Military Engineer Services-MES has published Special Repair To Bldg No P819 And P1 Jco Accn At Odtd Provn Of Stainless Steel Sink Utnsile Rack Tiling Aluminium Window Kitchen Top Marble In Bldg No P613 P614 At Sarvatara Nagar Provn Of Ramp At Washing Point Near Bldg No T89 At 105 Adr At Ge Dehu Road. Submission Date for this Tender is 22-05-2021. Road Work Tenders in GE Dehu Road, Pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Apr-2021 | Amdt to NIT | Other | 15-05-2021 |
| 2 | 15-May-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-05-2021 |
| NAME OF WORK : Spl repair to bldg No P-819 of Sarvatra Nagar, Spl repair to bldg No P-01 (Single JCOs Accn) at ODTD, Provn of stainless steel sink , Utnsile rack, tiling, aluminium window and kitchen top (Marble) in Bldg No P-613 and P-614 at Sarvatara Nagar & Provn of ramp at washing point near bldg No T-89 (Engr Store dump area) at 105 AD Regt under AGE B/R (West) at GE Dehu Road. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed. | 120 | Sqm | |
| 2 | 2 | Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed. | 12 | Qtl | |
| 3 | 3 | S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed. | 120 | Sqm | |
| 4 | 4 | Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed. | 345 | Sqm | |
| 5 | 5 | M & L for providing 25 mm thick PCC 1:2:4 type B1 ( using 20mm graded stone aggregates ) as in levelling course including filling undulations over roof slab complete all as specified and directed. | 194 | Sqm | |
| 6 | 6 | M&L for rendering 10 mm in CM 1:4, for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed. | 120 | RM | |
| 7 | 7 | M/L for cleaning the plastered / concrete surfaces with wire brushes and applying water proofing treatment as under :-\n(a) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface.\n(b) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method.\n(c) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. \n(d) Finally applying a coat of solar reflective bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane. | 335 | Sqm | |
| 8 | 8 | Disconnecting existing PVC water tanks of capacity 500 litres, complete all as specified and as directed. | 8 | Each | |
| 9 | 9 | S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. | 8 | Each | |
| 10 | 10 | Taking up or down steel tubing and connections of 15 mm bore of pipe complete all as specified and as directed. | 75 | RM | |
| 11 | 11 | Taking up or down steel tubing and connections of 20 mm bore of pipe complete all as specified and as directed. | 45 | RM | |
| 12 | 12 | M & L for 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. | 170 | RM | |
| 13 | 13 | M & L for 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. | 45 | RM | |
| 14 | 14 | S & F ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms ) complete all as specified and as directed. | 8 | Each | |
| 15 | 15 | S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union all as specified and as directed. | 28 | Each | |
| 16 | 16 | S&F 15 mm dia bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe complete all as specified and as directed. | 32 | Each | |
| 17 | 17 | Do as item above but S&F in repair | 28 | Each | |
| 18 | 18 | S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed. | 8 | Each | |
| 19 | 19 | S & F in repairs 15 mm dia Brass cromium plated shower rose of 125 mm long leg complete all as specified and as directed. | 8 | Each | |
| 20 | 20 | S&F in repairs Grating round 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed. | 16 | Each | |
| 21 | 21 | S&F in repairs Stainless Steel Toilet Roll Holder of Make Jagur/Prayag complete all as specified and as directed. | 4 | Each | |
| 22 | 22 | S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand including 32mm dia CP waste coupling and PVC waste pipe complete all as directed. | 8 | Each | |
| 23 | 23 | S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce complete all as specified and as directed. | 4 | Each | |
| 24 | 24 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white with 'P' or 'S' trap including connection to drains (or outgoing pipes) and to the flushing pipes, complete all as specified and directed. | 4 | Each | |
| 25 | 25 | S& F Sinks made of 1 mm thick stainless steel for kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar, overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and as directed.\n | 16 | Each | |
| 26 | 26 | Do as item above but S&F in repair | 4 | Each | |
| 27 | 27 | S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. | 16 | Each | |
| 28 | 28 | S&F in repairs PVC low level flushing cristern, white 10 litre capacity incl PVC inlet pipe with ball valve,float and handle and brackets alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed. | 8 | Each | |
| 29 | 29 | S&F in repair kitchen plate rack made of 1mm thick stainless steel sheets including fixing. overall size 915mm x 915mm x 255 mm all as specified and directed.Make Nirali/Silver shine/Jindal | 20 | Each | |
| 30 | 30 | S&F in repairs vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed complete all as specified and as directed. | 4 | Each | |
| 31 | 31 | S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed by Engineer-in-Charge. | 4 | Each | |
| 32 | 32 | S & F in repairs 600xmmx450mm mirror of selected quality galss, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. | 4 | Each | |
| 33 | 33 | Dismantling / taking down AC waste/vent pipes fixed to walls with all fittings/ accessories 100 mm dia pipes all as specified and directed by Engineer-in-Charge. | 40 | RM | |
| 34 | 34 | S&F, PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm dia complete all as specified and directed by Engineer-in-Charge. | 40 | RM | |
| 35 | 35 | S&F,110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed by Engineer-in-Charge. | 10 | Each | |
| 36 | 36 | S&F, 110 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge. | 6 | Each | |
| 37 | 37 | Dismantling floor, hearth or wall tiling including cement mortar bedding and backing all as speicfied and directed. | 715 | Sqm | |
| 38 | 38 | M & L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete. | 35 | Sqm | |
| 39 | 39 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 sqm but n exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and as directed. | 260 | Sqm | |
| 40 | 40 | Ditto as per item No 39 above but on skirting over and including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed. | 20 | Sqm | |
| 41 | 41 | M&L for vitrified coloured tiles 10mm th (square/rectangular) polished, area of each tile exc.0.36 sqm but n exc 0.42 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified and as directed. | 100 | Sqm | |
| 42 | 42 | Ditto as per item No 41above but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed. | 10 | Sqm | |
| 43 | 43 | M & L for Glazed coloured ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced. | 330 | Sqm | |
| 44 | 44 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc laid , bedded and jointed in cement mortar complete all as specified and as directed. | 2 | XSqm | |
| 45 | 45 | M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade laid over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6 complete all as specified and as directed. | 49 | Sqm | |
| 46 | 46 | M&L for 20-25mm thk machine cut cuddappah stone slab set and jointed with grey cment slurry mixed with pigment to match the shade of the slab including grinding polishing complete, all as directed. | 30 | Sqm | |
| 47 | 47 | Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. | 35.3 | Cum | |
| 48 | 48 | Demolition of cement concrete (reinforced ) as in chajja complete all as specified and directed by Engineer-in-Charge. | 2 | Cum | |
| 49 | 49 | M&L for 100 mm thick Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate finished surface even & smooth without using extra cement complete all as specified. | 15 | Sqm | |
| 50 | 50 | M & L for cement concrete 1:3:6, Type C2 (using 40mm graded aggregates) as in plinth protection, 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed. | 105 | Sqm | |
| 51 | 51 | M & L for 100 mm thick Cement concrete 1:4:8, type D-2 (using 40 mm graded aggregate) as in sub base to hard standing/flooring etc complete all as specified and as directed. | 235 | Sqm | |
| 52 | 52 | M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment over and including 25 mm thick sand cushion complete all as specified and as directed. | 140 | Sqm | |
| 53 | 53 | M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed. | 120 | Sqm | |
| 54 | 54 | Taking down chowkhats or frame with shutter (without taking off shutter from the frames) exc. 1.5 Sqm but n. exc. 4 Sqm each. | 28 | Each | |
| 55 | 55 | –Ditto- as item No 54 above but n.exc. 1.50 sqm each | 14 | Each | |
| 56 | 56 | Taking down steel window/ventiltors of any size | 40 | Each | |
| 57 | 57 | S&F pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm | 32 | RM | |
| 58 | 58 | S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm | 10 | RM | |
| 59 | 59 | M/L for PCC 1:3:6 type C0 (using 12.5 mm graded stone aggregate) in door frame filling all as specified and directed. | 0.35 | Cum | |
| 60 | 60 | S&F 2nd class hard wood factory made 35 mm thick plain framed panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces, the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed all as specified and as directed. | 18 | Sqm | |
| 61 | 61 | S & F 2nd class hard wood factory made 35 mm thick glazed & skeleton shutter open rebated and prepared to receive gauze (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified. | 16 | Sqm | |
| 62 | 62 | S & F aluminum powder coated frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats for fixing etc complete | 25 | KG | |
| 63 | 63 | S & F steel window double leaf double shuttered (gauze shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauze bars of FI 10x 3mm thick dovetailed or welded all as specified and directed. \nNote:- Glass/Gauze shall be measured and paid seperately | 6 | Sqm | |
| 64 | 64 | S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00mm fixed to steel window with nut bolt. | 32 | sqm | |
| 65 | 65 | S & F Stainless Steel wire cloth ,0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. | 6 | SQM | |
| 66 | 66 | S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 sqm in each pane | 24 | sq m | |
| 67 | 67 | S&F aluminium powder coated window sliding type (3 track) with frame size100x35x1.2mm and shutter 39.40x17.70x1.2mm with two glass shutter & one mesh shutter incl necessary jointing cleats glazing clips, rubber packing,and locking arrangement powder coated aluminium snap beading screws including 4mm plain float glass & 0.36 mm dia and 1.4 mm width of aperture SS wire mesh, fittings etc complete all as specified. | 62 | Sqm | |
| 68 | 68 | S&F aluminum powder coated ventilator shutter top hung type without sash bars, aluminum section weighing not less than 0.55 Kg per m including necessary joining cleats , glazing clips, rubber packing, alu. Snap beading , screws, aluminum fittings, suitable handles etc complete . | 15 | Sqm | |
| 69 | 69 | S&F Aluminium grills for windows and ventilators, powder coated, weight not less than 3.00 Kg per Sqm, design and pattern all as directed by Engr-in-Charge. | 16 | Sqm | |
| 70 | 70 | S&F in repairs curtain rod 25 mm dia powder coated fancy type complete all as specified and directed. | 60 | RM | |
| 71 | 71 | S&F in repairs brackets for curtain rod, fancy type powder coated for 25 mm dia curtain rod complete all as directed. | 80 | Pair | |
| 72 | 72 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing | 60 | RM | |
| 73 | 73 | S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed by Engineer -in -charge. | 15 | Sqm | |
| 74 | 74 | S & F 150 mm size extruded aluminium alloy handles,fabricated type anodised. | 26 | Each | |
| 75 | 75 | S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm | 18 | Each | |
| 76 | 76 | S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 100mm | 24 | Each | |
| 77 | 77 | S& F 75 mm But hinges, stainless steel, bright polished and fixed, type B-11 all as specified and directed | 48 | Each | |
| 78 | 78 | S& F 100 mm But hinges, medium weight, colled rolled mild steel all as specified and directed | 78 | Each | |
| 79 | 79 | S & F aluminium alloy , anodised , sliding door bolt with hasp , staple ( bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed - length of bolt 250 mm | 14 | Each | |
| 80 | 80 | Dismantling of boarding, any description and fixed in any position with nails complete all as specified and directed. | 5 | Sqm | |
| 81 | 81 | Dismantling timber fillets under 40 Sq.cm in section unframed work , in any position complete all as specified and directed. | 10 | RM | |
| 82 | 82 | S & F in repairs pre-laminated particle board 25mm thick exterior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl 6mm thick teak wood lipping patti complete. | 48 | Sqm | |
| 83 | 83 | S & F 30 mm thick Second class hard-wood Boarding fixed with nails in any\nsituation complete all as specified and directed. | 5 | Sqm | |
| 84 | 84 | S & F of 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc 13 & not exc 25 sqcm complete all as specified and directed. | 10 | RM | |
| 85 | 85 | S&F in repairs continuous Piano type hinges mild steel bright finish or electrogalvanised (width of flap 40 mm when open) complete. | 18 | RM | |
| 86 | 86 | S & F of 100 mm size brass hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. | 10 | Each | |
| 87 | 87 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. | 425 | Sqm | |
| 88 | 88 | M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed. | 150 | Sqm | |
| 89 | 89 | M & L for Rendering 5 mm thick cement plaster on concrete surface of ceiling in cement mortor 1:3 finished even and smooth without using extra cement complete all as specified and as directed. | 75 | Sqm | |
| 90 | 90 | M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. | 218 | Sqm | |
| 91 | 91 | M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper over a coat of primer including 3mm thick wall care putty complete all as specified and as directed. | 150 | Sqm | |
| 92 | 92 | M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and as directed. | 75 | Sqm | |
| 93 | 93 | M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint complete all as specified and as directed. | 218 | Sqm | |
| 94 | 94 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer | 41 | sq m | |
| 95 | 95 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. | 48 | Sqm | |
| 96 | 96 | Complete removal of existing treatment from old decorated surfaces of walls, prepration of surfaces and applying two coats of distemper oil emulsion over and including a coat of primer complete all as specified and directed by Engineer - in - Charge. | 860 | Sqm | |
| 97 | 97 | Complete removal of existing treatment from old decorated surfaces of walls, prepration of surfaces and applying two coats of cement base paint complete all as specified and directed by Engineer - in - Charge. | 295 | Sqm | |
| 98 | 98 | M&L applying one coat of white wash on old decorated surfaces of ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge. | 290 | Sqm | |
| 99 | 99 | M&L preparation of old painted wooden surfaces of any description not exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge. | 80 | Sqm | |
| 100 | 100 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge. | 20 | Sqm | |
| 101 | 101 | Demolition of cement concrete (unreinforced) in Suken portion exc 15 cm thickness (below or above ground level) complete all as specified and directed. | 1.8 | Cum | |
| 102 | 102 | M & L cement conrete 1:7:12 type F2 (using 40mm graded aggregate) as in sunkun filling complete all as specified and directed. | 1.8 | Cum | |
| 103 | 103 | Providing and carrying out water proofing treatment to toilet ,sunken slabs ,wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including 15 mm thick cement plaster in CM 1:4 complete all tools and plants as per manufacturer's specification complete all as specified and directed. | 3 | Sqm | |
| 104 | 104 | M & L for excavating in post holes (or similar holes)in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, | 8 | Each | |
| 105 | 105 | M & L for Cement concrete 1:4:8 type D-2(40 mm graded aggregate) as in foundation, filling and mass concrete. | 2.75 | Cum | |
| 106 | 106 | S & F mild steel work in hand rail, half round or other stock section or core for fixing of wooden hand rails, bluster, running bars, nosing of steps, wind ties, post and struts for fencing, flat iron fillets and the like or any steel member including necessary cutting, drilling holes, notching etc. as required conforming to Fe-290 Grade E-165 complete all as specified and directed. | 1200 | Kg | |
| 107 | 107 | Rolled mild steel plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes with out any attachment Fe 410 W Gde E 250 quality A. | 50 | Kg | |
| 108 | 108 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for taking out cables, pipes etc or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. | 59.05 | Cum | |
| 109 | 109 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. | 37.05 | Cum | |
| 110 | 110 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. | 22 | Cum | |
| 111 | 111 | M & L for providing reinforced cement concrete 1:2:4 ,Type B1, using 20 mm graded stone aggregate as in foundation including rafts, footing, plinth beams, base of columns and the like complete all as specified and directed. | 8 | Cum | |
| 112 | 112 | M & L for providing reinforced cement concrete 1:2:4 ,Type B1, using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed. | 3 | Cum | |
| 113 | 113 | M & L for providing reinforced cement concrete 1:2:4 , Type B1 ,using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed. | 2 | Cum | |
| 114 | 114 | M & L for providing reinforced cement concrete 1:2:4 , Type B1 ,using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed. | 1.8 | Cum | |
| 115 | 115 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. | 500 | Kg | |
| 116 | 116 | Ditto as per item No 115 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders | 150 | Kg | |
| 117 | 117 | M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed. | 10 | Sqm | |
| 118 | 118 | M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed. | 15 | Sqm | |
| 119 | 119 | M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. | 15 | Sqm | |
| 120 | 120 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed. | 20 | Sqm | |
| 121 | 121 | Supply only liquid water proofing compound. | 1 | KG | |
| 122 | 122 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in in soft / loose soil complete all as specified and directed. | 15 | Sqm | |
| 123 | 123 | Cutting chases, pinning in brick wall, marking good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing , steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good , cutting not exc 10cm in girth | 20 | Rm | |
| 124 | 124 | Rougheing surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc | 40 | Sqm | |
| 125 | 125 | S&F 40mm waste fittings, brass, chromium plated for sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed | 16 | Each | |
| 126 | 126 | M&L for 40mm bore of pipe low density polypthethlyene pipes of pressure rating 6kgf /sqcm | 16 | RM | |
| 127 | 127 | S & F 75 mm dia outlet cast iron nahani trap with grating incl jointing to waste pipe fixed in cement cocncrete etc. | 16 | Each | |
| 128 | 128 | E/M Part | |||
| 129 | 129 | Taking down carefully copper/ aluminium point wiring (light, fan, socketor ower) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators sockets etc. and making good disturbed surface of walls, floors, etc. | 219 | Point | |
| 130 | 130 | Taking down unserviceable main switches, DBs along with teak wood boards etc and making good disturbed surfaces of walls/floors to match the existing surfaces all as specified | 5 | Each | |
| 131 | 131 | Taking down unserviceable submain wiring alongwith batten / PVC/steel conduits etc and making good disturbed surfaces of walls/floors to match the existing surfaces all as specified and as directed by Engineer-in-Charge | 60 | RM | |
| 132 | 132 | M&L for point wiring complete including single core PVC insulated and unsheathed type flexible bright unsheathed multi stranded 1.5sqmm copper conductor FRLS PVC casing caping and surfaces/concealed PVC conduit & accessories having ISI mark to be fixed with proper screws / (MS steel strips if required) including all accessories / fittings/ junction boxes/ inspection covers etc including hard PVC board of required size fixed with wall surface by means of brass screws and sunk/ cupwashers, for mounting of switches fan regulators etc including 1.5 sqmm (22/0.30mm) 1100V grade PVC insulated, unsheathed flexible multi stranded copper conductors FRLS cable as continuos earth wire connected to metallic bodies of luminaries/ fans etc. at one end and to common earth duly at other end for :- | |||
| 133 | 132.01 | One light point controlled by one way switch | 80 | Point | |
| 134 | 132.02 | One light point controlled by two two way switches | 2 | Point | |
| 135 | 132.03 | One fan/exhaust fan point controlled by one switch | 32 | Point | |
| 136 | 132.04 | One switch socket 5 pin 5 Amps flush type on same board | 52 | Point | |
| 137 | 132.05 | One switch socket 5 pin 5 Amps flush type on Independent board | 36 | Point | |
| 138 | 132.06 | One bell / buzzer point controlled by one push button on the same board with other switches or independent | 4 | Point | |
| 139 | 133 | all as per item no 132 above but with 2.5sqmm (36/0.3mm) FRLS cable for one socket 5 pin 15 Amps flush type on independent board with including earthwire complete | 13 | Point | |
| 140 | 134 | S&F switch piano flush type single pole one way230V 6 Amps | 200 | Each | |
| 141 | 135 | S&F switch piano flush type single pole two way230V 6 Amps | 4 | Each | |
| 142 | 136 | S&F Socket outlet 2 in 1, 3 pin 5 Amps flush type 230V S.P. multipurpose type | 88 | Each | |
| 143 | 137 | S&F switch socket combination flush type multi purpose 5A/16A, 5 in 1 controlled by one switch 230V | 13 | Each | |
| 144 | 138 | S&F Lamp holder (angular type), PVC/ polycarbonate type batten fittings insulated body with back plate | 16 | Each | |
| 145 | 139 | S&F ceiling rose surface PVC 50mm dia three terminals including PVC mounting block, white/ivory/urea finish | 112 | Each | |
| 146 | 140 | M&L in repair for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required for ceiling fan 230 Volt AC supply, 50 Hz 1200/1400 mm sweep | 16 | Each | |
| 147 | 141 | S&F Bell push, flush type 5 Amp 230 V | 4 | Each | |
| 148 | 142 | S&F Bell ding dong type 230 V | 4 | Each | |
| 149 | 143 | M&L submain wiring with 2 single core PVC insulated multistranded flexible copper conductor 100 Volts grade (FRLS) cables 4 Sqmm and 1 run 4 Sq mm PVC insulated multistrand copper conductor cable (FRLS) of green colour for continous earthing drawn through PVC surface / concealed PVC conduit of suitable size and with all accessories all as directed and specified by Engr-in-Charge. (Note : Two runs of 4 Sqmm main wire, one run of 4 Sqmm earth wire and one run of surface/concealed PVC conduit of suitable size and with all necessary fixing accessories area shall be measured as one length) | 60 | RM | |
| 150 | 144 | M&L for MCB DB TPN sheet metal double door enclosure mounted on teak wood board of suitable size for mounting MCB 230 V with 200 Amps rated bus bar 4 way | 1 | Each | |
| 151 | 145 | M&L for MCB DB SPN sheet metal double door enclosure mounted on teak wood board of suitable size for mounting MCB 230 V with 200 Amps rated bus bar 8 way | 4 | Each | |
| 152 | 146 | S&F MCB SPN 5-32 Amps, 240 Volts 10 KA | 6 | Each | |
| 153 | 147 | S&F MCB SP 5-40 Amps, 240 Volts 10 KA | 36 | Each | |
| 154 | 148 | S&F in repair of 4 feet 20 W linear aluminium LED Batten professional CW 6500K cool white complete with all accessories prewired and connecting up twin core twisted flexible copper conductor cable with suitable size Cat Part No LHEXACP7IN1W020 of Havells, SZSLAMX020 of Shakti and equivalent of Philips, Bajaj, Crompton, Havells and HPL | 48 | Each | |
| 155 | 149 | S&F in replacement of 2 feet 09 W linear aluminium LED Batten professional CW 6500K cool white complete with all accessories prewired and connecting up twin core twisted flexible copper conductor cable with suitable size Cat Part No LHEXACP7IN1W009 of Havells, SZSLAMX009 of Shakti and equivalent of Philips, Bajaj, Crompton, Havells and HPL | 16 | Each | |
| 156 | 150 | S&F in repair LED lamp pin type 09 watt Make : Havells Cat part no LHLDEUHEML8R009 or equivalent of Bajaj/Phillips/Crompton | 8 | Each | |
| 157 | 151 | Taking down ceiling fan 1200/1400mm sweep/ exhaust fans including disconnection of electric connection and deposit in MES yard | 28 | Each | |
| 158 | 152 | S&F Ceiling fans with blades complete with accessories 230V, 1200mm sweep. BEE 5 star rated | 20 | Each | |
| 159 | 153 | S&F in repair LED light fitting for building security/ street light fitting 1x 20 w, 230V, complete with all accessories internally pre wired and including connecting up with 2.5sqmm twin core flexible copper cable for connection from ceiling rose to fitting including LED light and GI bracket medium grade of 1.2 meter shaped to 120 degree for fixing of fitting on wall with clamps Make : Bajaj/Phillips/Crompton | 1 | Each | |
| 160 | 154 | S&F exhaust fan AC single phase 230 V, 300mm sweep, heavy duty with louvers, metal body, blades, insulation class A including capacitor complete all as specified and directed by Engr-in-charge . Make : Model : Ventil Air DB 300mm of Havells and equivalent of GEC/Bajaj/Khaitan/Usha | 8 | Each | |
| 161 | 155 | Supply and fixing in repair LT indoor panel board made up of 2 mm thick MS sheet duly powder coated with closing and locking arrangement as per suitable size fixing on wall with wooden plank of 18 mm thick inside panel including taking down and refixing existing electronic meter with replacement of following new items :-\n(a) MCB DB TPN 4 way double door - 01 Nos\n(b) Isolator 4 pole 100 A-01 No (Incoming)\n(c ) Isolator DP 40 A-05 Nos (Outgoing) | 1 | Each | |
| 162 | 156 | Dismantling / disconnecting LT cable of any size with accessories\n(Note:- Excavation and earthwork shall be measured and paid seperately.) | 120 | RM | |
| 163 | 157 | Supply, alying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, elctric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core Size Make : Havells/Polycab/Gloster | 120 | RM | |
| 164 | 158 | M & L earthing complete with GI steel plate earth electrode 60 cm X 60 cm X 6.3 mm thick, buried directly in ground (Earth pit not less than 2.25 m deep below ground level) with top edge of earth the plate not less than 1.5 metres below ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolt , nut & washers of GI or steel, earth wire protected by GI pipe 15 mm dia ' light garde' including charcoal dust, common salt, excavation and earth work, PCC pit with 1:3:6 Type C1, 40 mm thick RCC cover in 1:2:4 Type B1 reinforced with 8 mm dia TMT bars 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel and GI watering pipe light grade 20 mm bore all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion. | 4 | Each | |
| 165 | 159 | M & L for DWC HDPE Pipe 50 mm outter dia for UG cable protection passing of cables on wall or floors with shaddling and under ground and all as specified and directed by Engineer-in-Charge. | 115 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
