Irrigation And Public Health Department has published Construction Of Cow Shed At Trambla In Gp Longani In Tehsil Dharampur District Mandi Hp Construction Of Cattle Shed , Urine And Dunk Collection Chambers , Fodder Store And 2 Nos . Water Storage Tanks Of 10800 Ltrs Capacity Each Including Site Developme. Submission Date for this Tender is 12-05-2021. Shed Construction Tenders in Trambla Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of Cow Shed at Trambla in GP Longani in Tehsil Dharampur, Distt. Mandi (HP) (SH:- Construction of cattle shed, urine & dunk collection chambers, fodder store and 2 Nos. water storage tanks of 10800 ltrs. Capacity each including site development) (Deposit work) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in soil in Hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. | 43.85 | Cum | |
| 2 | 2 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work jumper work, blasting work in soft/hard rock, chiselling in soft/hard rock including wedging out upto all lift, stacking the excavated soil upto all lead clear from the edge of excavation and then returning the stacked soil in 15cm layers when requaired into plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth upto all lead and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. | 87.32 | Cum | |
| 3 | 3 | Providing and laying cement concrete 1:4:8 (1 cement :4 sand : 8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth upto all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge. | 515 | Cum | |
| 4 | 4 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm,so as to give a fair finish i/c centring shuttering,strutting & propping etc. with wooden battens & ballies,ht. of propping & centring below supporting floor to ceiling not exceeding 4.00 mts. & removal of the same for in situ-reinforced concrete & plain concrete work :- | |||
| 5 | 4.01 | Foundation, footing, basis of columns and the like mass concrete. as per the direction and to the entire satisfaction of Engineer-in-charge . | 229.07 | Sqmt | |
| 6 | 4.02 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. | 480.75 | Sqmt | |
| 7 | 5 | Providing and laying cement concrete 1 : 1½ : 3 ( 1 cement : 1½ : sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinfocement for reinforced concrete work in : | |||
| 8 | 5.01 | Foundation footings bases of columns and the like; and mass concreteas per direction and to the entire satisfaction of Engineer-in-Charge. | 18.41 | Cum | |
| 9 | 6 | Providing Tor steel reinforcement for RCC work I/c bending ,binding and placing in position complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. | 2749.34 | Kg. | |
| 10 | 7 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in foundation & plinth in cement mortar 1:4 as per direction and to the entire satisfaction of Engineer-in-charge \n | 69.89 | Cum | |
| 11 | 8 | Brick work using common burnt clay 2nd class building bricks in supper structure above plinth level upto floor two level in cement mortar 1:4 (1 cement :4 sand) including curing complete as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. | 36.43 | Cum | |
| 12 | 9 | Steel work welded in build up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead painting grating, framed guard bars ladders, railing brackedts and similar works as per direction of Engineer-in-Charge upto all lead and lift. | 209.03 | Qtl. | |
| 13 | 10 | Steel work welded in built up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead painting grating, framed guard bars ladders, railing brackedts and similar works in trusses and trussed purlins in buildings as per direction of Engineer-in-Charge upto all lead and lift. | 184.97 | Qtl. | |
| 14 | 11 | Providing & fixing 0.60 mm Thick pre-painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns primer coating i/c fixing with prepainted iron J or L-hooks bolts & nuts 6 mm dia with prepainted limpet and rubber washer complete with all accessories as required as per direction and to the entire satisfaciton of Engineer-in-charge. | 1101.44 | Sqmt | |
| 15 | 12 | Providing & fixing ridges or hips 60 cm overall with 0.60 mm Thick pre-painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns primer coating i/c fixing with prepainted iron J or L-hooks bolts & nuts 6 mm dia with prepainted G.I. limpet and bitumen washer complete with all accessories as required as per direction and to the entire satisfaciton of Engineer-in-charge. | 105.5 | Rmt | |
| 16 | 13 | Applying two coat of Birla white wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose material & other foreign matter as per direction and to the entire satisfaciton of Engineer-in-charge upto all lead and lift. | 180.36 | Sqmt. | |
| 17 | 14 | Providing and laying cement concrete 1:2:4 (1 Cement : 2 Sand :4 graded stone aggregate 20mm nominal size) and curing complete and reinforcement for reinforced concrete work excluding cost of form work in foundation and plinth and the like and mass concrete as per direction and to the entire satisfaction of Engineer-in-Charge. | 77.47 | Cum | |
| 18 | 15 | Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring shutter having below 3.5 mtr as per direction and to the entire satisfaction of Engineer-in-Charge. | 63 | Sqmt. | |
| 19 | 16 | 15 mm thick cement plaster in single coat on rough side of brick /stone /concrete walls for interior plastering upto floor two level I/c arrises, internal rounded angles, chambers and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar1:3(1 cement :3 sand) | 381.92 | Sqmt | |
| 20 | 17 | Painting two coats (excluding priming coat) on new concrete masonry/plaster surfaces with readymix paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matters sand papering as required with paint other than white. | 180.36 | Sqm | |
| 21 | 18 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) including under layer for plinth protection of 75 mm thick (unconsolidated) bed dry brick/stone aggregated 40 mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground as per direction and to the entire satisfaction of Engineer-in-Charge. | 119.02 | Sqm | |
| 22 | 19 | Providing and laying uPVC pipe 110mm dia PN-4 (ASTRAL Make) i/c necessary fitting conforming to IS 4985-2000 as per specifications and to the entire satisfaction of Engineer-in-Charge. | 150 | Rmt. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
