Military Engineer Services-MES has published Special Repair To Bldg No . P-140 ( Nine Qtrs ) Of F Comp Sig Regt And Bldg No Lt-09 And Bt-19 Of Hq 101 Area ( Est ) At Shillong Cantt Area Spl Rep To Bldg No . P-140 ( Nine Qtrs ) Of F Comp Sig Regt And Bldg No Lt-09 And Bt-19 Of Hq 101 Area (. Submission Date for this Tender is 01-05-2021. Building Repair Tenders in SHILLONG Meghalaya. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 24-Apr-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-05-2021 |
Name of Work: Name of Work: SPL REP TO BLDG NO. P-140 (NINE QTRS) OF F COMP SIG REGT ABD BLDG NO LT-09 AND BT-19 OF HQ 101 AREA (EST) AT SHILLONG CANTT AREA UNDER GE SHILLONG | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Dismantling of plain or corrugated steel sheeting any guage thickness including Nainital or similar pattern roof covering complete all as specified and directed. | 970 | SQM | |
2 | 2 | Dismantling of timber scantling 40 Sqcm and over in section in any position (unframed work) complete all as specified and directed. | 1.77 | CUM | |
3 | 3 | All as per item No 2.00 here in above but in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section complete all as specified and directed. | 40 | RM | |
4 | 4 | Dismantling of wall/ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed. | 280 | SQM | |
5 | 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete. | 880 | SQM | |
6 | 6 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc in floors and laid bedded and pointed in any mortar including removing rubbish off the premises complete all as directed by Engineer-in- Charge. | 15.2 | X SQM | |
7 | 7 | Demolition of Cement Concrete of any description ( reinforced) and in any position not otherwise specifically provided for etc complete all as specified and directed by Engineer-in-Charge. | 3.9 | CUM | |
8 | 8 | Demolition of Cement Concrete of any description in any position not otherwise specifically provided for etc complete all as specified and directed by Engineer-in-Charge. | 3.5 | CUM | |
9 | 9 | Demolition of brick or solid concrete block walling built in cement mortar etc complete all as specified and directed. | 4.4 | CUM | |
10 | 10 | Taking down Chowkhats or frames n.exc 1.5 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as specified and directed. | 30 | EACH | |
11 | 11 | Taking down Chowkhats or frames exc 1.5 Sqm but n.exc 4 Sqm each but with shutters (without taking off shutters from the frame) including builders hardware each complete all as specified and directed. | 25 | EACH | |
12 | 12 | Taking down shutters of any description n. exc. 1 Sqm resecuring or easing & adjusting refixing in same opening complete all as specified and directed. | 15 | EACH LEAF | |
13 | 13 | Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm resecuring or easing & adjusting refixing in same opening complete all as specified and directed. | 35 | EACH LEAF | |
14 | 14 | Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each and removing from site complete all as specified and directed. | 15 | EACH LEAF | |
15 | 15 | Taking down shutters of any description n. exc. 1 Sqm each and removing from site complete all as specified and directed. | 21 | EACH LEAF | |
16 | 16 | Taking down cement plaster on brick or concrete surfaces in anyposition including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed by Engineer-in-Charge. | 350 | SQM | |
17 | 17 | M&L for Pre-cast RCC 1:2:4 type B1, ( using 20 mm graded stone aggregates) as in cover slab, shelves and similar articles with plain faces and set in cement sand mortar 1:6 including necessary formwork and mould including demolition of old unserviceable one etc complete all as specified and as directed by Engr-in-charge. | 0.9 | CUM | |
18 | 18 | M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed by Engineer in Charge. | 80 | KG | |
19 | 19 | S&F mild steel Framed work as in grills/guard bars etc with ends of bar shouldered/inserted in to wooden frames complete all as specified and directed by Engineer-in-Charge.\n | 90 | KG | |
20 | 20 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts,hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge. | 25 | KG | |
21 | 21 | M&L PCC type B1 ( 1:2:4, using 20mm graded crushed stone aggregates) as in roof kerbs, sloping padding in roof slab or mud stops round or chamfered on edges, haunching , benching and anchorage block etc including necessary formwork etc complete all as specified and as directed. | 0.24 | CUM | |
22 | 22 | M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engineer in Charge. | 50 | Sqm | |
23 | 23 | M&L for 25mm PCC 1:2:4 type B-0 ( using 12.5mm graded crushed stone aggregates) as in sub base of floor , finishing the cement concrete surfaces even etc complete all as specified and directed by Engineer-in-Charge.\n | 50 | SQM | |
24 | 24 | M&L 75mm thick PCC, type C2, (1:3:6, using 40 mm graded stone aggregates) as in floor, hardstanding and plinth protection and finishing the cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed. | 255 | SQM | |
25 | 25 | M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, exc 10 Cm width and setting in cement sand mortar 1:6 complete all as specified and directed.\n | 2 | Cum | |
26 | 26 | M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete (1:3:6) type C1, using 20 mm graded stone aggregate, 10 Cm width and setting in cement sand mortar 1:6 complete all as specified and directed.\n | 12 | Sqm | |
27 | 27 | M&L for 2nd class hard wood as in scantling, clean sawn, timber fixed complete all as specified and directed. | 1.77 | CUM | |
28 | 28 | M&L 2nd class hard wood plain fillets square rectangular or triangular in section clean sawn secured with nails or brads sectional area exc 13 sqcm n exc 25 sqcm complete all as specified and directed. | 40 | RM | |
29 | 29 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | 890 | SQM | |
30 | 30 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. | 80 | SQM | |
31 | 31 | M&L for Rendering 15 mm thick in cement sand mortar (1:6) on fair faces of concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge. | 175 | SQM | |
32 | 32 | M&L for Rendering, 15 mm thick plaster in cement sand mortar ( 1:4), in two layers, top 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a layer of 10 mm thick base layer etc complete all as specified and as directed by Engineer-in-Charge.\nNote WPC shall be measured and paid separately. | 175 | SQM | |
33 | 33 | Supply only integral water proofing compound , ISI marked.complete all as specified and as directed. | 5.25 | KG | |
34 | 34 | M&L for Non Skid coloured Ceramic tiles, joint free, 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including screed bed or bedding layer of mortar 15mm thick in cement sand mortar (1:6) for laying floor tiles complete all as specified and directed. | 60 | SQM | |
35 | 35 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick , (square/rectangular), joint free, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. | 533 | SQM | |
36 | 36 | All as per above item No 35.00 but as in vertical surfaces such as skirting & dado over and including 10mm thick backing course using cement sand mortar (1:3) complete all as specified and as directed. | 67 | SQM | |
37 | 37 | M&L Glazed ceramic colour tiles of size 300x450x7mm /300x600x7 thick in vertical surfaces etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete all as specified and directed. | 220 | SQM | |
38 | 38 | M&L for Granite 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as spefied & directed | 12 | SQM | |
39 | 39 | M&L for machine cut Kota stone slab flooring 20-25 mm thick laid over and including 20 mm thick screed bed in cement sand mortar 1:4 machine cut , bedded and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing complete all as spefied & directed | 140 | SQM | |
40 | 40 | Labour only for chamfer, splays or arris in facework of granite not exc 15mm wide complete all as spefied & directed | 30 | RM | |
41 | 41 | S&F Anodised Aluminium frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed . | 280 | Sqm | |
42 | 42 | M&L for 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed. | 280 | Sqm | |
43 | 43 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specified and directed. | 55.8 | Rm | |
44 | 44 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site complete all as specified and directed. | 18.2 | Sqm | |
45 | 45 | M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed by Engineer-in-Charge. | 0.7 | CUM | |
46 | 46 | S&F 35 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed. | 50.2 | SQM | |
47 | 47 | S&F 30 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed. | 14 | Sqm | |
48 | 48 | S&F 30 mm thick Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and directed. | 36 | SQM | |
49 | 49 | S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed | 10 | KG | |
50 | 50 | S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified and upto the entire satisfaction of Engineer in charge. | 3 | SQM | |
51 | 51 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21\n100 mm long (2 no.) suitable handle (1 no.) complete all as specified and upto the entire satisfaction of Engineer in charge. | 3 | SQM | |
52 | 52 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and as directed. | 14 | SQM | |
53 | 53 | S&F Sheet glass,4.80 mm thick ,ordinary quality and glazing fixed to aluminium frame exc 0.5 sq. m in each pane complete all as specified and as directed. | 2 | SQM | |
54 | 54 | S&F Sheet glass frosted ,4.80 mm thick ,ordinary quality and glazing fixed to aluminium frame exc 0.5 sq. m in each pane complete all as specified and as directed. | 2 | SQM | |
55 | 55 | S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with wooden beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed. | 22 | Sqm | |
56 | 56 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed | 40 | SQM | |
57 | 57 | S&F Mild Steel Butt hinges, medium weight, cold rolled, 100mm size ISI Marked complete all as specified and directed. | 164 | Each | |
58 | 58 | S&F Mild Steel Butt hinges, medium weight, cold rolled, 75mm size ISI Marked complete all as specified and directed. | 48 | Each | |
59 | 59 | S&F Extruded aluminium anodised bow handles of 150 mm length etc complete all as specified and as directed. | 68 | Each | |
60 | 60 | S&F Extruded aluminium anodised bow handles of 100 mm length etc complete all as specified and as directed. | 40 | Each | |
61 | 61 | S&F Aluminium anodised, barrel tower bolts of extruded section 150 mm length complete all as specified and as directed. | 48 | Each | |
62 | 62 | S&F Aluminium anodised, barrel tower bolts of extruded section 100 mm length complete all as specified and as directed. | 48 | Each | |
63 | 63 | S&F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and directed. | 34 | Each | |
64 | 64 | S&F hat peg and hooks solid body 125mm to 175mm complete all as specified and as directed. | 165 | EACH | |
65 | 65 | Taking up or down steel tubing with connections of 15 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed. | 110 | RM | |
66 | 66 | Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed. | 35 | RM | |
67 | 67 | S&F GI tubing 15 mm dia medium grade with all necessary GI fittings, fixed in wall, ceiling or floor with necessary clamp or hook complete all as specified and as directed. | 245 | RM | |
68 | 68 | S&F GI tubing 20 mm dia medium grade with all necessary GI fittings, fixed in wall, ceiling or floor with necessary clamp or hook complete all as specified and as directed. | 35 | RM | |
69 | 69 | S&F in repair rotational moulded polyethylene 1000 ltrs capacity water storage tanks , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed. | 3 | EACH | |
70 | 70 | S&F in repair Gun-metal, globe or gate valves,20 mm bore (ISI marked) with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and as directed. | 3 | EACH | |
71 | 71 | S&F in repairs Vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including PVC water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, flushing pipe, fixing bolt for pedestal pattern and making good to disturbed surfaces of floor etc complete all as specfied and directed. Make:- Jaguar Cat Part No:-CNS-WHT-551PS or equivalent make of Parryware / Hindware/Cera. | 9 | EACH | |
72 | 72 | S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge .Make:- Prayag cat aprt no. 4645 IRIS or equivalent make of Cera/Jaquar/Parryware/ Hindware. | 9 | EACH | |
73 | 73 | S&F in repair sink made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm ,bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.Make:- Prayag / Nirali / Hindware | 2 | EACH | |
74 | 74 | S&F in repair 15 mm bore brass CP center hole basin mixer for mixing hot and cold water ,fancy type etc complete all as specified and directed. Make : Prayag cat part no. 7650 or equivalent modal of Cera / Hindware / Jaquar. | 9 | EACH | |
75 | 75 | S&F in repair CP single lever wall mixer 3-in-1 system with provision for bath hand shower and overhead shower with 115 mm long bend pipe connecting legs and wall flange ( without hand & overhead shower) etc complete all as specified and as directed. Make: Jaquar Cat.part No OPP-CHR-15125PM or equivalent model from make Hindware / Prayag. | 5 | EACH | |
76 | 76 | S&F in repairs CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Prayag Cat part No.7606 or equivalent model from make:Cera/Jaguar/Parryware | 5 | EACH | |
77 | 77 | S&F in repairs CP angular Stop cock ,15 mm bore, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Prayag Cat part No.8010 or equivalent model from make Cera/Jaguar/Parryware | 15 | EACH | |
78 | 78 | S&F in repair Tubular towel rail, brass chromium plated ,20mm dia, D type, 60cm long between flanges etc complete all as specified and as directed.Make: Prayag / Hindware / Sona. | 9 | EACH | |
79 | 79 | S&F in repair 15 mm bore health faucet cock with flexible pipe 1 meter long etc complete all as specified and as directed. Make: Jaquar Cat.part No ALD-CHR-565 or equivalent model from make Hindware / Prayag/Cera. | 5 | EACH | |
80 | 80 | S&F in repair CP soap dish holder fixed on wall with CP screws etc complete all as specified and as directed. Make: Prayag Cat.part No .ACN 1131N or equivalent model from make Hindware / Prayag/Cera | 5 | EACH | |
81 | 81 | S&F in repair stainless steel Toilet paper roll holder with fixed on wall with CP screws etc complete all as specified and as directed. Make:Jaquar Cat.part No AKP-35755PS or equivalent model from makeHindware / Prayag/Cera | 5 | EACH | |
82 | 82 | S&F 600x450mm Bevelled edge mirror, of thickness 5mm of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge | 5 | EACH | |
83 | 83 | S&F in repair PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed. | 45 | EACH | |
84 | 84 | M &L for Cutting chases, pinning in concrete block work, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. | 110 | RM | |
85 | 85 | S&F in repair PVC (SWR) floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement etc complete all as specified and directed. | 17 | Each | |
86 | 86 | S&F in repair for PVC (SWR) 'P' trap 100/110 mm, setting and jointing with solvent cement complete allas specified and as directed by Engr-In-Charge. | 11 | Each | |
87 | 87 | S&F in repair 110 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint laid in trenches/floors complete all as specified and directed.Make:- Prince / supreme. | 75 | RM | |
88 | 88 | S&F in repair 75 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint laid in trenches/floors complete all as specified and directed.Make:- Prince / supreme. | 45 | RM | |
89 | 89 | S&F in repair 110mm bore PVC (SWR) bends /door bend of any radius with cement solvent, cement joints, complete all as specified and as directed. | 12 | EACH | |
90 | 90 | S&F in repair 75mm bore PVC (SWR) bends /door bend of any radius with cement solvent, cement joints, complete all as specified and as directed. | 12 | EACH | |
91 | 91 | S&F in repairs PVC (SWR) vent cowl 75mm dia complete all as specified and as directed. | 8 | Each | |
92 | 92 | S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends to stays to wall or roof complete all as specified and as directed. | 22 | Each | |
93 | 93 | S&F in repair CP over head showers dia around 100 mm round shape single flow ( ABS body chrome plated with grey face plate ) with rubit cleaning system with CP shower arm dia 20 mm long round shape without bend for wall mounted showers wall flange etc complete all as specified and as directed. Make: Jaquar Cat.No OHS-CHR-1989 with SHA-CHR-49483 or equivalent model from make Hindware / Prayag. | 5 | EACH | |
94 | 94 | M&L for Synthetic enamel paint two coats over a coat of pink primer on new or previously untreated wooden surfaces over 10 Cm width or girth including necessary preparation of wooden surfaces complete all as specified and as directed. | 185.12 | SQM | |
95 | 95 | M&L for Synthetic enamel paint one coat on old wooden surfaces over 10 Cm width or girth including necessary preparation of wooden surfaces complete all as specified and as directed by Engineer-in-Charge. | 130 | SQM | |
96 | 96 | M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of Creosote complete all as specified and directed. | 105 | Sqm | |
97 | 97 | M&L for preparation of newly or previously undecorated plastered surface and applying oil bound distemper two coats over one coat of wall primer over and including 3 mm thick wall care putty complete all as specified and as directed by Engineer-in-Charge. | 175 | SQM | |
98 | 98 | M&L for complete removal of existing treatment of walls, preparing the surfaces even & smooth by rubbing with wire brush or sand paper and applying one coat of oil bound distemper over 1 mm wall care putty complete all as specified and as directed by Engineer-in-Charge. | 1550 | SQM | |
99 | 99 | M&L for complete removal of existing treatment of walls, preparing the surfaces and applying one coat of white or tinned cement base paint complete all as specified and directed by Engineer-in-Charge.\n | 1470 | SQM | |
100 | 100 | M&L for preparation of new plastered surfaces of wall and applying two coats of white or tinned cement base paint over a coat of wall primer complete all as specified and directed by Engineer-in-Charge.\n | 175 | SQM | |
101 | 101 | S & F in repairs Harrison rails, mild steel, chromium plated with fixing brackets stops, rollers etc all as specified and directed. | 200 | RM | |
102 | 102 | M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description and girth, not otherwise described, and treated with tar or coal tar black paint area tarred exc 0.10 sq. m but n exc 0.5 sq. m each complete all as specified and directed by Engineer-in-Charge. | 0.78 | PER 100 Nos | |
103 | 103 | S&F in repair PVC (Plastic polymer flushing Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length, brackets and making connections complete all as directed by Engineer-in-Charge .Make:- Prayag /Cera/ Hindware. | 9 | Each | |
104 | 104 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holders, regulators, switch, socket outlets, bell push, ceiling rose etc , removing material to store for keeping in safe custody for reuse at site and making good to disturbed surfaces of walls with cement sand mortar (1:6) and white/colour wash to match with existing surfaces etc complete all as directed. | 316 | PER POINT | |
105 | 105 | M&L Point wiring with single runs PVC insulated FRLSH grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sqmm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping of suitable size with all fittings and accessories including PVC rectangular board of suitable size and drawing continuous earth wire of PVC insulated FRLSH grade, unsheathed stranded copper conductor of size 1.5 Sqmm (ISI Marked) as continuous earth wire terminated in and including sunken box for following type of point wiring including making good disturbed of wall complete all as specified in SSR Part-I, 2009 and Part-II, 2010 and as directed by Engineer-in- Charge for one light point / one fan point etc on independent board controlled by one one way switch etc complete all as specified and as directed.\n\n \n | 189 | PER POINT | |
106 | 106 | All as per item No 105.00 above but for one 2/3 pin socket outlet 5/6 Amps point on same board etc complete all as specified and directed. | 21 | PER POINT | |
107 | 107 | All as per item No 105.00 above but for one call bell point controlled by one 6 amps bell push switch etc complete all as directed by Engineer -in -Charge . | 8 | PER POINT | |
108 | 108 | All as per item No 105.00 above but for one 2/3 pin socket outlet 5/6 Amps point on independent board etc complete all as specified and directed. | 32 | PER POINT | |
109 | 109 | All as per Item No. 105.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 4.0 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. | 29 | PER POINT | |
110 | 110 | Supply and fixing ,Call bell, ding dong, AC, 230 V, Single pole (ISI marked) completed all as specified and directed. | 6 | EACH | |
111 | 111 | Supply and fixing ,bell push 5 Amps , AC 240 V, Single pole (ISI marked) completed all as specified and directed. | 5 | EACH | |
112 | 112 | S&F Ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed. | 197 | Each | |
113 | 113 | Supply and fix Socket (ISI marked), 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. | 53 | EACH | |
114 | 114 | Supply and fix Switch socket combination (ISI marked), 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and as directed. | 29 | EACH | |
115 | 115 | Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5 Amps complete all as specified and directed. | 228 | EACH | |
116 | 116 | Supply and fixing in repair LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size etc complete all as specified and as directed. Make Bajaj Cat Part No BCLSB 18 WH or crompton cat part no LCTL- CDL-18 equivalent make of Philips / Havells. | 120 | EACH | |
117 | 117 | S & F in repair wall mounted LED batten fittings with all accessories 1X 9/10 Watt LED 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed .Make Bajaj Cat Part No BCLSB 10 NW or or equivalent make of Philips / Havells. | 40 | EACH | |
118 | 118 | S & F in repair wall bracket decorative LED Light fitting with lamp 8 Watt complete with necessary connection etc complete all as specified and as directed. Make Philips Cat Part No37712/06 or equivalent model from Havell's/Bajaj | 18 | EACH | |
119 | 119 | Supply and fix and testing of storage type , electrically driven ,ISI Marked, water heater (Geyser) of capacity 25 litres, vertical type, wall mounted, BEE 5 star rating , AC, single phase including necessary fixing arrangements , electric and water connection complete all as specified and as directed. Make:- Havells Cat part no. GHWASEIB025 or equivalent make in Racold / Bajaj/LG . | 11 | EACH | |
120 | 120 | S&F heat resistant PVC connection pipe for hot and cold water 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed. Make: Prayag/Polytuf/Havells/Sona | 11 | SET OF TWO | |
121 | 121 | Supply & fix in repair static electric energy meter (KWH) of accuracy class 1.0 AC Single phase, 240 volts, 50 Hz of rating 10A-60A Backlit LCD display with transparent hinge type box (measures and displays KWH, V, Current I, KW, pf last month history of KWH, MD in KW with special features like TOD, temper logging, optical communication port display in absence of power) fixed on wooden / PVC board complete all as specified & directed by Engr-in-Charge. Make :L & T Cat Part No-WM101BC5DLO. | 13 | EACH | |
122 | 122 | S & F in repairs Exhaust fan 230 volts , 250mm sweep ,plastic body including making all electric connection including cutting of hole on brick or block wall and making good disturbed to disturbed surface of wall with cement sand plaster (1:4) and painted / colour wash to match the existing to the true satisfaction of Engineer in charge, necessary and outer wooden box for fan fix on wall etc complete all as specified and as directed. Make :- Havells cat part no. ventil air DX White or equivalent make of Bajaj / Philips. | 19 | EACH | |
123 | 123 | S&F in repair LED security building light LED 25 Watt, pressure die cast aluminium housing, heat resitant glass, IP65 protection, better optics for uniform distribution complete with all accessories internally prewired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and directed. Make Bajaj Cat Part No-169821 LED/CG or equivalent model from make : Surya/Havells | 7 | EACH | |
124 | 124 | S&F CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Prayag Cat part No.7606 or equivalent model from make:Cera/Jaguar/Parryware | 32 | EACH | |
125 | 125 | S&F CP angular Stop cock ,15 mm bore, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Prayag Cat part No.8010 or equivalent model from make Cera/Jaguar/Parryware | 16 | EACH | |
126 | 126 | Supply and fix in repair MCCB TPN , 240 Volt, 40-63 Amps,10 KA rupturing capacity , adjustable thermal & fixed magnetic setting complete all as specified and directed.Make: Havells / Schnieder / GE / C&S / Indoasian / L&T / Legrand. | 2 | EACH | |
127 | 127 | S&F in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with necessary electrical connection complete all as specified and directed . Make: Havells Cat Part No-DHDPSHODRW12 or equivalent make of Legrand / Schneider /L&T | 6 | EACH | |
128 | 128 | S&F in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with necessary electrical connection complete all as specified and directed . Make: Havells Cat Part No-DHDPSHODRW04 or equivalent make of Legrand / Schneider /L&T | 4 | EACH | |
129 | 129 | Supply and fix in repair MCCB Distribution board, TP&N , vertical , double door, 50 Hz with IP-43 protection,sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells/Schnieder/GE/C&S. | 2 | EACH | |
130 | 130 | S&F in repair MCB DP, 240 Volt, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed .Make:- Havells cat part no.DHMCCDPF006-32 or equivalent model from make:- Hager/Schneider / Siemens / Legrand / Indo Asian . | 10 | EACH | |
131 | 131 | S&F in repair MCB SP, 240 Volt, 6-32 Amps fixed in DB's complete all as specified and directed .Make:- Schneider cat part no.A9N4P32C or Indo asian Cat Part No-81195or Hager cat part No.NCN106N | 62 | EACH | |
132 | 132 | Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR kabel/Havells/KEI, PVC Casing Capping- Presto plast/Finolex/Kalinga. | 265 | RM | |
133 | 133 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and as directed. | 4 | Each Job | |
134 | 134 | Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, etc n exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed. | 39 | CUM | |
135 | 135 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in soft/loose soil etc complete all as specified and as directed. | 24 | CUM | |
136 | 136 | Removing excavated materials (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed. | 14 | CUM | |
137 | 137 | M&L for Sand cushioning with dry clean river sand for protection/covering of under ground cable in trenches complete all as specified and directed by Engr-in-Charge. \nNote:- Punned thickness only shall be measured for payment. | 13 | CUM | |
138 | 138 | Supply and laying Sub class 'B' well burnt fly ash brick, laid flat in trenches as protection to XLPE cable complete all as specified and as directed. | 1.1 | PER 1000 Nos | |
139 | 139 | Supply and laying GI tubing light grade,40mm bore with all GI fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed | 18 | RM | |
140 | 140 | Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 16.0 Sqmm 4 Core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. | 105 | RM | |
141 | 141 | Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 10.0 Sqmm 2 Core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed. | 65 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail