}

Repair Maint Of Water Supply Network Connected Works At Otm Omq Area At Af Station Gwalior, AF STATION GWALIOR-Madhya Pradesh

Military Engineer Services-MES has published Repair Maint Of Water Supply Network Connected Works At Otm Omq Area At Af Station Gwalior. Submission Date for this Tender is 22-06-2021. Water Supply Project Tenders in AF STATION GWALIOR Madhya Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

27690020
Corrigendum : Repair Maint Of Water Supply Network Connected Works At Otm Omq Area At Af Station Gwalior
Open Tender
Indian
Madhya Pradesh
AF STATION GWALIOR
22-06-2021

Tender Details

Repair Maint Of Water Supply Network Connected Works At Otm Omq Area At Af Station Gwalior

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 10-May-2021 OTHER CORRIGENDUM Other 20-05-2021
2 17-May-2021 Tender Postponed Date 04-06-2021
3 03-Jun-2021 Date Corrigendum2 Date 15-06-2021
4 15-Jun-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 22-06-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 36900.0 /-
Tender Value
Refer document

BOQ Items

Name of Work : REPAIR/MAINT OF WATER SUPPLY NETWORK & CONNECTED WORKS AT OTM/OMQ AREA AT AF STATION GWALIOR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in any type of soil including forming sides and bottom surface to required levels/slops/gradients etc. complete all as specified and directed at site.\nNote: The disturbed surfaces of roads/paths/plinth shall be made good to match with the existing surfaces and is deemed to be included in unit rate quoted. 1 360 Cum
2 2 Excavation in mud, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in any type of soil including forming sides and bottom surface to required levels/slops/gradients etc. complete all as specified and directed at site. 2 50 Cum
3 3 Returning, filling in, excavated soil including leveling, watering and well ramming in layers of thickness not exceeding 25 cm in each layer complete all as specified and directed. 3 370 Cum
4 4 Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing the soil where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 4 40 Cum
5 5 Disconnecting and taking up or down old existing steel tubing and connections of any description/ grade and in any position in trenches/under floors / on walls etc including connected fittings/accessories and fixtures like union,valves etc. seggregation serviceable pipes and fittings, keep them safe custody for reuse and unserviceable material be removed from site of work all as directed and specified for the following sizes :- 5
6 5.1 80 mm bore 6 150 RM
7 5.2 50 mm bore 7 190 RM
8 5.3 40 mm bore 8 160 RM
9 5.4 25 mm bore 9 350 RM
10 5.5 20 mm bore Note: Earth work, returning filling, removing shall be measured & paid separately under respective item. 10 370 RM
11 6 Laying, testing old serviceable steel water tubing and connections of any description / any grade and in any position obtained in serviceable condition from taking down, in new or old position as in trenches with using new fittings i.e. bends/ Tee/ sockets/ union / reducers/ elbow etc. including cutting / making new threads at the ends of old pipes for the following size all as specified and directed. :- (NOTE:-Serviceble pipe, fittings shall be obtained from srl item no. 5 here-in-before for reuse.) 11
12 6.1 80 mm bore 12 50 RM
13 6.2 50 mm bore 13 70 RM
14 6.3 40 mm bore 14 60 RM
15 6.4 25 mm bore 15 100 RM
16 6.5 20 mm bore 16 120 RM
17 7 Supply /Laying / jointing and testing galvanized iron water tubing medium grade including necessary new steel fittings / accessories ISI Marked complete all as specified and directed for the following sizes. [Make: Tata/Jindal/TT swastik] 17
