}

Repairing Of 3 Nos . Sluice At Narkeldah Nakchira And Debikhali In Blocks Moyna Pingla And Sabang Under East Midnapore Division, Narkeldah, Nakchira,Debikhali, Moyna-West Bengal

Irrigation And Waterways Directorate has published Repairing Of 3 Nos . Sluice At Narkeldah Nakchira And Debikhali In Blocks Moyna Pingla And Sabang Under East Midnapore Division. Submission Date for this Tender is 17-05-2021. Dam Gate Tenders in Narkeldah, Nakchira,Debikhali, Moyna West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

27863476
Repairing Of 3 Nos . Sluice At Narkeldah Nakchira And Debikhali In Blocks Moyna Pingla And Sabang Under East Midnapore Division
Open Tender
Indian
West Bengal
Narkeldah, Nakchira,Debikhali, Moyna
17-05-2021

Tender Details

Repairing Of 3 Nos . Sluice At Narkeldah Nakchira And Debikhali In Blocks Moyna Pingla And Sabang Under East Midnapore Division

Key Value

Document Fees
Refer document
EMD
INR 4438.0 /-
Tender Value
INR 2.21 Lakhs /-

BOQ Items

Name of Work: "Repairing of 3 nos. sluice at Narkeldah, Nakchira and Debikhali in Blocks Moyna, Pingla and Sabang under East Midnapore Division"
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Taking out sluice gate draw shutter gearing arrangements & pedestal including refitting the same with new nuts & bolts where necessary.\n(a) Up to 4 sqm.\n(ii) Taking out only. 1 1.35 Sqm
2 1.01 (b) Above 4 sqm and upto 7 sqm\nTaking out and refitting the same 25.2 Sqm
3 2 Taking out flap shutter of sluice gate including hoisting arrangements and refitting the same with new nuts & bolts where necessary\n(a) Up to 4 sqm.\n(ii) Taking out only.\n 2 5.13 Sqm
4 2.01 (b) Above 4 sqm and upto 7 sqm\nTaking out and refitting the same 25.2 Sqm
5 3 Supplying, fitting, fixing Mild Steel draw shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineer- in-charge) excluding cost of Mild Steel guide channel, sill beam, gearing arrangement etc. but including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site. 753.46 Kg
6 4 Oiling, cleaning & greasing the regulator gate & gate parts including guide channel, top runner, pedestal block, gear rods, wheel, fish plate etc. with sufficient lubricant as and when necessary as directed by the Engineer-in-charge including cost of all materials to site complete. 48 Each Set
7 5 Earthwork in re-excavation / silt clearance of drainage channels in all kinds of soil including sludge and slush but excluding slush mixed with industrial wastes, sewage, municipal garbage, carcasses, etc and depositing the same as per profile in proper place as directed by the Engineer-in-charge without causing hindrance to traffic and posing health hazard and making arrangement to maintain the site in workable condition including removal of polypacks, brickbats, stone ballasts & boulders, remnants of bullah & bamboo pins and all kinds of water hyacinth, solid / semi solid compact mass formed due to water hyacinth and burning them to ashes or removing outside Govt land where necessary and removal of thick & thorny jungles upto 30 cm girth including shoring and shuttering, if required, and including initial removal of sludge and slush etc by pan or bucket if required, and making arrangement for bailing out of any seepage water and removal of sand or soil blown from underneath, all complete.\n(b) By mechanical means using hydraulic excavators within an initial lead of 30 M and an initial lift of 3.0 M\n(Measurement : Pre-work and Post-work level section. Pre-work section to be taken after removal of water hyacinth and all other floating materials etc.) 5 345.82 Cum
8 6 Supplying, fitting, fixing Mild Steel flap shutter with Mild Steel plate of thickness as specified by the Engineer-in-charge and other necessary Mild Steel sections for sluice including fabricating the same (as per drawing and instruction given by the Engineer- in-charge) including painting with two coats of anticorrosive bituminous paint of approved make & brand over two coat of red lead primer and with necessary masonry work with all materials supply etc. complete at site. 6 438.45 Kg
9 7 Supplying, fitting & fixing in position rubber seal arrangements with musical note harmonic 'J' type for making water tight in both up and down stream of draw shutter as well as flap shutter including guide paths, additional M. S. flats, bolts and nuts for fixing the rubber seal in position including fabrication cost and carriage of all materials to site and complete as per direction of the Engineer-in- charge.\n(a) Flat Type Rubber seal\n(i) 59 mm x 6 mm 16.9 Metre
10 8 Supply at site including handling, stacking etc. of steel wire rope 16 mm dia. & 6/36 construction fibre main core conforming to IS : 2266/2002. 40 24 Metre
11 9 Supplying at site and fitting & fixing Mild Steel long nuts & bolts etc. complete as per the direction of the Engineer-in-charge. 41 11.36 Kg
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail