Public Health Engineering Department-PHED has published Retrofitting Rural Water Supply Scheme Of Village Rara Shahpur Retrofitting Rural Water Supply Scheme Of Village Rara Shahpur Tehsil Hindaun District Karauli. Submission Date for this Tender is 26-04-2021. Water Supply Project Tenders in Hindaun Rajasthan. Bidders can get complete Tender details and download the document.
Name of Work: RETROFITTING RURAL WATER SUPPLY SCHEME OF VILLAGE RARA SHAHPUR TEHSIL HINDAUN DISTRICT KARAULI | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Construction of Tubewell 200mm dia from ground levels and up to 100 Mtr depth and above to accommodate housing and assembly pipe in all type of Alluvium strata, unconsolidated formation such as pebbles, boulders etc. by percussion/ rotary drilling method having minimum bore size of 445 mm and with gavel and packing as per IS:2800( part-I) 1991 and IS:2800 ( Part-II ) 1979 ( both amended up to date). The work will include cost of gravel & its primary packing and packing during development, lowering of housing & stainer assembly pipes with supply and wrapping of coir rope, wherever necessary for arresting fine sand particles and development work of tube well, but excluding the housing and strainer pipe assembly. The Work would be completed after obtaining sand free water during pumping. | BI01010001010000000000000515BI0100001113 | ||
2 | 2 | Nominal bore 200 MM Dia | BI01010001010000000000000515BI0100001114 | 75 | RM |
3 | 3 | Construction of tubewell after completion of drilling by rotary method and upto 150 mtr. depth in all type of rock by DTH system as per IS:2800 Part I 1991 and IS 2800 Part II 1979 ( both amended upto date ) and technical specifications. The work shall be deemed completed only after obtaining sand-free water during pumping.The bore well should have a through-out bore size of 200 mm beyond casing pipe. | BI01010001010000000000000515BI0100001115 | ||
4 | 4 | Nominal bore 200 MM Dia | BI01010001010000000000000515BI0100001116 | 105 | RM |
5 | 5 | Testing verticality of tube well by plumbing system, yield test and draw down test by pumping system as per IS: 2800 (part - II) 1979 or as amended up to date. | BI01010001010000000000000515BI0100001117 | 1 | Each |
6 | 6 | Labour charges for making slots on blank pipe made of ERW MS black pipe of following sizes, the sloting should be as per IS : 8110-2000 or as amended up to date. work of requred width and length on black M.S pipes of OD 219.1mm for converting these in to screen pipes as per IS: 8110-1985 on pipes where ever required. | BI01010001010000000000000515BI0100001118 | 18 | RM |
7 | 7 | 200 mm dia nominal bore. | BI01010001010000000000000515BI0100001119 | ||
8 | 8 | Development of tube well as per IS : 11189-1985 and IS :2800 (part-I) 1991 (both amended up to date ) using suitable compressor to give sand free water for required yield of the gravel packed tube well. | BI01010001010000000000000515BI0100001120 | 10 | Hrs. |
9 | 9 | S&F Tubewell cover( for 200mm dia pipe) of MS sheet 8 mm thick at top & 5mm thick 100 mm wide shroud around the edge so as to form a cap on the top end casing pipe with G.I Nipple 45 cm long & two GI flange at both end in 80 mm size passing through ahole in the centre of MS sheet . A 25 mm socket with end plug shall also be weld over top plate (as per drawing enclosed ) AMS/GI nipple having inside thread of size1/2" (suitable for installation of pressure gauge ) shall be provide &welded with G.I nipple near top plate nipple shall be provided with end plug.. | BI01010001010000000000000515BI0100001121 | ||
10 | 10 | 200 mm dia. | BI01010001010000000000000515BI0100001122 | 1 | Each |
11 | 11 | Supply and installation of 3- phase ISI Marked submerssible motor pump sets of 5 star rating by BEE and as per IS-8034:2018 (PUMP) and IS-9283:2013 (MOTOR) or amended upto date of approved make of following duty conditions with required accessories including making connections suitable for tubewell/DCB. The job includes lowering of motor pumps, installation of complete fitting and accessories, jointing of electric cables upto switch board, testing of submercible pump set and interconnection upto water mains, complete all as specified. | BI01010001010000000000000515BI0100001123 | ||
12 | 12 | 9.3 KW (12.5HP) & Head above 120 mtr. | 18.6 | KW | |
13 | 13 | Supply & fixing ISI Marked 3 core PVC flat submercible cable as per IS-694:1990 or amended upto date and conductor as per class V of IS 8130:1980 including making connections etc. | BI01010001010000000000000515BI0100001125 | ||
14 | 14 | A) 6.00 Sqmm 3 core | BI01010001010000000000000515BI0100001126 | 250 | RM |
15 | 15 | Providing and laying PVC insulated and PVC sheathered cables of1.1 KV with aluminium conductor of IS : 7098-I/1554 catagery 1 and approved make of including excavation of 30cmX 75cm side trench as per IS:1255 15 mm thick under layer of sand ii class brick covering ,refilling earth in remaining portion making necessary connection including testing etc. of required size of 4 core (cat I ) make as mentioned in specification. This includes all required hard material ,termination end with suitable crimping lugs. | BI01010001010000000000000515BI0100001127 | ||
16 | 16 | a) 16 Sqmm | BI01010001010000000000000515BI0100001128 | 30 | RM |
17 | 17 | Providing and lowering in Tubewell ISI mark GI pipe " B " class as per IS : 1239 ( part-I ) 2004 or amended up to date. for submercible pump set in 3 M length including of G I Flange at both end and 2 No flat 25X3mm welded on both ends between pipe and flange, rubber washer and nut bolts complete in all respect of following sizes. | |||
18 | 18 | a) 50 mm dia | 90 | RM | |
19 | 19 | b) 80 mm Dia | 6 | RM | |
20 | 20 | Providing and laying of GI pipe of A ( light ) class as per IS :1239 ( part-I ) or amended up to date. make for submercible cable exeternal work 40 mm dia complete in all respect. | 6 | RM | |
21 | 21 | a) 80mm | 1 | Each | |
22 | 22 | Supply and installing Double flanged Sluice valves as per IS :14846 of 80mm diameter with cap and giving Satisfactory test complete and or so directed by Engineer . It also include cost of labour , jointing material with nuts & bolt and Rubber sheet. | 1 | Each | |
23 | 23 | Supply & installation of 100 mm dia sealed diaphragm burden type pressure gauge of range 0 to 10 kg along with all jointing material as per specification with safety cover. | 1 | Each | |
24 | 24 | Poviding and fixing and installation, testing and commissioning of double flanged of 80 mm dia woltman type Bulk water meter with removable mechanism, of class B conforming to ISO 4064/1 or amended upto date of approved make including cost of all material and labour as per specifications with GI Box ( sheet 16 SWG) suitable for following dia water meter with locking arrangement. including all accessories of following dia. A) 80 mm | 1 | Each | |
25 | 25 | Providing and Installation,of Electric control feeder panel for Submersible pump set ( with automatic Star- Delta oil immersed) with all required components/items/hardware / and conforming to enclosed drawing and specification and including all mounting on CC M15 1:2:4 platform of size 900 mm X 450mm as per detailed specification. | |||
26 | 26 | a) above 10 HP & up to 15.0 HP | 1 | Each | |
27 | 27 | Plat Earthing as per IS : 3043 of panel board using G.I Earth plate of size 600 mm * 600 mm *6 mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. welded on casing pipe of t/w and copper wire of 8 SWG . This includes excavation of trench ,all hardware and material . Complete in all respect. | 1 | Each | |
28 | 28 | Providing & fixing of pump safety cage as per specification or as directed by Engineer in charge. | 1 | Each | |
29 | 29 | Supply of ERW MS black casing pipe ISI Marked ( IS : 4270/2001 ) or amended up to date of 200 mm dia nominal bore (5.4 mm thickness of pipe & mass of tube 28.46 Kg/mtr.) of grade Fe410 | 76 | RM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail