}

Certain Repair/Replacement Of Damaged Door And Windows And Repair To Flooring , Plastering , Plinth Protection At Admin Area Cpe , Itarsi Under Ge ( I ) ( P ) Fy Jabalpur, Itarsi-Madhya Pradesh

Military Engineer Services-MES has published Certain Repair/Replacement Of Damaged Door And Windows And Repair To Flooring , Plastering , Plinth Protection At Admin Area Cpe , Itarsi Under Ge ( I ) ( P ) Fy Jabalpur. Submission Date for this Tender is 24-05-2021. Door Tenders in Itarsi Madhya Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

27751410
Corrigendum : Certain Repair/Replacement Of Damaged Door And Windows And Repair To Flooring , Plastering , Plinth Protection At Admin Area Cpe , Itarsi Under Ge ( I ) ( P ) Fy Jabalpur
Open Tender
Indian
Madhya Pradesh
Itarsi
24-05-2021

Tender Details

Certain Repair/Replacement Of Damaged Door And Windows And Repair To Flooring , Plastering , Plinth Protection At Admin Area Cpe , Itarsi Under Ge ( I ) ( P ) Fy Jabalpur

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 17-May-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 24-05-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 45600.0 /-
Tender Value
INR 22.80 Lakhs /-

BOQ Items

Name of Work : CERTAIN REPAIR/REPLACEMENT OF DAMAGED DOOR, WINDOWS AND REPAIR TO FLOORING, PLASTERING, PLINTH PROTECTION AT ADMIN AREA CPE, ITARSI UNDER GE (I) (P) FY JABALPUR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Taking down chowkhat with shutter (without taking off shutters from frame including grill & guard bars) size of shutter exceeding 1.5 sqm each and not exceeding 4.0sqm removing from site complete all as specified and directed. 30 Each
2 2 Taking down chowkhat with shutter (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each and removing from site complete all as specified and directed. 95 Each
3 3 Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm and removing from site complete all as specified and directed. 10 Each
4 4 S&F pressed steel frame for doors with one or more rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate and one shop coat of red oxide primer etc complete all as specified and directed. 50 RM
5 5 S&F pressed steel frame for doors with one or more rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc one shop coat of red oxide primer complete all as specified and directed. 40 RM
6 6 M&L pressed steel frames for cup board chowkhat of size 60x40mm with one or more rebates incl necessary fixing lug, hold fasts one shop coat of red oxide primer etc ssed complete all as specified and directed. 72 RM
7 7 S&F 18 mm thick prelaminated MDF Board exterior grade fixed to timber/steel frame work with screwsas in cubboard shutter including edge bending of similar colour complete all as specified and directed. 36 Sqm
8 8 S & F factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 44 Sqm
9 9 S & F 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbersof shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. 20 Sq m
10 10 S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloure PVC sheet reinforced with M S square tube, suppling & fixing in opening as per specifiaction & drawing complete all as specified and directed. 140 RM
11 11 S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. 38 Sqm
12 12 M& L for Box type steel window double (glazed & gauged) emade of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame comprise glazed skelton shutter door frame of ERW tube P-section size 50 mm x 20 mm with two Nos openable leaf cnsisting of two Nos of sash bar of T-sec 20 mm x 3 mm welded to frame with one No vertcale mullion of ERW of ERW box type T-section size of 60 mm x25 mm FI 2 mm thick welded / screwed to frame for fixing of wire guage/glass including fixture and fitting like as handle, tower bolt stopper, cleat, pintal hinges, holdfast primer etc, complete all as specified and directed. (Window will be measured single side only) (Security Grills will be measured and paid separately)\n(i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrte surface\n(ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long \n(iii) PCC block for embedding lugs 60 Sqm
13 13 All as per Item No. 12 here-in-before but as in ventilator complete all as specified and directed. 10 Sqm
14 14 M&L for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to ( Fe 290 Gde - E-165 )complete all as specified and as directed. 450 Kg
15 15 Supply and fix in repair steel peg stay 300mm long for steel window and ventilators complete all as specified and directed. 20 Each
16 16 Supply and fix in repair mild steel handle 150mm long suitable for steel window and ventilators complete all as specified and directed. 20 Each
17 17 Hacking out old broken glass (any thickness, size,quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. 30 Sqm
18 18 Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. 60 Sqm
19 19 S &F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 32 Sqm
20 20 Supply and fix in repairs Galvanised mild steel wire cloth, but 0.56mm nominal dia of wire and average width of aperture 1.00mm complete all as specified and as directed. 30 Sqm
21 21 S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. 28 Each
22 22 S&F butt hinges medium weight cold rolled mild steel complete size 100mm complete all as specified and directed. 90 Each
23 23 S & F 150mm alluminum handles, cast type, anodised etc complete all as specified and directed. 116 Each
24 24 S & F 150 mm alluminum anodised barrel tower bolts of extruded sections and fixed complete all as specified and directed. 116 Each
25 25 S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in pressed steel frame including necessary welding or bolting complete all as specified and directed. 10 Each
26 26 M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) in bed blocks for hold fast, back filling &similar work etc complete all as specified and directed. 2 Cum
27 27 Preparation of preprimed old steel surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. 165 Sqm
28 28 M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 145 Sqm
29 29 S&F rotational moulded polythyene 500 litrs water storage tanks cylindrical vertical with closed top hoisted and fixed in position incl. 20mm dia float valve brass fitting including dismantling of existing water tank and removing from site. All as specified and directed including old disconnecting and taking down the existing water tank complete all as specified and directed. 8 Each
30 30 Supply and fixing PVC lid for poly water storage tanks of capacity 500 litres including PVC hinges and PVC locking both complete all as specified and directed. 20 Each
31 31 S&F in repair 15mm dia PVC connection with PTMT nuts and PVC washers 60 cm long and connecting of water pipes complete all as specified and directed. 40 Each
32 32 S&F PTMT grating with 100mm dia with or with out waste hole complete all as specified and directed. 20 Each
33 33 S&F in repairs chromium plated brass shower roses 125mm size fixed in repair to steel pipe as union complete all as specified and directed. 12 Each
34 34 Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed. 80 RM
35 35 Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. 60 RM
36 36 S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed. 50 RM
37 37 S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed. 40 RM
38 38 Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed. 30 RM
39 39 Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed. 20 RM
40 40 S&F bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed. 30 Each
41 41 S&F in repair 15 mm bore pillar taps cast copper alloy with capstan head chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repair complete all as specified and directed. 8 Each
42 42 S&F in repair concealed stop cock 15mm dia bore chromium plated cast copper alloy with long shank and cup (concealed type) including dismantling of existing and surface finishing and making good surface condition complete all as specified and directed. 10 Each
43 43 S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed. 40 Each
44 44 S&F in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms complete all as specified and directed. 10 Each
45 45 S&F in repairs Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed. 20 Each
46 46 S&F Water closet vitreous china squatting pan, orissa pattern 580x440mm white with integral foot rests excluding flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified and directed. 10 Each
47 47 M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed. 4 Each
48 48 S&F PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern, white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia etc complete all as specified and directed. 12 Each
49 49 S&F in repair vitreous china wash hand basin white flat back size 580 x 450mm incl waste, china & porcelain stopper incl brackets complete all as specified and directed. 8 Each
50 50 Supply & Fixing vitreous china urinal half stall type with CP spreadr white with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. 4 Each
51 51 S&F Looking mirror 5.5 mm thick of selected quality glass of size 600 x 450 mm bevelled edge ,mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washers including aluminium anodized frame complete all as specified and directed. 8 Each
52 52 S&F 20 mm PVC coated decorative fancy type curtain rod including brackets to hold rod in position, ABS finials, appropiate no of rings of approved quality etc complete all as specified and directed. 160 RM
53 53 Dismantling unframed timber scantlings 40 Sqcm and over in section any position complete all as specified and directed. 0.65 Cum
54 54 M&L for providing cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concreting complete all as specified and as directed. 2 Cum
55 55 S&F steel work in structural steel/tubular truss including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed. 480 Kg
56 56 M&L for pre painted GALVALUME ALUMINIUM ZINC coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with tapping screws including taking down existing AC corrugated/semi corrugated sheet complete all as specified and directed. 90 Sqm
57 57 M&L for pre painted GALVALUME ALUMINIUM ZINC coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including taking down existing AC corrugated/semi corrugated sheet complete all as specified and directed. 10 Sqm
58 58 Supply and fix in repair of towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. 8 Each
59 59 Demolition of cement concrete in ground floors and paving not exc 15cm thickness (below or above ground level) including surface finishes of any type such as Mosaic, terrazo tile/tiles complete all as specified and directed. 32 Cum
60 60 M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. \nNote : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection. 160 Sqm
61 61 M & L cement concrete 75 mm thick 1:4:8 type D2 ( using 40 mm graded stone aggregate) as in sub base even and smooth without using extra cement completed all as specified and directed. 80 Sqm
62 62 M & L cement concrete 40 mm thick 1:2:4 type B1 (using 20 mm graded stone aggregate) as in flat floor finished even and smooth without using extra cement completed all as specified and directed. 40 Sqm
63 63 Supply only 38 mm wide & 3 mm thick glass dividing strips complete all as specified and directed. 24 RM
64 64 M&L for Cement Concrete 25mm thick type B-1 1:2:4 (using 20mm graded stone Aggregate) as in flooring rough to receive further treatement (tile/kota stone/marble) complete all as specified and directed. 360 Sqm
65 65 M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 4 Cum
66 66 M&L Vetrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid including 15 mm thick CM 1:6 screed bed complete all as specified and directed. 60 Sqm
67 67 M & L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. 200 Sqm
68 68 M & L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.06 Sqm but n. Exc. 0.11 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. 40 Sqm
69 69 M&L for heavy duty exterior grade tile texured finish of 300X300X10 mm thick mic/vitrified tile including 15 mm thick screed bed in CM 1:4 as in steps complete all as specified and directed. 40 Sqm
70 70 Demolition of brick work built in cement mortar complete all as specified and as directed. 8 Cum
71 71 M&L Brick work sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. 6 Cum
72 72 All as per item No. 71 here-in-before but except brick complete all as specified and directed. 1 Cum
73 73 M&L for brick work with sub class bricks straight or curved on plan to any radius in half brick walls built in cement mortar (1:4) complete all as specified and directed. 10 Sqm
74 74 M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering, slightly rounded or chamfered angles and throating including necessary form work and fair finishing the exposed surfaces of concrete complete all as specified and directed. 1 Cum
75 75 Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.\n 400 Sqm
76 76 Material and labour for rendering 15mm thick in cement mortar (1:6) on faces other than fair of internal brickwork or concrete surfaces, finished surface even and smooth without using extra cement complete all as specified and as directed. 180 Sqm
77 77 Material and labour for rendering 15mm thick in cement mortar 1:6 on fair faces of internal brickwork or concrete surfaces, finished surface even and smooth without using extra cement complete all as specified and as directed. 230 Sqm
78 78 Material and labour for 10 mm thick plastering in CM (1:3) on concrete surfaces as ceiling in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed. 50 Sqm
79 79 Supply only intergral water proofing compound ISI marked complete all as specified and as directed. 80 Kg
80 80 M&L for two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces over one coat of primer complete all as specified and as directed. 230 Sqm
81 81 M&L for two coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces complete all as specified and as directed. 50 Sqm
82 82 M&L for applying two coat of oil bound distemper on newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed. 180 Sqm
83 83 Dismantling CI/PVC (SWR) pipes jointed in cement mortar obtained either from trenches/wall as required complete all as specified and as directed. 120 RM
84 84 Supply and fix in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed. 80 RM
85 85 Supply and fix in repair PVC (SWR) bend 110 mm dia complete all as specified and directed. 6 Each
86 86 Supply and fix in repair PVC (SWR)branch piece, single T equal or unequal 110 mm dia complete all as specified and directed. 4 Each
87 87 Supply and fix in repair PVC (SWR) pipe 75 mm bore,single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed. 40 RM
88 88 Supply and fix in repair PVC (SWR) bend 75 mm dia complete all as specified and directed. 6 Each
89 89 Supply and fix in repair PVC (SWR) branch piece, single T equal or unequal 75 mm dia complete all as specified and directed. 4 Each
90 90 Dismentling ceiling board any description fixed in any position with nails in roofing complete all as specified and directed. 50 Sqm
91 91 M&L for suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board, water resistant, termite resistant, fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as specified and directed. \n 50 Sqm
92 92 Taking down aluminium door shutter of any description, taking-out double action floor spring machine, hydraucally regulated, cleaning, oiling, easing and adjusting to make fully functional and refixed in the position including refixing shutter complete all as specified and directed. 8 Each Job
93 93 Supply and fixing for aluminium powder coated aluminium window having three track with aluminium section 92 mm X 31.75 mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40 mm X 18 mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rmt mounted on bearing to slide on tracks plain anodized in approved shade including fixing of 5mm thick sun/heat reflacted glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. complete all as specified and directed. (Min thickness of powder coating shall be 50 micron). 12 Sqm
94 94 S&F in repairs, double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govrning pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. 2 Each
95 95 S&F in repairs, hydraulic door closer aluminium body, hydraulically regulated, designation No. 2, universal type, suitable for door shutters and fixed complete all as specified and directed. 3 Each
96 96 S&F in repairs, floor door stopper 140 mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed complete all as specified and directed. 6 Each
97 97 S& F in repair 300 mm long aluminum handles american type fited to aluminum door shutter complete all as specified and directed. 4 Each
98 98 S&F in repair mortice lock verticle type 100 mm 4 lever brass fixed in aluminum door complete all as specified and directed. 4 Each
99 99 S&F in repair 4.8 mm thick sheet glass ordinary quality in as in aluminum door and windows exe .5 sqm in each pane complete all as specified and directed. 4 Sqm
100 100 S&F in repairs 5mm thick tinted sheet glass (one side mirror finish) in aluminium frame including necessary rubber gasket and aluminiumm snap beading complete all as specified and directed. 4 Sqm
101 101 S&F in repair aluminium snap bead (Glazing clip) for securing glass etc in aluninium frame work complete all as specified and directed. 10 RM
102 102 S&F in reapirs powder coated aluminum frame for door/door shutter of any section, replacing defective portion of any section in existing door and windows complete all as specified and directed 16 Kg
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail