Tender For Training Setup For Collaborative Robot ( Cobot ) =Training Setup For Collaborative Robot ( Cobot ) , Specifications: 1. Collaborative Robot ( Cobot ) 6 Axis, 2. Payload 5Kg ( Minimum ) . 3. Reach 500 Mm To 1000 Mm Radius ( This Is A, College of Engineering Pune-Maharashtra

Tender For Training Setup For Collaborative Robot ( Cobot ) =Training Setup For Collaborative Robot ( Cobot ) , Specifications: 1. Collaborative Robot ( Cobot ) 6 Axis, 2. Payload 5Kg ( Minimum ) . 3. Reach 500 Mm To 1000 Mm Radius ( This Is A Preferable Range ) 4. Position Repeatability + / -0.1 ( Minimum ) . 6. High Speed Operation Mode 600 Mm / Sec ( Minimum ) , Collaborative Operation Mode ( Standardoperation ) 100 Mm / Sec ( Minimum ) And Collaborative Operation Mode ( Low Speed Operation ) 20 Mm / Sec ( Minimum ) 7. Teach Pendentwith 7M ( Minimum ) Cable Length. 8. Safety Equipment Indicator: Multicolour Led Display Robot Status. 10. Cobot Can Be Directly Interface With Electric Gripper / Force Sensor / Vision ( Plug And Play ) . 11. Air Piping, Pneumatic Tubing For Gripper Actuation. 12. Built-In Solenoid Valve Set For Gripper Actuation ( Pneumatic ) . 13. Standard Dis And Dos And Safety Dis / Dos. 14. Ethernet Compatibility. 16. Appropriate Safety Certification ( Third Party Certification ) 17. Inbuilt Dual Channel Safety Interface Like Emergency, Safety Door And Mode Selection. 18. Compact Controller With Interface Card. 19. Appropriate Memory Capacityfor Controller. 20. Programming Software - User-Friendly Software And The Versatility Needed To Accelerate Teaching, Learning And Robotics Research - Installed In Tab / Laptop Just Drag And Drop Ofinstructions-Ros Compatible In Addition To Open Api, Simulation Software For Pc For Programming, Simulation, Modelling, And Layout / Navigational Examinations. 21. In-House Training -Supplier Shall Provide Foc Training To Coep Team. 22. Installation Environment :- 00 To 450 23. Suitable Table For Mounting A Cobot 24. Suitable Stabilizer 25. Electric Gripper - Suitablegripper Interfaced With Cobot With Required Accessories. 26. Pneumatic Gripper - Pneumatic Parallel Grippers Having Min. 2 Fingers On One Gripper Provided Withregulator & Pressure Switch, Required Pneumatic Tubing, Fittings, Accessories And Suitable Compressor. 27. Vision Interface System For Pick And Place Application - Vision System With Min 2Mp Camera, Lens, Light And Required Accessories For Pickand Place Application.

INR 4500 /-

INR 75000.0 /-

Refer document