}

Conversion From P&T To Piped Rural Water Supply Scheme Of Village Ponchharitehsil Hindaun District Karauli, Hindaun-Rajasthan

Public Health Engineering Department-PHED has published Conversion From P&T To Piped Rural Water Supply Scheme Of Village Ponchharitehsil Hindaun District Karauli. Submission Date for this Tender is 26-04-2021. Water Supply Project Tenders in Hindaun Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

27687336
Conversion From P&T To Piped Rural Water Supply Scheme Of Village Ponchharitehsil Hindaun District Karauli
Open Tender
Indian
Rajasthan
Hindaun
26-04-2021

Tender Details

CONVERSION FROM P&T TO PIPED RURAL WATER SUPPLY SCHEME OF VILLAGE PONCHHARITEHSIL HINDAUN DISTRICT KARAULI

Key Value

Document Fees
INR 2000 /-
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: CONVERSION FROM P&T TO PIPED RURAL WATER SUPPLY SCHEME OF VILLAGE PONCHHARITEHSIL HINDAUN DISTRICT KARAULI
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Construction of Tubewell 200mm dia from ground levels and up to 100 Mtr depth and above to accommodate housing and assembly pipe in all type of Alluvium strata, unconsolidated formation such as pebbles, boulders etc. by percussion/ rotary drilling method having minimum bore size of 445 mm and with gavel and packing as per IS:2800( part-I) 1991 and IS:2800 ( Part-II ) 1979 ( both amended up to date). The work will include cost of gravel & its primary packing and packing during development, lowering of housing & stainer assembly pipes with supply and wrapping of coir rope, wherever necessary for arresting fine sand particles and development work of tube well, but excluding the housing and strainer pipe assembly. The Work would be completed after obtaining sand free water during pumping. BI01010001010000000000000515BI0100001113
2 2 Nominal bore 200 MM Dia BI01010001010000000000000515BI0100001114 160 RM
3 3 Construction of tubewell after completion of drilling by rotary method and upto 150 mtr. depth in all type of rock by DTH system as per IS:2800 Part I 1991 and IS 2800 Part II 1979 ( both amended upto date ) and technical specifications. The work shall be deemed completed only after obtaining sand-free water during pumping.The bore well should have a through-out bore size of 200 mm beyond casing pipe. BI01010001010000000000000515BI0100001115
4 4 Nominal bore 200 MM Dia BI01010001010000000000000515BI0100001116 220 RM
5 5 Testing verticality of tube well by plumbing system, yield test and draw down test by pumping system as per IS: 2800 (part - II) 1979 or as amended up to date. BI01010001010000000000000515BI0100001117 2 Each
6 6 Labour charges for making slots on blank pipe made of ERW MS black pipe of following sizes, the sloting should be as per IS : 8110-2000 or as amended up to date. work of requred width and length on black M.S pipes of OD 219.1mm for converting these in to screen pipes as per IS: 8110-1985 on pipes where ever required. BI01010001010000000000000515BI0100001118 36 RM
7 7 200 mm dia nominal bore. BI01010001010000000000000515BI0100001119
8 8 Development of tube well as per IS : 11189-1985 and IS :2800 (part-I) 1991 (both amended up to date ) using suitable compressor to give sand free water for required yield of the gravel packed tube well. BI01010001010000000000000515BI0100001120 20 Hrs.
9 9 S&F Tubewell cover( for 200mm dia pipe) of MS sheet 8 mm thick at top & 5mm thick 100 mm wide shroud around the edge so as to form a cap on the top end casing pipe with G.I Nipple 45 cm long & two GI flange at both end in 80 mm size passing through ahole in the centre of MS sheet . A 25 mm socket with end plug shall also be weld over top plate (as per drawing enclosed ) AMS/GI nipple having inside thread of size1/2" (suitable for installation of pressure gauge ) shall be provide &welded with G.I nipple near top plate nipple shall be provided with end plug.. BI01010001010000000000000515BI0100001121
10 10 200 mm dia. BI01010001010000000000000515BI0100001122 2 Each
11 11 Supply and installation of 3- phase ISI Marked submerssible motor pump sets of 5 star rating by BEE and as per IS-8034:2018 (PUMP) and IS-9283:2013 (MOTOR) or amended upto date of approved make of following duty conditions with required accessories including making connections suitable for tubewell/DCB. The job includes lowering of motor pumps, installation of complete fitting and accessories, jointing of electric cables upto switch board, testing of submercible pump set and interconnection upto water mains, complete all as specified. BI01010001010000000000000515BI0100001123
12 12 9.3 KW (12.5HP) & Head above 120 mtr. 37.2 KW
13 13 Supply & fixing ISI Marked 3 core PVC flat submercible cable as per IS-694:1990 or amended upto date and conductor as per class V of IS 8130:1980 including making connections etc. BI01010001010000000000000515BI0100001125
14 14 A) 6.00 Sqmm 3 core BI01010001010000000000000515BI0100001126 500 RM
15 15 Providing and laying PVC insulated and PVC sheathered cables of1.1 KV with aluminium conductor of IS : 7098-I/1554 catagery 1 and approved make of including excavation of 30cmX 75cm side trench as per IS:1255 15 mm thick under layer of sand ii class brick covering ,refilling earth in remaining portion making necessary connection including testing etc. of required size of 4 core (cat I ) make as mentioned in specification. This includes all required hard material ,termination end with suitable crimping lugs. BI01010001010000000000000515BI0100001127
16 16 a) 16 Sqmm BI01010001010000000000000515BI0100001128 60 RM
17 17 Providing and lowering in Tubewell ISI mark GI pipe " B " class as per IS : 1239 ( part-I ) 2004 or amended up to date. for submercible pump set in 3 M length including of G I Flange at both end and 2 No flat 25X3mm welded on both ends between pipe and flange, rubber washer and nut bolts complete in all respect of following sizes.
18 18 a) 50 mm dia 180 RM
19 19 b) 80 mm Dia 12 RM
20 20 Providing and laying of GI pipe of A ( light ) class as per IS :1239 ( part-I ) or amended up to date. make for submercible cable exeternal work 40 mm dia complete in all respect. 12 RM
21 21 a) 80mm 2 Each
22 22 Supply and installing Double flanged Sluice valves as per IS :14846 of 80mm diameter with cap and giving Satisfactory test complete and or so directed by Engineer . It also include cost of labour , jointing material with nuts & bolt and Rubber sheet. 2 Each
23 23 Supply & installation of 100 mm dia sealed diaphragm burden type pressure gauge of range 0 to 10 kg along with all jointing material as per specification with safety cover. 2 Each
24 24 Poviding and fixing and installation, testing and commissioning of double flanged of 80 mm dia woltman type Bulk water meter with removable mechanism, of class B conforming to ISO 4064/1 or amended upto date of approved make including cost of all material and labour as per specifications with GI Box ( sheet 16 SWG) suitable for following dia water meter with locking arrangement. including all accessories of following dia.
25 25 A) 80 mm 2 Each
26 26 Providing and Installation,of Electric control feeder panel for Submersible pump set ( with automatic Star- Delta oil immersed) with all required components/items/hardware / and conforming to enclosed drawing and specification and including all mounting on CC M15 1:2:4 platform of size 900 mm X 450mm as per detailed specification.
27 27 a) above 10 HP & up to 15.0 HP 2 Each
28 28 Plat Earthing as per IS : 3043 of panel board using G.I Earth plate of size 600 mm * 600 mm *6 mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. welded on casing pipe of t/w and copper wire of 8 SWG . This includes excavation of trench ,all hardware and material . Complete in all respect. 2 Each
29 29 Providing & fixing of pump safety cage as per specification or as directed by Engineer in charge. 2 Each
30 30 Supply of ERW MS black casing pipe ISI Marked ( IS : 4270/2001 ) or amended up to date of 200 mm dia nominal bore (5.4 mm thickness of pipe & mass of tube 28.46 Kg/mtr.) of grade Fe410 170 RM
31 31 Rising Main
32 32 Providing, lowering,laying & Jointing in trenches, standard lengths of HDPE ISI marked pipes as per IS 4984:1995 with necessary jointing material like mechanical connectors, i.e. thread/insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and special jointing pipe by butt fusion/ electro fusion welding method including all taxes, transportation and frieght charges, inspection charges, loading/unloading charges, stacking of pipes ,including cost of labour and material, specials ( Tee, Bend etc) satisfactory hydraulic testing, disinfection etc complete as per technical specifications and direction of Engineer-in-Charge of following class and diameter ( excluding earthwork)\nNote: Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. \nSupply upto 110 mm dia in coil & above 110 mm dia straight length in 6 m For PE 80 PN-10
33 33 90 MM 600 RMT
34 34 110 MM 1000 RMT
35 35 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr.
36 36 In all type of soil
37 37 For HDPE pipe line dia up to 110 mm 1600 RMT
38 38 Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
39 39 Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.
40 40 (a) Bituminous courses
41 41 Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.
42 42 Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. \nNote: Rates are exclusive of tail piece/ dismantling joints and earth work.
43 43 Manually Operated CI Sluice valve of Class PN-1.0
44 44 100 mm HW 3 EACH
45 45 125 mm HW 2 EACH
46 46 150 mm HW 2 EACH
47 47 Distribution Main
48 48 Providing, lowering,laying & Jointing in trenches, standard lengths of HDPE ISI marked pipes as per IS 4984:1995 with necessary jointing material like mechanical connectors, i.e. thread/insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and special jointing pipe by butt fusion/ electro fusion welding method including all taxes, transportation and frieght charges, inspection charges, loading/unloading charges, stacking of pipes ,including cost of labour and material, specials ( Tee, Bend etc) satisfactory hydraulic testing, disinfection etc complete as per technical specifications and direction of Engineer-in-Charge of following class and diameter ( excluding earthwork)\nNote: Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. \nSupply upto 110 mm dia in coil & above 110 mm dia straight length in 6 m For PE 80 PN-6
49 49 75 MM 4000 RMT
50 50 90 MM 3000 RMT
51 51 110 MM 2000 RMT
52 52 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr.
53 53 In all type of soil
54 54 For HDPE pipe line dia up to 110 mm 9000 RMT
55 55 Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. 250 Cum
56 56 Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. 250 CUM
57 57 Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. \nNote: Rates are exclusive of tail piece/ dismantling joints and earth work.
58 58 Manually Operated CI Sluice valve of Class PN-1.0
59 59 80 mm HW 4 EACH
60 60 100 mm HW 4 EACH
61 61 125 mm HW 2 EACH
62 62 150 mm HW
63 63 200 mm HW
64 64 Sluive Valve Chember
65 65 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils 16.727 P.Cum.
66 66 Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls (any thickness) including attached pilasters, coloumns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, plain window sills, fillets etc up to floor three level excluding the const centering and shuttering.1:4:8 (1-Cement:4-coarse sand:8-graded stone aggregate 40 mm nominal size). 0.436 P.Cum.
67 67 Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in::Cement Mortar 1:6 (1-Cement:6-Sand). 11.636 P.Cum.
68 68 Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished :- 25 mm thick 21.818 P.Sqm
69 69 Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. 381.091 Per Kg.
70 70 Providing & laying cement concrete including curing compaction etc. complete using stone aggregate 20 mm nominal size in foundation plinth excluding the cost of shuttering using M-15 grade mix 1 : 2 : 4 (1 cement : 4 courese sand : 4 graded stone aggregate mix) 0.436 Cum
71 71 FHTC
72 72 Providing service connection as per technical specification and standard drawing as per relevant IS code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of cement concrete,WBM, Black top etc. of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS/PVC clamp with saddle piece, gunmetal ferrule 4.0 mm (ISI make) , valve (IS: 778) and specials with MDPE pipe PE 80 PN 12.5 as per ISO 4427 below ground level and GI 15 mm class B (ISI mark) above ground level ( max. length 3.0 mtr), P&F a Bib Cock (IS : 8931 Mark), Superior quality Brass 400 gm,15 mm nominal bore including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in case of concrete/bituminous roads where minimum depth shall be 20 cm.\nFor detailed specifications of MDPE pipes please refer section "Technical Specifications" of bid document. General specifications of MDPE pipes shall be as under:\n• The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of testing material : 9080 with minimum required strength of 8 Kg/sq.cm.\n• The raw material shall be Food grade quality \nPressure rating shall be 12.5 Bar.\n• The pipes shall bear ISO marking.\n
73 73 Average length up to 05 mtr 20 mm dia MDPE pipe and 02 mtr 15 mm GI class B pipe 237 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail