Public Works Department-PWD has published Providing Power Supply For A . Cs In New Institue Building Attached To Gmc Patiala. Submission Date for this Tender is 18-05-2021. Power Supply Unit Tenders in Patiala Punjab. Bidders can get complete Tender details and download the document.
| Name of Work: PROVIDING POWER SUPPLY FOR A.Cs IN NEW INSTITUE BUILDING ATTACHED TO GMC PATIALA | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:- Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), MS saddle clamp, PVC Circular junction Boxes (Four way 1½" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required:-:-\nMake :- PVC Pipe = Anchor, Polycab, Norpack, Diplast or equivalent PVC Copper Wires = Polycab, Bonton, Gemscab, KEI, Grandlay, Ultracab, RR kabel, , Havell's, or equivalent \nAccessories:-North-West (Nova), Havell's (Crab Tree), Hager(Insysta),Anchor (Roma Plus),Polycab(Levana),L&T(Entice),Goldmedal(Nixon) or equivalent \nWiring 16/20 amp. power plug control point | 1 | 140 | Each |
| 2 | 2 | PVC INSULATED FR COPPER CONDUCTOR CABLE:\nSupply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Make:-Polycab,L&T,Goldmedle, V-Guard, KEI, Grandlay, Ultracab, RR kabel, , Havell's, Greatwhite Securex,Rellison,or equivalent.\nOverall size 1.5sq.mm (Un-sheathed) | 2 | 2100 | Mtr. |
| 3 | 3 | Overall size 2.5sq.mm (Un-sheathed) | 3 | 4200 | Mtr. |
| 4 | 4 | Overall size 4sq.mm (Un-sheathed) | 4 | 600 | Mtr. |
| 5 | 5 | Overall size 6sq.mm (Un-sheathed) | 5 | 100 | Mtr. |
| 6 | 6 | Overall size 10sq.mm (Un-sheathed) | 6 | 2300 | Mtr. |
| 7 | 7 | Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Make:-Polycab,L&T,Goldmedle, V-Guard, KEI, Grandlay, Ultracab, RR kabel, , Havell's, Greatwhite Securex,Rellison,or equivalent.\nOverall size 1.5sq.mm (48/0.20mm), 3Core | 7 | 800 | Mtr. |
| 8 | 8 | Overall size 2.5sq.mm (50/0.25mm), 3Core | 8 | 3500 | Mtr. |
| 9 | 9 | XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE):\nSupply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-Make:-Polycab, Bonton, Gemscab, KEI, Grandlay, Ultracab, RR kabel, , Havell's, L&T, Universal Unistar,Ralison,or equivalent.\nOverall size 25sq.mm (3½ Core) Un-armoured (On-Surface) | 9 | 450 | mtr. |
| 10 | 10 | Overall size 150sq.mm (3½ Core) Un-armoured (On-Surface) | 10 | 200 | mtr. |
| 11 | 11 | Overall size 185sq.mm (3½ Core) Un-armoured (On-Surface) | 11 | 150 | mtr. |
| 12 | 12 | XLPE INSULATED UN-ARMOURED CABLES (LOOSE):\nSupply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-Make:-Polycab, Bonton, Gemscab, KEI, Grandlay, Ultracab, RR kabel, , Havell's, L&T, Universal Unistar,Ralison.or equivalent.\nOverall size 300sq.mm (3½ Core) Un-armoured (Loose) | 12 | 500 | mtr. |
| 13 | 13 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-\nMake:- Anchor, Polycab, Norpack, Diplast. or equivalent.\nHeavy gauge PVC conduit pipe 25mm dia. (On Surface) | 13 | 2200 | Mtr. |
| 14 | 14 | Heavy gauge PVC conduit pipe 32mm dia. (On Surface) | 14 | 20 | Mtr. |
| 15 | 15 | Heavy gauge PVC conduit pipe 40 mm dia. (On Surface) | 15 | 600 | Mtr. |
| 16 | 16 | Supply and erection of PVC flexible pipe complete without compression glands,locking arrangement, check-nuts as required:-\nPVC flexible pipe 32mm dia. | 16 | 200 | Mtr. |
| 17 | 17 | PVC flexible pipe 40mm dia. | 17 | 200 | Mtr. |
| 18 | 18 | Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe complete with as required:-\nPVC compression Socket gland 32mm dia. | 18 | 30 | Each |
| 19 | 19 | PVC compression Socket gland 40mm dia. | 19 | 25 | Each |
| 20 | 20 | COPPER EARTHING :-\n(Upto 14 metre in Length):-Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:-\n \nEarthing with 20mm x 3mm Copper Tape (upto 14Metre in Length) | 20 | 10 | Each |
| 21 | 21 | Additional Length 20mm x 3mm thick Copper Tape . | 21 | 700 | mtr |
| 22 | 22 | MINIATURE CIRCUIT BREAKERS:-\nSupply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- \nMake:-Legrand (DX3) , Schneider (Acti-9), L&T (Exora),Hager(NCN) or equivalent.\nMCB Four Pole 6-32amp. (10kA, Curve-C) | 22 | 30 | Each |
| 23 | 23 | MCB Triple Pole 40amp. (10kA, Curve-C) | 23 | 36 | Each |
| 24 | 24 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:\nSupply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-\nMake:-Legrand (Ekinoxe) ,Schneider (Acti-9), L&T (EXORA), HAGER(Novella),Havell's(Qve) or equivalent.\nSP&N Double Door Distribution Board 4 way each | 24 | 30 | Each |
| 25 | 25 | Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-Make:-Legrand (Ekinoxe) ,Schneider (Acti-9), L&T (EXORA), HAGER(Novella),Havell's(Qve) or equivalent.\nCable End Box for SPN 4Way | 25 | 30 | Each |
| 26 | 26 | Cable End Box for TPN Vertical 4/8/12Way | 26 | 6 | Each |
| 27 | 27 | Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-Make:-Legrand (Ekinoxe) ,Schneider (Acti-9), L&T (EXORA), HAGER(Novella),Havell's(Qve) or equivalent.\n\nTP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB 160amp) | 27 | 6 | Each |
| 28 | 28 | LT PANELS & MCCB's (MOULDED CASE CIRCUIT BREAKERS):-\nDesigning, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55).\nFabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. \nThe door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.\nPainting:- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work . \nBusbars:-The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. \nMetering:-The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. \nManufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.\nDetail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:\nMake:-CMKL,UPS INTERNATIONAL,POWER ASSOCIATES,KALYANI SWITCHGEAR,BHANDARI or equivalent\n\n\nLT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 8Nos. outgoing MCCB's 40amp. to 160amp. according to the requirement at site (Approx. size 1750 x 1750 x 400mm)m) | 28 | 1 | Each |
| 29 | 29 | MCCB's \nSupply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc\nMake: L&T (D-sine), Schneider (CVS), Hager(H3),Legrand ,Havell's (Loadline) or equivalent.\nMCCB Four Pole 63/80/100amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting | 29 | 8 | Each |
| 30 | 30 | MCCB Four Pole 400amp., 415volts, =36kA Microprocessor Based Adjustable Thermal and Magnetic Setting | 30 | 1 | Each |
| 31 | 31 | MCCB's (MOULDED CASE CIRCUIT BREAKER):\nSupply and erection of Moulded Case Circuit Breaker (Panel mounting Cubicle type) in the existing Cubical Panel (conforms to IEC:60947-II) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD General Specifications (Electrical Works) complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with sutiable size of Thimbles etc.\nMake: L&T (D-sine), Schneider (CVS), Hager(H3),Legrand, Havell's (Loadline) or equivalent.\nMCCB Four Pole 63/80/100amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting | 31 | 6 | Each |
| 32 | 32 | DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:\nSupply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including\nexcavation placing the pipe in position and back filling with excavated soil etc. of the required size:-\nMake :-TeleRex,Gemni,CPE,Dura Line or equivalent\nDouble walled corrugated (DWC) HDPE pipe 50/38 mm (outer/ inner dia.) | 32 | 100 | mtr |
| 33 | 33 | Double walled corrugated (DWC) HDPE pipe 120/103.5 mm (outer/ inner dia.) | 33 | 550 | mtr |
| 34 | 34 | Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-\nAluminium thimble cable Core size 25 -35sq.mm | 34 | 48 | Each |
| 35 | 35 | Aluminium thimble cable Core size 150sq.mm | 35 | 16 | Each |
| 36 | 36 | Aluminium thimble cable Core size 185sq.mm | 36 | 16 | Each |
| 37 | 37 | Aluminium thimble cable Core size 300sq.mm | 37 | 24 | Each |
| 38 | 38 | Supply and erection of heavy duty brass single compression gland for cable end termination duly complete with checknuts etc. including making necessary connections:-\nBrass Gland for Aluminium cable 2/3/3½/4 Core size 25-35sq.mm | 38 | 12 | Each |
| 39 | 39 | Brass Gland for Aluminium cable 3/3½/4 Core size 150sq.mm | 39 | 4 | Each |
| 40 | 40 | Brass Gland for Aluminium cable 3/3½/4 Core size 185sq.mm | 40 | 4 | Each |
| 41 | 41 | Brass Gland for Aluminium cable 3/3½/4 Core size 300sq.mm | 41 | 6 | Each |
| 42 | 42 | Designing, Supply, Erection, Testing & commissioning of double door outdoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 65).\nFabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. \nThe door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.\nPainting:- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment with PP(Polypropylene) paint shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work . \nBusbars:-The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports. \nMetering:-The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. \nManufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.\nDetail of capacities of MCCB's installed in the cubical panel Enclosure (including the cost of MCCB's,spreader terminal links, Extended rotary handles) as per following:-\nPanel builders Make:-CMKL,UPS INTERNATIONAL,POWER ASSOCIATES,KALYANI SWITCHGEAR,BHANDARI\nETE ELECTROGEARS,UNIX \n \nLT Panel complete with 1 No. Incomer MCCB Four Pole 400amp., 415volts, =36kA Microprocessor Based Adjustable Thermal and Magnetic Setting (confirm to IEC:60947-2) having Ics=100% Icu, 100% ) and 10 Nos. outgoing MCCBs Four Pole 63/80/100amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting (confirm to IEC:60947-2) having Ics=100% Icu, 100% ) (Approx. size 2025 x 1800 x 400mm) MCCB's Make: L&T (D-sine), Schneider (CVS), Hager(H3),Legrand , Havell's (Loadline) or equivalent. | 42 | 3 | Each |
| 43 | 43 | LT Panel complete with 1 No. Incomer MCCB Four Pole 630amp., 415volts, =36kA Microprocessor Based Adjustable Thermal and Magnetic Setting (confirm to IEC:60947-2) having Ics=100% Icu, 100% ) and 3 Nos. outgoing MCCBs Four Pole 400amp., 415volts, =36kA Microprocessor Based Adjustable Thermal and Magnetic Setting (confirm to IEC:60947-2) having Ics=100% Icu, 100% ) (Approx. size 2025 x 1800 x 400mm) MCCB's Make: L&T (D-sine), Schneider (CVS), Hager(H3),Legrand , Havell's (Loadline) or equivalent. | 43 | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
