515BI0100001375 | ||
264 | 5.001 | Up-keeping of inside and out side of club buildings in/c (a) daily cleaning of floor by brooming and mopping (b) dusting of walls and removal of cobwebs with over head brooms and dry cloth © cleaning and dusting of furniture etc of the club as and when required (d) daily cleaning of toilet with water detergent, phynile etc (e) Cleaning small drains as and when required (f) disposal of garbage/debris/mud/dry leaves etc to the near by masonary dustbin by supplying 2 Nos unskilled manpower in first shift and 1 No unskilled manpower in second shift. | BI01010001010000000000000515BI0100001376 | 1830 | Manday |
265 | 5.002 | Labour charge for extra manpower for cleaning of utensils, arranging chairs, tables etc for special occasions at Brahmani club and rabindra Bharati club which may happen on any day including sundays & PHD or in any shift as per the direction of Engineer in charge. | BI01010001010000000000000515BI0100001377 | 240 | Manday |
266 | 5.003 | Supplying of Harpic or equivalent (500 ml pack) as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001378 | 80 | Each |
267 | 5.004 | Supplying of detergent powder of approved make as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001379 | 200 | Kg |
268 | 5.005 | Supplying of Room freshner (400 ml pack) as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001380 | 150 | Each |
269 | 5.006 | Supplying of Napthalene ball of 50 gm pack as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001381 | 10 | 50 Gm Pack |
270 | 5.007 | Supplying of godrej aer pocket or equivalent (50 gm pack ) as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001382 | 60 | Each |
271 | 5.008 | Supplying of Phenyl as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001383 | 200 | Ltr |
272 | 5.009 | Supplying of Liquid soap (215 ml pack, lifeboy or equivalent) as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001384 | 30 | Each |
273 | 5.01 | Supplying of long hand broom as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001385 | 60 | Each |
274 | 5.011 | Supplying of Over head broom as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001386 | 40 | Each |
275 | 5.012 | Supplying of Mop as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001387 | 25 | Each |
276 | 5.013 | Supplying of Spade as per the instruction of Engineer in charge. | BI01010001010000000000000515BI0100001388 | 5 | Each |
277 | 5.014 | Cleaning sweeping of Dispensary and Civil Maintenance office at N.S.Nagar of Bharatpur OCP and removing debris and garbage to the near by dustbin as per instruction of Engineer I/c. (Agency needs to provide 02 Unskilled manpower on each working days for 02 years as per instruction of EIC) | BI01010001010000000000000515BI0100001389 | 1220 | mandays |
278 | 5.015 | Cleaning of toilets (not attached to office / service or werlfare buildings), its floor and dados including applying of phenyle, napthalene balls, harpic, detergents etc as per the direction of Engineer-In-Charge. (Cost of Phenyle, naphthalene balls, harpic, detergents etc. to be paid separetely)\n | BI01010001010000000000000515BI0100001390 | 21960 | each |
279 | 6 | Part-F Garbage disposal | BI01010001010000000000000515BI0100001391 | ||
280 | 6.001 | Door to door collection of garbage from A,B,C and D type of NS Nagar colony daily basis and disposal at nearest garbage bin (The agency has to supply 8 no unskilled manpower daily for door to door collection and disposal) | BI01010001010000000000000515BI0100001392 | 4880 | manday |
281 | 6.002 | Providing 660 litre 4 wheeler HDPE garbage trolly of approved brand as per instruction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001393 | 12 | each |
282 | 6.003 | Carriage of garbage or earth mixed other wastes by tractor trolley including manual loading and unloading and disposing at garbage dumps or at any other specified location as per the direction of Engineer-In-Charge.For lead of 4 km | BI01010001010000000000000515BI0100001394 | 9150 | Cum |
283 | 6.004 | Cleaning and removal of garbage during festivals, club celebrations or other such events and to remove fallen trees after cyclones etc as per direction of engineer-in-charge. (Four unskilled manpower per day). | BI01010001010000000000000515BI0100001395 | 80 | day |
284 | 7 | Part-G Gardening +B310 | BI01010001010000000000000515BI0100001396 | ||
285 | 7.001 | Maintenance of Garden at STP and Brahmini club,Divider Wall, C and D type quarters front island, GM bungalow, PO Bunglow, shopping Center and Mandir Complex, Park and other gardens inside NS NAGAR Bharatpur Project (The agency has to provide 1 No semi-skilled manpower and 12 Nos unskilled manpower daily except sunday and holiday) | BI01010001010000000000000515BI0100001397 | 610 | day |
286 | 7.002 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Urea | BI01010001010000000000000515BI0100001398 | 2 | Bag of 50 Kg |
287 | 7.003 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Gromor 28-28-0 | BI01010001010000000000000515BI0100001399 | 2 | Bag of 50 Kg |
288 | 7.004 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Murite of potash | BI01010001010000000000000515BI0100001400 | 2 | Bag of 50 Kg |
289 | 7.005 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Mustard cake | BI01010001010000000000000515BI0100001401 | 80 | KG |
290 | 7.006 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Neem cake | BI01010001010000000000000515BI0100001402 | 50 | Kg |
291 | 7.007 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Bone meal dust | BI01010001010000000000000515BI0100001403 | 80 | KG |
292 | 7.008 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge :Rose mixure | BI01010001010000000000000515BI0100001404 | 40 | KG |
293 | 7.009 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Super phosphate | BI01010001010000000000000515BI0100001405 | 2 | Bag of 50 Kg |
294 | 7.01 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge :Thimate | BI01010001010000000000000515BI0100001406 | 25 | KG |
295 | 7.011 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Rogor | BI01010001010000000000000515BI0100001407 | 60 | KG |
296 | 7.012 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Bavistin | BI01010001010000000000000515BI0100001408 | 50 | KG |
297 | 7.013 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Gamaxin | BI01010001010000000000000515BI0100001409 | 50 | KG |
298 | 7.014 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Monocrotopos | BI01010001010000000000000515BI0100001410 | 100 | Ltr |
299 | 7.015 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge :DAP 18-46-0 | BI01010001010000000000000515BI0100001411 | 3 | Bag of 50 Kg |
300 | 7.016 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : O-mite | BI01010001010000000000000515BI0100001412 | 200 | Pkt 100ml |
301 | 7.017 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Chloropyriphos (liquid) | BI01010001010000000000000515BI0100001413 | 100 | Ltr |
302 | 7.018 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge " Harbozime | BI01010001010000000000000515BI0100001414 | 50 | KG |
303 | 7.019 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : Chloropyriphos (powder) | BI01010001010000000000000515BI0100001415 | 50 | KG |
304 | 7.02 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge : SAP | BI01010001010000000000000515BI0100001416 | 100 | 100gm Pkt |
305 | 7.021 | Supplying of manure and pesticides/ insectisides as per dirction of Engineer In charge :Dhanjime | BI01010001010000000000000515BI0100001417 | 400 | KG |
306 | 7.022 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.: Antirrhinum | BI01010001010000000000000515BI0100001418 | 2000 | Each |
307 | 7.023 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Helichrysum | BI01010001010000000000000515BI0100001419 | 2000 | Each |
308 | 7.024 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.: Dianthus | BI01010001010000000000000515BI0100001420 | 2000 | Each |
309 | 7.025 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.: French Marigold | BI01010001010000000000000515BI0100001421 | 3000 | Each |
310 | 7.026 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge. Dahlia | BI01010001010000000000000515BI0100001422 | 2000 | Each |
311 | 7.027 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge. Petunia | BI01010001010000000000000515BI0100001423 | 2000 | Each |
312 | 7.028 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.Geranium | BI01010001010000000000000515BI0100001424 | 1000 | Each |
313 | 7.029 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.: Impatiens | BI01010001010000000000000515BI0100001425 | 2000 | Each |
314 | 7.03 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.: Verbena | BI01010001010000000000000515BI0100001426 | 1000 | Each |
315 | 7.031 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge. Candytuft | BI01010001010000000000000515BI0100001427 | 2000 | Each |
316 | 7.032 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Fly marigold | BI01010001010000000000000515BI0100001428 | 3000 | Each |
317 | 7.033 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Aster | BI01010001010000000000000515BI0100001429 | 3000 | Each |
318 | 7.034 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Celosia | BI01010001010000000000000515BI0100001430 | 3000 | Each |
319 | 7.035 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Inca Marigold | BI01010001010000000000000515BI0100001431 | 1000 | Each |
320 | 7.036 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Salvia | BI01010001010000000000000515BI0100001432 | 2000 | Each |
321 | 7.037 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.Pansy | BI01010001010000000000000515BI0100001433 | 2000 | Each |
322 | 7.038 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Cabbage | BI01010001010000000000000515BI0100001434 | 1000 | Each |
323 | 7.039 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Phlox | BI01010001010000000000000515BI0100001435 | 2000 | Each |
324 | 7.04 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Calendula | BI01010001010000000000000515BI0100001436 | 2000 | Each |
325 | 7.041 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Seed dahlia | BI01010001010000000000000515BI0100001437 | 3000 | Each |
326 | 7.042 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Kochia | BI01010001010000000000000515BI0100001438 | 2500 | Each |
327 | 7.043 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.: Vinka | BI01010001010000000000000515BI0100001439 | 2000 | Each |
328 | 7.044 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.Sunflower | BI01010001010000000000000515BI0100001440 | 2000 | Each |
329 | 7.045 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Zenia | BI01010001010000000000000515BI0100001441 | 2000 | Each |
330 | 7.046 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.:Giladia | BI01010001010000000000000515BI0100001442 | 2000 | Each |
331 | 7.047 | Supply of saplings/seedlings of seasonal flower plants to site for as per instruction of Engineer-in-Charge.: Rose | BI01010001010000000000000515BI0100001443 | 2000 | Each |
332 | 7.048 | Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. The vertical members shall consist of four nos angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. The vertical mambers shall be welded to 4 nos 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect. | BI01010001010000000000000515BI0100001444 | 40 | Each |
333 | 7.049 | Supplying and stacking of good earth at site including royalty and carriage complete (earth measured in stacks will be reduced by 20% for payment). | BI01010001010000000000000515BI0100001445 | 150 | cum |
334 | 7.05 | Supplying and stacking at site dump manure from approved source, including carriage complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm | BI01010001010000000000000515BI0100001446 | 100 | cum |
335 | 7.051 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. | BI01010001010000000000000515BI0100001447 | 200 | cum |
336 | 7.052 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 nos (3 nos horizontal & 4 nos vertical "U" shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.\nTop inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm\n | BI01010001010000000000000515BI0100001448 | 400 | Each |
337 | 8 | Part-H Supervisor for all works | BI01010001010000000000000515BI0100001449 | ||
338 | 8.001 | Providing manpower for supervision and coordination of comprehensive AMC works at Bharatpur N S Nagar colony (The agency has to provide 1 no highly skilled manpower per day as per instruction of EIC) | BI01010001010000000000000515BI0100001450 | 610 | Mandays |
339 | 9 | Electrical work N S Nagar Colony Sub Station , BOCP | BI01010001010000000000000515BI0100001451 | ||
340 | 9.001 | Providing manpower (08 Nos. electricial- skilled + 05 helper-semiskilled with valid license) / day for day to day electrical maintenance work at residential & non-residential building and other electrical installation under N S Nagar Colony including street light etc. of N.S.Nagar Colony, BOCP for 02 years including CMPF, CMPS. | BI01010001010000000000000515BI0100001452 | 730 | Day |
341 | 9.002 | Providing manpower (03 Nos. helper semi skilled) / day for D.G.Set including substation attendent of -2 x 500 KVA Sub Station at Extension Colony of N S Nagar, BOCP for 02 years including CMPF, CMPS | BI01010001010000000000000515BI0100001453 | 730 | Day |
342 | 10 | Providing of Materials for day yo day maintenance | BI01010001010000000000000515BI0100001454 | ||
343 | 10.001 | Supply of 5/6A Switch as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001455 | 2400 | Each |
344 | 10.002 | Supply of 5/6A Socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001456 | 950 | Each |
345 | 10.003 | Supply of 5/6A Top as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001457 | 100 | Each |
346 | 10.004 | Supply of 15/16A Switch as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001458 | 950 | Each |
347 | 10.005 | Supply of 15/16A Socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001459 | 950 | Each |
348 | 10.006 | Supply of 15/16A Top as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001460 | 100 | Each |
349 | 10.007 | Supply of Call Bell as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001461 | 25 | Each |
350 | 10.008 | Supply of Ceiling Rose as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001462 | 290 | Each |
351 | 10.009 | Supply of pendent holder as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001463 | 250 | Each |
352 | 10.01 | Supply of Angle holder as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001464 | 1950 | Each |
353 | 10.011 | Supply of Ceiling Fan capacitor 2.5 MFD as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001465 | 2970 | Each |
354 | 10.012 | Supply of fan ball bearing 6201ZZ as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001466 | 500 | Each |
355 | 10.013 | Supply of fan ball bearing 6202ZZ as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001467 | 500 | Each |
356 | 10.014 | Supply of fan ball bearing 6203ZZ as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001468 | 300 | Each |
357 | 10.015 | Supply of Fan regulator as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001469 | 970 | Each |
358 | 10.016 | Supply of 9W LED Bulbas per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001470 | 1400 | Each |
359 | 10.017 | Supply of 5W LED Bulbas per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001471 | 950 | Each |
360 | 10.018 | Supply of 18/19W LED Tube Light as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001472 | 1800 | Each |
361 | 10.019 | Supply of 10/11W LED Tube Light as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001473 | 300 | Each |
362 | 10.02 | Supply of 90W LED Street Light Fittings as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001474 | 100 | Each |
363 | 10.021 | Supply of 200W LED Flood Light fittings as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001475 | 100 | Each |
364 | 10.022 | Supply of 50W LED Flood Light fittings as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001476 | 50 | Each |
365 | 10.023 | Supply of 40/20W Tube as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001477 | 450 | Each |
366 | 10.024 | Supply of Choke / Ballast for 40W 230 V Tube Light as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001478 | 450 | Each |
367 | 10.025 | Supply of Tube Light Starter 4W 230 V as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001479 | 1950 | Each |
368 | 10.026 | Supply of Tube Light holder for 20W/40W as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001480 | 950 | Each |
369 | 10.027 | Supply of starter holder as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001481 | 300 | Each |
370 | 10.028 | Supply of 400A HRC Fuse, Size 2 as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001482 | 20 | Each |
371 | 10.029 | Supply of 250A HRC Fuse, Size 1 as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001483 | 100 | Each |
372 | 10.03 | Supply of 125A HRC Fuse, Size 00 as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001484 | 60 | Each |
373 | 10.031 | Supply of 100A Porcelain Fuse as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001485 | 400 | Each |
374 | 10.032 | Supply of 125A SDF Unit as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001486 | 5 | Each |
375 | 10.033 | Supply of Cords & cables, flexible Copper wire, VIR Twin 40/0.0076 as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001487 | 45 | Roll |
376 | 10.034 | Supply of 1.5 Sqmm PVC Copper wire as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001488 | 1800 | Metre |
377 | 10.035 | Supply of 2.5 Sqmm PVC Copper wire as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001489 | 1900 | Metre |
378 | 10.036 | Supply of 4 Sqmm PVC Copper wire as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001490 | 1400 | Metre |
379 | 10.037 | Supply of 6 Sqmm PVC Copper wire as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001491 | 1500 | Metre |
380 | 10.038 | Supply of 4 Sqmm PVC Twin core alluminium wire as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001492 | 3800 | Metre |
381 | 10.039 | Supply of 6 Sqmm PVC Twin core alluminium wire as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001493 | 3800 | Metre |
382 | 10.04 | Supply of 16 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001494 | 1500 | Each |
383 | 10.041 | Supply of 25 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001495 | 2000 | Each |
384 | 10.042 | Supply of 35 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001496 | 800 | Each |
385 | 10.043 | Supply of 50 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001497 | 200 | Each |
386 | 10.044 | Supply of 70 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001498 | 300 | Each |
387 | 10.045 | Supply of 95 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001499 | 100 | Each |
388 | 10.046 | Supply of 120 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001500 | 70 | Each |
389 | 10.047 | Supply of 150 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001501 | 50 | Each |
390 | 10.048 | Supply of 240 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001502 | 70 | Each |
391 | 10.049 | Supply of 300 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001503 | 70 | Each |
392 | 10.05 | Supply of 400 Sqmm aluminium socket as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001504 | 50 | Each |
393 | 10.051 | Supply of 16 sqmm aluminum ferrule as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001505 | 2000 | Each |
394 | 10.052 | Supply of 25 sqmm aluminum ferrule as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001506 | 2000 | Each |
395 | 10.053 | Supply of 35sqmm aluminum ferrule as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001507 | 800 | Each |
396 | 10.054 | Supply of PVC Tape 1.8M X 0.125 MM X 9 Mtrs as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001508 | 2000 | Roll |
397 | 10.055 | Supply of 5-32A Single pole MCB as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001509 | 970 | Each |
398 | 10.056 | Supply of 100A TPN Main switch as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001510 | 100 | Each |
399 | 10.057 | Supply of 32A ICDP Main switch as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001511 | 500 | Each |
400 | 10.058 | Supply of Metal box (100mmX100mmX60mm) as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001512 | 150 | Each |
401 | 10.059 | Supply of (150mmX150mmX60mm) Deep metal box as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001513 | 150 | Each |
402 | 10.06 | Supply of (150mmX75mmX60mm) Deep metal box as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001514 | 180 | Each |
403 | 10.061 | Supply of (250mmX200mmX60mm) Deep metal box as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001515 | 145 | Each |
404 | 10.062 | Supply of 250A Switch disconector fuse U as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001516 | 20 | Each |
405 | 10.063 | 40Amp DP MCB,10KA, C-Curve as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001517 | 90 | Each |
406 | 10.064 | 63Amp 4-Pole MCB C-Curve as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001518 | 45 | Each |
407 | 10.065 | 100W P.T. Bulb. as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001519 | 100 | Each |
408 | 10.066 | Supply of 200A 3pole MCCB, C-Curve as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001520 | 10 | Each |
409 | 10.067 | Supply of Electronics Digital Timer as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001521 | 3 | Each |
410 | 10.068 | Supply of 32A 3pole contactor as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001522 | 15 | Each |
411 | 10.069 | Supply of 56A 3pole contactor as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001523 | 3 | Each |
412 | 10.07 | PVC Conduit Pipe(20MM) as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001524 | 2000 | Metre |
413 | 10.071 | PVC fastener 40mm long as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001525 | 3000 | Each |
414 | 10.072 | G.I.Nuts & bolts with washer of siz ¼x1’’,1/4x1 ½’’,1/4x2’’,3/8x1 ½’’,3/8x2’’ each of 05Kg | BI01010001010000000000000515BI0100001526 | 2000 | Each |
415 | 10.073 | G.I. washer heavy duty 1.5 mm thickness of different size. | BI01010001010000000000000515BI0100001527 | 3000 | Each |
416 | 10.074 | M.S. Nuts, Bolts with washer of size 5/8x3’’, 5/8x2 ½’’,as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001528 | 5 | Kg |
417 | 10.075 | M.S. Nuts, Bolts with washer of size ¾x5’’, 5/8x5’’, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001529 | 5 | Kg |
418 | 10.076 | M.S. Nuts, Bolts with washer 5/4x3’’ ¾x4’’, as per instruction of Engineer-in-charge. | BI01010001010000000000000515BI0100001530 | 5 | Kg |
419 | 10.077 | Supply of 3 mm thick phenolic laminated sheet | BI01010001010000000000000515BI0100001531 | 150050 | Sq CM |
420 | 23 | Total impact of GST for the purpose of CTC | BI01010001010000000000000515BI0100001832 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail