}

Repair Recanning And Painting To Steel Furniture At Bso Yard Danapur Under Ge Danapur Cantt, DANAPUR-Bihar

Military Engineer Services-MES has published Repair Recanning And Painting To Steel Furniture At Bso Yard Danapur Under Ge Danapur Cantt. Submission Date for this Tender is 22-05-2021. Painting Tenders in DANAPUR Bihar. Bidders can get complete Tender details and download the document.




Tender Notice

27751842
Corrigendum : Repair Recanning And Painting To Steel Furniture At Bso Yard Danapur Under Ge Danapur Cantt
Open Tender
Indian
Bihar
DANAPUR
22-05-2021

Tender Details

Repair Recanning And Painting To Steel Furniture At Bso Yard Danapur Under Ge Danapur Cantt

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 15-May-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 22-05-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 60000.0 /-
Tender Value
INR 29.94 Lakhs /-

BOQ Items

Name of Work : REPAIR / RECANNING AND PAINTING TO STEEL FURNITURE AT BSO YARD DANAPUR UNDER GE DANAPUR CANTT
Sl. No. Item Description Item Code / Make Quantity Units
1 1 M&L for preparation of old painted iron & steel surfaces (externally and internally including shelves etc) by scraping & rubbing down with sand paper, removing dents and scratches, if any and filing the same with paste filler and applying a one coat primer and two coat of olive green/silver synthetic enamel paint to the following furniture items complete all as per drg and directed.
2 1.01 Almirah steel. large with shelves (FD-67(M), 351, 1031) 280 EACH
3 1.02 Almirah Steel Medium with shelves (FD-67(M), 243, 350, 1032) 505 EACH
4 1.03 Chair steel tubular with arms (FD-75(M)) 42 EACH
5 1.04 Chair tubular steel without arms (FD-75(M)) 155 EACH
6 1.05 Rack Steel adjustable enclosed type 6 tier (FD-106(M), 1038) 35 EACH
7 1.06 Table office officers steel (FD-1003) 23 EACH
8 1.07 Table clerk steel (FD-1004) 32 EACH
9 1.08 Locker steel (FD-357, 1029) 505 EACH
10 1.09 Book Case glazed Steel (FD-90(M), 1028) 20 EACH
11 1.1 Rack steel adj open type 1905x914.40x609mm with six shelves (FD-129) 6 EACH
12 1.11 Book self open small (FD-69) 8 EACH
13 1.12 Book self open Large (FD-69) 15 EACH
14 1.13 Rack steel adjuystable closed on three side (FD-1057) 12 EACH
15 1.14 MNF Set Iron 500 EACH
16 1.15 Chair steel with hand board (FD-E6/MAP/05) 80 EACH
17 1.16 Table 3x2 steel with drawer/without drawer (FD-1007, 1008) 75 EACH
18 1.17 Tepoy varandah 45 EACH
19 1.18 Shoe Rack Steel (FD-E6/MAP/02) 205 EACH
20 2 ALMIRAH STEEL LARGE FD-67 (M)/351/1031
21 2.01 Taking out unserviceable broken leg from almirah steel large and supply & fixing new leg made out of plain back iron sheet1mm thick of suitable size and welded including applying two coats of spray paints with olive green synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing. 30 EACH
22 2.02 Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej/link (Including duplicate keys of stainless steel of size 65mm to Almirah large steel complete all as shown on drawing. 185 EACH
23 2.03 Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as shown on drawing. 185 EACH
24 2.04 Supply and fixing steel almirah cover (for locking system) made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing. 80 EACH
25 2.05 Dismantling carefully and taking out old unserviciable/damaged shelf of almirah large steel and supply & fixed of new shelf made out of MS sheet 1mm thick band to required shape & size and welding the same properly in position including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing. 60 EACH
26 2.06 Dismantling carefully and taking out unserviciable/damaged door single leaf of Almirah large steel and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and applining two coats of spray paints internally and externally with synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing. 12 EACH
27 3 ALMIRAH STEEL MEDIUM FD-67 (M)/243/350/1032
28 3.01 Taking out unserviceable broken leg from almirah steel medium and supply & fixing new leg made out of plain back iron sheet1mm thick of suitable size and welded including applining two coats of spray paints with olive green synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing. 20 EACH
29 3.02 Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej/link (Including duplicate keys of stainless steel of size 65mm to almirah steel medium complete all as shown on drawing. 200 EACH
30 3.03 Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as shown on drawing. 200 EACH
31 3.04 Supply and fixing steel almirah cover (for locking system) made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing. 105 EACH
32 3.05 Dismantling carefully and taking out old unserviciable/damaged shelf of almirah steel medium and supply & fixed of new shelf made out of MS sheet 1mm thick band to required shape & size and welding the same properly in position including applining two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing. 40 EACH
33 3.06 Dismantling carefully and taking out unserviciable/damaged door single leaf of almirah steel medium and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and applining two coats of spray paints internally and externally with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing. 18 EACH
34 4 CHAIR VERANDAH STEEL (FD-19/256)
35 4.01 Removing of unserviciable/torn nylon newar/ plastic cane/PVC Shoes from existing chair and supply & recanning with new plastic cane 4mm wide 1/2 round of approved quality all as directed irrespective of what is shown on drawing including painting the frame with one coat of white synthetic enamel paint before recanning including S & F PVC shoes to the legs comlete all as directed and rest all as per drawing. 380 EACH
36 5 CHAIR TUBULAR STEEL WITHOUT ARM (FD-75M)
37 5.01 Removing of existing old unserviceable seat and supply & fixing new seat made out of teak wood frame duly canned, Godrej patten and applying two coats of high glossy French Polish fixed with new screws complete and rest all as per drawing. 20 EACH
38 5.02 ~ditto~ All as per item No.5.01 above but old unserviceable back complete. 20 EACH
39 5.03 S&F MS cleats of size 25 mmx 50mmx3 mm thick, welded to frame of seat of chair duly painted with one coat of OG synthetic enamel paint over a coat of red oxide primer complete and as shown on drawing. 30 EACH
40 6 CHAIR TUBULAR STEEL WITH ARM (FD-75M)
41 6.01 Removing of existing old unserviceable seat and supply & fixing new seat made out of teak wood frame duly canned as per Godrej patten and applying two coats of high glossy French Polish and fixed with new screws complete all as shown on drawing . 20 EACH
42 6.02 ~ditto~ All as per item No.6.01 above but old unserviceable back complete. 20 EACH
43 6.03 Removing of existing broken unserviceable arm and supply & fixing new arm of 2nd class hard wood of suitable size and applying two coats of high glossy French Police fixed with new screws complete all as shown on drawing. 30 EACH
44 6.04 S&F MS cleats of size 25 mmx 50mmx3mm thick, welded to frame of seat of chair duly painted with one coat of OG synthetic enamel paint over a coat of red oxide primer complete all as shown on drawing. 30 EACH
45 7 TABLE (3' X 2') WITH DRAWER & WITHOUT DRAWER (FD-1007/1008)
46 7.01 Removing of old/broken table top and supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm x 18 mm size fixed with fevicol and panel pins and duly given a coat of high glossy french polish and applying one coat of OG synthetic enamel paint on the steel frame complete and rest all as per drawing. 45 EACH
47 7.02 Removing of old broken drawer from existing table 3’x2’ and providing new steel drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer as directed and shown on drawing.. 12 EACH
48 7.03 Removing the existing unserviceable lock from the drawer of table and supply & fixing new brass lock, with duplicate keys complete. 25 EACH
49 8 TABLE OFFICE CLERK STEEL (FD-84 (M)/1004)
50 8.012 Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete as per drg. 20 EACH
51 8.02 Removing of old broken drawer from existing table office clerk steel and providing new steel drawer made out of 1mm thick PBI sheet duly painted one coat with synthetic enemal paint over one coat primer as directed by Engr-in-Charge and rest all as per drawing. 12 EACH
52 8.03 Removing the existing unserviceable lock from the drawer of table and supply & fixing new brass lock with duplicate keys complete and rest all as per drawing. 18 EACH
53 9 TEAPOY VERANDAH (FD-255)
54 9.01 Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade-I , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete and rest all as per drawing. 40 EACH
55 9.02 Preparation of old steel surface of teapoy verandah and welding loose joints, if any including de-rusting the surface and painting with one coat of white synthetic enameled paint as directed by Engineer-in-Charge. 45 EACH
56 10 TABLE COMPUTER
57 10.01 Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete as per drg. 25 EACH
58 10.02 Removing of old broken drawer from existing table computer and providing new 18mm thick pre laminated particle board drawer should 75mm deep on telescopic channel as directed by Engr-in-Charge and rest all as per drawing. 30 EACH
59 10.03 Removing of old broken key board from existing table computer and providing new 18mm thick pre laminated particle board key board tray on telescopic channel as directed by Engr-in-Charge and rest all as per drawing.18mm thick prelaminated particle board . 20 EACH
60 10.04 Preparation of old steel surface of table computer and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enameled paint as directed by Engineer-in-Charge. 30 EACH
61 10.05 All steel and iron surfaces exposed to view when placed in position shall be given two coats of automotive paint over a coat of primer after preparation of surfaces to obtain smooth painted surfaces. 30 EACH
62 11 LOCKER STEEL(FD-257/1029)
63 11.01 Taking out unserviceable broken leg from Locker steel and supply & fixing new leg made out of plain black iron sheet 1mm thick of suitable size including applying a coat of red oxide primer and one coat of synthetic enamel paint after preparation of surface complete and rest all as per drawing. 20 EACH
64 11.02 Dismantling/Taking down old unserviceable hasp and staple without damaging the adjacent parts of locker and supply & fixing new mild steel chromium plated hasp and staple 100mm size complete all as specified and rest all as per drawing. 80 EACH
65 11.03 Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new mild steel chromium plated handles 100 mm long of approved quality complete all as shown on drawing. 45 EACH
66 11.04 Taking out old unserviceable broken hinges of shutters without damaging the adjacent parts of locker and supply & fixing new MS hinges of 75 mm long of approved quality complete and rest all as per drawing. 60 EACH
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail