Border Security Force-BSF has published Construction Of Underground Water Storage Tank And Pump House Construction Of Underground Water Storage Tank And Pump House At Singhpura Campus Under Shq Bsf Baramulla .. Submission Date for this Tender is 23-04-2021. Pump House Construction Tenders in BSF Campus Singhpora Baramulla Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Name of Work: CONSTRUCTION OF UNDERGROUND WATER STORAGE TANK AND PUMP HOUSE AT SINGHPURA CAMPUS UNDER SHQ BSF BARAMULLA. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. | 250.73 | Cum | |
2 | 2 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | 7.46 | Cum | |
3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal | 8.81 | Cum | |
4 | 4 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approveddesign mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/ cum.Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level | 41.67 | Cum | |
5 | 5 | Centering and shuttering including strutting, propping etc. and removal of form for : | |||
6 | 6 | Foundations, footings, bases of columns, etc. for mass concrete | 32.48 | Sqm | |
7 | 7 | Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc | 139.47 | Sqm | |
8 | 8 | Suspended floors, roofs, landings, balconies and access platform | 71.06 | Sqm | |
9 | 9 | Extra for shuttering in circular work (20% of respective centering and shuttering items) | 44.14 | Sqm | |
10 | 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Cold twisted bars | 4167.13 | Kg | |
11 | 11 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) | 143.27 | Sqm | |
12 | 12 | 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) | 90.37 | Sqm | |
13 | 13 | Extra for providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers.per bag of 50kg cement used in the mix | 60 | Per bag of 50 kg cement | |
14 | 14 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with | 45.67 | Sqm | |
15 | 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) | 7.45 | Cum | |
16 | 16 | Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 284.38 | Kg | |
17 | 17 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade | 25 | Sqm | |
18 | 18 | Providing corrugated G.S. sheet roofing including vertical / curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cuttingto size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² | 18 | Sqm | |
19 | 19 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work 100 mm dia nominal bore | 80 | Mtr | |
20 | 20 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :100 mm nominal bore | 5 | Each | |
21 | 21 | Providing and fixing gun metal non- return valve of approved quality (screwed end) :100 mm nominal bore Vertical | 5 | Each | |
22 | 22 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :100 mm nominal bore | 20 | Each | |
23 | 23 | Providing and fixing MS Flange for 110 mm dia pipe having thickness 10 mm with 4 no nut bolt and rubber gasket. | 10 | Each | |
24 | 24 | Providing and fixing MS Flange for 150 mm dia pipe having thickness 10 mm with 4 no nut bolt and rubber gasket. | 10 | Each | |
25 | 25 | Providing and fixing G.I. TEE in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :100 mm nominal bore | 6 | Each | |
26 | 26 | Add 25.43% Cost Index Except item 19 to 25 | 1.17803e+06 | enh |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail