}

8121/Sar-14/E8 Repair/Periodical Maint Of Lt Oh Lines , Us Cables , Servo Voltage Stabilizers And Allied Items At Af Stn Sarsawa Under Ge ( Af ) Sarsawa, AF STATION SARSAWA-Uttar Pradesh

Military Engineer Services-MES has published 8121/Sar-14/E8 Repair/Periodical Maint Of Lt Oh Lines , Us Cables , Servo Voltage Stabilizers And Allied Items At Af Stn Sarsawa Under Ge ( Af ) Sarsawa. Submission Date for this Tender is 29-05-2021. Voltage Stabiliser Tenders in AF STATION SARSAWA Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

27861100
8121/Sar-14/E8 Repair/Periodical Maint Of Lt Oh Lines , Us Cables , Servo Voltage Stabilizers And Allied Items At Af Stn Sarsawa Under Ge ( Af ) Sarsawa
National Competitive Bid
Indian
Uttar Pradesh
AF STATION SARSAWA
29-05-2021

Tender Details

8121/Sar-14/E8 Repair/Periodical Maint Of Lt Oh Lines , Us Cables , Servo Voltage Stabilizers And Allied Items At Af Stn Sarsawa Under Ge ( Af ) Sarsawa

Key Value

Document Fees
INR 500 /-
EMD
INR 79300.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: REPAIR/PERIODICAL MAINT OF LT OH LINES, UG CABLES, SERVO VOLTAGE STABILIZERS AND ALLIED ITEMS AT AF STN SARSAWA UNDER GE (AF) SARSAWA
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth for taking out/laying of U/G HT/LT cable and getting out the excavated soil including triming the sides complete all as directed. Item1 1285.88 Cum
2 2 Excavating in trenches, exc 1.5 m deep and getting out for each additional 1.5 m or part thereof in depth beyond the first 1.5 m as in soft/loose soil complete all as directed. Item2 5 Cum
3 3 Returning, filling in, incl spreading leveling, watering and well raming in layers not exc 25 centimetre thick in layer ins any type of soil complete all as specified and as directed Item3 661.991 Cum
4 4 Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed Engr-in-Charge. Item4 623.889 Cum
5 5 Material labour for common burnt clay bricks, sub class 'B' grade laid in trenches for protection of UG cables perpendicular to the direction of the cables complete all as specified and as directed by Engr-in-Charge Item5 55218 Nos
6 6 Material and labour for sand cushioning with layer of dry, clean & fine sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches and punned to 180 mm thick complete all as specified and as directed by Engr-in-Charge. Item6 514.35 Cum
7 7 Detecting of fault in cable HT/LT with fault locator equipment which is capable to supply as per cable of HT/LT (11 KV/430 volts) serviceable to cable with straight joint.\nNotes;- (a) The HT fault which is detected through cable fault locator will only paid under this item transportation charges demed to be included in the quoted rate. (b) Charge of cable fault locator & DG set including transportation charge demed to be included in the quoted rate. (c) Earth fault locator will be provided by the contractor for even single HT/LT fault and no delay on ths account will be acceptable otherwise penalty will be levid Rs 500/ per hour. (d) Straight through joint ,Labour charges , excavation and making joint deemed to be including in quoted rate. Item7 3 Each Job
8 8 Taking out brick (full/broken) from excavated trenches stacking the full brick for re-use at site and broken bricks to be thrown at low laying area Item8 2761 Each
9 9 Re-lying old bricks (full length) in the excavated trench retrieved from serial item No 8.00 here-in-before Item9 2761 Each
10 10 Taking Out HT/LT Cables of any size from excavated trench complete all as specified. Item10 6350 RM
11 11 Taking Out HT/LT Cables of any size from excavated trench and stacking the same for re-use at site if found repairable or deposited to MES store yard. Item11 318 RM
12 12 Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 10 Sqmm 4 core conforming to IS- 7098 (Part I) 1988 as in trenches and covered with brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape complete all as specified and as directed.\n Item12 1350 RM
13 13 Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 16 Sqmm 4 core conforming to IS- 7098 (Part I) 1988 as in trenches and covered with brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape complete all as specified and as directed.\n Item13 100 RM
14 14 Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 25 Sqmm 4 core conforming to IS- 7098 (Part I) 1988 as in trenches and covered with brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape complete all as specified and as directed.\n Item14 4000 RM
15 15 Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 50 Sqmm 4 core conforming to IS- 7098 (Part I) 1988 as in trenches and covered with brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down/out of old cable as existing on site complete all as specified and as directed.\n Item15 200 RM
16 16 Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 70 Sqmm 3.5 core conforming to IS- 7098 (Part I) 1988 as in trenches and covered with brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down/out of old cable as existing on site complete all as specified and as directed.\n Item16 200 RM
17 17 Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 95 Sqmm 3.5 core conforming to IS- 7098 (Part I) 1988 as in trenches and covered with brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape complete all as specified and as directed.\n Item17 100 RM
18 18 Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 120 Sqmm 3.5 core conforming to IS- 7098 (Part I) 1988 as in trenches and covered with brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape complete all as specified and as directed.\n Item18 200 RM
19 19 Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 185 Sqmm 3.5 core conforming to IS- 7098 (Part I) 1988 as in trenches and covered with brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape complete all as specified and as directed.\nNote for srl No 11 to 18 :- Excavation and earth work, GI pipe, brick and sand cushioning or cable protection cover shall be measured and paid separately.\n Item19 200 RM
20 20 M&L for Straight through / end joints heat shrinkable for XLPE/PVC insulated and sheathed aluminium conductor under ground cable 1100 Volts 3.5/ 4 core 06 sqmm to 16 sqmm and testing after jointing complete all as specified and as directed.\n Item20 8 Each
21 21 All as per item No. 20 here-in-before but for cable 3.5/4 core 25 sqmm to 50 sqmm Item21 6 Each
22 22 All as per item No. 20 here-in-before but for cable 3.5/4 core 70 sqmm to 120 Sqmm Item22 8 Each
23 23 All as per item No. 20 here-in-before but for cable 3.5/4 core 150 sqmm to 185 Sqmm Item23 6 Each
24 24 M&L for instant ready mix pothole repairing compound/mortar IRC approved maunfactured with a blend of bitumen , aggregate and high grade polymer to ensure immediate bonding with existing surface in 25 Kg bag. Item24 220 Each Bag
25 25 Labour for augering upto 100 mm bore for road crossing 3 mtr to 10 mtr not exceeding 1.5 mtr in depth for laying of electric cable and GI tubing in soft/loose soil complete all as specified. Item25 30 RM
26 26 Supply and laying 63/50 mm outer dia/ inner dia, double walled, corrugated DWC duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed. Item26 30 RM
27 27 Supply and laying 90/76 mm outer dia/ inner dia, double walled, corrugated DWC duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed. Item27 30 RM
28 28 Supply and laying 50mm outer dia, double walled, corrugated HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed.\n Item28 30 RM
29 29 Supply and laying 32mm outer dia, double walled, corrugated HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed.\n Item29 30 RM
30 30 M&L for PCC 1 : 4 : 8 type D2 Using 40 mm graded stone aggregate for foundation of poles complete all as specified and directed . Item30 5 Cum
31 31 M&L for PCC 1 : 3 : 6 type C2 Using 40 mm graded stone aggregate for foundation of stay/panal complete all as specified and directed . Item31 5 Cum
32 32 M&L for PCC 1 : 2 : 4 type B1 Using 20 mm graded stone aggregate for copping of poles/stay/panal complete all as specified and directed . Item32 5 Cum
33 33 Dismantling of old vintage steel tubular poles alongwith insulators and disposing off from site complete all as specified and directed. Item33 5 Each
34 34 Supply, transporting to site, errecting and fixing in position 9 metre long, Steel tubular swaged poles complete with cast iron/mild steel base plate, finial taper plug, bolts, nuts washers & screws as specified, type 410, SP-31 IS 2713 marked, drilling of necessary hole including painting to steel tubular poles, with two coats of aluminium paint over a coat of red oxide primer on exposed surface of poles and with black bituminous paint on portion of pole embedded in concrete and painting 3 Nos bands/strips with fluorescent PO red synthetic enamel paint 30 cms wide strip at 30 cms spacing from plinth block and numbering of poles complete all as specified and directed by Engineer-in-Charge. Item34 5 Each
35 35 M&L in replacement of stay assembly using GI stay rod 20 mm dia complete with accessories excluding stay wire 7/4 mm dia shown in electrical plate no 1 of SSR part 1 of 2009 (loop type insulators ,stay clamps excavation, stay clamp and concrete measure separately. Item35 2 Each set
36 36 M&L in replacement of stay assembly using GI stay rod 16 mm dia complete with accessories excluding stay wire 7/4 mm dia shown in electrical plate no 1 of SSR part 1 of 2009 (loop type insulators ,stay clamps excavation, stay clamp and concrete measure separately. Item36 2 Each set
37 37 M & L in replacement of galvanized stay wire of size 7/3.15 mm with new one complete all as specified & directed. Item37 0.3 Per qtl
38 38 Supply and fixing in replacement of pin type insulator vitreous, porcelain, white, brown or green with overall dimensions 90 X140 mm and clearance dia of hole 25.5mm after taking down/out insulator as existing at site complete all as specified and as directed. Item38 50 Each
39 39 S&F Loop type insulator, vitreous porcelain, white, brown or green small size, with overall dimensions 65 x 90mm, clearance of hole 16m complete all as specified and as directed. Item39 10 Each
40 40 S&F new aluminium conductor steel reinforced (ACSR) 6/1 x 2.59 mm (Weasel), straining properly on insulators and binding with aluminium tape / binding wire connectors, PG clamps, jumpers etc after taking down/out conductor as existing at site complete all as specified and as directed.Note : 3% for sag shall be added in straight measurements. Item40 2 Qtl
41 41 Restraining/ tightening of ACSR conductor of any size consisting of 03 to 07 Number conductor & GI earthwire of any size of LT overhead line on existing poles duly straining properly binding with extra aluminium binding wire to insullators all as directed by Engineer- in - Charge. Item41 50 Each span of poles
42 42 M&L for Cleaning & preparation of surface of the LT steel tubular poles with emmery paper filling of uneven surface with suitable filler and painting with two coat of aluminium paint including cross arms, brackets, hooks, junction box, stay clamps over a coat of red oxide primer and making blue & white strip 30cm wide strip (5 Nos) upto 1.5 m from PCC coping, above 1.5 m height in and including marking and numbering of poles complete all as specified and directed by Engineer- in-charge. Item42 550 Each Job
43 43 M&L for Cleaning & preparation of surface of the LT RCC poles and painting with two coat of aluminium paint to cross arms, brackets, hooks, junction box, stay clamps etc and with two coats of exterior cement base paint to pole and making blue & white strip 30cm wide strip (5 Nos) upto 1.5 m from PCC coping in and including marking and numbering of poles complete all as specified and directed by Engineer- in-charge. Item43 50 Each job
44 44 Labour only for pruning of tree branches from the site touching/embracing LT overhead lines in order to maintain a clearence of 2 mtr on either side of the conductors incl removing the tree branches from site to out side Air force stn complete alll as directed. Item44 100 Per tree
45 45 Supply only 25 mt long 2.5 cm wide and at least 0.125mm wall thickness PVC tape of good quality all as specified and directed. Make:- Steelgrip, Kinjal, Kalinga Item45 60 Roll
46 46 Supply only 25 mt long 2.5 cm wide and at least 0.200mm wall thickness HT tape with adhesive of good quality all as specified and directed. Make:- Steelgrip, Kinjal, Kalinga Item46 30 Roll
47 47 SERVO STABLIZER\nDisconnecting and taking out the voltage stabilizer of any description and of any make, dismantling / opening of the voltage stabilizer of following capacity, three phase, AC 415 Volts, for Maintenance and servicing mechanically and electrically,including draining out existing transformer oil, and cleaning, oiling /greasing, removing & replacement of defective / unserviceable parts with new parts, as required at site and as per manufacturer's instructions and checking electronic circuits to make it functional , reassembling the parts of voltage stabilizer after overhauling / servicing at position ensuring proper out put connecting to existing system and applying one coat of synthetic enameled paint (heat resistant type) by spray machine after preparation including writing MES No/ SM No in capital letters of suitable size on body of stabilizer and making voltage stabilizer perfectly operational and testing at site on existing connected load to the entire satisfaction of the Engineer-in-Charge complete all as specified and directed. (including in Note here in below)\nNotes :-(i) Replacement of unserviceable parts shall be measured and paid for separately under appropriate item of Sch ‘A’ as supply only but fixing charges of the parts replaced/repaired is deemed to be included in these item. (ii) Oil shall be drained out and collected in contractors own containers and reuse after heating and filtration through filtration plant to achieve the suitable dielectric strength/insulation value. Refilling, heating and filteration shall be included in the rate quoted by the contractor for above items. (iii) Fresh oil required for top up shall be measured as “supply only” but its heating and filling shall be included in the rate quoted by the contractor for above items. (iv) The quoted rate shall be deemed to include replacement of small/ minor parts i.e. washers,nut bolts, packing, screws,lamp etc.\n(a) 15 KVA to 40 KVA capacity\n Item47 3 Each job
48 48 -do- but 60 KVA to 100 KVA capacity , Item48 2 Each job
49 49 -do- but 150 KVA capacity , Item49 2 Each job
50 50 Supply only the following items/spare parts suitable for various capacity of Servo controlled Voltage Stabilizer dismantled/fixed under Sch `A` item No 47 to 49 here in above complete all as specified and directed.\nNote :- \n(i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 47 to 49 here in above.\n(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.\nServo motor 10 Kg-cm capacity. Item50 3 Each
51 51 -do- but Complete control wiring for each phase. Item51 3 Each
52 52 -do- but RC Net Work 10 Kg-cm (Resistor- Capacitor network) Item52 3 Each
53 53 -do- but Electronic PCB Control Card (Sensing Card) Item53 3 Each
54 54 -do- but BTR- 36 Item54 3 Each
55 55 -do- but Indicator lamp pilot type (RYB) Item55 6 Each
56 56 -do- but Selector switches suitable for volt meter, 3 way ON/OFF type. Item56 5 Each
57 57 -do- but VARIAC Coil 40 KVA / 50 KVA capacity per Phase Item57 3 Each
58 58 -do- but Volt meter 0- 500 volts Item58 3 Each
59 59 -do- but Six Pin connector Item59 3 Each
60 60 -do- but Carbon brush suitable for 25KVA to 75 KVA stabilizer Item60 6 Each
61 61 -do- but Complete Armour Item61 3 Each
62 62 -do- but Terminal Stud Item62 3 Each
63 63 -do- but Micro Switch Item63 3 Each
64 64 -do- but Lever Item64 3 Each
65 65 -do- but VARIAC Coil 25 KVA/ 30 KVA capacity per phase Item65 3 Each
66 66 -do- but VARIAC Coil 75 KVA / 100 KVA capacity per phase Item66 3 Each
67 67 -do- but Small Carbon bush for stablizer Item67 5 Each
68 68 -do- but RC Net work for Servo Stablizer Item68 3 Each
69 69 -do- but Transformer oil EHV confirming to IS-335 of 1983 of mineral oil grade 'B' having a high dielectric strength not less than 40 KV . Item69 100 Ltr
70 70 -do- but Push button switch for increase/decrease of voltage Item70 5 Each
71 71 -do- but Neon lamp for high & low voltage Item71 5 Each
72 72 -do- but Circuit plate Item72 5 Each
73 73 -do- but Ammeter of 0-50Amp 72 MM SQ Item73 5 Each
74 74 ISOLATION TRANSFORMER\nDisconnecting and taking out the isolation transformer of any description and of any make, dismantling / opening of the isolation transformer of following capacity, three phase, AC 415 Volts, for Maintenance and servicing mechanically and electrically,including draining out existing transformer oil, and cleaning, oiling /greasing, removing & replacement of defective / unserviceable parts with new parts, as required at site and manufacturer's instructions and checking electronic circuits to make it functional , reassembling the parts of isolation transformer after overhauling / servicing at position ensuring proper out put connecting to existing system and applying one coat of synthetic enameled paint (heat resistant type) by spray machine after preparation including writing MES No/ SM No in capital letters of suitable size on body of transformer and making isolation transformer perfectly operational and testing at site on existing connected load to the entire satisfaction of the Engineer-in-Charge complete all as specified and directed. (including mentioned in Note here in below) Notes :-(i) Replacement of unserviceable parts shall be measured and paid for separately under appropriate item of Sch ‘A’ as supply only but fixing charges of the parts replaced/repaired is deemed to be included in these item. (ii) Oil shall be drained out and collected in contractors own containers and reuse after heating and filtration through filtration plant to achieve the suitable dielectric strength/insulation value. Refilling, heating and filteration shall be included in the rate quoted by the contractor for above items. (iii) Fresh oil required for top up shall be measured as “supply only” but its heating and filling shall be included in the rate quoted by the contractor for above items. (iv) The quoted rate shall be deemed to include replacement of small/ minor parts i.e. washers,nut bolts, packing, screws,lamp etc. Item74 8 Each Job
75 75 Supply only the following items/spare parts suitable for various capacity of Isolation transformer dismantled/fixed under Sch `A` item No here in above complete all as specified and directed.\nNote :- \n(i) Fixing element of these items is included under the rates quoted by the contractor for Schedule `A' item No 74 here in above.\n(ii) Contractor shall have no claim on account of variation of quantities of any item or non execution of any item.\nTransformer oil EHV confirming to IS-335 of 1983 of mineral oil grade 'B' having a high dielectric strength not less than 40 KV\n Item75 60 Ltr
76 76 -do' but VARIAC Coil Item76 8 Each
77 77 -do' but Micro Switch Item77 5 Each
78 78 -do' but Terminal Stud Item78 5 Each
79 79 -do' but Six Pin connector Item79 5 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail