Military Engineer Services-MES has published Repairs Reweaving Conversion Of Gi Charpoy Repairs And Painting Of All Types Of Steel Furniture Under Ge North Repairs Reweaving Conversion Of Gi Charpoy Repairs And Painting Of All Types Of Steel Furniture Under Ge North Bangalore . . Submission Date for this Tender is 24-05-2021. Painting Tenders in MEG AND BANASWADI Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-May-2021 | 8220Corrigendum1 | BOQ | 24-05-2021 |
| Name of Work : REPAIRS, REWEAVING, CONVERSION OF GI CHARPOY, REPAIRS AND PAINTING OF ALL TYPES OF STEEL FURNITURE UNDER GE (NORTH) BANGALORE. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | ALMIRAH LARGE AND MEDIUM STEEL (FD-67(M)/ 351/1031/ 1032) : \n(a) Removal of unserviceable locks and provision of new 65mm, 6 levers lock with triplicate keys of approved quality all as specified and as directed by Engineer-in-Charge | 250 | EACH | |
| 2 | 1.02 | (b) Removal of unserviceable handles and provision of new chromium plated handles 125mm long with suitable bolts and nuts as required all as specified and as directed by Engineer-in-Charge | 150 | EACH | |
| 3 | 1.03 | (c) Removal of unserviceable corner clips and provision of new corner clips made out of 3mm MS plate to shelf all as per drawing and duly applied with two coats synthetic enamel paint over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge | 800 | EACH | |
| 4 | 1.04 | (d) Removal of unserviceable three way locking device of almirah large with 8mm round MS rod and provision of new three way locking device with 8mm rod all as per drawing and duly applied with two coats synthetic enamel paint over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge | 25 | EACH | |
| 5 | 1.05 | (e) All as per Sl Item No 1.04 above but almirah medium steel. | 40 | EACH | |
| 6 | 1.06 | (f) Removal of unserviceable worn out legs of Almirah large with shelves steel and provison of new MS legs of size 435mm x 70mm x 100 mm made out of 1.0 mm thick MS sheet all as per drawing duly applied with two coats of synthetic enamel paint over a coat of red oxide primer and Legs fitted to almirah by continuous welding all as specified and as directed by Engineer-in-Charge. | 15 | PAIR | |
| 7 | 1.07 | (g) All as per item No 1.06 above but almirah medium steel | 25 | PAIR | |
| 8 | 1.08 | (h) Removal of unserviceable shelf of Almirah large steel with shelves and replacing the same with new shelf made out of 1.00mm thick MS sheet made to shape as per drawing of size 910mm long and 435 mm width duly applied two coats of olive green synthetic enamel paint over a coat of red oxide primer . The shelf should be fixed to Almirah large steel with suitable 3mm MS Clips all as specified and as directed by Engineer-in-Charge. | 25 | EACH | |
| 9 | 1.09 | (j) Removal of unserviceable shelf of Almirah medium steel with shelves and replacing the same with new shelf made out of 1.00mm thick MS sheet made to shape as per drawing of size 765mm long and 465 mm width duly applied two coats of olive green synthetic enamel paint over a coat of red oxide primer. The shelf should be fixed to Almirah medium steel with suitable 3mm MS clips all as specified and as directed by Engineer-in-Charge. | 35 | EACH | |
| 10 | 1.1 | (k) Continuous welding of legs, MS Cover and Corner clips of Almirah large and medium steel all as per drawing duly painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge | 150 | EACH | |
| 11 | 1.11 | LOCKER STEEL (FD-1029)\n(a) Removal of unserviceable handles and provision of new chromium plated handles 100mm long to be fixed as per drawing all as specified and as directed by Engineer-in-Charge | 250 | EACH | |
| 12 | 1.12 | (b) Removal of unserviceable hasp and staple and provision of new chromium plated hasp and staple 75 mm long to be fixed as per drawing all as specified and as directed by Engineer-in-Charge | 200 | EACH | |
| 13 | 1.13 | (c) Removal of unserviceable shelf replacing the same with new shelf made out of 1.00mm thick MS sheet made to shape as per drawing of size 530mm x 380 mm duly applied two coats of synthetic enamel paint over a coat of red oxide primer. The shelf, should be fixed to locker steel as per drawing all as specified and as directed by Engineer-in-Charge. | 25 | EACH | |
| 14 | 1.14 | (d) Removal of unserviceable shutter and replacing the same with new shutter made out of 1.00mm thick MS sheet made to shape as per drawing of size 936mm x 350 mm duly applied two coats of synthetic enamel paint over a coat of red oxide primer. The shutter should be fixed to locker steel all as per drawing all as specified and as directed by Engineer-in-Charge. | 20 | EACH | |
| 15 | 1.15 | (e) Removal of unserviceable worn out legs of locker steel and provison of new MS legs of size 580mm x 80mm x 150 mm made out of 1.0 mm thick MS sheet all as per drawing duly applied with two coats of synthetic enamel paint over a coat of red oxide primer and legs fitted to locker steel by continuous welding all as specified and as directed by Engineer-in-Charge. | 20 | PAIRS | |
| 16 | 1.16 | (f) Continuous welding of legs, MS Shutter, Shelves of locker steel all as per drawing duly painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge. | 150 | EACH | |
| 17 | 1.17 | TABLE OFFICE OFFICER STEEL/TABLE OFFICE CLERK STEEL (FD-84(M)/ 1003)\n(a) Replacement of old unserviceable locks of tables steel of sorts and S&F with new locks of 04 levers brass of approved make with triplicate keys complete all as shown on drawings & as directed by Engineer-in-Charge | 150 | EACH | |
| 18 | 1.18 | (b) Removal of unserviceable drawer of table office officer steel and provision of new drawer made of 1mm thick MS sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with MS lock, 4 levers of approved quality all as per drawing and as specified and as directed by Engineer-in-Charge. | 25 | EACH | |
| 19 | 1.19 | (c) Removing of old unserviceable drawer from table office clerk and supply and fix new drawer made out of 1.0mm thick CR sheet made to shape as per drawings duly painting with two coats of synthetic enamel paint over a coat of prime complete all as shown on drawings and as directed by Engineer-in-Charge. | 35 | EACH | |
| 20 | 1.2 | (d) Continuous welding 25mm square MS tube to the top base frame joints, leg joints and stiffener joints of table steel of sorts all as per drawing duly painting the affected portion with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge. | 150 | EACH | |
| 21 | 1.21 | Removal of old unserviceable rubber shoe and S&F new hard rubber shoe of superior quality as approved and all as shown on drawings for steel tables | 1000 | EACH | |
| 22 | 1.22 | STEEL TABLE (FD 165) \nRemoving the old unserviceable Table tops & S&F with new tops made out of 18/19 mm thick prelaminated particle board of approved make and shade duly providing 6mm thick TW beading complete all as specified in drawings and as directed for the following steel tables :-\n(a) Table dining OR | 40 | EACH | |
| 23 | 1.23 | FD-85 (M)\n(b) Table office officer steel | 20 | EACH | |
| 24 | 1.24 | FD-1003\n(c) Table office clerk steel of sorts | 80 | EACH | |
| 25 | 1.25 | FD-1009\n(d) Table 900x900x760mm steel | 30 | EACH | |
| 26 | 1.26 | FD-1007/ 1008\n(e) Table steel 900x600x760mm with/without drawers | 75 | EACH | |
| 27 | 1.27 | FD/E6/MAP/03\n(f) Table Computer | 35 | EACH | |
| 28 | 1.28 | FD-35/255/383\n(g) Teapoy Verandah | 35 | EACH | |
| 29 | 1.29 | (h) Removal of old unserviceable rubber shoe and S&F new hard rubber shoe of superior quality as approved and all as shown on drawings for steel tables | 1000 | EACH | |
| 30 | 1.3 | Chair Computer (FD/E6/MAP/01) \n(a) Removing the existing worn out cloth covering of seat and back of chair computer and replacing with new tapestry cloth/rexine and colour shall be as approved by GE complete all as specified and as directed. | 60 | EACH | |
| 31 | 1.31 | (b) Renewal of Hydraulic pressure systerm heavy duty 38mm dia. | 30 | EACH | |
| 32 | 1.32 | Sort of Chair revolving high back (TP)\n(a) Replacement of the existing of seat and back of any sort of chair revolving and replacing with new seat & back colour shall be as approved by GE complete all as specified and as directed. | 25 | EACH | |
| 33 | 1.33 | (b) Replacement of un serviceable Hydraulic pressure systerm heavy duty 38mm dia of chair revolving and replacing new hydraulic pressure system heavy duty and fit to the chair revolving, complete all as specified and as directed. | 20 | EACH | |
| 34 | 1.34 | (c) Renewal of pedestal Assembly (base with wheel), injection moulded in black, 30% glass filled nylon,10.5mm dia forged bright zinc plated MS castor pin, press fitted in to each prong for holding the castors of 600mm pitch centre dia and to fit the chair revolving and all as specified and as directed | 85 | EACH | |
| 35 | 1.35 | (d) Replacement of un serviceable arms rest of chair revolving and replacing the new arms rest of any size with suitable to fix the nut & bolts shall be as directed by Engineer-in-Charge | 35 | EACH | |
| 36 | 1.36 | Chair Writing (FD/E6/MAP/12)\n(a) Replacement of the existing seat and back of any sort of chair writing and replacing with new seat & back colour shall be as approved by GE complete all as specified and as directed. | 25 | EACH | |
| 37 | 1.37 | (b) Replacement of un serviceable arms rest of chair writing and replacing the new arms rest with suitable nut & bolts complete as directed by Engineer-in-Charge. | 25 | EACH | |
| 38 | 1.38 | Table Computer (FD/E6/MAP/03)\n(a) Removing the existing unserviceable telescopic channel with key board and replacing with new telescopic channel with key board tray of size 450x480mm and 18mm thick prelaminated particle board complete all as specified and as directed by Engr-in-Charge | 40 | EACH | |
| 39 | 1.39 | (b) Removal of old unserviceable Nylon buffers, supply and fix new nylon buffers of superior quality as approved and all as shown on drawings. | 80 | EACH | |
| 40 | 1.4 | CHAIR CBA STEEL WITH ARMS (FD/75(M)) \n(a) Dismantling carefully the packing of existing unserviceable seat frame of chair CB with arms of any discription in any position and supply and fixing new seat frame made out of 1st class teak wood, finished and canned with 1.8mm cane and boarded with 3.5mm plastic cane superior quality colour white in Godrej pattern complete all as specified and shown on drawing and as directed by Engineer-In-Charge. | 450 | EACH | |
| 41 | 1.41 | (b) All as per Sl Item No 1.40 above but replacement of back frame of chair steel CB with arms and S&F new back frame made out of 1st class teak wood finished cand with 1.8mm and boarded with 3.5mm plastic cane superior quality colour white in Godrej pattern complete all as specified and shown on drawing and as directed by Engineer-In-Charge. | 450 | EACH | |
| 42 | 1.42 | (c) Removal of unserviceable arms rest of chair CB tubular steel with arms and provision of new arms rest of size 50mm x 25mm x 46mm made out of 1st class hard wood (teak wood) including polishing new members with french polish to a glossy finish and fixed with suitable screws and washer all as per drawing, as specified and as directed by Engineer-In-Charge. | 150 | EACH | |
| 43 | 1.43 | (f) Removal of unserviceable PVC shoes/ caps of chair CB tubular with arms and chair CB tubular without arms and provision of new PVC shoes/ caps as per standard size all as per drawing and as specified and as directed by Engineer-In-Charge. | 1100 | EACH | |
| 44 | 1.44 | ALMIRAH LARGE STEEL GLAGED (FD- 104) \nRemoval of existing unserviceable 4 mm plain glass and supply and fix provision of new 4mm plain glass of approved quality all as specified and as directed by Engineer-in-Charge | 40 | EACH | |
| 45 | 1.45 | BOOK CASE STEEL (FD-1028)\n(a) Removal of unserviceable set of 4 locks with one key sets and provision of new 65mm 6 levers lock with triplicate keys set of 4 locks of approved quality all as specified and as directed by Engineer-in-Charge. | 20 | EACH | |
| 46 | 1.46 | (b) Removal of existing unserviceable 4 mm plain glass and supply and fix provision of new 4mm plain glass of approved quality all as specified and as directed by Engineer-in-Charge | 20 | EACH | |
| 47 | 1.47 | CHAIR CBA SPL WITH HAND REST (FD-260) :\n(a) Replacement of the existing seat of polypropylene co- polymere seat any sort of chair CBA SPL hand rest and replacing with new seat colour shall be as approved by GE complete all as specified and as directed. | 50 | EACH | |
| 48 | 1.48 | (b) Replacement of existing unserviceable 18/ 19 mm thick prelaminated particle board of size 465mm x 300 mm, supply and fix new 18/19 mm thick prelaminated particle board of approved make and shade, size 465mm x 300mm fixed with suitable screws duly providing 6mm thick TW beading complete all as specified in drawings and as directed | 45 | EACH | |
| 49 | 1.49 | (c) Continuous welding of legs, 20x20 mm iron pipe support to writing pad of chair CBA Spl With Hand rest all as per drawing duly painting the chair of steel portion with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge. | 35 | EACH | |
| 50 | 1.5 | (d) Removal of unserviceable PVC shoes / caps of chair CB CBA SPL with Hand rest and provision of new PVC shoes / caps as per standard size all as per drawing and as specified and as directed by Engineer-In-Charge. | 500 | EACH | |
| 51 | 1.51 | CHAIR CBB Steel W/O Arms (FD 75 (M)):\nDismantling carefully the packing of existing unserviceable seat frame of chair CB without arms of any discription in any position, supply and fixing new seat frame made out of 1st class teak wood with finished and canned with 1.8mm cane and boarded with 3.5mm plastic cane superior quality colour white in Godrej pattern complete all as specified, shown on drawing and as directed by Engineer-In-Charge. | 50 | EACH | |
| 52 | 1.52 | (b) All as per item No 38(a) above but replacement of back frame of chair steel CB with arms and S&F new back frame made out of 1st class teak wood finished canned with 1.8mm and boarded with 3.5mm plastic cane superior quality colour white in Godrej pattern complete all as specified and shown on drawing and as directed by Engineer-In-Charge | 50 | EACH | |
| 53 | 1.53 | PAINTING TO STEEL FURNITURE :\nPreparation of existing steel surfaces of internal and external surfaces including shelves by removing all dents filling with putty & spray painting with machine one coat of synthetic enamel paint OG/smoke grey (internal & extrenal) as indicated in drgs and as (in the furniture yard, unit lines & Officer Qtrs) directed by Engineer-in- charge for the following furniture :-\n(a) Almirah large steel with shelves/Almirah large steel 1/2 hg 1/2 shelves (FD-1031/ 1033) | 250 | EACH | |
| 54 | 1.54 | FD-1032\n(b) Almirah med steel with shelves | 450 | EACH | |
| 55 | 1.55 | FD-901(M) / FD-1028\n(c) Book case steel | 25 | EACH | |
| 56 | 1.56 | FD-69\n(d) Book shelf open large steel | 85 | EACH | |
| 57 | 1.57 | FD-75(M)\n(e) Chair CBA Steel | 450 | EACH | |
| 58 | 1.58 | FD-75(M)\n(f) Chair CBB Steel | 50 | EACH | |
| 59 | 1.59 | FD-1030\n(g) Almirah Map Steel 1/2 Sh x 1/2 Hang | 50 | EACH | |
| 60 | 1.6 | FD-1029\n(h) Locker steel | 650 | EACH | |
| 61 | 1.61 | FD-1003\n(j) Table office clerk steel | 150 | EACH | |
| 62 | 1.62 | FD-84 (M)\n(k) Table office officer steel | 40 | EACH | |
| 63 | 1.63 | FD-1009\n(l) Table 900x900x760mm steel | 20 | EACH | |
| 64 | 1.64 | FD-1008\n(m) Table 900x600x760mm with drawers steel | 75 | EACH | |
| 65 | 1.65 | FD-1007\n(n) Table 900x600x760mm without drawer steel | 100 | EACH | |
| 66 | 1.66 | FD-35/255/383\n(o) Teapoy Verandah | 45 | EACH | |
| 67 | 1.67 | CHARPOY GI PIPE (FD-220) : \n(a) 12mm thick commercial plywood (7 ply) duly ISI marked of size 2000mm x 900mm over the GI charpoy all the four corners of the plywood should be shaped such that it should rest on all long and short rails of the charpoy, the plywood shall be fixed to the charpoy with 10 Nos of 6mmx75mm long bolt and nuts duly counter shunk on top with suitable washers (nut, bolts & washers will be galvanised iron) by making holes 3 each on each long rails and 2 each on each short rails all as directed. The quoted rate shall also include for the following arrangement of fixing:-\n(i) Taking down of existing old unserviceble nylon newar from charpoy GI pipe.\n(ii) Provision of 3 No of the flat iron 40 x 5mm thick duly welded to long rails at 150mm from each short rails and 01 flat iron at centre of the long rail such that the flat iron, long rails should be at same level.\n(iii) two coats of synthetic enamel black paint over a coat of red oxide primer on flat iron and welded portions all as specified and as directed.\nMake of plywood : Greenply / Archid / Century / National\nSynthetic enamel paint :- Apcolite of Asian / Superlac of Shalimar / Luxol of Burger / Pentilite of Nerolac / Brolac of Jenson & Nicholson | 1150 | EACH | |
| 68 | 1.68 | (b) Supply only GI pipe 32mm dia medium grade for long rail 1880 mm length each and threading both ends as per drawing and as directed by Engineer-in-Charge. | 200 | EACH | |
| 69 | 1.69 | (c) Cutting the dismantled GI pipe 32mm dia long rail and modifying into one short rail and one leg. The short rail threading both ends as per drawing and legs including threading as per drawings, providing new MS sheet 3mm thick 50mm dia made to shape and continuously welded to the bottom and MS Sheet piece applied with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as directed. as directed by Engineer-in-Charge. | 200 | EACH | |
| 70 | 1.7 | (d) Cutting the dismantled GI pipe 32mm dia short rails and modifying into legs including threading as per drawings, providing new MS sheet 3mm thick 50mm dia made to shape and continuously welded to the bottom and MS Sheet piece applied with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as directed.\nNote : Each leg shall be measured separately. | 200 | EACH | |
| 71 | 1.71 | (e) Supply only GI elbow 32mm dia medium grade 3 way suitable for GI pipe charpoy conforming to relevant IS with ISI mark all as spcified and as directed by Engineer-in-Charge. | 650 | EACH | |
| 72 | 1.72 | (f) Supply only check nut 6mm dia suitable for 32mm dia GI pipe charpoy of weight not less than 100 gms each all as specified and as directed by Engineer-in-Charge. | 900 | EACH | |
| 73 | 1.73 | (g) Assembling the GI charpoy with serviceable members as retrieved vide Sl item No 1 here-in-before and new modified / supply only members as obtained vide Sl item No 2 to 6 here-in-before all as per drawing and as directed by Engineer-in-Charge. | 750 | EACH |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