18 7.1 80 mm bore 18 100 RM
19 7.2 50 mm bore 19 120 RM
20 7.3 40 mm bore 20 100 RM
21 7.4 25 mm bore 21 250 RM
22 7.5 20 mm bore 22 250 RM
23 8 Taking up / down existing, cast iron pipe lines / water mains of any description / grade and in position including fittings, accessories and fixtures etc existing in between pipe line, by taking out and opening any type of joints (Tyton /Gasket / Lead joints) complete all as specified and directed by the Engineer-in-Charge for following bore of pipes:- 23
24 8.1 300mm bore 24 21 RM
25 8.2 200mm bore 26 16 RM
26 8.3 150mm bore 27 95 RM
27 8.4 100mm bore 28 120 RM
28 8.5 80mm bore Note:- Old CI pipe / fittings retrieved in serviceable condition from taking down shall be reused in the work as approved by the Engineer-in-Charge. 29 120 RM
29 9 Laying, testing in trenches, spigot and socketed cast iron pipes of any description / grade and in any position, as obtained from taking up or down, after making necessary addition / alterations and properly cleaning the pipes complete all as specified and directed by Engineer-in-Charge for following bore of pipes:- 30
30 9.1 300mm bore 31 15 RM
31 9.2 200mm bore 33 10 RM
32 9.3 150mm bore 34 45 RM
33 9.4 100mm bore 35 50 RM
34 9.5 80mm bore NOTE:-(i) Earth work, Joints and CI specials/ fittings of the pipes shall be measured and paid for separately under appropriate item of Schedule `A'. 36 50 RM
35 10 Supplying ,laying, jointing & testing in trenches ductile iron pipes with spigot and socketed ends class k9, conforming to IS 8392-2000 and suitable for push on joints complete all as specified and directed by Engineer-in-Charge for the following size:- Note :-(i) Earth work, Joints and CI specials/fittings of the pipes shall be measured and paid for separately under appropriate item of Schedule `A'\n(ii) Joints of the pipes shall be measured and paid for separately under appropriate item of Schedule `A'. [Make: TATA/Electrosteel casing Ltd./Jindal] \n 37
36 10.1 300mm bore 38 6 RM
37 10.2 200mm bore 40 6 RM
38 10.3 150mm bore 41 50 RM
39 10.4 100mm bore 42 70 RM
40 10.5 80mm bore 43 70 RM
41 11 Material and labour for cast iron/ductile iron specials/fittings such as bend, tee, socket, collar Reducer, Tail Pieces etc. suitable for spigot and socketed/ flanged end pipe of up to 150 mm bore complete all as specified and directed. [Make: Upadhay/Kirlosker /Leader/Kalinga] 44 180 Kgs
42 12 All as per item no-11 here-in-before but suitable for CI pipe above150mm bore 45 160 Kgs
43 13 Taking down existing gun metal gate valves of any description and in any position, complete all as specified and directed the following sizes :- 46
44 13.1 50mm bore 47 10 Each
45 13.2 40mm bore 48 18 Each
46 13.3 25mm bore 49 30 Each
47 13.4 20mm bore 50 28 Each
48 13.5 15mm bore 51 28 Each
49 14 Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe complete all as specified and directed for following bore of pipes [Make:-Zoloto/Leader/Kirlosker] 52
50 14.1 50mm bore 53 10 Each
51 14.2 40mm bore 54 18 Each
52 14.3 25mm bore 55 30 Each
53 14.4 20mm bore 56 28 Each
54 14.5 15mm bore 57 28 Each
55 15 Taking up or down existing old cast iron sluice valves of any description and in any position, including taking out joints complete all as specified and directed for the following sizes :- 58
56 15.1 300 mm bore 59 2 Each
57 15.2 150 mm bore 60 5 Each
58 15.3 100 mm bore 61 4 Each
59 15.4 80 mm bore 62 6 Each
60 16 Supply, installation, fixing, jointing and testing, ISI Marked, of approved quality, cast iron sluice valve of class PN-1.5 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type, jointed and tested complete all as specified and directed for following bores :- 63
61 16.1 300 mm bore 64 2 Each
62 16.2 150 mm bore 65 5 Each
63 16.3 100 mm bore 66 4 Each
64 16.4 80 mm bore [Note:- (i) Joints of the sluice valve shall be measured and paid for separately under appropriate item of Schedule `A' . (ii) Sluice valve shall be of MAke- Zoloto/Leader /Kirlosker/IVC] 67 6 Each
65 17 Taking up or down exiting old cast iron non return valves of any description and in any position, complete all as specified and directed for the following sizes:- 68
66 17.1 150 mm bore 70 2 Each
67 17.2 100 mm bore 71 3 Each
68 17.3 80 mm bore 72 5 Each
69 18 Supply and fixing, ISI Marked, of approved quality, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed. For following sizes ( Make- BIR/ Sant/Upadhyay) 73
70 18.1 150 mm bore 75 2 Each
71 18.2 100 mm bore 76 3 Each
72 18.3 80 mm bore NOTE :- (i) Joints of the non return valve shall be measured and paid for separately under appropriate items of Schedule ‘A’ 77 5 Each
73 19 Burring out run lead joints for the following sizes of CI pipes/fittings etc all as specified and directed:- 78
74 19.1 300mm bore 79 6 Each
75 19.2 200mm bore 81 4 Each
76 19.3 150mm bore 82 50 Each
77 19.4 100mm bore 83 40 Each
78 19.5 80mm bore 84 30 Each
79 20 Material and labour for run lead joints including caulking properly for the following sizes of CI pipes/fittings etc all as specified and directed:- 85
80 20.1 300mm bore 86 6 Each
81 20.2 200mm bore 88 4 Each
82 20.3 150mm bore 89 50 Each
83 20.4 100mm bore 90 40 Each
84 20.5 80mm bore 91 30 Each
85 21 Dismantling joints in flanged end cast iron pipes and fittings complete all as specified and directed for following sizes:- 92
86 21.1 300 mm bore 93 3 Each
87 21.2 200 mm bore 95 2 Each
88 21.3 150 mm bore 96 10 Each
89 21.4 100 mm bore 97 10 Each
90 21.5 80 mm bore 98 10 Each
91 22 Material and labour for rubber gasket joints in flanged end cast iron pipes and fittings complete with and including minimum 3 mm thick rubber/fibre gasket and necessary nuts/bolts/washers all as specified and directed for following sizes:- 99
92 22.1 300 mm bore 100 3 Each
93 22.2 200 mm bore 102 2 Each
94 22.3 150 mm bore 103 10 Each
95 22.4 100 mm bore 104 10 Each
96 22.5 80 mm bore 105 10 Each
97 23 Material and labour for fabricating and fixing on pipe line MS clamp of flat iron made to shape alongwith nuts, bolt washers etc suitable for pipe line all as specified and directed by Engineer-in-Charge for stopping leaking of pipe lines of any description and in any position clamps shall be shape and size as approved, tightened with suitable nuts, bolts washers as directed by Engr-in-charge Note:- (i) Weight of clamps including nuts, bolts and washer shall be measured for payment purpose. (ii) Clamp shall be tightened with using suitable rubber washers. (iii) Clamp shall be applied two coats of black bituminous paints over a coat of red oxide primer after preparation of surface. 106 60 Kg
98 24 Taking down old PVC pipe of 15mm dia from any position all as specified and directed. 107 100 RM
99 25 M&L for unplasticised PVC pipe of 15mm dia of pressure rating 10Kg/cm2 laid in trenches/floors etc including all fitting, clamp complete all as specified. [Make:- Prince/Supreme/Kisan] 108 100 RM
100 26 Cutting of the existing CI pipe line for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including dewatering etc complete all as directed for the following bore of pipes:- 109
101 26.1 (a) CI Pipe line 300 mm bore 110 2 Each Job
102 26.2 (c) CI pipe line 200 mm bore 112 2 Each Job
103 26.3 (d) CI Pipe line 150 mm bore 113 10 Each Job
104 26.4 (e) CI Pipe line 100 mm bore 114 8 Each Job
105 26.5 (f) CI Pipe line 80 mm bore 115 8 Each Job
106 27 Dismantling & breaking down the old existing valve pit chamber of any size and any shape and remove material from site of work complete all as directed. 116 16 Each Job
107 28 Material and labour for construction of brick masonry valve pit /chamber complete with 3mm thick MS sheet cover with locking arrangement of size 450x 450x 600mm (depth) (internal dimensions) as shown on Drg No CWE/TD/129 sheet No 1/1 dt 18.12.87 with and including necessary excavation & earth work in any type of soil complete all as specified and directed by Engineer-in-Charge. 117 6 Each Job
108 29 All as per srl item No 28 here-in-before but of size of valve pit 600mm x 600mm x 600mm (depth) (internal dimensions) 118 5 Each Job
109 30 All as per srl item No 28 here-in-before but of size of valve pit 800mm x 800mm x 900mm (depth) (internal dimensions) 119 5 Each Job
110 31 M&L for rectifying leakage of CI pipe line including excavation in any type of soil (not exc 1.5m x1.5m x 6.1m) and making arrangement for dewatering, by using electric/diesel pump/manual additional labour, taking out existing joint and making new run lead joints (Old lead shall be used by burning in new joint) complete all as directed for following size of pipe lines:- 120
111 31.1 (a) 300 mm bore 121 5 Each Job
112 31.2 (c) 200 mm bore 123 5 Each Job
113 31.3 (d) 150 mm bore 124 30 Each Job
114 31.4 (e) 100 mm bore 125 15 Each Job
115 31.5 (f) 80 mm bore 126 15 Each Job
116 32 Material and labour for rectifying leakage of GI pipe line including excavation in mud (not exc 0.7m x0.5mx 6.1m ) and making arrangement for dewatering by using electric/diesel pump/manual additional labour, taking out existing fittings and supply and fixing new fittings as required at site , complete all as directed by Engineer - in - charge for following size of pipe lines:-\n 127
117 32.1 (a) 80 mm bore 128 35 Each Job
118 32.2 (b) 50 mm bore 129 35 Each Job
119 32.3 (c) 40 mm bore 130 35 Each Job
120 32.4 (d) 25 mm bore 131 35 Each Job
121 32.5 (e) 20 mm bore 132 35 Each Job
122 32.6 (f) 15 mm bore 133 10 Each Job
123 33 Disconnecting , Dismantling and taking down complete valve from pipe line and refixing the same to its position after following repair of size 300 mm dia complete all as directed. (a) Fabrication and fixing of stainless steel spindle as per sample including threading and machinery work. (b) Fabrication and fixing of GM Nut (Gutka) (c) Fabrication and fixing of gland plate. (d) Replacement of damaged nut, bolt, washers and packing. 134 5 Each Job
124 34 All as per srl item No 33 here-in-before but of Size 200mm dia 135 4 Each Job
125 35 All as per srl item No 33 here-in-before but of Size 150mm dia 136 8 Each Job
126 36 All as per srl item No 33 here-in-before but of Size 100mm dia 137 2 Each Job
127 37 All as per srl item No 33 here-in-before but of Size 80mm dia 138 5 Each Job
128 38 Dismantling and taking out existing damaged / rusted valve pit cover of any size from valve pit chamber, not less than 1 M x 1 M and M & L for new valve pit coverof size not less than 1 M x 1 M made out from MS Angle iron of size 50 x 50 x 5mm frame with fixing the MS sheet of thickness 3 mm welded on MS angle complete including locking arrangement with applying two coat of synthetic enamel paint 1st grade over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. 10 Each Job
129 39 Cleaning of wild shrubs,vegetation,bushes etc in soil not exceeding 15CM in depth including removing & cleaning rubbish material from the site upto a distance exc 250m but not exc 500m twice in the contract period complete with the entire satisfaction of Engineer-in-charge. 139 8000 Sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail