Military Engineer Services-MES has published Provision Of Footpath With Interlocking Paver Blocks Along The Roads Of D And C Sector At Dolphin Hill , Ins Circars , Road Furniture And Road Marking At Various Locations Of Officers And Sailors Married Accommodation At Dolphin Hill , External Service. Submission Date for this Tender is 27-05-2021. Road furniture Tenders in Visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 11-May-2021 | 82140 Corrigendum 1 | BOQ | 20-05-2021 |
2 | 20-May-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-05-2021 |
Name of the Work: Provision of Footpath with Interlocking Paver Blocks along the roads of D & C Sector at Dolphin Hill, INS Circars, Road furniture and Road Marking at various locations of Officers and Sailors Married Accommodation at Dolphin Hill, External Services and related works for Refit Support Infrastructure at ND and Special Repairs to Two Numbers of Security Posts [Building No. 551 (01) and (08) (B)] at TPW-II Complex, ND, Visakhapatnam | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. | BI01010001010000000000000515BI0100001111 | 2 | Cubic Metre |
2 | 2 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. | BI01010001010000000000000515BI0100001112 | 1 | Cubic Metre |
3 | 3 | Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. | BI01010001010000000000000515BI0100001113 | 1 | Cubic Metre |
4 | 4 | M & L for brick work with Fly Ash bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed. | BI01010001010000000000000515BI0100001114 | 1 | Cubic Metre |
5 | 5 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. | BI01010001010000000000000515BI0100001115 | 100 | Square Metre |
6 | 6 | M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Zinc rich epoxy primer to all steel surfaces as antirust agent and welding steel wire Fabric / Mesh of size 75X25mm of weight not less then 3.0KG per Sq.m to existing reinforcement, applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's instructions and providing pressure Guniting averaging 30mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar 1:3 duly modifying the mortar with and including suitable bonding agent of M/s. Fosroc Chemicals or M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight of cement for sides and soffits of Slabs, Beams, Columns, Fins, Parapets Facias & Chajjas etc., finishing surface rough and finally rendering 15 mm thick in Cement Mortar 1:4 and finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of MD land complete all as specified and as directed. | BI01010001010000000000000515BI0100001116 | 40 | Square Metre |
7 | 7 | M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:3, including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately. | BI01010001010000000000000515BI0100001117 | 20 | Square Metre |
8 | 8 | M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately. | BI01010001010000000000000515BI0100001118 | 80 | Square Metre |
9 | 9 | Supply only integral water proofing compound [ISI marked] of approved make. | BI01010001010000000000000515BI0100001119 | 6 | Kilogram |
10 | 10 | M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. | BI01010001010000000000000515BI0100001120 | 50 | Square Metre |
11 | 11 | Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris to a distance not exceeding 1.50 KM complete all as specified and as directed. | BI01010001010000000000000515BI0100001121 | 53 | Square Metre |
12 | 12 | M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. | BI01010001010000000000000515BI0100001122 | 12 | Square Metre |
13 | 13 | M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. | BI01010001010000000000000515BI0100001123 | 20 | Square Metre |
14 | 14 | M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 10mm graded aggregate as in Sub base for flooring complete all as specified and as directed. | BI01010001010000000000000515BI0100001124 | 20 | Square Metre |
15 | 15 | Dismantling of Structural Steel work including Doors, Gates etc but excluding framed trusses complete all as specified and as directed. | BI01010001010000000000000515BI0100001125 | 4 | Quintal |
16 | 16 | Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed. | BI01010001010000000000000515BI0100001126 | 8 | Each |
17 | 17 | M & L for RCC M-20 Design Mix, using 20mm graded stone aggregate as in Slabs supported on walls, beams, columns, landings, shelves and the like complete all as specified. | BI01010001010000000000000515BI0100001127 | 7 | Cubic Metre |
18 | 18 | M & L for Powder Coated Aluminium Sections [Minimum 50 Micron thick] of approved colour as in Door, Window, Ventilator Frames, Partitions with one or more rebates and Door, Window, Ventilator Shutters, Sliding or Openable Type, with or without Sash Bar, Aluminium section weighing 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement [1 No], Suitable Handle [1 No], Stainless Steel Friction Hinges [1 No] per Window Shutter and 150mm Dia Handles on both sides, Tower bolts, 200 mm Long [2 Nos], per Door Shutter complete all as specified and as directed. \nNote: [a] The size of aluminium sections shall be all as specified in relevant IS code and MES Schedule Part - I.\n[b] Supply only panel inserts of Glass / Particleboard / Gauze / Grills will be measured and paid separately.\n[c] Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as Handles, Butt hinges, Tower Bolts, Stainless Steel Friction Hinges and fixing only of panel inserts of Glass / Particleboard / Gauze / Grills etc. | BI01010001010000000000000515BI0100001128 | 25 | Kilogram |
19 | 19 | S & F Aluminium Powder Coated [Minimum 50 Micron thick] Sections as in Window and Ventilator Shutters, Sliding Type, without Sash Bar, Aluminium section weighing 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement [1 No], Suitable Handle [1 No] per Shutter complete all as specified and as directed.\nNote: [a] Supply only panel inserts such as Glass / Gauge / Grills will be measured and paid separately.\n[b] Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as Handles, Locking Arrangement and fixing only of Panel inserts such as Glass / Gauge / Grills etc. | BI01010001010000000000000515BI0100001129 | 4 | Square Metre |
20 | 20 | Supply only 5mm thick sheet glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. | BI01010001010000000000000515BI0100001130 | 2 | Square Metre |
21 | 21 | Supply only 12mm thick, Prelaminated Particle Board, Both Sides with Decorative Choice Lamination, Medium Density, Interior Grade fixed with screws to wooden frames, partitions, shelves, cupboards, door panels complete all as specified and as directed. | BI01010001010000000000000515BI0100001131 | 2 | Square Metre |
22 | 22 | S & F Aluminium Powder Coated Sliding Window Frame and Shutters with 91 x 42 x 2 mm thick Four Track section for frames and 39.4 x 17.7 x 2 mm thick Sliding Section for Shutter Frame all round including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement [1 No], Suitable Handle [1 No] including glazing with 5 mm thick Tinted Glass, Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 including Powder Coated Aluminium Channel / F Channel of size 20 X 12 X 1mm for fixing Deco Grill and Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm complete all as specified and as directed. | BI01010001010000000000000515BI0100001132 | 13 | Square Metre |
23 | 23 | S & F Door Closer Hydraulically Regulated, Designation No. 3 universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 to 80 Kg of aluminium body complete all as specified and as directed. | BI01010001010000000000000515BI0100001133 | 2 | Each |
24 | 24 | S & F Aluminium anodised barrel Tower Bolt of size 200 mm size of extruded section complete all as specified and as directed. | BI01010001010000000000000515BI0100001134 | 4 | Each |
25 | 25 | Use and removal of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed. | BI01010001010000000000000515BI0100001135 | 6 | Square Metre |
26 | 26 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. | BI01010001010000000000000515BI0100001136 | 306 | Kilogram |
27 | 27 | M & L for preparation of newly plastered wall / Ceiling surfaces and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] over a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint complete all as specified and as directed. | BI01010001010000000000000515BI0100001137 | 30 | Square Metre |
28 | 28 | M & L for preparing newly plastered ceiling surfaces and applying three coats of white washing complete all as specified and as directed. | BI01010001010000000000000515BI0100001138 | 20 | Square Metre |
29 | 29 | M & L for preparation of old plastered or unplastered surfaces including brooming down or steel wire brushing and applying two coats of white wash on walls complete all as specified and as directed. | BI01010001010000000000000515BI0100001139 | 100 | Square Metre |
30 | 30 | M & L for preparing newly plastered Wall / Ceiling surfaces and applying two or more coats of Cement based Wall Care Putty on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer on Wall / Ceiling surfaces complete all as specified and as directed. | BI01010001010000000000000515BI0100001140 | 50 | Square Metre |
31 | 31 | M & L for Complete removal of existing treatment of any description on Wall / Ceiling surfaces and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] over a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint on Wall / Ceiling surfaces complete all as specified and as directed. | BI01010001010000000000000515BI0100001141 | 220 | Square Metre |
32 | 32 | S & F Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed. | BI01010001010000000000000515BI0100001142 | 2 | Each |
33 | 33 | S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. | BI01010001010000000000000515BI0100001143 | 2 | Each |
34 | 34 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft / Loose soil complete all as specified and as directed. | BI01010001010000000000000515BI0100001144 | 2250 | Square Metre |
35 | 35 | M & L for 100 mm thick, PCC 1:4:8, Type D-2, using 40 mm graded stone aggregate as in Sub base for flooring complete all as specified and as directed. | BI01010001010000000000000515BI0100001145 | 1419 | Square Metre |
36 | 36 | M & L for Sand Filling under floors or in foundations including watering and consolidation complete all as specified and as directed. | BI01010001010000000000000515BI0100001146 | 71 | Cubic Metre |
37 | 37 | M & L for Inter Locking Paving Blocks of 80mm thick, made with M40 Grade cement concrete using 20 mm graded stone aggregate, Hydraulically pressed of approved colour and pattern, shape and size conforming to IS - 15658 set in floors complete all as specified and directed. | BI01010001010000000000000515BI0100001147 | 450 | Square Metre |
38 | 38 | M & L for machine cut Kota stone slab flooring using 20 to 25mm thick slabs, laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. | BI01010001010000000000000515BI0100001148 | 20 | Square Metre |
39 | 39 | M & L for machine cut Kota stone slab as in riser of steps, skirting, dado etc. using 20 to 25mm thick slabs laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including borders, margins in two or more shades of slabs over backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed. | BI01010001010000000000000515BI0100001149 | 2 | Square Metre |
40 | 40 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, rendering 10mm thick in cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions for levelling the surface smooth to receive the water proofing membrane, priming the surface with a coat of cold applied bituminous primer @ 0.50 KG per Sq.m, applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sq.m, laying Polymeric water proofing membrane of weight not less than 3.00 Kg per Sq.m reinforced with polyester non-woven fabric of weight not less than 150 Grams per Sq.m, by torch application with side over lap of 100mm & end over lap of 150mm & tucked into the chases on vertical surfaces by thermo fusion including applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sq.m on top for water proofing treatment complete including taking down existing Roof Treatment of any description including PCC padding of any description and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed.\nNote: Water proofing compound will be measured and paid separately. | BI01010001010000000000000515BI0100001150 | 72 | Square Metre |
41 | 41 | Removal of excavated material [Soil] to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. | BI01010001010000000000000515BI0100001151 | 348 | Cubic Metre |
42 | 42 | S & F Stainless Steel of Grade AISI 304 as in Stairs [Framed] including Stringers, Treads, Landing, Balusters, Hand Rails etc including cleats, brackets, etc complete all as specified and as directed. . | BI01010001010000000000000515BI0100001152 | 875 | Kilogram |
43 | 43 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Hard / Dense Soil complete all as specified and as directed. | BI01010001010000000000000515BI0100001153 | 969 | Square Metre |
44 | 44 | M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rolled with power road roller of 8 to 12 ton capacity and consolidated to required gradient and camber complete all as specified. | BI01010001010000000000000515BI0100001154 | 232 | Cubic Metre |
45 | 45 | M & L for Inter Locking Paving Blocks of 60mm thick, made with M35 Grade cement concrete using 20 mm graded stone aggregate, Hydraulically pressed of approved colour and pattern, shape and size conforming to IS - 15658 complete all as specified and directed. | BI01010001010000000000000515BI0100001155 | 969 | Square Metre |
46 | 46 | M & L for providing Precast Cement Concrete Kerb Stones, Dividers of 100 mm thick with or without chamfered angles and flat, splayed, rounded or mitred tops Type, C1, 1:3:6, using 20mm Graded Aggregate, including all mouldings, set in Cement Mortar 1:4 including necessary earthwork excavation and applying Two Coats of synthetic enamel paint of approved complete all as specified and as directed. | BI01010001010000000000000515BI0100001156 | 187 | Cubic Metre |
47 | 47 | Removal of excavated material [Soil] to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. | BI01010001010000000000000515BI0100001157 | 291 | Cubic Metre |
48 | 48 | M & L for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of colour White or Golden Yellow on roads, pavements and the like exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MOSRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed. | BI01010001010000000000000515BI0100001158 | 1800 | Square Metre |
49 | 49 | S & F in repairs Road Side Flexible Delineator [Reflector] as per approved model and conforming to IRC - 67, made of highly flexible material [restores back to their erect posture even after being hit by a speeding vehicle without damaging them], fitted with 100mm PMMA reflector, which emit excellent reflection during night time, overall height of the reflector shall be of 1300mm with 3 reflective strips of colour Amber, Red or White, as approved by GE with 200mm dia base, 75mm dia pole, fixed with Bolts, Nuts and Epoxy Glue complete all as specified and as directed. | BI01010001010000000000000515BI0100001159 | 40 | Each |
50 | 50 | S & F in repairs Road Stud, Two way reflective of size 100mm X 110mm X 20 mm [Approximately], ABS body with retro reflective panel of Amber, Red or White colour complete all as specified and as directed. | BI01010001010000000000000515BI0100001160 | 850 | Each |
51 | 51 | S & F in repairs Solar Road Studs [Bi-Directional] made of Aluminium Die cast matt finish of size 125 X 125 X 25mm [Approximately], working on High Efficiency Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt, One Ni-Mh or NI-cd Rechargeable Battery [1.2V / 1600 MA] with Six Super Bright LEDs with 10,000 to 18,000 mcd [Millicandela], with a minimum Operating time of 3-4 consecutive days with full charge, viewing distance / visibility not less than 800m with 2 Hz Flash Rate, Self operated from Dusk to Dawn, anti twist ribs on the bottom anchor / shank with high intensity reflective grade polymer sticker and conforming to IS - 12063, of Colour yellow or red or blue or green or white as approved by GE complete all as specified and as directed. | BI01010001010000000000000515BI0100001161 | 25 | Each |
52 | 52 | S & F in repairs Solar Road Side Delineator [Reflector] as per approved model and conforming to IRC - 67, made of Powder Coated MS Pipe, 50mm bore, 1000mm height, Heavy Grade, fitted with One Number Superior quality Solar Reflector made of Polycarbonate Round Body, Clear, UV Resistant with Four Super Bright LEDs of Colour Red / Blue / Yellow / White / Green, Flashing / Blinking / Still with 10,000 to 18,000 mcd [Millicandela], with a minimum Operating time of 3-4 consecutive days with full charge, viewing distance / visibility not less than 800m with 2 Hz Flash Rate, Self operated from Dusk to Dawn working on High Efficiency Mono-Crystalline Solar Panel 4 Volts / 0.6 Watt / 100 mAh, One Ni-Mh or NI-cd Rechargeable Battery [1.2V / 1600 mAh] with anti rust & anti theft steel net, fixed with Bolts, Nuts and Epoxy Glue, which emit excellent reflection during night time, with 3 reflective strips of colour Amber, Red or White, as approved by GE and duly embedded in PCC 1:2:4, Type B1 of suitable size fixing MS Post and earthwork etc. complete all as specified and as directed.\n\n | BI01010001010000000000000515BI0100001162 | 20 | Each |
53 | 53 | Rolling and consolidating formation surfaces in cutting by using power road roller of 8 to 12 ton capacity complete all as specified and as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001163 | 180 | 10 Square Metre |
54 | 54 | M & L for Forming Expansion Joint, 12mm thick, filled with Preformed Bituminous Filler and top 30mm Primed and sealed with Sealing Compound Grade "A" for 150mm thick flooring complete all as specified and directed. | BI01010001010000000000000515BI0100001164 | 10 | 10 Running Metre |
55 | 55 | M & L for Forming Contraction Joint [Dummy], 65mm deep X 10mm wide, filled with sealing compound and sealed with Sealing Compound Grade "A" for 150mm thick flooring complete all as specified and directed. | BI01010001010000000000000515BI0100001165 | 70 | 10 Running Metre |
56 | 56 | Supplying and laying GI Water Tubing of 50 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc. fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. | BI01010001010000000000000515BI0100001166 | 100 | Running Metre |
57 | 57 | S & F Gun Metal Globe or Gate Valve of Class - I Pressure Tested of 1.5 Mpa, 50 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed. | BI01010001010000000000000515BI0100001167 | 6 | Each |
58 | 58 | Supplying and laying GI Water Tubing of 32 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc. fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed. | BI01010001010000000000000515BI0100001168 | 150 | Running Metre |
59 | 59 | S & F Gun Metal Globe or Gate Valve of Class - I Pressure Tested of 1.5 Mpa, 32 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed. | BI01010001010000000000000515BI0100001169 | 6 | Each |
60 | 60 | Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Harde / Dense soil complete all as specified and as directed. | BI01010001010000000000000515BI0100001170 | 295 | Cubic Metre |
61 | 61 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. | BI01010001010000000000000515BI0100001171 | 48 | Cubic Metre |
62 | 62 | Removal of excavated material [Soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. | BI01010001010000000000000515BI0100001172 | 250 | Cubic Metre |
63 | 63 | M & L for PCC 1:3:6, Type C-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed. | BI01010001010000000000000515BI0100001173 | 58 | Cubic Metre |
64 | 64 | M & L for Providing Precast Cement Concrete Solid Block Masonry of 1:3:6, Type C1 using 20mm graded stone aggregate exceeding 100mm width with plain or interlocking joints set in cement mortar 1:6 complete all as specified and as directed. | BI01010001010000000000000515BI0100001174 | 84 | Cubic Metre |
65 | 65 | M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. | BI01010001010000000000000515BI0100001175 | 576 | Square Metre |
66 | 66 | M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in Coping and the like including weathering, slightly rounded or chamfered angles and throating including [straight or curved] complete all as specified and directed. | BI01010001010000000000000515BI0100001176 | 26 | Cubic Metre |
67 | 67 | M & L for forming fair finished drain or channel of any inner girth using extra cement including forms, moulds, mitred / stooped ends complete all as specified and as directed. | BI01010001010000000000000515BI0100001177 | 320 | Running Metre |
68 | 68 | M & L for providing RCC M-20 Design Mix using 20mm graded stone aggregate as in Precast Landings, Cover Slabs [for manholes etc], Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed. | BI01010001010000000000000515BI0100001178 | 3 | Cubic Metre |
69 | 69 | Excavation in post holes each not exceeding 0.5 Cu.m, getting out in Hard / Dense soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. | BI01010001010000000000000515BI0100001179 | 90 | Each |
70 | 70 | Use and removal of steel formwork to sides of pillars, posts, struts, piers, columns and stanchions of any shape / cross section for fair finished surfaces of concrete complete all as specified and as directed. | BI01010001010000000000000515BI0100001180 | 38 | Square Metre |
71 | 71 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. | BI01010001010000000000000515BI0100001181 | 159 | Kilogram |
72 | 72 | M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed. | BI01010001010000000000000515BI0100001182 | 148 | Cubic Metre |
73 | 73 | S & F Rolled Mild Steel work conforming to Fe 410-W, Grade-E- 250, Quality-A as in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings [exclusive of steel sheeting or other covering, running rails and guides] and hanging, also fastening and fixing complete all as specified and as directed. | BI01010001010000000000000515BI0100001183 | 400 | Kilogram |
74 | 74 | S & F Mild Steel work conforming to Fe - 290, Grade E-165 as in Hand Rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for Balusters Running Bars, for Doors, Balusters, Nosing to Steps including embedding in concrete and screwing etc., Wind Ties for roof including securing bolts, Posts and Struts in Fencing including cutting tops to shape as directed, bending to shape, notching for wire, drilling holes or as in flat iron fillets [for securing wire mesh and barbed wire etc.] including all necessary drilling, bolting or riveting, etc. and similar work complete all as specified and directed. | BI01010001010000000000000515BI0100001184 | 7279 | Kilogram |
75 | 75 | S & F MS machine made screw bolts with hexagonal or square head one end and screwed other or screwed both ends, fitted with washers and one hexagonal or square nut exceeding not exceeding 5 cm long, dia of neck exceeding 5 mm but not exceeding 10 mm complete all as specified and as directed. | BI01010001010000000000000515BI0100001185 | 23 | Kilogram |
76 | 76 | S & F PVC Coated Chain Link MS Galvanised Fencing Mesh of size 50 mm X 50mm, 4mm dia wire with minimum 1 mm thick PVC Coating and of weight not less than 4.5 KG / Sq.m including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. | BI01010001010000000000000515BI0100001186 | 1890 | Square Metre |
77 | 77 | M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. | BI01010001010000000000000515BI0100001187 | 379 | Square Metre |
78 | 78 | M & L for preparation of newly plastered wall surfaces and applying two coats of Cement Based paint over a coat of Alkali Resistant Primer complete all as specified and as directed. | BI01010001010000000000000515BI0100001188 | 1890 | Square Metre |
79 | 79 | Taking down carefully copper / aluminium point wiring [light, fan, socket or power] complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed. | BI01010001010000000000000515BI0100001189 | 10 | Point |
80 | 80 | M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type and Pressed Metal Flush Box made out of 2mm thick MS Sheet of suitable size and 3 mm thick Hylam Sheet top cover for fixing switches, fittings, regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified and as directed. | BI01010001010000000000000515BI0100001190 | 6 | Point |
81 | 81 | All as per Serial Item No. 81 above but One 3 Pin Switch Socket Outlet 5 Amps on Independent Board complete all as specified. | BI01010001010000000000000515BI0100001191 | 4 | Point |
82 | 82 | S & F Switch Piano, Flush Button, Single Pole, One Way, 5 Amps, 230 Volts complete all as specified and as directed. | BI01010001010000000000000515BI0100001192 | 6 | Each |
83 | 83 | S & F Ceiling Rose, Surface Bakelite, 65 X 50 mm, Three Terminals, 230 Volts complete all as specified and as directed. | BI01010001010000000000000515BI0100001193 | 6 | Each |
84 | 84 | S & F Switch Socket Outlet, 3 & 2 Pin, Multipurpose, 5 Amps, 230 Volts, Flush Type complete all as specified and as directed. | BI01010001010000000000000515BI0100001194 | 4 | Each |
85 | 85 | S & F Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 1800 Lumens output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing Fluorescent tube light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 | BI01010001010000000000000515BI0100001195 | 4 | Each |
86 | 86 | S & F Energy efficient LED Flood Light fitting, of not less than 10000 Lumens output, 6500 K, with Pressure Die Cast Aluminium Housing, IP65 Protection and Surge Protection device of 10 KV, Heat resistant Toughened Glass Cover, high power LEDs as light source, electronic driver and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 | BI01010001010000000000000515BI0100001196 | 8 | Each |
87 | 87 | M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old sub main wiring of any description and making good disturbed surface complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit | BI01010001010000000000000515BI0100001197 | 150 | Running Metre |
88 | 88 | M & L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old sub main wiring of any description and making good disturbed surface complete all as specified and as directed. Note: 3 runs of 6 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit | BI01010001010000000000000515BI0100001198 | 120 | Running Metre |
89 | 89 | S & F Electronic Fan Regulator, Stepped Type, Modular Type, One Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed. | BI01010001010000000000000515BI0100001199 | 2 | Each |
90 | 90 | S & F in repairs MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, IP-42 rated, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified and as directed. | BI01010001010000000000000515BI0100001200 | 2 | Each |
91 | 91 | S & F MCB, SPN, 40 to 63 Amps, 10 KA, B Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. | BI01010001010000000000000515BI0100001201 | 2 | Each |
92 | 92 | S & F MCB, SP, 6 to 32 Amps, 10 KA, B Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. | BI01010001010000000000000515BI0100001202 | 12 | Each |
93 | 93 | Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. and disconnecting and taking down existing Earthing of any description complete all as specified and as directed. | BI01010001010000000000000515BI0100001203 | 2 | Each Job |
94 | 94 | Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. and disconnecting and taking down existing Earthing of any description complete all as specified and as directed. | BI01010001010000000000000515BI0100001204 | 4 | Each Job |
95 | 95 | S & F in repairs Aluminium Strip of size 25 X 3 mm, fixed to walls / columns / beams etc with Saddles or porcelain blocks of 10mm thick spaced at 1.00m centre to centre including making grooves and fixing with brass screws etc. for roof conductors and down conductors above ground complete all as specified and as directed. Note: Hylam sheet block shall be in two pieces each 10mm thick, one fixed to base with brass screws and the other fixed over it with brass screws after fixing aluminium strip in the groove provided. | BI01010001010000000000000515BI0100001205 | 150 | Running Metre |
96 | 96 | S & F in repairs Earth continuity Conductor or main earthing lead made of GI Strip of size 25 X 4mm, fixed to wall on batten or recess or chases or burried in ground or fixed to poles or any other indicated situation including drawing through GI Pipe for earthing etc. complete all as specified and as directed. | BI01010001010000000000000515BI0100001206 | 50 | Running Metre |
97 | 97 | S & F in repairs Single Pointed Air Termination Aluminium Rod, 12 mm dia and 300 mm long including necessary fasteners fixed for Lighting Protection with necessary connections to earthing etc complete all as specified and as directed. | BI01010001010000000000000515BI0100001207 | 4 | Each |
98 | 98 | S & F in repairs Test Point Terminal Box of size 200 X 100 X 100mm made out of 2mm thick hot dip galvanised sheet, drilled and screwed including 6 Nos 15mm long hexagonal head screws complete with Test Point Terminal Block made of Gun Metal or Phosphorus Bronze of size 75 X 75 X 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw complete all as specified and as directed. | BI01010001010000000000000515BI0100001208 | 4 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail