Medical Health And Family Welfare has published Construction Of Oxygen Generation Plant Room At District Hospital , Dausa. Submission Date for this Tender is 26-04-2021. Building Work Tenders in DAUSA Rajasthan. Bidders can get complete Tender details and download the document.
Name of Work: Construction of Oxyzen Generation Plant Room at District Hospital, Dausa | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | PART - A | BI01010001010000000000000515BI0100001112 | ||
2 | 1.1 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001113 | 15 | Cum |
3 | 2 | Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 :Upto 15 cm. thick. | BI01010001010000000000000515BI0100001114 | 0.3 | Cum |
4 | 3 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. | BI01010001010000000000000515BI0100001115 | 203 | Sqm |
5 | 4 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.\n New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). | BI01010001010000000000000515BI0100001116 | 203 | Sqm |
6 | 5 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : \nTwo or more coats on new work | BI01010001010000000000000515BI0100001117 | 161 | Sqm. |
7 | 6 | Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design. (Clear openable area to be measured for payment). | BI01010001010000000000000515BI0100001118 | 7.5 | Sqm |
8 | 7 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. | BI01010001010000000000000515BI0100001119 | 2 | Cum |
9 | 8 | Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks \nCement Mortar 1:6 ( 1-Cement : 6-Sand). | BI01010001010000000000000515BI0100001120 | 4 | Cum |
10 | 9 | Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification : | BI01010001010000000000000515BI0100001121 | 10 | Sqm |
11 | 10 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide | BI01010001010000000000000515BI0100001122 | 1460 | Kg |
12 | 11 | Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size.\nWelded mesh 25 mmx 25 mm x 2.1 mm | BI01010001010000000000000515BI0100001123 | 73 | Sqm |
13 | 12 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. \n1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | BI01010001010000000000000515BI0100001124 | 12 | Cum |
14 | 13 | M20 grade Nominal Mix. 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001125 | 13 | Cum |
15 | 14 | Random rubble dry stone Kharanja under floor. | BI01010001010000000000000515BI0100001126 | 10 | Cum |
16 | 15 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.\n3.0mm thick (Wt. 5.0 Kg./Mtr. Sq.) | BI01010001010000000000000515BI0100001127 | 73 | Sqm |
17 | 16 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: | BI01010001010000000000000515BI0100001128 | 4500 | Kg |
18 | 17 | bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as\nrequired.Gr 1 | BI01010001010000000000000515BI0100001129 | ||
19 | 17.1 | Short point (up to 3 mtr.) | BI01010001010000000000000515BI0100001130 | 3 | P. point |
20 | 17.2 | Medium point (up to 6 mtr.) | BI01010001010000000000000515BI0100001131 | 10 | P. point |
21 | 17.3 | Long point (up to 10 mtr.) | BI01010001010000000000000515BI0100001132 | 6 | P. point |
22 | 18 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate,\nscrews, making connections, testing etc. as required.Gr 1 | BI01010001010000000000000515BI0100001133 | ||
23 | 18.1 | On board | BI01010001010000000000000515BI0100001134 | 2 | P. point |
24 | 19 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.Gr 1 | BI01010001010000000000000515BI0100001135 | 4 | Each |
25 | 20 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections\netc. as required.G1 | BI01010001010000000000000515BI0100001136 | ||
26 | 20.1 | 2 x 2.5 sq. mm. + 1x1.5sqmm | BI01010001010000000000000515BI0100001137 | 30 | Mtr. |
27 | 20.2 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. | BI01010001010000000000000515BI0100001138 | 35 | Mtr. |
28 | 21 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DB\nterminations with copper lugs , testing etc. as required.G1 | BI01010001010000000000000515BI0100001139 | ||
29 | 21.1 | Double door (single phase) | BI01010001010000000000000515BI0100001140 | ||
30 | 21.2 | 12 way | BI01010001010000000000000515BI0100001141 | 1 | Each |
31 | 22 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs,\ntesting etc. as required.GROUP 1 | BI01010001010000000000000515BI0100001142 | ||
32 | 22.1 | Single pole MCB | BI01010001010000000000000515BI0100001143 | ||
33 | 22.2 | 6 A to 32 A rating | BI01010001010000000000000515BI0100001144 | 6 | Each |
34 | 22.3 | Double pole MCB | BI01010001010000000000000515BI0100001145 | ||
35 | 22.4 | 40-63 A | BI01010001010000000000000515BI0100001146 | 1 | Each |
36 | 23 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required.GROUP 1 | BI01010001010000000000000515BI0100001147 | ||
37 | 23.1 | 25 mm | BI01010001010000000000000515BI0100001148 | 50 | R. mtr. |
38 | 24 | P & F phenolic laminated sheet 2.0 mm thick of size 75 mm dia. Including screws, cup washer as required. | BI01010001010000000000000515BI0100001149 | 5 | Each |
39 | 25 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required | BI01010001010000000000000515BI0100001150 | ||
40 | 25.1 | 5 step fan regulator 2 ModuleGr 1 | BI01010001010000000000000515BI0100001151 | 4 | Each |
41 | 26 | P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . | BI01010001010000000000000515BI0100001152 | 4 | Each |
42 | 27 | P&F of Heavy duty capacitor start 900/1400 RPM single\nphase ISI marked Exhaust fan,IS:2312 marked in\nexisting opening including making connections testing etc. as required.GROUP 1 | BI01010001010000000000000515BI0100001153 | ||
43 | 27.1 | 300 mm sweep(900/1400 RPM) | BI01010001010000000000000515BI0100001154 | 2 | Each |
44 | 28 | P & F of Gravity Louver shutter of superior quality made out of frame of 18 swg M.S. sheet & Louvers made from 24 swg MS Sheet with enamel paint including cost of nuts, bolts, etc as reqd. | BI01010001010000000000000515BI0100001155 | ||
45 | 28.1 | Up to 380 mm size | BI01010001010000000000000515BI0100001156 | 2 | Each |
46 | 29 | batten made from CRCA sheet steel suitable to replace T- B/T-12 tube light, integral driver, 2000 luman + 5olo tolerarrce system luman efficiacy of 100 Lm/ watt minimum expected life time of 25000 burning hours, CCT 5700 I( ANSI, CRI 80, driver efficiency >850/o, Life expectancy of driver rnin 30000 hrs. PF 0,95 at full\nload/ 230 volt AC.Gr 1 | BI01010001010000000000000515BI0100001157 | 8 | Each |
47 | 30 | P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm sweep Gr 1 | BI01010001010000000000000515BI0100001158 | 4 | Each |
48 | 31 | P/Laying P.V.C. insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I of Group2of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.GROUP 1\n(armoured) In existing RCC/HUME/STONEWARE PIPE | BI01010001010000000000000515BI0100001159 | ||
49 | 31.1 | 10.0 Sq.mm | BI01010001010000000000000515BI0100001160 | ||
50 | 31.2 | 2 core | BI01010001010000000000000515BI0100001161 | 50 | Mtr. |
51 | 32 | S & Laying following size earth wire/strip in horizontal\nor vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as\nrequired. | BI01010001010000000000000515BI0100001162 | ||
52 | 32.1 | 8 SWG copper wire | BI01010001010000000000000515BI0100001163 | 10 | Mtr. |
53 | 32.2 | 25 mm Dia. | BI01010001010000000000000515BI0100001164 | 2 | Mtr. |
54 | 33 | Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS -113C of approved make in existing surface or recessed conduit/casing capping. | BI01010001010000000000000515BI0100001165 | ||
55 | 33.1 | Unarmoured Telephone cable in existing surface or\nrecessed conduit/casing capping. | BI01010001010000000000000515BI0100001166 | ||
56 | 33.2 | 2 pair | BI01010001010000000000000515BI0100001167 | 100 | Mtr. |
57 | 34 | P & F ISI marked flush type single line telephone jack including making connection testing etc. as required. | BI01010001010000000000000515BI0100001168 | 1 | Each |
58 | 35 | Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required | BI01010001010000000000000515BI0100001169 | 100 | Mtr. |
59 | 36 | Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required | BI01010001010000000000000515BI0100001170 | 1 | Each |
60 | 37 | Supply & fixing of Faceplate for Flush / Surface Mount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm | BI01010001010000000000000515BI0100001171 | ||
61 | 37.1 | Single Aperture | BI01010001010000000000000515BI0100001172 | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail