Dismantling Of Damaged / Rusted Existing Steel Supporting Structures Of Water / Slurry Pipeline From Near Thickener To Dump Pond / Old Pump House By Gas Cutting, Removing, Lowering, Weighing And Returning The Dismantled Items To Kiocls Stores Department, Including Cost Of All Consumables, Tools And Tackles, Gas Cutting Set, Etc. Complete All As Per The Details Given In Special Conditions And Instructions Of Engineer In Charge. Fabrication Of Temporary Supports Using Owner Issued New / Old Serviceable Steel Including Collection Of Owner Issue Items Either From Kiocls Stores Or Any Other Location Inside The Plant Premises, Shifting And Unloading At Work Spot, Erection Of The Same At Suitable Locations Below The Load Bearing Members With Proper Fitment And Alignment At Any Height ( App. 1012M ) , Dismantling / Removal And Return Of The Temporary Structures After Replacing The Damaged Members, Including Cost Of All Consumables, Providing All Tools &Tackles, Welding Transformer, Cutting Set, Etc. All As Per The Details Given In Special Conditions And Instructions Of Engineer In Charge Fabrication Of Any Type Of Steel Structures Required For Modification / Rectification / Replacement Of Existing Supporting Steel Structures Of Water / Slurry Pipeline From Near Thickener To Dump Pond / Old Pump House , Including Cleaning, Cutting, Trimming The Member And Erection Of The Fabricated Items With Proper Fitment At App Elevation Of 1012M, Alignment, Removal Of Welding Flux Using Using Owner Supplied New / Old Serviceable Steel Including Collecti On Of Owner Issue Items Either From Kiocls Stores Or Any Any Other Location Inside The Plant Premises , Shifting And Unloading At Work Spot, Including Cost Of All Consumables, Providing All Tools & Tackles, Gas Cutting Set, Welding Machine, Etc. Complete All As Per The Details Given In Special Conditions And Instructions Of Engineer In Charge Supply And Application Of Paints, Materials, Consumables, Scaffolding And Labour, Etc. Complete For Painting Of Pipeline Supporting Steel Structures By Application Of Paint Totaling To 300 Dft Within +5% Variation As Per The Painting Scheme Given In Annexure A, Including Surface Preparation By Manual Method Of Cleaning To Old / New Steel Structures At Any Height ( App. 1012M ) All As Per Technical Specifications, Special Conditions And Instructions Of Engineer In Charge. Note: Buffing Shall Be Done Wherever Wherever Possible As Instructed By Engineer In Charge Including Supply Of Buffing Machine. Material And Labour Complete For Supply And Application Of Paint Totaling To 200Dft Within +5% Variation As Per Painting Scheme Given In Annexure A, Including Surface Preparation By Manual Method Of Cleaning To Old / New Handrails Of Walkways And Platforms At Any Height ( App. 1012M ) All As Per The Technical Specifications , Special Conditions And Instructions Of Engineer In Charge. Supplying & Application Of One Coat Of Epoxy Mastic ( Primer Coat ) , One Coat On Intermediate Coat And One Coat Of Finish Paint Of Desired Colour, ( Total Of 3 Coats, Of 200Dft Total Thickness Within +5% Variation ) As Per Direction Of Engineer In Charge, Which Includes Water Washing, Mechanical / Manual Cleaning Of Rusted Surfaces Of Water / Slurry Pipe Lines At An App. Elevation Of 1012M Within The Galley, Including Cleaning The Surface From Grease, Dirt, Mill Scales Etc By Supplying And Using Wire Brushes Scrubbing With Bristle Brush, Emery And Sand Paper Etc Complete.
