Public Works Department-PWD has published Jjm Sch Const Of 1 ( One ) No. Semi Permanent Pump House, Laying Of Distribution System, Installation Of Punp Motor Fhtc, Etc. At Subarna Para Under Barabil Vc Of Silachari R.D Block Under Dws Sub-Division, Karbook During The Year 2020-21.. Submission Date for this Tender is 11-05-2021. Motor Work Tenders in Karbook Tripura. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by mechanical means(Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.- All kinds of soil |
2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.- All kinds of soil |
3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering : - All work upto plinth leveli) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
5 | ii) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
6 | First class brick work in foundation and plinth including cost of all materials as required complete:-A) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
7 | Extra for brick masonry work in triangular, square and rectangular pillars including cost of all materials as required complete. |
8 | Half brick masonry with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above level. i) TMT bars og grade Fe-500D or more. |
10 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth levelA) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- A) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- (A)1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
13 | Centering shuttering including struttings, propping etc. and removal of form work for: i)Foundations, footings, bases for columns etc. for mass concrete with timber plank. |
14 | ii) Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank |
15 | iii) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
16 | iv) Weather shade, Chajjas, corbels etc., including edges. |
17 | Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size).i ) D.P.C. 50 mm thick |
18 | 12 mm cement plaster of mix.i) In cement mortar 1 : 4 (1 cement : 4 fine sand ) |
19 | 6 mm cement plaster of mix.i) In cement mortar 1 : 4 (1 cement : 4 fine sand ) |
20 | Neat cement punning |
21 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture :i) New work ( two or more coats applied @ 3.84kg/10sqm). |
22 | Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete. i) Water thinnable cement primer. |
23 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc ) trusses etc.includng cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete.i) Hot finished welded type tubes |
24 | Providing and fixing M.S. round holding down bolts with nuts and wahser plates complete as per standard design. |
25 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required....A) 0.63 mm thick with zinc coating not less than 275gm/m2. |
26 | Providing ridges or hips of width 60 cm over all in plain G.S. fixed with polymer coatedJ or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washerscomplete. i) 0.63 mm thick with zinc coating not less than 275 gm /m2 |
27 | Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. complete. i) 40 mm thick with 20 mm well burnt brick aggregate. |
28 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:- i) Using flats 30x6mm for diagonal braces and central cross piece. |
29 | Finishing with Epoxy paint ( two or more coats) of approved brand and manufacture at all locations prepared and applied as per manufacturer"s specification including appropriate priming coat, preparation of surface etc. complete.i) On steel work |
30 | providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. i) Fixed to steel windows by welding. |
31 | Providing and Placing of G.I. pipe over the pump house on top portion of the RCC column as per specification and direction of the Engg-in-charge.i) 150 mm dia. |
32 | ii) 125 mm dia |
33 | Providing & fitting fixing of sign board( size 1.00x0.75m) at water supply scheme in/c cost of 1mm thick plain aluminium of GI sheet with necessary MS angle(40x40x5mm) in/c necessary bending and fixing on the GCI walling of pump house and painting, writing, nails, spikes etc and carrying to ther worksite complete as per direction of the Er-in-charge. |
34 | Supplying of armed plastic chair( Supreme make) at water supply scheme. |
35 | Providing and fixing soft wood(chamal)Eve board 25 mm thick and 225 mm wide in/c paiting two coats completed as per direction of the Engg-in-charge. |
36 | Excavating trenches of required width for pipes,cables, etc. in/c excavation for sockets, dressing of sides where required, rammingof bottoms, depth up to 1500 mm (slope-1 in 200) in/c getting out the excavated soil and bacfilling of soil as required after laying of pipeline, in layer not exceeding 200 mm in depth in/c consolidating each deposited layer by ramming, watering etc and disposing of surplus excavated soil with all required leads as per chapter-2 CPWD specification and direction of the Er-in-charge.... A) For UPVC in new work.i)For pipes not exceeding 90mm dia. |
37 | ii)For pipes exceeding 90 mm dia. but not exceeding 300 mm dia. |
38 | B) CI/DI/GI/DI pipes in new work:i)For pipes exceeding 90 mm dia. But not exceeding 300 mm dia. |
39 | Providing, fixing and laying rigid UPVC pipes jointing conforming to IS: 4985 with couplers, of same class conforming to IS: 14182 in/c. testing of joints complete(ex/c the cost of specials like bends, tees, etc which will paid separately) as per CPWD specification and direction of the Er.-in charge.A) Class 3( Working pressure 6.0kg/cm2 ( i ) 40 mm OD |
40 | ii) 50 mm dia. |
41 | iii) 90 mm dia. |
42 | iv) 110 mm dia. |
43 | v) 140 mm dia. |
44 | Charges for laying S & S centrifugally cast(spun) Ductile Iron(DI) class-7 pipes conforming to IS: 8329 as per CPWD specification and direction of the Er-in-charge. i) 100 mm dia |
45 | ii) 125 mm dia |
46 | iii) 150 mm dia |
47 | Providing and laying of flexible PVC pipeconforming to IS: 7634 ) complete as per specification and direction of the including testing of joints complete as per CPWD specification and direction of the Engineer-in charge(cost of earth work and fittings will be paid separately). i) 15 mm dia |
48 | ii) 25 mm dia |
49 | Providing and fixing DI specials as per chapter 20 of CPWDspecification and direction of the Engg-in-charge….. i) Upto 300 mm dia.A)D.I. all socketed tee:i) 150 x 150 x 100 mm dia. |
50 | ii) 150 x 150 x 150 mm dia. |
51 | B) D.I. Flanged Socketted tail piece. i)150 mm dia. |
52 | C) D.I. Flanged Spigotted tail piece.i) 150 mm dia. |
53 | D) D.I. all Socketed Bend 45 degree.i) 150 mm dia. |
54 | Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS:10124(part 8/9/10/11/12/13) with solvent cement conforming to IS: 14182 including testing of joints complete as per CPWD specification and direction of the Engg-in charge. i) 40 mm dia |
55 | ii) 50 mm dia |
56 | iii) 90 mm dia |
57 | iv) 110 mm dia |
58 | v) 140 mm dia |
59 | Providing, fixing and laying fabricated UPVC socket/ coupler conforming to IS:10124(part 2) with solvent cement conforming to IS: 14182 including testing of joints complete as per CPWD specification and direction of the Engg-in charge. i) 90 mm dia |
60 | ii) 110 mm dia |
61 | iii)140 mm dia |
62 | Providing, fixing and laying fabricated UPVC end cap conforming to IS:10124(part 4) with solvent cement conforming to IS: 14182 including testing of joints complete as perCPWD specification and direction of the Engg-in charge. i) 90 mm dia |
63 | ii) 110 mm dia |
64 | iii) 140 mm dia |
65 | Providing, fixing and laying fabricated UPVC equal tee conforming to IS:10124(part 5) with solvent cement conforming to IS: 14182 including testing of joints complete as per CPWD specification and direction of the Engg-in-charge. i) 90 x 90 mm dia |
66 | ii) 110 x 110 mm dia |
67 | iii) 140 x 140 mm dia |
68 | Providing, fixing and laying fabricated UPVC straight reducer conforming to IS:10124(part 3) with solvent cement conforming to IS: 14182 including testing of joints complete as per CPWD specification and direction of the Engg-in charge.i) 50 x 40 mm dia |
69 | ii) 110 x 90 mm dia |
70 | iii) 140 x 110 mm dia |
71 | iii) 160 x 140 mm dia |
72 | Providing, fixing and laying flanged fabricated UPVC tailpiece with MS flange ( 8mm thiak) conforming to IS:10124 (part 6) with solvent cement conforming to IS: 14182 including testing of joints complete as per CPWD specification and direction of the Engg-in-charge.i) 90 mm dia |
73 | ii) 110mm dia |
74 | iii) 140 mm dia |
75 | Making road crossing by horizontal boring for smooth laying of UPVC/CI/DI/GI pipes etc. of required dia complete as per chapter 20 of CPWD specification and direction of the Engineer-in-charge. i) By manual means |
76 | Charges for making hole by drilling and making thread by thread bit in the C.I. / D.I. pipe as perspecification and direction of the Engineer-in-charge.i) 10 mm dia nominal bore |
77 | ii) 15 mmnominal bore. |
78 | Providing and fixing brass ferrule with CI cover conforming to IS: 2692 in/c boring and tapping the main as per CPWD specification and direction of the Er-in-charge. i) 10 mmnominal bore. |
79 | ii) 15 mmnominal bore. |
80 | Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer-in-charge. i)100 x 80mm dia |
81 | ii) 150 x 80 mm dia |
82 | Providing and fixing C.I. sluice valves(with cap) complete with bolts, nuts, rubber insertions etc.(the tail pieces if required will be paid separately) as per CPWD specification and direction of the Engg in-charge. i) 100 mm dia (PN- 1.0 ) |
83 | ii) 125 mm dia (PN- 1.0) |
84 | iii) 150 mm dia (PN- 1.0) |
85 | Constructing masonry chamber 120x120x100 cm, inside with brick work in cement mortar 1:4(1 cement:4 fine sand) for sluice valve, with surface box 100 mm top dia. 160 mm bottom dia and 180 mm deep (inside) with chained lid and RCC top slab1:2:4(1 cement: 2 fine sand:4 brick aggtt. 1st class 20 mm n/s) necessary excavation foundation concrete1:5:10(1 cement:5 fine sand:10 brick aggtt. 1st class 40 mm n/s) and inside plastering with cement mortar1:3(1 cement:3 fine sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Er-in-charge.. .A) With 1st class bricks |
86 | Providing and fitting fixing PVC/plastic bib cock conforming to IS:9763 in hydrants points at different locations as per CPWD specification and direction of the Er-in-charge. i) 15 mmdia plastic bib cock. |
87 | Providing and fitting fixing G.I. Nipple as per CPWD specification and direction of the Er-in-charge. i) 15 mm dia 75mm long. |
88 | Providing and fitting fixing G.I. bend/elbow in the pipe line incliding testing of joints complete as per CPWD specification and direction of the Er-in-charge. i) 15 mm dia. |
89 | Providing and fitting fixing G.I. socket as per CPWD specification and direction of the Er-in-charge.i) 15 mm dia. |
90 | Providing and fitting fixing G.I. union as per CPWD specification and direction of the Er-in-charge. i) 15 mm dia. |
91 | Providing and fixing G.I. pipes of medium class as per IS: 1239 with latest amendment complete with G.I. fittings and clamps including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer-in-charge.A) External work(i ) 40 mm dia. nominal bore |
92 | Supplying of 5000 GPH and 10 HP, 76 mtrs. head water lubricated submerssible pump motor set of maximum 150mm outer dia with maximum 10 (ten ) stages coupled with required water and non-over loading submersible motor suitable for 340-440 volts, 3-ph. 50Hz, A.C. supply and star delta method of starting, along with 35 mtrs 1x 2 x 3 x 10 sqm joint less PVC 3 ( Three) core double length flat cable ( continuous length ) of suitable size fitted with submersible motor, suction case, stainer, coupling key, vertical non-return valve cum discharge case in/c supplying of 10 nos. suitable cable guard with clips and nuts & bolts, 2 (Two) pair M.S. column clamps as per direction of Engineer-in-charge conforming to terms & conditions of the contract ( each pump with motor shall consist of stainless steel closed type impeller, C.I. bowl, C.I. discharge case, pump shaft ( stainless steel), bush ( Bronze) shaft sleeve (Bronze/chromium ) sand guard widening, rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes, ( GI flange, GI Column pipe will be issued by deptt. at free of cost) ) |
93 | Providing and fitting fixing of 7500 GPH and 15HP capacity 76 mtr. head minimum 3 star ratting,water lubricated submerssible pump motor set of maximum 150/200mm outer dia with maximum 7 (seven ) stages coupled with required weter and non-over loading submersible pump motor suitable for 340-440 volts, 3-ph. 50Hz, A.C. supply and star delta method of starting, along with 35 mtrs1 x 2 x 3 x 10.0 sqmm jointless PVC 3 ( Three) core double length flat cable (continuous length ) of suitable size fitted with submersible motor, suction case, stainer, coupling key, vertical non-return valve cum discharge case in/c supplying of 10 nos. suitable cable guard with clips and nuts & bolts, 2 (Two) pair M.S. column clamps in/c. installation of submersible pump & motor upto the depth of 100 ft. by G.I. pipe (conforming to IS:1239 medium class)conforming to terms & conditions of the contract ( each pump with motor shall consist of stailess steel closed type impeller, C.I. bowl, C.I. discharge case, pump shaft ( stainless stell), bush ( Bronze) shaft sleeve (Bronze/chromium ) sand guard widening, rotor, stator, counter thrust plate, thrust plate, thrust bearing segment etc. conforming to relevant BIS codes).( GI flange, GI Column pipe will be issued by deptt. at free of cost) ) |
94 | Providing and fitting fixing of moving iron type, range 0 - 100 /0-200 amps, 96mm x96 mm size AC Amps meter direct reading type (L&T/AE make) with selector switch and CT coil as a electrical instrument of the panel board as per specification anddirection of the Er-in-charge. |
95 | Providing and fitting fixing of moving iron type, range 0 - 500 V, 96 mmx96 mm size AC Volt meter (L&T/AE make) with selector switch as a electrical instrument of the panel board as per specification anddirection of the Er-in-charge. |
96 | Providing and fitting fixing of steel sheet enclose switch fuse unit( suitable for DIN fuses), tripple pole with neutral link(TPN), 415/500 volt, L&T/Havels/BCH make etc complete as per specification anddirection of the Er-in-charge. i) 100 amps |
97 | Providing and fitting fixing of Fully Automatic star Delta type Motor Starter(3 ph. 50Hz, 415V, ) in steel sheet enclosure with Contractor and Timers etc complete suitable for submerssible pump, L&T,BCH,ABB makeas per specification anddirection of the Er-in-charge.i) 25 HP/18.5 kw Relay range within 13-21 + 10% |
98 | Providing and fitting fixing of Moulded Case Circuit Breaker(MCCB) of different Thermal release range415 + volt, 50 Hz ( L&T,BCH, ABB make ) as per specification anddirection of the Er-in-charge.i) 32 - 40 Amps |
99 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS: 694 for inter connection with all electrical equipments of the pannel boardas per specification anddirection of the Engineer-in-charge. i) 16 sqmm |
100 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch( thickness) Gamair wood/ ply wood panel board for fitting fixing of electrical items, in/c 2 nos. MS angle post( size 2 inch x 2 inch x 9 feet), nuts & bolts etc for errection of the same by 1:1.5:3 cement conrete casting(1 feet x 1 feet x 2 feet) below the ground level and paintint two or more coats and plastic paintas per specification anddirection of the Er-in-charge. |
101 | Providing and fitting fixing C.I. non-return valve of approved quality as per clauses of chapter-1 CPWD specification and direction of the Er-in-charge….i) 80 mm dia |
102 | ii) 100 mm dia |
103 | Providing earthing with perforated 40 mm dia GI pipe(medium class)(12 mm dia perforation), laying of 4 mm dia GI wire from earth electrode to panel, includingexcavating hole of 600 mm dia and refilling withsalt and charcoal/coke in alternate layers of 300 mm, as per standard specification and direction of the Er.-in-charge.i) for 3-phase connection with 4.00 mtr long G.I. pipe |
104 | Providing and fitting fixing single phasing preventor +selectable under voltage +selectable over voltage on delay 5 sec. & off delay 15 sec phase asymmetry 10% L & T/ BCH/HAVELS/SIEMENS etc. make complete as per specification and direction of the Engineer-in-charge. |
105 | Providing and fitting fixing 3 phase indicating lamp fitted with panel board with different colour lamps with batten holder complete as per specification and direction of the Engineer-in-charge. |
106 | Supplying of ISI mark/taparia make tools for different water supply schemes. i) Sly Wrench (12"") |
107 | ii) Screw Driver(star shape) |
108 | iv) PipeWrench ( 18"" ) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail