}

Supply And Installation Of Equipment To Establish Seoc At Ksndmc, BENGALURU-Karnataka

Karnataka State Natural Disaster Monitoring Centre has published Supply And Installation Of Equipment To Establish Seoc At Ksndmc. Submission Date for this Tender is 27-05-2021. Coats and Jackets Tenders in BENGALURU Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

27769012
Supply And Installation Of Equipment To Establish Seoc At Ksndmc
Open Tender
Indian
Karnataka
BENGALURU
27-05-2021

Tender Details

Supply And Installation Of Equipment To Establish Seoc At Ksndmc 1. 24 U Rack Or Better, 2. Amplifier And Dsp, 3. Cable Cubbies, 4. Desktop Computer, 5. Extra For Fabrication Supply And Fixing Of Stand Fabricated Using Slotted Angle/L Angle Of Size 6Mm X 50Mm For Mounting Out Door/Indoor A.C. Unit./ Batteries. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 6. Extra For Groove Cutting In Brick Wall Or Cc Floor To The Suitable Depth For Concealing Of Conduit Or Gi Pipe And Plastering, Finishing Upto Wall Surface Complete. Upto 50Mm Conduit In Brick Wall Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 7. Fixing A Ceiling / Wall Mounting Fan Of All Capacities And All Types, With Necessary Clamps And S Hook Made Out Of 15Mm Dia Ms Rod, With 5 Amps. Ceiling Rose Of Approved Quality With Necessary Length Of 23 / 0.0076 Inch Pvc Insulated Twin Twisted Wire Of Approved Quality, Mounted On A Suitable Size Wooden Board And Wired.(Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 8. Fixing A Ceiling / Wall Mounting Fan Of All Capacities And All Types, With Necessary Clamps And S Hook Made Out Of 15Mm Dia Ms Rod, With 5 Amps. Ceiling Rose Of Approved Quality With Necessary Length Of 23 / 0.0076 Inch Pvc Insulated Twin Twisted Wire Of Approved Quality, Mounted On A Suitable Size Wooden Board And Wired.Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 9. Fixing All Types And All Capacities Of Fluorescent Or False Ceiling Or Spot Light Or Cfl Or Led Fittings Indoor On The Wall Or Ceiling Or Rafters Or Girders Using 23/0.0076 Inch Twin Twisted Pvc Insulated Wires, Required Nos Of Round Blocks And Clamps. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 10. Gooseneck Mics, 11. Groove Cutting In Walls Supplying Heavy Gauge Pvc Conduit Pipe With Suitable Size Bends, Metal Junction Boxes Adhesive Paste Etc., By Groove Cutting In The Wall And Fixing By Bracing U Or J Hooks And Cement Plastering Up To The Wall Surface And Run With 18 Swg Gi Fish Wire Run Throughout The Conduit Wherever Necessary. 19/20Mm Dia 2Mm Thickcomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 12. Groove Cutting In Walls Supplying Heavy Gauge Pvc Conduit Pipe With Suitable Size Bends, Metal Junction Boxes Adhesive Paste Etc., By Groove Cutting In The Wall And Fixing By Bracing U Or J Hooks And Cement Plastering Up To The Wall Surface And Run With 18 Swg Gi Fish Wire Run Throughout The Conduit Wherever Necessary. 25Mm Dia 2Mm Thick Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 13. Groove Cutting In Walls Supplying Heavy Gauge Pvc Conduit Pipe With Suitable Size Bends, Metal Junction Boxes Adhesive Paste Etc., By Groove Cutting In The Wall And Fixing By Bracing U Or J Hooks And Cement Plastering Up To The Wall Surface And Run With 18 Swg Gi Fish Wire Run Throughout The Conduit Wherever Necessary. 32Mm Dia 2.5Mm Thick Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 14. Installation Charges For Split Type Air Conditioner, 15. Open Conduit System Supplying Heavy Gauge Pvc Conduit Pipe Confirming To Is 2509 With Suitable Size Bends, Junction Boxes, Adhesive Paste Etc., And Fixing Using Inverted Wood Plugs In Case Of Rcc Ceiling And Rcc Wall / Stone Structure Or Rawl Plugs In Case Of Brick Walls And Cement Plastering The Damaged Portion Using Heavy Gauge Saddles At An Interval Of 700Mm Using Nf Screws. 19 Or 20Mm Dia 2Mm Thick. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 16. Open Conduit System Supplying Heavy Gauge Pvc Conduit Pipe Confirming To Is 2509 With Suitable Size Bends, Junction Boxes, Adhesive Paste Etc., And Fixing Using Inverted Wood Plugs In Case Of Rcc Ceiling And Rcc Wall / Stone Structure Or Rawl Plugs In Case Of Brick Walls And Cement Plastering The Damaged Portion Using Heavy Gauge Saddles At An Interval Of 700Mm Using Nf Screws. 25Mm Dia 2Mm Thick. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 17. Open Conduit System Supplying Heavy Gauge Pvc Conduit Pipe Confirming To Is 2509 With Suitable Size Bends, Junction Boxes, Adhesive Paste Etc., And Fixing Using Inverted Wood Plugs In Case Of Rcc Ceiling And Rcc Wall / Stone Structure Or Rawl Plugs In Case Of Brick Walls And Cement Plastering The Damaged Portion Using Heavy Gauge Saddles At An Interval Of 700Mm Using Nf Screws. 32 Mm Dia 2.5Mm Thick. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 18. Providing And Laying Of Modular Wooden Polished Flooring Of 12Mm Thick, High Density Timber Of Approved Colour And Design With End Trims, Transition, Profiles, Beading, 15Mm Thick Felt, And 20 Micron Polyester Film With 4Mm Thick Foam Underlay Etc., Including Cost Of All Materials, Mortar, Labour, Curing Etc., Complete As Per Specification. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 19. Providing & Fixing Of Mineral Fibre Acoustical Suspended Ceiling System In Module Size Of 600 X 600 X 16Mm With Exposed Grid. Tiles Having Humidity Resistance (Rh) Of 99%, Nrc 0.5, Light Reflectance ;,83%, Thermal Conductivity K = 0.052-0.057 W/M K, Colour White, Fire Performance Uk Class 0 I Class 1 (Bs 476 Pt- 6 &7)With Sand Texture Finished Dune And Suitable For Green Building Application With Recycled Content Of 39%. The Tile Shall Be Laid On 24 Mm Wide T - Section Flanges Colour White Having Rotary Stitching On All T Sections I.E. The Main Runner, 1200 Mm & 600 Mm Cross Tees With A Web Height Of 38Mm And A Load Carrying Capacity Of 15Kgs/Sqm & Pull Out Strength Of Minimum 100 Kgs. The T Sections Should Have A Galvanizing Of 90 Grams Per Sqm And Need To Be Installed With Suspension System Of Approved Make. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 20. Providing And Fixing Straight Workstation Consisting Of Back To Back Unit Made Out Of 75 Mm Thick Ms Crca Powder Coated, Tile Based System For Main Sprine, Separator 25 Mm Thick Plpb - Bsl Wooden Separator For Return Spine,Top Tile Finish 8 Mm Thick Mdf Covered With Fabric Of Approved Colour And One Writing Board (600 Mm W) And One Soft Board (600 Mmw) Per Workstation, Bottom Tile Finish 9 Mm Thick Laminate Tile Of Approved Colour, Raceway- One Middle Raceway (600Mm W) Below Table Top Per Workstation And Continous Raceway At The Skirting Level, Wire Manager- Abs Plastic Grommet One Number Per Table,Table Top - 25 Mm Thick Plpb With Straight Table Top Hardware Ms Powder Coated Corner Bkt,Cantilever Bkt,Separator Hook On Bkt, L Bkt And Table Joint Plate., As Per Specifications, Drawings And As Directed By Engineer In Charge. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work. D) Size : 1200 Mmw X 540Mm D X 1200 Mm Ht (Non Sharing Work Station With Post Formed Table Top, Single Unit), 21. Providing And Fixing Veneer Paneling, Over The 50Mm X 35Mm Sal Wood Frame Work At Spacing Not Exceeding 60Dmm C/C Fixed To The Wall And Top Covered Out Of 4Mm Thick Approved Quality Veneer, Fixed Over 12Mm Thick Ply Of Approved Brand, Termite And Water Resistant, Finished With Melamine Polish, Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 22. Supply Of Round/Square Recess/Surface Mounted Rolling Type Led Down Light With .W Gu 10 Led Lamp Rib Fabricated From Die Cast Aluminium With White Powder Coated Prewired To Mains Connector & Has Swiveling Unit Of Aluminium Die Cast Eye Ball & Led Lamp Position Retained By Circular Wire Spring, With Life Of 25000 Burning Hours & 70% Lumen Maintenance With Cri > 80. Power Input: 220-240V @ 50/60Hz & Power Factor >0.9 Along With Ce Approved. 2 Years Warranty Against Any Manufacturing Defect Working Under Standard Electrical Condition Led Square Or Round Down Light 15-18Wcomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 23. Supplying & Fixing Of Switch Mounting Rack With Power Manager & Cable Manager. 12 U With 450Mm Depth Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 24. Supplying & Fixing Of Switch Mounting Rack With Power Manager & Cable Manager. Supplying & Fixing Of Fan Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 25. Supplying & Fixing Of Switch Mounting Rack With Power Manager & Cable Manager. Supplying & Fixing Of Power Strip Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 26. Supplying & Fixing - Flexible Led Strip Light .W Power Consumption In 5Mtrs Length Cct 6500 Degree K, Cri> 70%. Efficacy >80 Lumen Per Watt, Life> 25000 Burning Hours And Compliance To Is 10322/Iec 60598, Lm 79 & Lm 80. The Led Are Driven By Hf Electronic Driver Non Integrated, With Pf > 0.95, Power Loss Should < 5% Of Lamp Wattage., Short Circuit & Open Circuit Protection To Be Integrated In The Circuit, Thd Less Than 20%, Life As Per Lm 79. The Operating Input Voltage Should Be Between 130 To 275 Volts. Bis Approved With 2 Years Warranty Against Any Manufacturing Defect Working Under Standard Electrical Condition. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 27. Supplying & Fixing Of Cat6 Patch Cable1 Mtr Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 28. Supplying & Fixing Of Cat6 Patch Cable2 Mtr Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 29. Supplying & Fixing Of Patch Panel For Lan Cabling 48 Port 10/100 Patch Panel Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 30. Supplying Pvc Or Gi Flexible Conduit Pipe Fixing On Surface Over Inverted Tapered Wooden Plugs Or Phill Plugs Or Rawl Plugs And Clamped Using Heavy Gauge Saddles At An Interval Of 300Mm Using Nf Screws And On Either End Of Thepi Pe Terminated Completely 32Mm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 31. Supplying Pvc/Gi Flexible Conduit Pipe Fixing On Surface Over Inverted Tapered Wooden Plugs Or Phill Plugs Or Rawl Plugs And Clamped Using Heavy Gauge Saddles At An Interval Of 300Mm Using Nf Screws And On Either End Of The Pipe Terminated Completely 25Mm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 32. Supplying And Drawing Pvc Flexible One Pair Telephone Unarmoured Tinned Copper Cable.Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 33. Supplying And Drawing Pvc Flexible One Pair Telephone Unarmoured Tinned Copper Cable.Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 34. Supplying And Drawing Pvc Insulated Gas Injected Physical Foam Jelly Flooded Co-Axial Tv Cable.Rg-6.Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 35. Supplying And Fixing Miniature Circuit Breakers On Existing Mcb Distribution Boards Using Necessary Fixing Materials And C Type Curve, Indicator On/Off, Energy Cross-3 With Short Circuit Breaking Capacity Of 10K And Complete Wiring As Required Confirming To Iec 60898. 6-32 Amps Sp. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 36. Supplying And Fixing Of Mdf Krone Junction Box With Krone Module Or Telephone Cable Termination. 50 Pair Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 37. Supplying And Fixing Of Pvc Casing And Capping On The Wall Or Ceiling Using Necessary Materials Like Bends, Screws At An Interval Of 300Mm Etc. As Required.50 Mm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 38. Supplying And Fixing Of Modular Switch & Connected Accessories On Existing Modular Switch Plate As Per Is 3854 And Is 1293. 16Amps One Way Switch Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 39. Supplying And Fixing Of Modular Switch & Connected Accessories On Existing Modular Switch Plate As Per Is 3854 And Is 1293. 32Amps Dp Switch Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 40. Supplying And Fixing Of Modular Switch & Connected Accessories On Existing Modular Switch Plate As Per Is 3854 And Is 1293. 6Amps 3Way Socket. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 41. Supplying And Fixing Of Modular Switch & Connected Accessories On Existing Modular Switch Plate As Per Is 3854 And Is 1293. 6Amps One Way. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 42. Supplying And Fixing Of Modular Switch & Connected Accessories On Existing Modular Switch Plate As Per Is 3854 And Is 1293. Rj45/ I.O. Outlet Cat-6. (Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 43. Supplying And Fixing Of Modular Switch & Connected Accessories On Existing Modular Switch Plate As Per Is 3854 And Is 1293. Stepped Fan Regulator. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 44. Supplying And Fixing Of Modular Switch & Connected Accessories On Existing Modular Switch Plate As Per Is 3854 And Is 1293. Tv/Tel Phone Socket. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 45. Supplying And Fixing Of Modular Switch & Connected Accessories On Existing Modular Switch Plate As Per Is 3854 And Is 1293.6/16Amps Universal Socket. Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 46. Supplying And Fixing Regular Mcb Distribution Boards On Wall / Wood Board / Flush Mounting Using Required Clamps, Bolts, Nuts Etc., With Provision For Fixing Suitable Type Capacity Mcbs Single Phase / 3 Phase / Single Door With Powder Coated Painting. Made Out Of 14 Swg Ms Enclosure.Ii - Double Door 12 Way Spn Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 47. Supplying And Fixing Superior Quality Modular Switch Mounting Polycarbonate Plate With Necessary Supporting Back Plate With Required Nos. Of Machine Screws, Bolts Nuts Etc., Complete On The Existing Metal/Pvc Box. 1 To 3 Module Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 48. Supplying And Fixing Superior Quality Modular Switch Mounting Polycarbonate Plate With Necessary Supporting Back Plate With Required Nos. Of Machine Screws, Bolts Nuts Etc., Complete On The Existing Metal/Pvc Box. 12 Module Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 49. Supplying And Fixing Superior Quality Modular Switch Mounting Polycarbonate Plate With Necessary Supporting Back Plate With Required Nos. Of Machine Screws, Bolts Nuts Etc., Complete On The Existing Metal/Pvc Box. 16-18 Module Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 50. Supplying And Fixing Superior Quality Modular Switch Mounting Polycarbonate Plate With Necessary Supporting Back Plate With Required Nos. Of Machine Screws, Bolts Nuts Etc., Complete On The Existing Metal/Pvc Box. 4 Module Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 51. Supplying And Fixing Superior Quality Modular Switch Mounting Polycarbonate Plate With Necessary Supporting Back Plate With Required Nos. Of Machine Screws, Bolts Nuts Etc., Complete On The Existing Metal/Pvc Box. 6 Module Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 52. Supplying And Fixing Superior Quality Modular Switch Mounting Polycarbonate Plate With Necessary Supporting Back Plate With Required Nos. Of Machine Screws, Bolts Nuts Etc., Complete On The Existing Metal/Pvc Box. 8 Module Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 53. Supplying And Flush Mounting Powder Coated / Galvanized Metal Box Suitable For Mounting Modular Switch Plates. The Box Should Be Firmly Flush Mounted After Due Groove Cutting In Brick/Stone/C.C Wall 10-12Waycomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 54. Supplying And Flush Mounting Powder Coated / Galvanized Metal Box Suitable For Mounting Modular Switch Plates. The Box Should Be Firmly Flush Mounted After Due Groove Cutting In Brick/Stone/C.C Wall 16-18Waycomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 55. Supplying And Flush Mounting Powder Coated / Galvanized Metal Box Suitable For Mounting Modular Switch Plates. The Box Should Be Firmly Flush Mounted After Due Groove Cutting In Brick/Stone/C.C Wall 4-5Waycomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 56. Supplying And Flush Mounting Powder Coated / Galvanized Metal Box Suitable For Mounting Modular Switch Plates. The Box Should Be Firmly Flush Mounted After Due Groove Cutting In Brick/Stone/C.C Wall 6Waycomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 57. Supplying And Flush Mounting Powder Coated / Galvanized Metal Box Suitable For Mounting Modular Switch Plates. The Box Should Be Firmly Flush Mounted After Due Groove Cutting In Brick/Stone/C.C Wall 8Waycomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 58. Supplying And Flush Mounting Powder Coated / Galvanized Metal Box Suitable For Mounting Modular Switch Plates. The Box Should Be Firmly Flush Mounted After Due Groove Cutting In Brick/Stone/C.C Wall1-3Waycomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 59. Supplying And Installation Of Insulated Refrigerant Copper Tubing Of 5/8`` And 3/8`` With Polythene Foam Insulation 3 Core 80 Stand Copper Wiring Between Indoor And Outdoor Unit. Leak Testing Oil And Gas Charging For Additional Piping Length Of Tube. Split Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 60. Supplying And Running Gi/Copper Conductor For Grounding And (Along With Other Wires In Conduit System Of Wiring) Using Necessary Suitable Size Clamps, Nails, Guttas/Spacers Etc. 12 Swg. Copper Wire Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 61. Supplying And Wiring Adopting Loop System In Existing Pvc Conduit /Casing Capping Casing Capping Using 2X1.5Sqmm (Phase & Neutral) & 1X1.0 Sqmm (Earth Wire) Frls Multi Strand Pvc Insulated Copper Wire (Confirming To Is-694: And Latest Amendments) Without Control Switch Shall Be Fixed On The Existing Plastic Sheet/ Gang Box, The Other End Of The Wires Shall Be Terminated With Sufficient Loose Length In A Wood/Pvc Round Block. Complete For Each Outlet. Long Point Above 6Mtr. Upto 10M From Tapping Point To Out Let Via Switch Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 62. Supplying And Wiring Adopting Loop System In Existing Pvc Conduit /Casing Capping Casing Capping Using 2X1.5Sqmm (Phase & Neutral) & 1X1.0 Sqmm (Earth Wire) Frls Multi Strand Pvc Insulated Copper Wire (Confirming To Is-694: And Latest Amendments) Without Control Switch Shall Be Fixed On The Existing Plastic Sheet/ Gang Box, The Other End Of The Wires Shall Be Terminated With Sufficient Loose Length In A Wood/Pvc Round Block. Complete For Each Outlet. Medium Point Above 3M. Upto 6M From Tapping Point To Out Let Via Switch Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 63. Supplying And Wiring Adopting Loop System In Existing Pvc Conduit /Casing Capping Casing Capping Using 2X1.5Sqmm (Phase & Neutral) & 1X1.0 Sqmm (Earth Wire) Frls Multi Strand Pvc Insulated Copper Wire (Confirming To Is-694: And Latest Amendments) Without Control Switch Shall Be Fixed On The Existing Plastic Sheet/ Gang Box, The Other End Of The Wires Shall Be Terminated With Sufficient Loose Length In A Wood/Pvc Round Block. Complete For Each Outlet. Short Point Upto 3Mtr From Tapping Point To Out Let Via Switch Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 64. Supplying And Wiring Adopting Loop System In Existing Pvc Conduit /Casing Capping Casing Capping Using 2X1.5Sqmm (Phase & Neutral) & 1X1.0 Sqmm (Earth Wire) Frls Multi Strand Pvc Insulated Copper Wire (Confirming To Is-694: And Latest Amendments) Without Control Switch Shall Be Fixed On The Existing Plastic Sheet/ Gang Box, The Other End Of The Wires Shall Be Terminated With Sufficient Loose Length In A Wood/Pvc Round Block. Complete For Each Outlet. Three Outlet In A Row, Above 6Mtr Upto 10Mtr From Tapping Point To Out Let Via Switches Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 65. Supplying And Wiring Adopting Loop System In Existing Pvc Conduit /Casing Capping Casing Capping Using 2X1.5Sqmm (Phase & Neutral) & 1X1.0 Sqmm (Earth Wire) Frls Multi Strand Pvc Insulated Copper Wire (Confirming To Is-694: And Latest Amendments) Without Control Switch Shall Be Fixed On The Existing Plastic Sheet/ Gang Box, The Other End Of The Wires Shall Be Terminated With Sufficient Loose Length In A Wood/Pvc Round Block. Complete For Each Outlet. Two Outlet In A Row, Above 3Mtr Upto 6Mtr From Tapping Point To Out Let Via Switches Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 66. Supplying Fixing Of Network Switches 48 Port Gigabyte (Manageable)Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 67. Supplying Of ......Feet - Pvc Batten With Integrated Led Tube.....W With High Quality Diffuser With Life Of 25000 Burning Hours & 70% Lumen Maintenance With Cri > 80. Power Input: 220-240V @ 50/60Hz & Power Factor >0.9 Along With Ce Approved. 2 Years Warranty Against Any Manufacturing Defect Working Under Standard Electrical Condition. Led Light Fighting 2X 4 - 20 /22 W Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 68. Supplying Of .Feet - Pvc Batten With Integrated Led Tube.....W With High Quality Diffuser With Life Of 25000 Burning Hours & 70% Lumen Maintenance With Cri > 80. Power Input: 220-240V @ 50/60Hz & Power Factor >0.9 Along With Ce Approved. 2 Years Warranty Against Any Manufacturing Defect Working Under Standard Electrical Condition. Led Light Fighting 1 X 2 - 9/10Wcomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 69. Supplying Of .Feet - Pvc Batten With Integrated Led Tube.....W With High Quality Diffuser With Life Of 25000 Burning Hours & 70% Lumen Maintenance With Cri > 80. Power Input: 220-240V @ 50/60Hz & Power Factor >0.9 Along With Ce Approved. 2 Years Warranty Against Any Manufacturing Defect Working Under Standard Electrical Condition. Led Light Fighting 1 X 4 - 20/22Wcomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 70. Supplying Of 2Tr Invertor Type Split Air Conditioners, 71. Supplying Of Ceiling Fan With Capacitor, 72. Supplying Of Recess Mounting Non Integral Type .. Led .. W Luminaire Comprising Of Pressure Decast/Extruded Aluminium Housing, With Spring Loaded Fase Ceiling Clamps, Power Leds With Cct 6500 Degree K, Cri> 70%. Efficacy >100 Lumen Per Watt, 120Degree Beam Spread, Life> 25000 Burning Hours And Compliance To Is 10322/Iec 60598, Lm 79 & Lm 80. The Lamp Compartment Is Enclosed With Anti Glare Opal Diffuser Which Enhances The Lighting Level. Leds Are Driven By Hf Electronic Driver Integrated In A Separate Control Gear Assembly., With Pf > 0.95, Power Loss Should < 5% Of Lamp Wattage., Short Circuit & Open Circuit Protection To Be Integrated In The Circuit, , Thd Less Than 20%, Life As Per Lm 79. The Operating Input Voltage Should Be Between 130 To 275 Volts. Bis Approved And Tested By Nabl/ Cpri Accredited Laboratory With 2 Years Warranty Against Any Manufacturing Defect Working Under Standard Electrical Condition Led Modular Down Light 2X2 / 1 X 4 42-55 Watts Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 73. Supplying Tinned Copper Lugs And Crimping And Wiring To Terminal Point For Wire Of The Following Sizes. 1.5 Sqmm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 74. Supplying Tinned Copper Lugs And Crimping And Wiring To Terminal Point For Wire Of The Following Sizes. 10Sqmm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 75. Supplying Tinned Copper Lugs And Crimping And Wiring To Terminal Point For Wire Of The Following Sizes. 2.5Sqmm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 76. Supplying Tinned Copper Lugs And Crimping And Wiring To Terminal Point For Wire Of The Following Sizes. 4Sqmm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 77. Supplying Tinned Copper Lugs And Crimping And Wiring To Terminal Point For Wire Of The Following Sizes. 6Sqmm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 78. Supplying, Fixing And Wiring Residual Current Circuit Breaker (Rccb) 240/450V Up To 300Ma Sensitivity On Existing Wood/Panel Board 32 Amps 2 Pole (Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 79. Video Conference Equipment, 80. Video Wall, 81. Video Wall Controller With Software, 82. Wall Mount Or Ceiling Speakers, 83. Wifi Access Point, 84. Wiring For Lighting/Power Circuit Using One Of Frls Pvc Insulated 1100V Grade, Multistrand Copper Wire With Low Conductor Resistance Single Core In Open Or Concealed System Of Wiring With Specified Is-694:Confirming To Latest Amendments. 4 Sqmmcomplete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 85. Wiring For Lighting/Power Circuit Using One Of Frls Pvc Insulated 1100V Grade, Multistrand Copper Wire With Low Conductor Resistance Single Core In Open Or Concealed System Of Wiring With Specified Is-694:Confirming To Latest Amendments. 6 Sqmm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 86. Wiring For Lighting/Power Circuit Using One Of Frls Pvc Insulated 1100V Grade, Multistrand Copper Wire With Low Conductor Resistance Single Core In Open Or Concealed System Of Wiring With Specified Is-694:Confirming To Latest Amendments. 1 Sqmm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 87. Wiring For Lighting/Power Circuit Using One Of Frls Pvc Insulated 1100V Grade, Multistrand Copper Wire With Low Conductor Resistance Single Core In Open Or Concealed System Of Wiring With Specified Is-694:Confirming To Latest Amendments. 1.5 Sqmm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 88. Wiring For Lighting/Power Circuit Using One Of Frls Pvc Insulated 1100V Grade, Multistrand Copper Wire With Low Conductor Resistance Single Core In Open Or Concealed System Of Wiring With Specified Is-694:Confirming To Latest Amendments. 10 Sqmm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 89. Wiring For Lighting/Power Circuit Using One Of Frls Pvc Insulated 1100V Grade, Multistrand Copper Wire With Low Conductor Resistance Single Core In Open Or Concealed System Of Wiring With Specified Is-694:Confirming To Latest Amendments. 2.5 Sqmm Complete With All Lead & Lifts Complete As Per Specification And Directions Of The Engineer In Charge Of The Work., 90. Work Station Computer,

Key Value

Document Fees
INR 2330 /-
EMD
INR 250000.0 /-
Tender Value
INR 92.81 Lakhs /-

BOQ Items

Sl No Item Code Item Name Item Description Unit Quantity
1
AV09 24 U Rack or better
No
1
2
AV08 Amplifier and DSP
No
1
3
AV09 Cable Cubbies
No
4
4
AV04 Desktop Computer
No
6
5
AVEL58 Extra for Fabrication supply and fixing of Stand fabricated using slotted angle/L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit./ Batteries. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
7
6
AVEL11 Extra for Groove cutting in brick wall OR CC floor to the suitable depth for concealing of Conduit OR GI pipe and plastering, finishing upto wall surface complete. upto 50mm conduit in brick wall complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
30
7
AVEL79 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and \S\ hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.(complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
32
8
AVEL78 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and \S\ hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
4
9
AVEL77 Fixing all types and all capacities of fluorescent or false ceiling or spot light or CFL or LED fittings indoor on the wall or ceiling or rafters or girders using 23/0.0076 inch twin twisted PVC insulated wires, required Nos of round blocks and clamps. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
32
10
AV07 Gooseneck Mics
No
8
11
AVEL08 Groove cutting in walls Supplying heavy gauge PVC Conduit Pipe with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20mm dia 2mm thickcomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
22
12
AVEL09 Groove cutting in walls Supplying heavy gauge PVC Conduit Pipe with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25mm dia 2mm thick complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
40
13
AVEL10 Groove cutting in walls Supplying heavy gauge PVC Conduit Pipe with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 32mm dia 2.5mm thick complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
5
14
AVEL56 Installation charges for split type air conditioner
No
7
15
AVEL05 Open Conduit System Supplying heavy gauge PVC conduit pipe confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19 or 20mm dia 2mm thick. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
108
16
AVEL06 Open Conduit System Supplying heavy gauge PVC conduit pipe confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25mm dia 2mm thick. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
212
17
AVEL07 Open Conduit System Supplying heavy gauge PVC conduit pipe confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 32 mm dia 2.5mm thick. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
30
18
AVEL2 Providing and laying of Modular wooden polished flooring of 12mm thick, high density timber of approved colour and design with end trims, transition, profiles, beading, 15mm thick felt, and 20 micron polyester film with 4mm thick foam underlay etc., including cost of all materials, mortar, labour, curing etc., complete as per specification. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Sqm
107.4
19
AVEL1 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 16mm with Exposed Grid. Tiles having Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ;,83%, Thermal Conductivity k = 0.052-0.057 w/m K, Colour White, Fire Performance UK Class 0 I Class 1 (BS 476 pt- 6 &7)with sand texture finished Dune and suitable for Green Building application with Recycled content of 39%. The tile shall be laid on 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 15Kgs/sqm & pull out strength of minimum 100 Kgs. The T Sections should have a Galvanizing of 90 grams per Sqm and need to be installed with Suspension system of approved make. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Sqm
107.4
20
AVEL04 Providing and fixing STRAIGHT WORKSTATION consisting of back to back unit made out of 75 mm thick MS CRCA powder coated, tile based system for main sprine, Separator 25 mm thick PLPB - BSL wooden separator for return spine,Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mmw) per workstation, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway- one middle raceway (600mm W) below table top per workstation and continous raceway at the skirting level, Wire manager- ABS plastic grommet one number per table,Table top - 25 mm thick PLPB with straight table top Hardware MS powder coated corner bkt,cantilever bkt,separator hook on bkt, L bkt and Table joint plate., as per specifications, drawings and as directed by Engineer in charge. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work. D) Size : 1200 mmW x 540mm D x 1200 mm ht (Non Sharing work station with Post formed table top, Single unit)
Each
16
21
AVEL03 Providing and fixing Veneer paneling, over the 50mm x 35mm sal wood frame work at spacing not exceeding 60Dmm c/c fixed to the wall and top covered out of 4mm thick approved quality Veneer, fixed over 12mm thick ply of approved brand, termite and water resistant, finished with melamine polish, complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Sqm
162.6
22
AVEL75 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18Wcomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
11
23
AVEL63 Supplying & Fixing of switch mounting rack with power manager & Cable manager. 12 U with 450mm depth complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Each
1
24
AVEL65 Supplying & Fixing of switch mounting rack with power manager & Cable manager. Supplying & Fixing of Fan complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Each
1
25
AVEL64 Supplying & Fixing of switch mounting rack with power manager & Cable manager. Supplying & Fixing of Power strip complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Each
1
26
AVEL71 Supplying & fixing - flexible LED Strip Light .W Power consumption in 5mtrs length CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per watt, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver non integrated, with PF > 0.95, power loss should < 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved with 2 years Warranty against any manufacturing defect working under standard electrical condition. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
40
27
AVEL67 Supplying & fixing of Cat6 Patch Cable1 mtr complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Each
60
28
AVEL68 Supplying & fixing of Cat6 Patch Cable2 mtr complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Each
60
29
AVEL69 Supplying & fixing of Patch Panel for LAN cabling 48 Port 10/100 patch panel complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Each
1
30
AVEL14 Supplying PVC or GI flexible conduit pipe fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of thepi pe terminated completely 32mm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
5
31
AVEL13 Supplying PVC/GI flexible conduit pipe fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely 25mm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
75
32
AVEL60 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
340
33
AVEL61 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
620
34
AVEL62 Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6.complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
200
35
AVEL46 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and \C\ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps SP. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
32
36
AVEL70 Supplying and fixing of MDF krone junction box with KRONE Module or Telephone cable termination. 50 pair complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Each
1
37
AVEL12 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm etc. as required.50 mm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
60
38
AVEL41 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
50
39
AVEL42 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
2
40
AVEL39 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
123
41
AVEL38 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
59
42
AVEL45 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/ I.O. outlet Cat-6. (complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
160
43
AVEL40 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
4
44
AVEL44 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Tel phone socket. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
24
45
AVEL43 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socket. complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
10
46
AVEL47 Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB\s single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.II - Double Door 12 way SPN complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
4
47
AVEL32 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
72
48
AVEL36 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 12 Module complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
1
49
AVEL37 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 16-18 Module complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
1
50
AVEL33 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
1
51
AVEL34 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
1
52
AVEL35 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
43
53
AVEL30 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Waycomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
1
54
AVEL31 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16-18Waycomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
1
55
AVEL27 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Waycomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
1
56
AVEL28 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Waycomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
1
57
AVEL29 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Waycomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
43
58
AVEL26 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall1-3Waycomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
72
59
AVEL57 Supplying and installation of insulated refrigerant copper tubing of 5/8`` and 3/8`` with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit. Leak testing oil and gas charging for additional piping length of tube. Split complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
70
60
AVEL49 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 12 SWG. Copper Wire complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
50
61
AVEL17 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr. upto 10M from tapping point to out let via switch complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Point
1
62
AVEL16 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3M. upto 6M from tapping point to out let via switch complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Point
2
63
AVEL15 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Point
1
64
AVEL19 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mtr upto 10Mtr from tapping point to out let via switches complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Point
2
65
AVEL18 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Point
13
66
AVEL66 Supplying fixing of Network Switches 48 Port Gigabyte (manageable)complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Each
1
67
AVEL74 Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 2x 4\ - 20 /22 w complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
2
68
AVEL72 Supplying of .feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x 2\ - 9/10wcomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
2
69
AVEL73 Supplying of .feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x 4\ - 20/22wcomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
3
70
AVEL55 Supplying of 2TR Invertor type split Air conditioners
No
4
71
AVEL59 Supplying of Ceiling Fan with Capacitor
No
4
72
AVEL76 Supplying of recess mounting non integral type .. LED .. W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per watt, 120degree beam spread, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should < 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 2\x2\ / 1\ x 4\ 42-55 watts complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
14
73
AVEL50 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 1.5 sqmm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
3
74
AVEL54 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 10sqmm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
24
75
AVEL51 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5sqmm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
53
76
AVEL52 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 4sqmm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
90
77
AVEL53 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 6sqmm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
12
78
AVEL48 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/panel board 32 Amps 2 pole (complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
No
4
79
AV06 Video Conference equipment
No
1
80
AV01 Video wall
No
16
81
AV02 Video wall Controller with software
No
1
82
AV08 Wall mount or ceiling speakers
No
2
83
AV05 Wifi Access point
No
1
84
AVEL23 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmmcomplete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
644
85
AVEL24 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
80
86
AVEL20 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1 sqmm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
100
87
AVEL21 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
256
88
AVEL25 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 10 sqmm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
320
89
AVEL22 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm complete with all lead & lifts complete as per specification and directions of the Engineer in charge of the work.
Mtr
434
90
AV03 Work station Computer
No
1
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail